-
International Journal of Biological... Jun 2024This research uses a novel [email protected] composite sponge was created by encasing TiO nanoparticles in the natural polymers alginate and chitosan, resulting in a...
Synthesis and characterization of a novel TiO@chitosan/alginate nanocomposite sponge for highly efficient removal of As(V) ions from aqueous solutions: Adsorption isotherm, kinetics, experiment and adsorption mechanism optimization using Box-Behnken design.
This research uses a novel [email protected] composite sponge was created by encasing TiO nanoparticles in the natural polymers alginate and chitosan, resulting in a nanocomposite that is both ecologically friendly and biocompatible. Using the generated nanocomposite as a new environmentally friendly adsorbent, As(V) heavy metal ions were effectively removed from aqueous media. The following techniques were used to analyse the physicochemical properties of the obtained materials: pH, FTIR, XRD, BET, SEM, and XPS. Utilizing nitrogen adsorption/desorption isotherms, the [email protected] composite sponge's textural properties were identified. This revealed a BET surface area of 168.42 m/g and a total pore volume of 1.18 cc/g, indicating its porous nature and potential for high adsorption capacity. Examine the effects of temperature, pH, dose, and beginning concentration on adsorption. The adsorption characteristics were determined based on equilibrium and adsorption kinetics measurements. The adsorption process was both pseudo-second-order (PSOE) and Langmuir isothermally fit. Chemisorption was the adsorption method since the adsorption energy was 25.45 kJ·mol. An endothermic and spontaneous adsorption process was indicated by more metal being absorbed as the temperature increased. The optimal conditions for adsorption were optimized via Box-Behnken design software to be pH of 5 in the solution, a dosage of 0.02 g of the [email protected] composite sponge per 25 mL, and an arsenate (As(V)) solution the adsorption capacity was 202.27 mg/g are ideal for efficient adsorption. These parameters are critical in achieving the maximum adsorption capacity of the composite sponge for arsenate, which could be beneficial for water purification applications. Utilizing Design-Expert software's response surface methodology (RSM) and Box-Behnken design (BBD), the adsorption process was optimized with the fewest planned tests. After six successive cycles of adsorption and desorption, the adsorbent stability was confirmed by the adsorbent reusability test without any noticeable decrease in removal efficacy. Additionally, it displayed good efficiency, the same XRD and XPS data before and after reuse, and no change in chemical composition.
PubMed: 38955292
DOI: 10.1016/j.ijbiomac.2024.133513 -
Redox Biology Jun 2024Tumor metabolic reprogramming requires high levels of adenosine triphosphate (ATP) to maintain treatment resistance, which poses major challenges to chemotherapy and...
Tumor metabolic reprogramming requires high levels of adenosine triphosphate (ATP) to maintain treatment resistance, which poses major challenges to chemotherapy and photothermal therapy. Especially, high levels of ATP promote copper ion efflux for limiting the curative effect of cuproptosis. Here, an HS-responsive mesoporous CuCl(OH)-loading chemotherapeutic cisplatin (CDDP) was synthesized, and the final nanoparticle, CDDP@CuCl(OH)-CDs (CDCuCDs), was encapsulated by electrostatic action with carbon dots (CDs). CDCuCDs reacted with overproduction HS in colon tumor to produce photothermic copper sulfide for photothermal therapy. CDDP was released by lysis to achieve chemotherapeutic effects. Importantly, CDDP elevated HO levels in cells through a cascade reaction and continuously transforms HO into highly cytotoxic •OH through chemodynamic therapy between HO and Cu, which enables nanoparticles to generate •OH and improve the chemotherapeutic efficacy. Highly toxic •OH disrupts mitochondrial homeostasis, prohibiting it from performing normal energy-supplying functions. Down-regulated ATP inhibits heat shock protein expression, which promotes the therapeutic effect of mild photothermal therapy and reduces the efflux of intracellular copper ions, thus improving the therapeutic effect of cuproptosis. Our research provides a potential therapeutic strategy using overproduction HS responses in tumors, allowing tumor microenvironment-activated •OH nanogenerators to promote tumor energy remodeling for cancer treatment.
PubMed: 38955114
DOI: 10.1016/j.redox.2024.103260 -
Journal of Environmental Management Jul 2024Chromium contamination from abandoned industrial sites and inadequately managed waste disposal areas poses substantial environmental threat. Microbially induced...
Chromium contamination from abandoned industrial sites and inadequately managed waste disposal areas poses substantial environmental threat. Microbially induced carbonate precipitation (MICP) has shown promising, eco-friendly solution to remediate Cr(VI) and divalent heavy metals. In this study, MICP was carried out for chromium immobilization by an ureolytic bacterium Arthrobacter creatinolyticus which is capable of reducing Cr(VI) to less toxic Cr(III) via extracellular polymeric substances (EPS) production. The efficacy of EPS driven reduction was confirmed by cellular fraction analysis. MICP carried out in aqueous solution with 100 ppm of Cr(VI) co-precipitated 82.21% of chromium with CaCO and the co-precipitation is positively correlated with reduction of Cr(VI). The organism was utilized to remediate chromium spiked sand and found that MICP treatment decreased the exchangeable fraction of chromium to 0.54 ± 0.11% and increased the carbonate bound fraction to 26.1 ± 1.15% compared to control. XRD and SEM analysis revealed that Cr(III) produced during reduction, influenced the polymorph selection of vaterite during precipitation. Evaluation of MICP to remediate Cr polluted soil sample collected from Ranipet, Tamil Nadu also showed effective immobilization of chromium. Thus, A. creatinolyticus proves to be viable option for encapsulating chromium contaminated soil via MICP process, and effectively mitigating the infiltration of Cr(VI) into groundwater and adjacent water bodies.
PubMed: 38955041
DOI: 10.1016/j.jenvman.2024.121300 -
Journal of Colloid and Interface Science Jun 2024The recent coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spurred intense research efforts...
The recent coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spurred intense research efforts to develop new materials with antiviral activity. In this study, we genetically engineered amyloid-based nanofibrils for capturing and neutralizing SARS-CoV-2. Building upon the amyloid properties of a short Sup35 yeast prion sequence, we fused it to SARS-CoV-2 receptor-binding domain (RBD) capturing proteins, LCB1 and LCB3. By tuning the reaction conditions, we achieved the spontaneous self-assembly of the Sup35-LCB1 fusion protein into a highly homogeneous and well-dispersed amyloid-like fibrillar material. These nanofibrils exhibited high affinity for the SARS-CoV-2 RBD, effectively inhibiting its interaction with the angiotensin-converting enzyme 2 (ACE2) receptor, the primary entry point for the virus into host cells. We further demonstrate that this functional nanomaterial entraps and neutralizes SARS-CoV-2 virus-like particles (VLPs), with a potency comparable to that of therapeutic antibodies. As a proof of concept, we successfully fabricated patterned surfaces that selectively capture SARS-CoV-2 RBD protein on wet environments. Collectively, these findings suggest that these protein-only nanofibrils hold promise as disinfecting coatings endowed with selective SARS-CoV-2 neutralizing properties to combat viral spread or in the development of sensitive viral sampling and diagnostic tools.
PubMed: 38955007
DOI: 10.1016/j.jcis.2024.06.175 -
Colloids and Surfaces. B, Biointerfaces Jun 2024The extensive use of polymers in the medical field has facilitated the development of various devices and implants, contributing to the restoration of organ function....
The extensive use of polymers in the medical field has facilitated the development of various devices and implants, contributing to the restoration of organ function. However, despite their advantages such as biocompatibility and robustness, these materials often face challenges like bacterial contamination and subsequent inflammation, leading to implant-associated infections (IAI). Integrating implants effectively is crucial to prevent bacterial colonization and reduce inflammatory responses. To overcome these major issues, surface chemical modifications have been extensively explored. Indeed, click chemistry, and particularly, copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has emerged as a promising approach for surface functionalization without affecting material bulk properties. Curcumin, known for its diverse biological activities, suffers from low solubility and stability. To enhance its bioavailability, bioconjugation strategy has garnered attention in recent years. This study represents pioneering work in immobilizing curcumin derivative onto polyethylene terephthalate (PET) surfaces, aiming to combat bacterial adhesion, inflammation and coagulation. Before curcumin derivative bioconjugation, a fluorophore, dansyl derivative, was employed in order to monitor and determine the efficiency of the proposed methodology. Previous surface chemical modifications were required for the immobilization of both dansyl and curcumin derivatives. Ultraviolet-Visible (UV-Vis) demonstrated the amidation functionalization of PET surface. Other surface characterization techniques including X-ray Photoelectron Spectroscopy (XPS), Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR), Scanning Electron Microscopy (SEM) and contact angle, among others, confirmed also the conjugation of both dansyl and curcumin derivatives. On the other hand, different biological assays corroborated that curcumin derivative immobilized PET surfaces do not exhibit cytotoxicity effect. Additionally, corresponding inflammation test were performed, indicating that these polymeric surfaces do not produce inflammation and, when curcumin derivative is immobilized, they decrease the inflammation marker level (IL-6). Moreover, the bacterial growth of both Gram positive and Gram negative bacteria were measured, demonstrating that the immobilization of curcumin derivative on PET provided antibacterial properties to the material. Finally, hemolysis rate analysis and whole blood clotting assay demonstrated the antithrombogenic effect of PET-Cur surfaces as well as no hemolysis concern in the fabricated functional surfaces.
PubMed: 38954936
DOI: 10.1016/j.colsurfb.2024.114048 -
Biomaterials Advances Jun 2024Sample partitioning is a crucial step towards digitization of biological assays on polymer microfluidic platforms. However, effective liquid filling into microwells and...
Improving assay feasibility and biocompatibility of 3D cyclic olefin copolymer microwells by superhydrophilic modification via ultrasonic spray deposition of polyvinyl alcohol.
Sample partitioning is a crucial step towards digitization of biological assays on polymer microfluidic platforms. However, effective liquid filling into microwells and long-term hydrophilicity remain a challenge in polymeric microfluidic devices, impeding the applicability in diagnostic and cell culture studies. To overcome this, a method to produce permanent superhydrophilic 3-dimensional microwells using cyclic olefin copolymer (COC) microfluidic chips is presented. The COC substrate is oxidized using UV treatment followed by ultrasonic spray coating of polyvinyl alcohol solution, offering uniform and long-term coating of high-aspect ratio microfeatures. The coated COC surfaces are UV-cured before bonding with a hydrophobic pressure-sensitive adhesive to drive selective filling into the wells. The surface hydrophilicity achieved using this method remains unchanged (water contact angle of 9°) for up to 6 months and the modified surface is characterized for physical (contact angle & surface energy, morphology, integrity of microfeatures and roughness), chemical composition (FTIR, Raman spectroscopy) and coating stability (pH, temperature, time). To establish the feasibility of the modified surface in biological applications, PVA-coated COC microfluidic chips are tested for DNA sensing (digital LAMP detection of CMV), and biocompatibility through protein adsorption and cell culture studies (cell adhesion, viability, and metabolic activity). Kidney and breast cells remained viable for the duration of testing (7 days) on this modified surface, and the coating did not affect the protein content, morphology or quality of the cultured cells. The ultrasonic spray coated system, coating with 0.25 % PVA for 15 cycles with 0.12 A current after UV oxidation, increased the surface energy of the COC (naturally hydrophobic) from 22.04 to 112.89 mJ/m and improved the filling efficiency from 40 % (native untreated COC) to 94 % in the microwells without interfering with the biocompatibility of the surface, proving to be an efficient, high-throughput and scalable method of microfluidic surface treatment for diagnostic and cell growth applications.
PubMed: 38954877
DOI: 10.1016/j.bioadv.2024.213934 -
Journal of Hazardous Materials Jun 2024Extracellular polymeric substances (EPS) secreted by organisms tend to encapsulate microplastics (MPs), forming an EPS-corona that affects the fate of MPs in marine...
Extracellular polymeric substances (EPS) secreted by organisms tend to encapsulate microplastics (MPs), forming an EPS-corona that affects the fate of MPs in marine ecosystems. However, the impact of the EPS-corona on the biotoxicity of MPs to marine organisms remains poorly understood. Herein, the effect of the EPS-corona on the toxicity of polystyrene (PS) MPs of different sizes (0.1 and 1 µm) to Skeletonema costatum (S. costatum) was investigated. The preferential adsorption of medium molecule weight (∼55 kDa) proteins onto PS MPs mainly contributed to the EPS-corona formation, decreasing the surface charge negativity of small-sized PS MPs (0.1 µm) by 72.4 %. Nitrogen (N) and oxygen (O) moieties in polysaccharides and proteins were identified as the preferential adsorption sites in the EPS-PS MPs interaction. Density functional theory (DFT) calculations confirmed the nuclear magnetic resonance spectroscopy (NMR) results, revealing that the binding mode between EPS and PS MPs was mainly hydrogen bonding. In addition, EPS-corona increased the cell density of S. costatum by 35.5-36.0 % when exposed to small-sized PS MPs (0.1 µm, 25-50 mg/L). These findings provide new insights into how EPS-corona affects the environmental fate and ecological risks associated with micro- and nano-sized plastics in marine ecosystems.
PubMed: 38954856
DOI: 10.1016/j.jhazmat.2024.135034 -
Carbohydrate Research Jun 2024Alternansucrase, a glucosyltransferase, is currently used to produce slowly digestible alternan oligosaccharides or maltooligosaccharides from sucrose. These...
Alternansucrase, a glucosyltransferase, is currently used to produce slowly digestible alternan oligosaccharides or maltooligosaccharides from sucrose. These oligosaccharides are popular for food fortification to lower postprandial glucose levels. This study aimed to explore the enzymatic reaction of alternansucrase in simulated in vitro gastric reaction conditions. Under the studied conditions, SucroSEB (a model enzyme for alternansucrase) hydrolyzed the sucrose and transglycosylated the glucose to produce glucans, both in the absence and presence of acceptors. The preference of the acceptor was maltose˃ raffinose˃ lactose. The rate of sucrose hydrolysis was significantly higher in the presence of maltose (p = 0.024). The glucans formed during the reaction included oligomers (DP 3-10) and polymers (DP ≥ 11), both of which increased over time. These glucans contained α-1,3 and α-1,6 glycosidic linkages, confirmed by H and C NMR. They were slowly and partially digestible in the presence of rat intestinal extract in contrast to the complete and rapid digestion of starch. The glucans formed after a longer gastric reaction time exhibited higher dietary fiber potential (19.145 ± 4.77 %; 60 min) compared to those formed during the initial phase (2.765 ± 0.19 %; 15 min). Overall, this study demonstrated the efficacy of SucroSEB in converting sucrose to slowly and partially digestible glucans under simulated in vitro gastric conditions.
PubMed: 38954850
DOI: 10.1016/j.carres.2024.109202 -
Inorganic Chemistry Jul 2024Reactions in water between a lanthanide ion and 3,4,5,6-tetrachloro-phthalate lead to a new series of iso-structural coordination polymers with general chemical formula...
Reactions in water between a lanthanide ion and 3,4,5,6-tetrachloro-phthalate lead to a new series of iso-structural coordination polymers with general chemical formula [Ln(tcpa)(HO)] with Ln = Eu-Yb plus Y. The crystal structure has been solved on the Y-derivative. This compound crystallizes in the monoclinic system, space group 2/ (no. 14) with the following cell parameters: = 6.2155(2) Å, = 19.6652(7) Å, = 30.3720(9) Å, β = 94.631(1)°, = 3700.22(37) Å, and = 4. Luminescence properties of homo- and heterolanthanide coordination polymers that belong to this structural family have been studied in detail. This study shows that, in this system, intermetallic energy transfers are very efficient and that dilution by an optically non active Gd ion leads to quite efficient luminescent heterolanthanide coordination polymers. The luminescence of these compounds, dispersed at a low doping rate in a poly(methyl methacrylate) (PMMA) matrix, can be observed even with the naked eye. This study opens the way to the use of such compounds as taggants for optical sorting of plastic waste and consecutive recycling.
PubMed: 38954824
DOI: 10.1021/acs.inorgchem.4c01866 -
Hepatology (Baltimore, Md.) Jul 2024Alpha-1 antitrypsin deficiency (A1ATD) is a life-threatening condition caused by inheritance of the SERPINA1 'Z' genetic variant (PiZ) driving AAT protein misfolding in...
Alpha-1 antitrypsin deficiency (A1ATD) is a life-threatening condition caused by inheritance of the SERPINA1 'Z' genetic variant (PiZ) driving AAT protein misfolding in hepatocytes. There remain no approved medicines for this disease. Here, we report the results of a small molecule screen performed in patient derived iPSC-hepatocytes that identified Leucine-rich repeat kinase-2 (LRRK2) as a potentially new therapeutic target. Of the commercially available LRRK2 inhibitors tested, we identified CZC-25146, a candidate with favorable pharmacokinetic properties, as being capable of reducing polymer load, increasing normal AAT secretion, and reducing inflammatory cytokines in both cells and PiZ mice. Mechanistically, this effect was achieved through induction of autophagy. Our findings support the use of CZC-25146 and LRRK2 inhibitors in hepatic proteinopathy research and their further investigation as novel therapeutic candidates for A1ATD.
PubMed: 38954820
DOI: 10.1097/HEP.0000000000000969