-
Mikrochimica Acta Jun 2024A cancer-targeted glutathione (GSH)-gated theranostic probe (CGT probe) for intracellular miRNA imaging and combined treatment of self-sufficient starvation therapy...
A cancer-targeted glutathione (GSH)-gated theranostic probe (CGT probe) for intracellular miRNA imaging and combined treatment of self-sufficient starvation therapy (ST) and chemodynamic therapy (CDT) was developed. The CGT probe is constructed using MnO nanosheet (MS) as carrier material to adsorb the elaborately designed functional DNAs. It can be internalized by cancer cells via specific recognition between the AS1411 aptamer and nucleolin. After CGT probe entering the cancer cells, the overexpressed GSH, as gate-control, can degrade MS to Mn which can be used for CDT by Fenton-like reaction. Simultaneously, Mn-mediated CDT can further cascade with the enzyme-like activities (catalase-like activity and glucose oxidase-like activity) of CGT probe, achieving self-sufficient ST/CDT synergistic therapy. Meanwhile, the anchored DNAs are released, achieving in situ signal amplification via disubstituted-catalytic hairpin assembly (DCHA) and FRET (fluorescence resonance energy transfer) imaging of miR-21. The in vitro and in vivo experiments demonstrated that accurate and sensitive miRNA detection can be achieved using the CGT probe. Overall, the ingenious CGT probe opens a new avenue for the development of early clinical diagnosis and cancer therapy.
Topics: MicroRNAs; Humans; Glutathione; Fluorescence Resonance Energy Transfer; Animals; Manganese Compounds; Oxides; Aptamers, Nucleotide; Mice; Mice, Nude; Theranostic Nanomedicine; Nucleolin; Neoplasms; Nanostructures; Oligodeoxyribonucleotides; Mice, Inbred BALB C; Fluorescent Dyes
PubMed: 38951214
DOI: 10.1007/s00604-024-06503-0 -
Current Microbiology Jul 2024Myxococcus xanthus synthesizes polyphosphates (polyPs) with polyphosphate kinase 1 (Ppk1) and degrades short- and long-chain polyPs with the exopolyphosphatases, Ppx1...
Myxococcus xanthus synthesizes polyphosphates (polyPs) with polyphosphate kinase 1 (Ppk1) and degrades short- and long-chain polyPs with the exopolyphosphatases, Ppx1 and Ppx2, respectively. M. xanthus polyP:AMP phosphotransferase (Pap) generates ADP from AMP and polyPs. Pap expression is induced by an elevation in intracellular polyP concentration. M. xanthus synthesized polyPs during the stationary phase; the ppk1 mutant died earlier than the wild-type strain after the stationary phase. In addition, M. xanthus cells cultured in phosphate-starved medium, HO-supplemented medium, or amino acid-deficient medium increased the intracellular polyP levels by six- to ninefold after 6 h of incubation. However, the growth of ppk1 and ppx2 mutants in phosphate-starved medium and HO-supplemented medium was not significantly different from that of wild-type strain, nor was there a significant difference in fruiting body formation and sporulation in starvation condition. During development, no difference was observed in the adenylate energy charge (AEC) values in the wild-type, ppk1 mutant, and pap mutant strains until the second day of development. However, after day 3, the ppk1 and pap mutants had a lower ADP ratio and a higher AMP ratio compared to wild-type strain, and as a result, the AEC values of these mutants were lower than those of the wild-type strain. Spores of ppk1 and pap mutants in the nutrient medium germinated later than those of the wild-type strain. These results suggested that polyPs produced during development may play an important role in cellular energy homeostasis of the spores by being used to convert AMP to ADP via Pap.
Topics: Polyphosphates; Myxococcus xanthus; Spores, Bacterial; Bacterial Proteins; Phosphotransferases (Phosphate Group Acceptor); Acid Anhydride Hydrolases; Culture Media
PubMed: 38951187
DOI: 10.1007/s00284-024-03778-7 -
Scientific Reports Jul 2024Plant growth and high yields are secured by intensive use of nitrogen (N) fertilizer, which, however, pollutes the environment, especially when N is in the form of...
Plant growth and high yields are secured by intensive use of nitrogen (N) fertilizer, which, however, pollutes the environment, especially when N is in the form of nitrate. Ammonium is oxidized to nitrate by nitrifiers, but roots can release biological nitrification inhibitors (BNIs). Under what conditions does root-exudation of BNIs facilitate nitrogen N uptake and reduce pollution by N loss to the environment? We modeled the spatial-temporal dynamics of nitrifiers, ammonium, nitrate, and BNIs around a root and simulated root N uptake and net rhizosphere N loss over the plant's life cycle. We determined the sensitivity of N uptake and loss to variations in the parameter values, testing a broad range of soil-plant-microbial conditions, including concentrations, diffusion, sorption, nitrification, population growth, and uptake kinetics. An increase in BNI exudation reduces net N loss and, under most conditions, increases plant N uptake. BNIs decrease uptake in the case of (1) low ammonium concentrations, (2) high ammonium adsorption to the soil, (3) rapid nitrate- or slow ammonium uptake by the plant, and (4) a slowly growing or (5) fast-declining nitrifier population. Bactericidal inhibitors facilitate uptake more than bacteriostatic ones. Some nitrification, however, is necessary to maximize uptake by both ammonium and nitrate transporter systems. An increase in BNI exudation should be co-selected with improved ammonium uptake. BNIs can reduce N uptake, which may explain why not all species exude BNIs but have a generally positive effect on the environment by increasing rhizosphere N retention.
Topics: Nitrification; Nitrogen; Plant Roots; Soil Microbiology; Nitrates; Plants; Ammonium Compounds; Soil; Rhizosphere; Fertilizers
PubMed: 38951138
DOI: 10.1038/s41598-024-65247-2 -
International Journal of Biological... Jun 2024Softness is a crucial criterion in assessing the comfort and usability of tissue paper. Flexible fibers contribute to the softness of the tissue paper by allowing the...
Softness is a crucial criterion in assessing the comfort and usability of tissue paper. Flexible fibers contribute to the softness of the tissue paper by allowing the sheets to conform to the contours of the skin without feeling rough or abrasive. This study focuses on developing innovative CGG/APAM/PDA hydrogels with interpenetrating networks consisting of cationic guar gum, anionic polyacrylamide, and polydopamine for cellulase immobilization, aimed at improving bamboo fiber flexibility. Cellulase biomolecules are efficiently immobilized on CGG/APAM/PDA hydrogels through the Schiff base reaction. Immobilized cellulases have a wider pH applicability than free cellulases, good storage stability, and can maintain high relative activity at relatively high temperatures. The treatment of bamboo fibers with immobilized cellulase results in a significant increase in flexibility, reaching 6.90 × 10 N·m, which is 7.18 times higher than that of untreated fibers. The immobilization of cellulases using CGG/APAM/PDA hydrogels as carriers results in a substantial enhancement of storage stability, pH applicability, and inter-fiber bonding strength, as well as the capacity to sustain high relative enzymatic activity at elevated temperatures. The immobilization of cellulase within CGG/APAM/PDA interpenetrating network hydrogels presents a viable strategy for enhancing bamboo fiber flexibility, thereby expanding the accessibility of tissue products.
PubMed: 38950801
DOI: 10.1016/j.ijbiomac.2024.133168 -
Journal of Chemical Theory and... Jul 2024A vibrational electronic-thermofield coupled cluster (VE-TFCC) approach is developed to calculate thermal properties of non-adiabatic vibronic coupling systems. The...
A vibrational electronic-thermofield coupled cluster (VE-TFCC) approach is developed to calculate thermal properties of non-adiabatic vibronic coupling systems. The thermofield (TF) theory and a mixed linear exponential ansatz based on second-quantized Bosonic construction operators are introduced to propagate the thermal density operator as a "pure state" in the Bogoliubov representation. Through this compact representation of the thermal density operator, the approach is basis-set-free and scales classically (polynomial) as the number of degrees of freedoms (DoF) in the system increases. The VE-TFCC approach is benchmarked with small test models and a real molecular compound (CoF anion) against the conventional sum over states (SOS) method and applied to calculate thermochemistry properties of a gas-phase reaction: CoF + F → CoF. Results shows that the VE-TFCC approach, in conjunction with vibronic models, provides an effective protocol for calculating thermodynamic properties of vibronic coupling systems.
PubMed: 38950345
DOI: 10.1021/acs.jctc.4c00338 -
Angewandte Chemie (International Ed. in... Jul 2024An organophosphorus redox-catalyzed method for the direct electrophilic cyanation of C(sp2)-H nucleophiles with sodium cyanate (NaOCN) is reported. The catalytic...
An organophosphorus redox-catalyzed method for the direct electrophilic cyanation of C(sp2)-H nucleophiles with sodium cyanate (NaOCN) is reported. The catalytic deoxyfunctionalization of the OCN- anion is enabled by the use of a small-ring phosphacyclic (phosphetane) catalyst in combination with a terminal hydrosilane O-atom acceptor and a malonate-derived bromenium donor. In situ spectroscopy under single-turnover conditions demonstrate that insoluble inorganic cyanate anion is activated by bromide displacement on a bromophosphonium catalytic intermediate to give a reactive N-bound isocyanatophosphonium ion, which delivers electrophilic "CN+" equivalents to nucleophilic (hetero)arenes and alkenes with loss of a phosphine oxide. These results demonstrate the feasibility of deoxyfunctionalization of insoluble inorganic salts by PIII/PV=O catalyzed phase transfer activation.
PubMed: 38950149
DOI: 10.1002/anie.202409854 -
Dental and Medical Problems 2024Despite the superiority of glass-ionomer cements (GICs) over composites in treating white spot lesions (WSLs), there is still a concern about their preventive and...
BACKGROUND
Despite the superiority of glass-ionomer cements (GICs) over composites in treating white spot lesions (WSLs), there is still a concern about their preventive and antibacterial properties. Efforts have been made to improve the strength of their bond to demineralized enamel, fluoride release and antibacterial properties by adding nanoparticles of chitosan, which seems to be a promising method.
OBJECTIVES
The aim of the present study was to assess the antibacterial effect, the microshear bond strength (μSBS) to enamel at the WSL area, and the fluoride and nano-chitosan release after modifying the polyacrylic acid liquid phase of a traditional GIC with different nano-chitosan volumes.
MATERIAL AND METHODS
A total of 120 samples were prepared, and then divided into 4 groups (n = 30): G1 - non-modified GIC, which served as a control group, while G2, G3 and G4 were modified with different nano-chitosan volumes (50%, 100% and 150%, respectively). Microshear bond strength was assessed using a universal testing machine (UTM) after storage in distilled water for 24 h. Fluoride and nanochitosan release was measured with the use of spectrophotometers at different time points (initially, and at 1 h, 24 h, 48 h, 72 h, 1 week, 2 weeks, 3 weeks, and 6 weeks) after storage in distilled water. The antibacterial effect against the Streptococcus aureus strain was assessed with the agar diffusion test. The data was statistically analyzed.
RESULTS
After 24-hour storage, G2 recorded a slight, yet non-significant, increase in the μSBS values (4.1 ±0.94 MPa) as compared to G1 (3.9 ±1.30 MPa). With regard to fluoride release, the amount recorded for G1 was significantly greater at the end of the 24-hour storage period (0.70 ±0.30 μmf/cm2) than modified nano-chitosan GIC groups; G1 was followed by G4 (0.54 ±0.34 μmf/cm2). The highest amount of nano-chitosan release after 24-hour storage was noted for G3 (0.85 ±0.00 μmf/cm2). The highest inhibition zone value was recorded for G2.
CONCLUSIONS
Glass-ionomer cement modified with 50% nano-chitosan was shown to positively affect μSBS and the antibacterial effect, while modification with 150% nano-chitosan significantly increased fluoride release.
Topics: Chitosan; Anti-Bacterial Agents; Glass Ionomer Cements; Dental Caries; In Vitro Techniques; Fluorides; Humans; Nanoparticles; Shear Strength; Dental Enamel; Materials Testing; Dental Bonding
PubMed: 38949834
DOI: 10.17219/dmp/158835 -
Environmental Monitoring and Assessment Jun 2024We assessed the hydrochemistry of 15 watersheds in the Halton Region, southern Ontario, in high resolution (n > 500 samples across n > 40 streams) to...
We assessed the hydrochemistry of 15 watersheds in the Halton Region, southern Ontario, in high resolution (n > 500 samples across n > 40 streams) to characterize water quality dynamics and governing controls on major and trace element concentrations in this rapidly urbanizing region. In 2022, major water quality parameters were generally in line with historic monitoring data yet significantly different across catchments, e.g., in specific conductance, turbidity, phosphate and chloride, and trace element concentrations. Distinct hydrochemical signatures were observed between urban and rural creeks, with urban stream sections and sites near the river mouths close to Lake Ontario having consistently higher chloride (up to 700 mg/L) and occasional enrichment in nutrients levels (up to 8 and 20 mg/L phosphate and nitrate, respectively). Particularly upper reaches exhibited hydrochemical signatures that were reflective of the catchment surface lithologies, for instance through higher dissolved Ca to Mg ratios. Unlike for chloride and phosphate, provincial water quality guidelines for trace elements and heavy metals were seldom surpassed (on < 10 occasions for copper, zinc, cadmium, and uranium). Concentrations of other trace elements (e.g., platinum group elements or rare earth elements) were expectedly low (< 0.3 µg/L) but showed spatiotemporal concentration patterns and concentration-discharge dynamics different from those of the major water quality parameters. Our results help improve the understanding of surface water conditions within Halton's regional Natural Heritage Systems and demonstrate how enhanced environmental monitoring can deliver actionable information for watershed decision-making.
Topics: Environmental Monitoring; Ontario; Water Pollutants, Chemical; Water Quality; Rivers; Trace Elements; Metals, Heavy; Chlorides; Water Pollution, Chemical
PubMed: 38949676
DOI: 10.1007/s10661-024-12833-6 -
ACS Applied Materials & Interfaces Jul 2024Electronic devices employing two-dimensional (2D) van der Waals (vdW) transition-metal dichalcogenide (TMD) layers as semiconducting channels often exhibit limited...
Electronic devices employing two-dimensional (2D) van der Waals (vdW) transition-metal dichalcogenide (TMD) layers as semiconducting channels often exhibit limited performance (e.g., low carrier mobility), in part, due to their high contact resistances caused by interfacing non-vdW three-dimensional (3D) metal electrodes. Herein, we report that this intrinsic contact issue can be efficiently mitigated by forming the 2D/2D in-plane junctions of 2D semiconductor channels seamlessly interfaced with 2D metal electrodes. For this, we demonstrated the selectively patterned conversion of semiconducting 2D PtSe (channels) to metallic 2D PtTe (electrodes) layers by employing a wafer-scale low-temperature chemical vapor deposition (CVD) process. We investigated a variety of field-effect transistors (FETs) employing wafer-scale CVD-2D PtSe/2D PtTe heterolayers and identified that silicon dioxide (SiO) top-gated FETs exhibited an extremely high hole mobility of ∼120 cm V s at room temperature, significantly surpassing performances with previous wafer-scale 2D PtSe-based FETs. The low-temperature nature of the CVD method further allowed for the direct fabrication of wafer-scale arrays of 2D PtSe/2D PtTe heterolayers on polyamide (PI) substrates, which intrinsically displayed optical pulse-induced artificial synaptic behaviors. This study is believed to vastly broaden the applicability of 2D TMD layers for next-generation, high-performance electronic devices with unconventional functionalities.
PubMed: 38949620
DOI: 10.1021/acsami.4c06540 -
Biomaterials Science Jul 2024Zwitterionic carboxyalkyl poly(1-vinylimidazole) (CA-PVIm) polymers with imidazolium cations and carboxylate anions have been synthesized as a carrier for the delivery...
Zwitterionic carboxyalkyl poly(1-vinylimidazole) (CA-PVIm) polymers with imidazolium cations and carboxylate anions have been synthesized as a carrier for the delivery of plasmid DNA (pDNA) to skeletal muscle. From differential scanning calorimetry measurements, resulting CA-PVIm had intermediate water in hydration water as a biocompatible polymer. Notably, when the pDNA and resulting CA-PVIm were mixed, slight retarded bands of the pDNA were observed in agarose gel electrophoresis, suggesting the polyion complex (PIC) formation between the pDNA and CA-PVIm despite zwitterionic polymers. Resulting PICs maintained the higher-order structure of the pDNA. Using resulting pDNA PICs, the highest pDNA expression by intramuscular injection was achieved in the PIC with 7 mol% carboxymethylated PVIm, that is, CA(7)-PVIm, observed in a widespread area by imaging system. These results suggest that the CA(7)-PVIm/pDNA PIC is effective for the diffusive delivery of the pDNA into skeletal muscle for the treatment of serious muscle diseases.
PubMed: 38949480
DOI: 10.1039/d4bm00510d