-
Talanta Jun 2024A modified development protocol and concomitant characterisation of a first generation biosensor for the detection of brain extracellular d-serine is reported....
A modified development protocol and concomitant characterisation of a first generation biosensor for the detection of brain extracellular d-serine is reported. Functional parameters important for neurochemical monitoring, including sensor sensitivity, O interference, selectivity, shelf-life and biocompatibility were examined. Construction and development involved the enzyme d-amino acid oxidase (DAAO), utilising a dip-coating immobilisation method employing a new extended drying approach. The resultant Pt-based polymer enzyme composite sensor achieved high sensitivity to d-serine (0.76 ± 0.04 nA mm. μM) and a low μM limit of detection (0.33 ± 0.02 μM). The in-vitro response time was within the solution stirring time, suggesting potential sub-second in-vivo response characteristics. Oxygen interference studies demonstrated a 1 % reduction in current at 50 μM O when compared to atmospheric O levels (200 μM), indicating that the sensor can be used for reliable neurochemical monitoring of d-serine, free from changes in current associated with physiological O fluctuations. Potential interference signals generated by the principal electroactive analytes present in the brain were minimised by using a permselective layer of poly(o-phenylenediamine), and although several d-amino acids are possible substrates for DAAO, their physiologically relevant signals were small relative to that for d-serine. Additionally, changing both temperature and pH over possible in vivo ranges (34-40 °C and 7.2-7.6 respectively) resulted in no significant effect on performance. Finally, the biosensor was implanted in the striatum of freely moving rats and used to monitor physiological changes in d-serine over a two-week period.
PubMed: 38955102
DOI: 10.1016/j.talanta.2024.126458 -
Virology Jun 2024Plant viruses threaten global food security by infecting commercial crops, highlighting the critical need for efficient virus detection to enable timely preventive... (Review)
Review
Plant viruses threaten global food security by infecting commercial crops, highlighting the critical need for efficient virus detection to enable timely preventive measures. Current techniques rely on polymerase chain reaction (PCR) for viral genome amplification and require laboratory conditions. This review explores the applications of CRISPR-Cas assisted diagnostic tools, specifically CRISPR-Cas12a and CRISPR-Cas13a/d systems for plant virus detection and analysis. The CRISPR-Cas12a system can detect viral DNA/RNA amplicons and can be coupled with PCR or isothermal amplification, allowing multiplexed detection in plants with mixed infections. Recent studies have eliminated the need for expensive RNA purification, streamlining the process by providing a visible readout through lateral flow strips. The CRISPR-Cas13a/d system can directly detect viral RNA with minimal preamplification, offering a proportional readout to the viral load. These approaches enable rapid viral diagnostics within 30 min of leaf harvest, making them valuable for onsite field applications. Timely identification of diseases associated with pathogens is crucial for effective treatment; yet developing rapid, specific, sensitive, and cost-effective diagnostic technologies remains challenging. The current gold standard, PCR technology, has drawbacks such as lengthy operational cycles, high costs, and demanding requirements. Here we update the technical advancements of CRISPR-Cas in viral detection, providing insights into future developments, versatile applications, and potential clinical translation. There is a need for approaches enabling field plant viral nucleic acid detection with high sensitivity, specificity, affordability, and portability. Despite challenges, CRISPR-Cas-mediated pathogen diagnostic solutions hold robust capabilities, paving the way for ideal diagnostic tools. Alternative applications in virus research are also explored, acknowledging the technology's limitations and challenges.
PubMed: 38955083
DOI: 10.1016/j.virol.2024.110160 -
Spectrochimica Acta. Part A, Molecular... Jun 2024Pure and chromium (Cr) doped L-asparagine monohydrate (LAM) single crystals were grown by using evaporation controlled solution growth technique. XRD analysis confirmed...
Pure and chromium (Cr) doped L-asparagine monohydrate (LAM) single crystals were grown by using evaporation controlled solution growth technique. XRD analysis confirmed the orthorhombic crystal system with space group P222 of grown crystals. Cr-incorporation decreased the cell parameters and unit cell volume of the crystals. Intermolecular interactions were analysed through Hirshfeld and fingerprint studies. SEM analysis showed the appearance of pits on the smooth surface of pure crystal due to Cr-addition. UV-Vis analysis showed high transparency, low cut-off and direct band gap of 5.42 eV and 5.51 eV for pure and Cr doped crystals, respectively. Fundamental functional groups were identified by FTIR and Raman spectroscopy. The thermal stability and melting point of the crystals were investigated using TGA/DSC analysis. The dielectric constant for doped LAM was increased to 44 as compare to dielectric constant of pure crystal which was 32. Both crystals showed low dielectric loss, having values 0.04 and 0.006 for pure LAM and doped crystals, respectively. In Vickers microhardness test, Cr doping was found to change the nature of pure LAM crystal from 'soft' to 'hard' as Meyer's index changed from 2.48 to 1.24.
PubMed: 38955075
DOI: 10.1016/j.saa.2024.124722 -
Spectrochimica Acta. Part A, Molecular... Jun 2024Fluorescent probes with preferred photophysical properties have attracted considerable attention for their advantages in real-time and accurate detection of signalling...
Fluorescent probes with preferred photophysical properties have attracted considerable attention for their advantages in real-time and accurate detection of signalling molecules in living organisms. Nitric oxide (NO) is a ubiquitous cellular messenger closely associated with many physiological and pathological processes. A NO fluorescent probe, PYSNO, based on the pyridazinone (PY) scaffold with o-phenylenediamine as the receptor and thiophene (S) as the linker has been synthesized. Inspired by the experimental guidance, three other dyes (PYSSNO, PYSONO and PYONO) were theoretically designed by replacing the S linker with thieno[3,2-b]thiophene (SS), thieno[3,2-b]thiophene 1,1-dioxide (SO) and thiophene 1,1-dioxide (O) groups. The photophysical properties were theoretically investigated in aqueous solution, by the combined time-dependent density functional theory, polarizable continuum model and thermal vibration correlation function approaches. Our results indicate that the emission wavelengths of all the designed dyes show red shifts due to either an increase in the conjugation length or electron-accepting ability of the linkers compared to PYSNO. The photoinduced electron transfer (PET) processes are all absent in these systems. PYSSNO and PYSONO are theoretically expected to be promising candidates for novel NO fluorescent probes, but the suitability of PYONO as a NO probe is compromised by the predicted non-luminescent emission before and after reaction with NO. Our study not only offers valuable insights into the detailed structure-property relationships, but also opens a new avenue for the rational design of efficient fluorescent sensors for NO detection.
PubMed: 38955069
DOI: 10.1016/j.saa.2024.124761 -
Spectrochimica Acta. Part A, Molecular... Jun 2024Acetaminophen, also known as paracetamol (APAP), is a commonly used over-the-counter medication that is often used to treat headaches, toothaches, joint pain, muscle...
Acetaminophen, also known as paracetamol (APAP), is a commonly used over-the-counter medication that is often used to treat headaches, toothaches, joint pain, muscle pain, and to lower body temperature. However, overdose can lead to liver damage, gastrointestinal distress, kidney damage, and cardiovascular disease. Therefore, it is very important to establish a method to quickly detect APAP. A novel "ON-OFF-ON" colorimetric and fluorescence dual-signal sensing system was constructed for the quantitative detection of APAP based on 5,10,15,20-tetrakis(4-sulphonatophenyl) porphyrin (TSPP) dual-signal probe. The absorbance and fluorescence intensity of TSPP respectively were quenched when Fe was introduced into TSPP solution. At this point, the color of the corresponding solution changed from red to green. The absorbance and fluorescence intensity of TSPP respectively were restored when APAP was added to the TSPP-Fe system. At this time, the color of the solution changed from green to colorless. Therefore, an "ON-OFF-ON" dual-signal sensing study of APAP were constructed using TSPP as the colorimetric and fluorescent probe. The proposed colorimetric sensing system had a wide linear range in the 13.12 mM ∼ 23.20 mM with 0.11 mM of limit of detection (LOD, S/N = 3). And the proposed fluorescence sensing system had a wide linear range in the 3.45 mM ∼ 12.50 mM and 41.67 mM ∼ 65.22 mM with 0.83 mM of limit of detection (LOD, S/N = 3). The dual-signal sensing system were applied to the APAP detection of real samples.
PubMed: 38955068
DOI: 10.1016/j.saa.2024.124759 -
Spectrochimica Acta. Part A, Molecular... Jun 2024Fluorescent aggregates and ensembles have been widely applied in fabrication of fluorescent sensors due to their capacity of encapsulating fluorophores and modulating...
Fluorescent aggregates and ensembles have been widely applied in fabrication of fluorescent sensors due to their capacity of encapsulating fluorophores and modulating their photophysical properties. In the present work, fluorescent ensembles based on anionic surfactant SDS assemblies and perylene derivatives (PBIs) were particularly constructed. Three newly synthesized neutral PBI derivatives with different structures, PO, PC1 and PC2, were used for the purpose to evaluate probe structure influence on constructing fluorescent ensembles. The one with hydrophilic side chains, PO, experienced distinct photophysical modulation effect by SDS assemblies. The ensemble based on PO@SDS assemblies displayed effective fluorescence variation to antibiotic aminoglycosides (AGs). To improve cross-reactivity and discrimination capability of ensembles, a second probe, coumarin, was introduced into PO@SDS assemblies. The resultant ternary sensor, CM-PO@SDS, exhibited good qualitative and quantitative detection capabilities, and achieved differentiation of eight AGs and mixed AG samples both in aqueous solution and actual biological fluid, like human serum. Sensing mechanism studies revealed that hydrogen bonding, electrostatic and hydrophobic interactions are involved in the sensing process. This surfactant-based fluorescent ensemble provides a simple and feasible method for assessing AGs levels. Meanwhile, this work may provide some insights to design reasonable probes for constructing effective single-system based discriminative fluorescent amphiphilic sensors.
PubMed: 38955066
DOI: 10.1016/j.saa.2024.124735 -
Journal of Environmental Management Jul 2024Promoting the formation of the green lifestyle (GL) is a crucial step in achieving comprehensive green transformation of urban economic and social development. The...
Promoting the formation of the green lifestyle (GL) is a crucial step in achieving comprehensive green transformation of urban economic and social development. The widespread adoption of GL is influenced by various environmental regulations. Previous research mainly focused on the impact of individual policies on GL from the single policy perspective. The mechanisms of the combined effects of policies have not been thoroughly explored, particularly the contributions of each policy during periods of overlap. This paper takes the dual-policy of the New-type Urbanization Policy (NUP) and Smart City Policy (SCP) in China as an example. It employs panel data collected from 271 cities in China during 2007-2019 and establishes a multi-period difference-in-difference model to identify the combined effects of the dual-policy on residents' GL. Additionally, the Shapley value decomposition method is utilized to identify the contribution magnitude of each policy when they act simultaneously. The following conclusions are yielded. Firstly, the combined effects of dual-policy are more effective than a single policy in influencing residents' GL. Secondly, the Shapley value decomposition method reveals that when both policies are simultaneously implemented, SCP contributes a greater weight compared to NUP. Thirdly, the dual-policy can promote residents' adoption of GL through mechanisms such as green technological innovation, public participation in environmental protection, and the agglomeration of tertiary industries. Fourthly, the impact of dual-policy on residents' GL varies across different types and sizes of cities. This study attempts to unseal the "black box" of how the dual-policy influences residents' GL during the green transformation of cities in China, providing theoretical references for relevant urban policies in other countries and contributing to Chinese solutions and experience to global urban green development.
PubMed: 38955046
DOI: 10.1016/j.jenvman.2024.121469 -
Journal of Environmental Management Jul 2024The development of sustainable advanced energy conversion technologies and efficient pollutant treatment processes is a viable solution to the two global crises of the... (Review)
Review
The development of sustainable advanced energy conversion technologies and efficient pollutant treatment processes is a viable solution to the two global crises of the lack of non-renewable energy resources and environmental harm. In recent years, the interaction of biological and chemical oxidation units to utilize biomass has been extensively studied. Among these systems, bio-electro-Fenton (BEF) and photo-bio-electro-Fenton (PBEF) systems have shown prospects for application due to making rational and practical conversion and use of energy. This review compared and analyzed the electron transfer mechanisms in BEF and PBEF systems, and systematically summarized the techniques for enhancing system performance based on the generation, transfer, and utilization of electrons, including increasing the anode electron recovery efficiency, enhancing the generation of reactive oxygen species, and optimizing operational modes. This review compared the effects of different methods on the electron flow process and fully evaluated the benefits and drawbacks. This review may provide straightforward suggestions and methods to enhance the performance of BEF and PBEF systems and inspire the reader to explore the generation and utilization of sustainable energy more deeply.
PubMed: 38955044
DOI: 10.1016/j.jenvman.2024.121633 -
Journal of Environmental Management Jul 2024Chromium contamination from abandoned industrial sites and inadequately managed waste disposal areas poses substantial environmental threat. Microbially induced...
Chromium contamination from abandoned industrial sites and inadequately managed waste disposal areas poses substantial environmental threat. Microbially induced carbonate precipitation (MICP) has shown promising, eco-friendly solution to remediate Cr(VI) and divalent heavy metals. In this study, MICP was carried out for chromium immobilization by an ureolytic bacterium Arthrobacter creatinolyticus which is capable of reducing Cr(VI) to less toxic Cr(III) via extracellular polymeric substances (EPS) production. The efficacy of EPS driven reduction was confirmed by cellular fraction analysis. MICP carried out in aqueous solution with 100 ppm of Cr(VI) co-precipitated 82.21% of chromium with CaCO and the co-precipitation is positively correlated with reduction of Cr(VI). The organism was utilized to remediate chromium spiked sand and found that MICP treatment decreased the exchangeable fraction of chromium to 0.54 ± 0.11% and increased the carbonate bound fraction to 26.1 ± 1.15% compared to control. XRD and SEM analysis revealed that Cr(III) produced during reduction, influenced the polymorph selection of vaterite during precipitation. Evaluation of MICP to remediate Cr polluted soil sample collected from Ranipet, Tamil Nadu also showed effective immobilization of chromium. Thus, A. creatinolyticus proves to be viable option for encapsulating chromium contaminated soil via MICP process, and effectively mitigating the infiltration of Cr(VI) into groundwater and adjacent water bodies.
PubMed: 38955041
DOI: 10.1016/j.jenvman.2024.121300 -
Journal of Colloid and Interface Science Jun 2024Lithium-sulfur batteries (LSBs) hold promise as the next-generation lithium-ion batteries (LIBs) due to their ultra-high theoretical capacity and remarkable...
A multifunctional solution to enhance capacity and stability in lithium-sulfur batteries: Incorporating hollow CeO nanorods into carbonized non-woven fabric as an interlayer.
Lithium-sulfur batteries (LSBs) hold promise as the next-generation lithium-ion batteries (LIBs) due to their ultra-high theoretical capacity and remarkable cost-efficiency. However, these batteries suffer from the serious shuttle effect, challenging their practical application. To address this challenge, we have developed a unique interlayer (HCON@CNWF) composed of hollow cerium oxide nanorods (CeO) anchored to carbonized non-woven viscose fabric (CNWF), utilizing a straightforward template method. The prepared interlayer features a three-dimensional (3D) conductive network that serves as a protective barrier and enhances electron/ion transport. Additionally, the CeO component effectively chemisorbs and catalytically transforms lithium polysulfides (LiPSs), offering robust chemisorption and activation sites. Moreover, the unique porous structure of the HCON@CNWF not only physically adsorbs LiPSs but also provides ample space for sulfur's volume expansion, thus mitigating the shuttle effect and safeguarding the electrode against damage. These advantages collectively contribute to the battery's outstanding electrochemical performance, notably in retaining a reversible capacity of 80.82 % (792 ± 5.60 mAh g) of the initial value after 200 charge/discharge cycles at 0.5C. In addition, the battery with HCON@CNWF interlayer has excellent electrochemical performance at high sulfur loading (4 mg cm) and low liquid/sulfur ratio (7.5 µL mg). This study, thus, offers a novel approach to designing advanced interlayers that can enhance the performance of LSBs.
PubMed: 38955018
DOI: 10.1016/j.jcis.2024.06.228