-
Radiology Case Reports Aug 2024For maxillary gingival carcinomas, especially those in the molar region, surgical resection is often performed beyond the maxillary tuberosity. Bleeding from the...
For maxillary gingival carcinomas, especially those in the molar region, surgical resection is often performed beyond the maxillary tuberosity. Bleeding from the posterior superior alveolar or maxillary artery into the pterygoid process is difficult to stop during partial maxillary resection. Advances in catheterization and materials have enabled the embolization of various vessels. In this report, we describe two cases of maxillary gingival cancer in which preoperative endovascular arterial embolization prevented bleeding due to unexpected vascular injury, allowing for a safe surgery with minimal blood loss. This technique effectively avoids emergency hemostasis for unexpected bleeding when resecting gingival cancers in the maxillary molar region.
PubMed: 38933655
DOI: 10.1016/j.radcr.2024.05.052 -
Frontiers in Oral Health 2024Silver(I)-diammine fluoride (SDF) and silver(I)-fluoride (SF) complexes have been successfully employed for the arrest of dental caries for many years. However, to date...
Explorations of the chemical constitution and aqueous solution status of caries-arresting silver(I)-diammine fluoride and silver(I)-fluoride products using high-resolution F NMR analysis. Spectroscopic and SEM investigations of their interactions with human saliva: evidence for the...
INTRODUCTION
Silver(I)-diammine fluoride (SDF) and silver(I)-fluoride (SF) complexes have been successfully employed for the arrest of dental caries for many years. However, to date there are very few studies available reporting on the molecular structural compositional and solution status of these agents [typically applied as highly-concentrated 38% (w/v) solutions]. Here, we explored the solution status and chemical constitution of commercially-available SDF and SF products, and secondly investigated the multicomponent interplay of these products with biomolecules present in intact human whole-mouth salivary supernatants (WMSSs) .
METHODS
High-resolution F NMR analysis was employed to explore SDF and SF product solutions, and to determine WMSS fluoride (F) concentrations, whereas ammonia (NH) release form SDF was tracked by H NMR spectroscopy. SEM and thin-film FTIR-ATR analyses were employed to explore the atomic and molecular compositions of sequentially-generated AgCl deposits and chromophoric Ag/AgCl nanoparticles (CSNPs); the time-dependent generation of the latter was followed spectrophotometrically.
RESULTS
F NMR spectra of aqueous SF solutions contained a very broad F signal (Δv 70 Hz), demonstrating that much of its solvated F content was rapidly exchanging with Ag(I) on the NMR timescale, but those of SDF had a much sharper resonance, similar to that of "free" F (4 Hz). Moreover, further NMR results revealed that a popular SDF product contained high molar excesses of both F and NH. Treatment of WMSSs with SDF and SF generated an off-white precipitate, which slowly developed into CSNPs at 23°C; SEM demonstrated high contents of both silver and chloride in this material (ca.1:1 atomic content ratio). FTIR-ATR analysis found that the CSNPs formed contained a range of salivary biomolecules, which appear to encapsulate the Ag/AgCl core (significant thiocyanate contents were also found). In conclusion, NMR results acquired demonstrated that SF, but not SDF, product solutions feature rapidly-exchanging F between its "free" and Ag(I)-bound forms, and that SDF contains large excesses of both F and its NH ligands. Characterised AgCl deposits and CSNPs were sequentially produced from the interactions of these complexes with WMSS biomolecules.
DISCUSSION
In view of their well-known microbicidal and cariostatic properties, the observed autobioconstruction of CSNPs involving salivary catalysis is of much therapeutic significance.
PubMed: 38933119
DOI: 10.3389/froh.2024.1373885 -
Polymers Jun 2024The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication.... (Review)
Review
The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes.
PubMed: 38932068
DOI: 10.3390/polym16121717 -
Polymers Jun 2024The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in...
The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in comparison to each other and to subtractively manufactured devices. A total of 192 occlusal devices were manufactured by one SLA-printing and two DLP-printing methods in 5 different build angles as well as milling. The specimens were scanned and superimposed to their initial CAD data and each other to obtain trueness and precision data values. A second series of scans were performed after the specimens underwent an artificial aging simulation by thermocycling. Again, trueness and precision were investigated, and pre- and post-aging values were compared. A statistically significant influence was found for all main effects: manufacturing method, build angle, and thermocycling, confirmed by two-way ANOVA. Regarding trueness, overall tendency indicated that subtractively manufactured splints were more accurate than the 3D-printed, with mean deviation values around ±0.15 mm, followed by the DLP1 group, with ±0.25 mm at 0 degree build angle. Within the additive manufacturing methods, DLP splints had significantly higher trueness for all build angles compared to SLA, which had the highest mean deviation values, with ±0.32 mm being the truest to the original CAD file. Regarding precision, subtractive manufacturing showed better accuracy than additive manufacturing. The artificial aging demonstrated a significant influence on the dimensional accuracy of only SLA-printed splints.
PubMed: 38932064
DOI: 10.3390/polym16121714 -
Polymers Jun 2024This study aimed to evaluate the flexural strength (FS), surface wear, and optical properties of 3D-printed dental resins subjected to different post-printing...
This study aimed to evaluate the flexural strength (FS), surface wear, and optical properties of 3D-printed dental resins subjected to different post-printing conditions. A total of 240 specimens (2 × 2 × 25 mm³) were 3D-printed using resin materials for permanent (VaresoSmile Crown Plus) VSC and temporary (VaresoSmile Temp) VST restorations. Specimens underwent five post-printing conditions: no post-printing cure; post-cured in a Form Cure curing unit; Visio Beta Vacuum; Ivoclar Targis; or heat-cured (150 °C) for 30 min. Each group of specimens ( = 24) was tested either directly after post-curing, after 24 h of dry storage, or following hydrothermal accelerated aging in boiling water for 16 h. The three-point bending test was used to evaluate the FS. The two-body wear test was performed on 50 disc-shaped specimens ( = 5/group). Surface gloss and translucency were measured for permanent VSC specimens ( = 5/group). SEM/EDS and statistical analyses were performed. The Form Cure device yielded the highest FS and lowest wear depth ( < 0.05). Hydrothermal aging significantly reduced FS. There were no statistical differences in FS and wear values between materials subjected to same post-printing conditions. VSC groups exhibited similar optical properties across different post-printing treatments. Post-printing treatment conditions had a significant impact on the FS and wear of the 3D-printed resin, while optical properties remained unaffected.
PubMed: 38932063
DOI: 10.3390/polym16121713 -
Polymers Jun 2024Bovine serum albumin (BSA) hydrogels are non-immunogenic, low-cost, biocompatible, and biodegradable. In order to avoid toxic cross-linking agents, gellan was oxidized...
Bovine serum albumin (BSA) hydrogels are non-immunogenic, low-cost, biocompatible, and biodegradable. In order to avoid toxic cross-linking agents, gellan was oxidized with NaIO to obtain new functional groups like dialdehydes for protein-based hydrogel cross-linking. The formed dialdehyde groups were highlighted with FT-IR and NMR spectroscopy. This paper aims to investigate hydrogel films for biomedical applications obtained by cross-linking BSA with oxidized gellan (OxG) containing immobilized β-cyclodextrin-curcumin inclusion complex (β-CD-Curc) The β-CD-Curc improved the bioavailability and solubility of Curc and was prepared at a molar ratio of 2:1. The film's structure and morphology were evaluated using FT-IR spectroscopy and SEM. The swelling degree (Q%) values of hydrogel films depend on hydrophilicity and pH, with higher values at pH = 7.4. Additionally, the conversion index of -NH groups into Schiff bases increases with an increase in OxG amount. The polymeric matrix provides protection for Curc, is non-cytotoxic, and enhances antioxidant activity. At pH = 5.5, the skin permeability and release efficiency of encapsulated curcumin were higher than at pH = 7.4 because of the interaction of free aldehyde and carboxylic groups from hydrogels with amine groups from proteins present in the skin membrane, resulting in a better film adhesion and more efficient curcumin release.
PubMed: 38931981
DOI: 10.3390/polym16121631 -
Pharmaceutics Jun 2024Despite the high success rates of dental implants, peri-implantitis is currently the most common complication in dental implantology. Peri-implantitis has an... (Review)
Review
Despite the high success rates of dental implants, peri-implantitis is currently the most common complication in dental implantology. Peri-implantitis has an inflammatory nature, it is associated with the accumulation of plaque in the peri-implant tissues, and its evolution can be progressive depending on various factors, comorbidities, and poor oral health. Prophylaxis and different treatment methods have been widely discussed in recent decades, and surgical and non-surgical techniques present both advantages and disadvantages. In this work, a literature review of different studies on the application of adjuvant treatments, such as local and systemic antibiotics and antiseptic treatments, was conducted. Positive outcomes have been found in the short (up to one year after treatment) and long term (up to ten years after treatment) with combined therapies. However, there is still a need to explore new therapies based on the use of advanced drug delivery systems for the effective treatment of peri-implantitis in the long term and without relapses. Hence, micro- and nanoparticles, implants, and injectable hydrogels, among others, should be considered in future peri-implantitis treatment with the aim of enhancing overall therapy outcomes.
PubMed: 38931890
DOI: 10.3390/pharmaceutics16060769 -
Pharmaceuticals (Basel, Switzerland) Jun 2024Periodontitis preceded by gingivitis is the most common form of periodontal disease and occurs due to the interaction of microorganisms present in the complex bacterial...
BACKGROUND
Periodontitis preceded by gingivitis is the most common form of periodontal disease and occurs due to the interaction of microorganisms present in the complex bacterial aggregates of dental plaque biofilm and their metabolism products with periodontal tissues. Histamine is a heterocyclic biogenic amine acting via four types of receptors. Histamine H receptors act as presynaptic auto/heteroreceptors to regulate the release of histamine and other neurotransmitters.
AIM
Since the nervous system is able to regulate the progression of the inflammatory process and bone metabolism, the aim of this study was to investigate the effects of DL76, which acts as an antagonist/inverse agonist of H receptors, on the course of experimental periodontitis.
MATERIALS AND METHODS
This study was conducted in 24 mature male Wistar rats weighing 245-360 g, aged 6-8 weeks. A silk ligature was placed on the second maxillary molar of the right maxilla under general anesthesia. From the day of ligating, DL76 and 0.9% NaCl solutions were administered subcutaneously for 28 days in the experimental and control groups, respectively. After the experiment, histopathological, immunohistochemical and radiological examinations were performed.
RESULTS
Ligation led to the development of the inflammatory process with lymphocytic infiltration, increased epithelial RANKL and OPG expression as well as bone resorption. DL76 evoked a reduction in (1) lymphocytic infiltration, (2) RANKL and OPG expression as well as (3) bone resorption since the medians of the mesial and distal interdental spaces in the molars with induced periodontitis were 3.56-fold and 10-fold lower compared to the corresponding values in saline-treated animals with periodontitis.
CONCLUSION
DL76 is able to inhibit the progression of experimental periodontitis in rats, as demonstrated by a reduction in the inflammatory cell infiltration, a decrease in the RANKL/RANK OPG pathway expression and a reduction in the alveolar bone resorption.
PubMed: 38931459
DOI: 10.3390/ph17060792 -
Pharmaceuticals (Basel, Switzerland) Jun 2024The treatment adherence of narcotics-addicted individuals with reduced incidences of relapse can be enhanced by a sustained drug release formulation of antinarcotics. So...
The treatment adherence of narcotics-addicted individuals with reduced incidences of relapse can be enhanced by a sustained drug release formulation of antinarcotics. So far, different drug formulations have been reported with sustained drug release periods of 28 and 35 days. To further enhance this duration, different formulations of injectable hydrogels (IHs) have been developed by combining low molecular weight (LMW) and high molecular weight (HMW) chitosan (CS) with guar gum (GG) and crosslinking them by sodium bi phosphate dibasic. The structural, morphological, and physicochemical properties of LMW-CS IH, and HMW-CS IH were evaluated using Fourier transform infrared spectroscopy (FT-IR), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), and rheological, swelling, and biodegradation analysis. The HMW-CS IH showed high crosslinking, increased thermal stability, high mechanical strength, elevated swelling, and low biodegradation. The antinarcotic drugs naltrexone (NTX) and disulfiram (DSF) were loaded separately into the HMW-CS IH and LMW-CS IH. The release of NTX and DSF was investigated in phosphate buffer saline (PBS) and ethanol (0.3%, 0.4%, and 0.5%) over a 56-day period using an UV spectrophotometer. The drug release data were tested in zero-order, first-order, and Korsemeyer-Peppas mathematical models. In PBS, all prepared formulations followed non-Fickian drug release, while in ethanol, only NTX HMW-CS IH followed non-Fickian release in all three different concentrations of ethanol.
PubMed: 38931416
DOI: 10.3390/ph17060749 -
Nutrients Jun 2024The use of natural products as alternatives to traditional pharmacological treatments in orthodontics is gaining interest due to their anti-inflammatory, antibacterial,... (Review)
Review
The use of natural products as alternatives to traditional pharmacological treatments in orthodontics is gaining interest due to their anti-inflammatory, antibacterial, and antioxidant properties. This systematic review synthesizes evidence from clinical trials to evaluate the efficacy of natural products in reducing inflammation and bacterial presence in orthodontic and orthognathic treatment settings. The database search was conducted across PubMed, Scopus, and Embase up to January 2024. The review focused on randomized controlled trials only. The selected studies centered on the anti-inflammatory, antibacterial, and antioxidant effects of natural products, adhering to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines for data extraction. Nine studies, totaling 358 participants, were included. Significant findings demonstrated a reduction in gingival inflammation by over 40% with the use of Aloe vera compared to chlorhexidine. Another study noted a decrease in bleeding on probing by 13.6 points in the treatment group over placebo. Additionally, honey showed a rapid modulation of plaque pH and significantly reduced bacterial counts of . Furthermore, the use of resveratrol emulgel was linked to substantial improvements in gingival health, with a reduction in the gingival index and probing pocket depth. The results indicate that natural products can significantly enhance orthodontic treatment outcomes by reducing inflammation and bacterial levels. These products offer effective alternatives to traditional treatments and show potential for integration into routine orthodontic care protocols. Further research is encouraged to standardize application methods and dosages to maximize clinical benefits and patient satisfaction.
Topics: Humans; Aloe; Anti-Bacterial Agents; Anti-Inflammatory Agents; Antioxidants; Biological Products; Chlorhexidine; Dentofacial Deformities; Gingivitis; Honey; Orthodontics; Plant Preparations; Randomized Controlled Trials as Topic; Resveratrol; Streptococcus mutans; Treatment Outcome
PubMed: 38931295
DOI: 10.3390/nu16121941