-
Current Medicinal Chemistry Jun 2024The formation of fibrotic bands in female reproductive system, including the uterus, after abdominal and pelvic surgeries, is an important medical challenge associated...
Lysyl Oxidase-like 2 Dysregulation Increases the Risk of Post-Operative Fibrotic Scars Formation in the Female Reproductive Tract: A Novel Therapeutic Target to Reduce Fibrogenesis.
The formation of fibrotic bands in female reproductive system, including the uterus, after abdominal and pelvic surgeries, is an important medical challenge associated with many complications, including infertility and pain. Investigating the role of different molecules involved in fibrosis and adhesion formation may help in the development of new drugs to prevent this disorder. Lysyl oxidase-like 2 (LoxL2) is a copper-dependent enzyme that catalyzes the cross-linking of collagen and elastin fibers in the extracellular matrix (ECM) to stabilize ECM. Dysregulation of LoxL2 activity resulting from tissue hypoxia and inflammation after gynecological surgeries in the female reproductive tract increases collagen fibers cross-linking and promotes fibrosis. It has been shown that targeting LoxL2 by Lox inhibitors may reduce fibrosis. Considering the expression of LoxL2 in female reproductive organs and its dysregulation in hypoxia and inflammation, it is possible that LoxL2 has therapeutic potential as a drug target in the prevention of adhesions. In this review, we discuss the role of LoxL2 in the promotion of fibrotic processes focusing on its link with inflammatory and hypoxic conditions. We also justify the use of anti- LoxL2 agents as a potential therapeutic strategy for the prevention of post-surgical scar formation.
PubMed: 38939993
DOI: 10.2174/0109298673306240240612055116 -
Sensors (Basel, Switzerland) Jun 2024To effectively detect motion sickness induced by virtual reality environments, we developed a classification model specifically designed for visually induced motion...
To effectively detect motion sickness induced by virtual reality environments, we developed a classification model specifically designed for visually induced motion sickness, employing a phase-locked value (PLV) functional connectivity matrix and a CNN-LSTM architecture. This model addresses the shortcomings of traditional machine learning algorithms, particularly their limited capability in handling nonlinear data. We constructed PLV-based functional connectivity matrices and network topology maps across six different frequency bands using EEG data from 25 participants. Our analysis indicated that visually induced motion sickness significantly alters the synchronization patterns in the EEG, especially affecting the frontal and temporal lobes. The functional connectivity matrix served as the input for our CNN-LSTM model, which was used to classify states of visually induced motion sickness. The model demonstrated superior performance over other methods, achieving the highest classification accuracy in the gamma frequency band. Specifically, it reached a maximum average accuracy of 99.56% in binary classification and 86.94% in ternary classification. These results underscore the model's enhanced classification effectiveness and stability, making it a valuable tool for aiding in the diagnosis of motion sickness.
Topics: Humans; Motion Sickness; Electroencephalography; Male; Neural Networks, Computer; Adult; Female; Algorithms; Young Adult; Machine Learning; Virtual Reality
PubMed: 38931723
DOI: 10.3390/s24123936 -
Materials (Basel, Switzerland) Jun 2024This study concerned the in situ investigation of the defect evolution and fracture mechanism of additively manufactured (AM) Ti-6Al-4V under uniaxial tensile tests. In...
This study concerned the in situ investigation of the defect evolution and fracture mechanism of additively manufactured (AM) Ti-6Al-4V under uniaxial tensile tests. In order to achieve this, microstructure characterization was initially carried out in order to identify the defects within the matrix of the candidate material. In situ testing was then performed, focusing on the spherical defect to observe its evolution under tensile loading. It was found that, before the fracture stage, the geometric evolution of the spherical defect towards an ellipse shape was dominated by the load in the tensile direction. In addition, the slip band density was found to be aggravated near the spherical defect due to the geometric discontinuity-induced stress concentration. During the fracture process, the defect geometry evolved as an irregular shape, which was mainly attributed to the micro-void-induced localized multi-axial stress state. The fracture analysis indicated that defects play a key role in crack initiation, leading to the fracture of LPBF materials.
PubMed: 38930257
DOI: 10.3390/ma17122888 -
Gels (Basel, Switzerland) Jun 2024The aim of this work was to synthesize and study the functional properties of polymer-clay nanocomposite (PCNCs) based on poly(sodium 4-styrene sulfonate) (NaPSS) and...
Synthesis and Characterization of Nanocomposite Hydrogels Based on Poly(Sodium 4-Styrene Sulfonate) under Very-High Concentration Regimen of Clays (Bentonite and Kaolinite).
The aim of this work was to synthesize and study the functional properties of polymer-clay nanocomposite (PCNCs) based on poly(sodium 4-styrene sulfonate) (NaPSS) and two types of clay in the dispersed phase: bentonite and kaolinite, in order to advance in the development of new geomimetic materials for agricultural and environmental applications. In this study, the effect of adding high concentrations of clay (10-20 wt. %) on the structural and functional properties of a polymer-clay nanocomposite was evaluated. The characterization by infrared spectroscopy made it possible to show that the PCNCs had a hybrid nature structure through the identification of typical vibration bands of the clay matrix and NaPSS. In addition, scanning electron microscopy allowed us to verify its hybrid composition and an amorphous particle-like morphology. The thermal characterization showed degradation temperatures higher than ~300 °C with Tg values higher than 100 °C and variables depending on the clay contents. In addition, the PCNCs showed a high water-retention capacity (>2900%) and cation exchange capacity (>112 meq/100 g). Finally, the results demonstrated the ability of geomimetic conditioners to mimic the structure and functional properties of soils, suggesting their potential application in improving soil quality for plant growth.
PubMed: 38920951
DOI: 10.3390/gels10060405 -
Nature Chemistry Jun 2024Providing affordable, safe drinking water and universal sanitation poses a grand societal challenge. Here we developed atomically dispersed Au on potassium-incorporated...
Providing affordable, safe drinking water and universal sanitation poses a grand societal challenge. Here we developed atomically dispersed Au on potassium-incorporated polymeric carbon nitride material that could simultaneously boost photocatalytic generation of ·OH and HO with an apparent quantum efficiency over 85% at 420 nm. Potassium introduction into the poly(heptazine imide) matrix formed strong K-N bonds and rendered Au with an oxidation number close to 0. Extensive experimental characterization and computational simulations revealed that the low-valent Au altered the materials' band structure to trap highly localized holes produced under photoexcitation. These highly localized holes could boost the 1e water oxidation reaction to form highly oxidative ·OH and simultaneously dissociate the hydrogen atom in HO, which greatly promoted the reduction of oxygen to HO. The photogenerated ·OH led to an efficiency enhancement for visible-light-response superhydrophilicity. Furthermore, photo-illumination in an onsite fixed-bed reactor could disinfect water at a rate of 66 L HO m per day.
PubMed: 38918581
DOI: 10.1038/s41557-024-01553-6 -
Journal of Colloid and Interface Science Jun 2024In this study, a combination of ab initio modeling and experimental analysis is presented to investigate and elucidate the electronic conductivity of films composed of...
In this study, a combination of ab initio modeling and experimental analysis is presented to investigate and elucidate the electronic conductivity of films composed of conducting polymer blend PEDOT:PSS-PEO. Detailed density functional theory (DFT) calculations, aligned with experimental data, aided at profound understanding of the chemical composition, band structure, and the mechanical behavior of these composite materials. Systematic evaluation across diverse ratios of PEDOT, PSS, and PEO revealed a pronounced transformation in electronic properties. Specifically, the addition of PEO into the polymer matrix remarkably changes the band gap, with a marked alteration observed near a PEO concentration of 52 wt-%. This adjustment led to a substantial enhancement in the electrical conductivity, exhibiting an increase by a factor of approximately 20, compared to the original PEDOT:PSS polymer. The present investigation determined the crucial role of the PEDOT to PSS ratio in band gap determination, emphasizing its significant impact on the material's electrical conductivity. Concurrently, the mechanical property analysis unveiled a consistent increase in Young's modulus, reaching up to 765.93 MPa with increased PEO content, signifying a notable mechanical stiffening of the blend. The obtained combined theoretical and experimental insights illustrate a detailed perspective on the conductivity anomalies observed in PEDOT:PSS-PEO systems, establishing a robust framework for designing highly conducting and mechanically stable polymer blends. This comprehensive approach elucidates the interplay between chemical composition and electronic behavior, offering a strategic pathway for extrusion-based manufacturing techniques such as Direct Ink Writing (DIW).
PubMed: 38917713
DOI: 10.1016/j.jcis.2024.06.148 -
Scientific Reports Jun 2024This study presents the design of four (mm) wideband, high gain, highly efficient metasurface-based 4T4R MIMO (Multiple-Input Multiple-Output) antennas with highly...
This study presents the design of four (mm) wideband, high gain, highly efficient metasurface-based 4T4R MIMO (Multiple-Input Multiple-Output) antennas with highly isolated ports, covering the middle and a portion of the upper bands of the sub 6 GHz 5G frequency spectrum for 5G-based systems, such as IoT (Internet of Things) applications, vehicular communications (e.g., rooftop antennas of cars or trains), smart industries (e.g., farms and factories). The radiating elements of these antennas use the aperture-coupled feeding technique with a dumbbell-shaped slot, a truncated square patch with two U-shaped slots, and a metasurface layer. The proposed MIMO structures place four identical radiating elements like a matrix with successive rotations to produce orthogonal electromagnetic waves, improving the isolation between ports. Six-millimeter spaces are added between these elements, and two vertical and horizontal strip slots are carved on the ground as the decoupling structure to decrease the mutual coupling. Simulation results show that Antenna_1, Antenna_2, and Antenna_3 achieve gain values of 6.2 to 9.4 dBi, 8.2 to 11.6 dBi, 6.2 to 9.5 dBi, below - 35, - 25, and - 33 isolation and almost 10 dB diversity gain from 2.8 to 4.7 GHz, 2.8 to 4.5 GHz, and 2.7 to 4.9 GHz, respectively. As a prototype, Antenna_4 is manufactured, and measurements are performed. It achieves 6.28 to 10.45 dBi gain values, below - 23 dB isolation, and 0.001 envelope correlation coefficient over 2.7 to 4.3 GHz. The results confirm that the proposed MIMO antennas are compatible with the 5G essential requisites.
PubMed: 38914613
DOI: 10.1038/s41598-024-65135-9 -
Analytical Sciences : the International... Jun 2024Organotin compounds (OTC), mainly tributyltin (TBT), have been used since the 1970s as biocides in the composition of antifouling paints. Due to its physical-chemical...
Organotin compounds (OTC), mainly tributyltin (TBT), have been used since the 1970s as biocides in the composition of antifouling paints. Due to its physical-chemical characteristics, TBT has high toxicity to the marine environment affecting non-target organisms. The present study aims to develop a method of direct visual identification of TBT in antifouling paints using the cyclopalladate complex, 4- (2-thiazolylazo) resorcinol (TAR-Pd), synthesized in our laboratory. Tests were performed in blank and in the paint matrix with the following OTC: TBT-O; TBT-Cl; TPT-Cl; DBT-Cl (tributyltin oxide, tributyltin chloride, triphenyltin chloride, dibutyltin chloride), in addition to the SnCl and SnCl compounds (tin IV chloride and tin II chloride), all at a concentration of approximately 20 g/ kg of dry paint). The test was performed by applying paint samples to test bodies and scraping a few tens of milligrams of the dry paint film. The scraped paint samples were submitted to the test, showing a different staining reaction for the TBT-Cl and SnCl samples concerning blank and other samples (TBT-O, TPT, DBT-Cl, and SnCl). Solution tests were performed to characterize reaction products by spectroscopy in the visible band. The method developed has potential for application in real samples, being selective for TBT-Cl and SnCl in an acid medium, obtaining a limit of detection, in the range of 1-10 mg/kg dry paint.
PubMed: 38907795
DOI: 10.1007/s44211-024-00620-9 -
Spectrochimica Acta. Part A, Molecular... Jun 2024A stable and efficient hole-transport material (HTM) is crucial for high-performance perovskite solar cells (PSCs). A...
A stable and efficient hole-transport material (HTM) is crucial for high-performance perovskite solar cells (PSCs). A 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-MeOTAD) being used widely to prepare highly efficient PSCs. However, Spiro-MeOTAD has some limitations due to its complex synthesis, which increases its cost, and it also requires dopants to improve its performance. Therefore, we designed thirteen unique small-molecule-based HTMs (MK1-MK13), which are easy to synthesize, highly cost-effective, and don't require dopants to prepare efficient PSCs. Their electrical and optical properties are then investigated theoretically using advanced quantum chemical approaches. The designed molecules showed lower energy gaps and improved optical and optoelectronic characteristics because of the improved phase inversion geometry. The detailed photo-physical and optoelectronic characteristics have been studied using density functional theory (DFT) and time-dependent (TD-DFT) calculations. Moreover, we investigated the impact of holes and electrons and the density of states, open-circuit voltage, frontier molecular orbital, transition density matrix, and other structural and photovoltaic characteristics of these materials. Among these, the MK3 molecule possesses the much narrower optical band gap of 1.04 eV and absorbance (λ ) of 684 nm, respectively. In addition, a profound investigation of the MK3/PCBM blend shows excellent charge transfer at the acceptor-donor interface. Therefore, our proposed technique is necessary for generating appropriate photovoltaic materials for efficient optoelectronic devices and is helpful in further advancing the field.
PubMed: 38906061
DOI: 10.1016/j.saa.2024.124615 -
Noise & HealthDigital noise reduction (DNR) minimizes the effect of noise on speech signals by continuously monitoring frequency bands in the presence of noise. In the present study,...
AIMS
Digital noise reduction (DNR) minimizes the effect of noise on speech signals by continuously monitoring frequency bands in the presence of noise. In the present study, we explored the effect of DNR technology on speech intelligibility in individuals using hearing aids (HAs) and investigated implications for daily use.
METHODS AND MATERIAL
Eighteen participants with bilateral moderate sensorineural hearing loss (aged 16-45 years) were included. Bilateral receiver-in-the-ear HAs were fitted in the participants. The adaptive and nonadaptive (with a signal-to-noise ratio (SNR) of +5 and -5 dB, respectively) Turkish matrix sentence test (TURMatrix) in noise and free-field hearing assessments, including hearing thresholds with hearing aids, speech recognition thresholds (SRT), and speech discrimination scores, were conducted in two different conditions: HA in the DNR-on and DNR-off conditions.
RESULTS
No significant difference was observed between free-field hearing assessments with the HA in the DNR-off and DNR-on conditions (P > 0.05). Furthermore, the adaptive and nonadaptive TURMatrix revealed significant differences between the scores under the DNR-on and DNR-off conditions (P < 0.05). Nevertheless, under the DNR-on condition, there was no correlation between free-field hearing assessments with HA and TURMatrix results (P > 0.05). However, a significant correlation was observed between SRT scores with HA and TURMatrix scores (adaptive and nonadaptive, +5 and -5 dB SNR, respectively) under the DNR-off condition (P < 0.05).
CONCLUSION
Our study findings suggest that DNR can improve speech intelligibility in noisy environments. Therefore, DNR can enhance an individual's auditory comfort by improving their capacity to grasp speech in background noise.
Topics: Humans; Hearing Aids; Adult; Noise; Male; Middle Aged; Hearing Loss, Sensorineural; Female; Young Adult; Adolescent; Speech Intelligibility; Signal-To-Noise Ratio; Auditory Threshold; Speech Perception; Speech Reception Threshold Test
PubMed: 38904826
DOI: 10.4103/nah.nah_67_23