-
Brazilian Dental Journal 2024This study aimed to determine the effect of adding selenium nanoparticles (SeNPs) to mineral trioxide aggregate (MTA HP) concerning alkalinizing potential. Additionally,...
This study aimed to determine the effect of adding selenium nanoparticles (SeNPs) to mineral trioxide aggregate (MTA HP) concerning alkalinizing potential. Additionally, it examined the set material after SeNPs incorporation using Field Emission Scanning Electron Microscopy with Energy Dispersive X-ray analysis (FE-SEM/EDX) for characterizing the elemental composition and morphological alterations resulting from the integration of SeNPs. Cement samples, both before and after SeNPs incorporation, were examined using FE-SEM/EDX. The pH level was also measured with a pH-meter previously calibrated with solutions of known pH, to evaluate the alkalinizing activity of the integrated substance at different concentrations of nanoparticles: Group 1 (control): 0% w/w SeNPs, Group 2: 0.5% w/w SeNPs, Group 3: 1% w/w SeNPs, Group 4: 1.5% w/w SeNPs and Group 5: 2% w/w SeNPs after 1, 7, 14, and 30 days in distal water. The data were analyzed by one-way ANOVA and Tukey tests (P≤0.05). According to FE-SEM/EDX, the morphological characteristics indicate that SeNPs were successfully dispersed and integrated into the MTA repair matrix. EDX examination validates the presence of Selenium, confirming successful integration. The findings confirmed that the MTAHP showed a high pH level with a discernible reduction in the alkalinizing activity with each incorporated concentration of (SeNPs) that significantly differed from the control group across various periods at (P≤ 0.05). Consequently, the findings indicate that the addition of SeNPs to MTA HP has a notable impact on the pH of the storage solution, leading to a significant decrease in pH values for all concentrations and periods when compared to the control group. The alkalinizing action of MTA HP is highly affected by the incorporated SeNPs, making it more suitable for application in pulpal tissue. This study contributes to our understanding of the morphological alterations and elemental composition of SeNP-incorporated MTA HP, enhancing its potential applications in dental and tissue regeneration.
PubMed: 38922250
DOI: 10.1590/0103-6440202405760 -
Brazilian Dental Journal 2024Studies regarding cytotoxic effects attributed to the use of adhesive bonding agents on pulp tissue are not conclusive. To point out whether these materials are safe for...
Studies regarding cytotoxic effects attributed to the use of adhesive bonding agents on pulp tissue are not conclusive. To point out whether these materials are safe for clinical use, in vivo exposure of dental pulp to adhesive bonding agents was simulated using an experimental setup in which Human Dental Pulp Stem Cells (hDPSC) are exposed to the action of two kinds of adhesives: self-etching adhesives and two-step bonding agents through a dentine barrier. Cytotoxic effects on these cells were evaluated by MTT assay protocol and fluorescence microscopy, and their results were contrasted to those obtained through Raman spectra taken on single hDPSCs. Overall, no significant cytotoxic effects were observed by combining all the techniques, and cell viability close to 90% was achieved for a dentine barrier of at least 1 mm thick. Moreover, Raman spectroscopy was able to detect structural DNA damage in some dental pulp cells when exposed to two-step bonding agents, suggesting that this technique could be considered a complementary tool with the potential to evaluate cell toxicity beyond cell viability.
Topics: Humans; Dental Pulp; Stem Cells; Spectrum Analysis, Raman; Dentin-Bonding Agents; Cell Survival; Microscopy, Fluorescence; Cells, Cultured
PubMed: 38922248
DOI: 10.1590/0103-6440202405529 -
Brazilian Oral Research 2024To evaluate the effect of acidic challenge on erosion depth and topographic characteristics of different materials used as occlusal sealants. Two hundred specimens of...
To evaluate the effect of acidic challenge on erosion depth and topographic characteristics of different materials used as occlusal sealants. Two hundred specimens of five sealant materials (Fuji IX, Ketac Molar, Fuji II, Equia and Clinpro) and forty bovine teeth enamel samples (control) were prepared and exposed to acidic challenge. The specimens were immersed in four different solutions (orange juice, coke drink, citric acid or distilled water) under mildly shaken conditions for 3 days. The erosion depth profiles were measured using a profilometer and Scanning Electron Microscope (SEM). Two-way ANOVA with Tukey post-hoc test was performed to evaluate the interactions. Sealant material and acidic challenge had significant effects on erosion depth. Among the materials, Fuji II presented the highest mean of erosion depth after immersion in orange juice, coke drink, and citric acid. All materials groups presented higher erosion depth values after immersion in the citric acid solution, except Clinpro. Bovine enamel presented higher erosion depth values compared to all materials when submitted to erosive challenge. Sealant materials submitted to the acidic challenge presented different degrees of erosion and topographic modification; however, they are less susceptible to erosion than bovine teeth enamel.
Topics: Cattle; Animals; Tooth Erosion; Dental Enamel; Materials Testing; Citric Acid; Microscopy, Electron, Scanning; Pit and Fissure Sealants; Analysis of Variance; Time Factors; Surface Properties; Glass Ionomer Cements; Reproducibility of Results; Carbonated Beverages; Reference Values; Hydrogen-Ion Concentration; Composite Resins
PubMed: 38922213
DOI: 10.1590/1807-3107bor-2024.vol38.0053 -
Biomimetics (Basel, Switzerland) Jun 2024Zeolite can release antimicrobial silver ions in a targeted and controlled manner for an extended time, selectively inhibiting the growth of pathogenic oral bacteria...
BACKGROUND
Zeolite can release antimicrobial silver ions in a targeted and controlled manner for an extended time, selectively inhibiting the growth of pathogenic oral bacteria when added to dental materials. The objective of this study was to investigate the effect of the addition of zeolite to silver-reinforced glass ionomer cement on the release of silver ions over time.
METHODS
Five concentrations of silver-zeolite (0%, 0.5%, 1%, 2%, 4% wt) were incorporated into silver-reinforced GIC in the form of 10 mm × 2 mm circular disks ( = 5). The disks were incubated in deionized water at 37 °C and ion release from the samples was measured at 1, 2, 7, and 30 days after immersion by inductively coupled atomic emission spectroscopy.
RESULTS
Incorporating silver-zeolite increased silver ion release from silver-reinforced GIC disks compared to the control disks ( < 0.05), while incorporating zeolite alone had no effect. Higher concentrations of added silver-zeolite resulted in increased silver ion release. Sustained silver ion release was observed for up to 30 days.
CONCLUSION
Adding silver-zeolite to silver-reinforced GIC may enhance its extended antibacterial effect in the oral cavity.
PubMed: 38921245
DOI: 10.3390/biomimetics9060365 -
Dentistry Journal Jun 2024In pediatric and operative dentistry, caries treatment benefits from a therapeutic option based on the use of silver fluoride (AgF) associated with potassium iodide (KI)...
In pediatric and operative dentistry, caries treatment benefits from a therapeutic option based on the use of silver fluoride (AgF) associated with potassium iodide (KI) to avoid dark colorations on dental tissues. The objective of this in vitro study is to evaluate the retention of glass ionomer cement (GIC) on a dentin when treated with AgF and KI. Twenty-two healthy human permanent molars and eight human primary teeth, all free of any decay, were cut to obtain occlusal flat dentinal surfaces and were then treated with AgF for a duration of 60 s. For half of the teeth, a drop of KI was applied for a duration of 30 s. All samples were covered with a plot of GIC and their resistance to shear bond strength was measured. The fracture resistance in both permanent and primary teeth does not show any statistically significant differences whether KI was applied or not. For permanent teeth, the resistance is slightly higher in the group treated with KI than in the group treated with AgF alone. To our knowledge, these data are the first to describe the possible application of KI both on primary and permanent teeth. In any case, further studies are needed to investigate the bond strength between dentin and GIC on a wider range of samples.
PubMed: 38920878
DOI: 10.3390/dj12060177 -
Dentistry Journal May 2024To compare the clinical effectiveness of ion-releasing restorations (IRR) vs. composite resin (CR) in dental restorations. (Review)
Review
BACKGROUND
To compare the clinical effectiveness of ion-releasing restorations (IRR) vs. composite resin (CR) in dental restorations.
METHODS
A systematic search was carried out from articles published until January 2024, in the biomedical databases: PubMed, Cochrane Library, Scielo, Scopus, Web of Science and Google Scholar. Randomized clinical trials were included, with a follow-up time greater than or equal to 1 year, without time and language limits and which reported the clinical effect of IRR compared to CR in dental restorations. The RoB 2.0 tool was used to assess the risk of bias of the included studies and the GRADEPro GDT tool was used to assess the quality of evidence and the strength of recommendation of the results.
RESULTS
The search yielded a total of 1109 articles. After excluding those that did not meet the selection criteria, 29 articles remained for the quantitative synthesis. The analysis found no statistically significant difference when comparing the dental restorations with IRRs or CRs.
CONCLUSION
The literature reviewed suggests that there are no differences between the IRRs and CRs in dental restorations.
PubMed: 38920859
DOI: 10.3390/dj12060158 -
Acta Odontologica Latinoamericana : AOL Apr 2024Coloured compounds (anthocyanins) in açaí can stain resin-modified glass-ionomer cement (RMGIC) due to its low staining resistance.
UNLABELLED
Coloured compounds (anthocyanins) in açaí can stain resin-modified glass-ionomer cement (RMGIC) due to its low staining resistance.
AIM
The aim of this study was to assess whether açaí compromises the surface colour and roughness of RMGIC in vitro.
MATERIALS AND METHOD
Disc-shaped specimens (2 mm thick, 8 mm in diameter) of Vitremer™ (3M ESPE, St Paul, MN, USA) were prepared according to the manufacturer 's instructions. The mixture was inserted into a silicone mouldplaced between two mylar strips, and light cured. Specimens were randomly divided into three groups (n=25) according to the solutions to be used for chemical degradation: artificial saliva (control), açaí sorbet and açaí juice. A spectrophotometer CM-2600d/2500d (Konica Minolta, Tokyo, Japan) was used to analyse the colour (CIELa*b* scale). Surface roughness (Ra, mm) was measuredusing theprofilometer Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan). The specimens were subjected to three daily soaks (6 ml, 15 minutes) for 14 days at 37°C. They were washed in distilled water and placed in fresh saliva (30 minutes in the interval). After the third soak in a day, they were stored in fresh saliva overnight. Outcomes were analysed at baseline (L*, a*, b*, Ra) and after degradation (L'*, a'*, b'*, Ra').
RESULTS
The pH values of saliva, sorbet, and juice were 7.0, 3.8, and 4.9, respectively. ΔE* values were 6.6 for saliva, 6.9 for sorbet and 7.8 for juice. There was a significant ΔE* difference between saliva (p=0.005) and juice (p=0.002), and between juice and sorbet (p=0.019), but none between saliva and sorbet (p=0.401). There was no significant Δb* difference between the solutions. No difference between juice and sorbet was observed for Δa*, but they were significantly different from saliva (p<0.001). Brightness (L*) changed significantly. Juice showed the highest ΔE* (7.8) and ΔL* (7.7). No significant change was observed for roughness and there was no difference between the solutions for ARa.
CONCLUSIONS
Açaí and saliva led to unacceptable staining, but no significant roughness changes in the resin-modified glass-ionomer cement.
Topics: Glass Ionomer Cements; Color; Materials Testing; Surface Properties; Carbonated Beverages
PubMed: 38920125
DOI: 10.54589/aol.37/1/40 -
Cureus May 2024Introduction Fixed prosthodontic treatment involves the replacement of missing tooth structures with a variety of materials. Several newer metal-free ceramics have been...
Introduction Fixed prosthodontic treatment involves the replacement of missing tooth structures with a variety of materials. Several newer metal-free ceramics have been developed in recent years to meet patients' aesthetic needs. The long-term performance of all ceramics, however, is unknown, necessitating a continuous evaluation of the materials' strength. Aim The aim of this study was to compare and evaluate the fracture resistance of IPS E max pressable crowns and graphene crowns, which are luted with Rely X U200 self-adhesive resin cement on the respective dies, as well as thermocycling of IPS E max pressable crowns and thermocycling of graphene crowns. The current review was conducted as an in vitro examination at the Division of Prosthodontics, GSL Dental School, Rajahmundry, Andhra Pradesh, India. Materials and methods On a typodont tooth, a shoulder finish line design was prepared and incisal reduction was performed. The tooth was scanned, designed, and milled to produce 18 metal dies made of cobalt-chrome alloy. These metal dies produced a total of (n=36) all-ceramic crowns, which were divided into two groups based on crown type: 18 IPS E max crowns and 18 graphene crowns. The participants were once again divided into two subgroups within each group, with the purpose of assessing fracture resistance. This evaluation was conducted using a universal testing machine both before and after subjecting the specimens to thermocycling. The obtained data were sent for statistical analysis. Results Fracture resistance values were reduced after thermocycling of both IPS E max and Graphene crowns. Without thermocycling, the fracture resistance values of IPS E max crowns were higher than those of graphene crowns. Conclusions The fracture resistance of IPS E max crowns exhibited a statistically significant increase when compared to graphene crowns. Additionally, it was shown that the fracture resistance of both materials was reduced upon exposure to thermocycling.
PubMed: 38919249
DOI: 10.7759/cureus.61097 -
Cureus May 2024To compare the bond strength of two types of resin cement to that of additive manufacturing (AM) or cast cobalt-chromium (Co-Cr) alloys.
OBJECTIVE
To compare the bond strength of two types of resin cement to that of additive manufacturing (AM) or cast cobalt-chromium (Co-Cr) alloys.
MATERIALS AND METHODS
Two types of resin luting cement, composite resin and methyl methacrylate (MMA), were bonded to AM or cast Co-Cr alloys, and shear bond tests were performed after seven days of storage in distilled water at 37°C. Co-Cr alloy adhesive elements AM to the enamel surface of the labial aspect of a bovine mandibular central incisor crown were bonded with two types of resin luting cement and subjected to 1,000 cycles of storage in water for one day and 28 days or thermal cycling, followed by shear bonding tests. Residual cement on the metal and enamel surfaces after the bonding tests was evaluated using an optical microscope. The normality of the results was evaluated using statistical software Statcel4, analysis of variance, or Kruskal-Wallis test, depending on normality, and multiple comparison tests were performed using the Tukey-Kramer or Steel-Dwass tests.
RESULTS
After one day, the shear bond strength (SBS) was 25.9 MPa for Panavia V5 (PV; Kuraray Noritake Dental Corporation, Niigata, Japan) and 23.5 MPa for Super-Bond (SB; Sun Medical Corporation, Shiga, Japan), with no significant difference between the two cement types (P > 0.05). After 28 days, the SBS decreased to 4.1 MPa for PV and 6.7 MPa for SB, showing a significant difference between the two cements (P < 0.05). Following 1,000 thermal cycles, the SBS was 2.0 MPa for PV and 5.6 MPa for SB, with SB exhibiting a significantly higher value (P < 0.05). The adhesive strength was significantly lower after 28 days of storage and thermal cycling compared to after one day of storage (P < 0.05). The Co-Cr alloy exhibited more residual cement on the enamel surface due to interfacial fracture with the resin cement. The Co-Cr alloy showed more residual cement on the enamel surface due to interfacial fracture with the resin cement.
CONCLUSION
MMA-based resin cement showed optimal bond strength and may be suitable for clinical use in computer-aided design (CAD)/computer-aided manufacturing (CAM) orthodontic appliances.
PubMed: 38916016
DOI: 10.7759/cureus.61041 -
Cureus May 2024Dental materials with dentine regenerative properties are preferred over conventional materials. Calcium silicate cements, such as Biodentine, are bioactive and offer...
BACKGROUND
Dental materials with dentine regenerative properties are preferred over conventional materials. Calcium silicate cements, such as Biodentine, are bioactive and offer excellent sealing ability, making them ideal for various dental treatments.
OBJECTIVES
This study aimed to fabricate bioactive calcium silicates infused with titanium (Ti) and strontium (Sr) to optimize their neo-angiogenic, antimicrobial, and regenerative properties while maintaining mechanical stability.
METHODOLOGY
Ti- and Sr-infused calcium silicate cements were synthesized, and their mineral phases were characterized using X-ray diffraction. Morphological and elemental analyses were performed using field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDS). Raman spectroscopy was used to confirm the formation of bioactive material. A hemocompatibility assessment was conducted to evaluate blood compatibility.
RESULTS
The presence of Ca, SiO, and SrTiO mineral phases indicated the successful infusion of Ti and Sr into the calcium silicate cement. FESEM and EDS revealed interconnected small spheres and rods in the silicate network with the relevant elemental compositions. Raman spectra verified that Si-O-Si and Ti-O-Ti vibrations exist, validating the formation of a bioactive material. The hemocompatibility assessment demonstrated optimal blood compatibility.
CONCLUSIONS
This study successfully fabricated an improved calcium silicate-based material with enhanced regenerative properties and excellent biocompatibility. This newly formed substrate holds promise for providing superior restorative solutions and aiding in conservative treatment modalities during dental procedures.
PubMed: 38910673
DOI: 10.7759/cureus.60863