-
Frontiers in Dentistry 2024The reduction of resistance to sliding between the archwire and bracket promotes more seamless tooth movement, leading to a faster and improved orthodontic treatment...
The reduction of resistance to sliding between the archwire and bracket promotes more seamless tooth movement, leading to a faster and improved orthodontic treatment experience. This research aimed to examine how the degradation of elastomeric modules, different ligation methods, bracket-wire angle, and wire type (nickel titanium, NiTi or stainless-steel, SS) impact the kinetic friction resulting from the interaction between NiTi or SS archwires and SS brackets. The current in vitro study was conducted on nine groups, including NiTi and SS archwires with three types of ligations (O-ring, figure of 8, and SS wire ligature) and two bracket-wire angles (0˚ and 10˚). The kinetic friction in each group was measured using a Universal Testing Machine at four time intervals: baseline, day one, week one, and week four. Repeated measures ANOVA, Mauchly test of sphericity followed by the Greenhouse-Geisser test, and relevant post hoc tests were used for statistical analysis (P<0.05). The authors found a decrease in kinetic friction in all types of ligations, which confirmed the effect of time on the degradation of ligation modules. The kinetic friction of figure of 8 ligations was higher than both O-ring and SS wire ligations. No difference was observed between O-ring and SS wire ligations. Furthermore, the bracket-wire angle did not affect friction. The authors suggest that the use of figure of 8 ligations in NiTi and SS wires should be limited due to their high friction and replaced with other types of ligations, if possible.
PubMed: 38742224
DOI: 10.18502/fid.v21i10.15222 -
BMC Oral Health May 2024This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and...
OBJECTIVE
This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and by comparing it with the half-wrapped tray (HWT).
MATERIALS AND METHODS
An intraoral scanner was used to acquire data on the maxillary dental arch of a patient with periodontitis.Furthermore, 20 maxillary dental arch models were 3D printed. Using 3Shape, PlastyCAD software, and 3D printing technology, 10 FTMC (method I) and HWT (method II) were obtained. By preoperative preparation, intraoperative coordination, and postoperative measurement, the brackets were transferred from the trays to the 3D-printed maxillary dental arch models. Additionally, the bracket's excess adhesive as well as linear and angular deviations were measured, and the differences between the two methods were analyzed.
RESULTS
Excess adhesive was observed in both methods, with FTMC showing less adhesive (P< 0.001), with a statistical difference. Furthermore, HWT's vertical, tip and torque, which was significantly greater than FTMC (P< 0.05), with no statistical difference among other respects. The study data of incisors, canines, and premolars, showed that the premolars had more adhesive residue and were more likely to have linear and angular deviations.
CONCLUSIONS
The FTMC had higher bracket bonding effect in comparison to HWT, and the adhesive residue, linear and angular deviations are smaller. The fence tray offers an intuitive view of the precise bonding of the bracket, and can remove excess adhesive to prevent white spot lesions via care, providing a different bonding method for clinical applications.
Topics: Orthodontic Brackets; Humans; Dental Bonding; In Vitro Techniques; Models, Dental; Adhesives; Printing, Three-Dimensional; Dental Cements; Dental Arch
PubMed: 38735948
DOI: 10.1186/s12903-024-04348-w -
Clinical Oral Investigations May 2024This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA)... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
AIMS
This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA) compared to fluoride varnish.
METHODS
Patients aged 12-17 years with at least one WSL with an International Caries Detection and Assessment System (ICDAS) score of 1-2 during an active MBA treatment were included and randomized to receive either resin infiltration (Icon) or fluoride application (Flairesse). Standardized digital images were obtained before, one-day, one-week, one-month, three-months and six-months after treatment using a DSLR camera and a matching polarization filter. A grey reference card was used for color standardization. A Matlab routine was used to measure the color difference between adjacent healthy enamel and treated WSL. The independent-samples t-test was used for intergroup and paired-samples t-test for intragroup comparison.
RESULTS
Images of 116 teeth from 36 patients were analyzed. The ΔE for the "Icon" treated WSL was smaller (T1 = 5.0 ± 1.4) than in the fluoride group (T1 = 8.4 ± 3.2). Caries infiltration significantly improved the aesthetic appearance of WSL (p < 0.001), which remained satisfactory at six months (T5 = 5.2 ± 1.6).
CONCLUSION
WSL infiltration management during orthodontic treatment was superior to topical fluoridation in not only arresting the enamel lesions but also significantly improving the aesthetic appearance of demineralized regions around the brackets.
CLINICAL RELEVANCE
WSL treatment in orthodontic patients is usually initiated after debonding. Research has shown that the earlier WSL is treated, the better the aesthetic outcome. There is limited data on the efficacy of resin infiltration of WSL during orthodontic treatment.
Topics: Adolescent; Child; Female; Humans; Male; Cariostatic Agents; Dental Caries; Fluorides, Topical; Orthodontic Brackets; Resins, Synthetic; Treatment Outcome
PubMed: 38733458
DOI: 10.1007/s00784-024-05695-2 -
Polymers May 2024Polyetheretherketone (PEEK), an organic thermoplastic polymer, has gained interest in dentistry due to its excellent mechanical strength, flexibility, and... (Review)
Review
Polyetheretherketone (PEEK), an organic thermoplastic polymer, has gained interest in dentistry due to its excellent mechanical strength, flexibility, and biocompatibility. Furthermore, the ability to utilize CAD/CAM in the fabrication of PEEK enhances accuracy, reliability, and efficiency while also saving time. Hence, several orthodontic studies have explored the utilization of PEEK in various applications, such as archwires, brackets, fixed lingual retainers, palatal expansion devices, transpalatal arches, Tübingen palatal plates, different types of space maintainers, mini-implant insertion guides, and more. However, a complete systematic review of the available data comparing the performance of PEEK with traditional orthodontic materials has not yet been conducted. Therefore, this systematic review seeks to assess if PEEK material meets the required mechanical criteria to serve as an alternative to conventional orthodontic appliances. To ensure clarity and precision, this review will specifically concentrate on fixed appliances. This systemic review followed the PRISMA guidelines and utilized databases including PubMed/MEDLINE, Embase, Springer, Web of Science, and Wiley. Searches were restricted to English language articles from January 2013 to February 2024. Keywords such as "Polyetheretherketone" or "PEEK" and "Orthodontic" or "Orthodontic device" or "Orthodontic materials" were employed across all databases. Nine studies were incorporated, covering orthodontic archwires, brackets, and fixed lingual retainers. Based on the reviewed literature, PEEK demonstrates promising potential in orthodontic fixed appliances, offering advantages in force delivery, friction reduction, and aesthetic appeal. Further research is needed to fully explore its capabilities and optimize its application in clinical practice.
PubMed: 38732740
DOI: 10.3390/polym16091271 -
Journal of Clinical and Experimental... Apr 2024The objective was to investigate the influence of the material and dimensions of the orthodontic archwire on the pain and anxiety in adult patients in orthodontic...
A pilot study analyzing the influence of the material and the size of the orthodontic archwire on the level of pain and anxiety in adult patients in treatment with brackets: A prospective triple-blind randomized clinical trial.
BACKGROUND
The objective was to investigate the influence of the material and dimensions of the orthodontic archwire on the pain and anxiety in adult patients in orthodontic treatment with brackets.
MATERIAL AND METHODS
A randomized prospective triple-blind clinical pilot study was conducted at the Dental Clinic of the University of Salamanca. The study sample comprised 30 adult patients who started orthodontic treatment with brackets. This sample was divided into two groups: the NiTi group (n=15) and Cu-NiTi group (n=15). Pain was analyzed with a visual analogue scale (VAS) and anxiety with the State-Trait Anxiety Inventory (STAI). Anxiety was assessed at the start of treatment (T0) and after one month (T1). Pain was analyzed at the start of treatment (T0), at different time points at the start (T01), and after 4 (T02), 24 (T03), and 48 hours (T04); these measurements were also recorded one month after starting orthodontic treatment (T11, T12, T13, and T14).
RESULTS
The mean age of patients was 31.3 (± 6.05) years old. The highest level of pain, at the beginning of treatment, was observed after 48 hours (5.57 ± 1.72) and at one month after starting treatment at 24 hours (5.13 ± 1.89), with no significant differences between the two groups. When analyzing anxiety, no differences were observed between groups; the anxiety levels were higher one month after starting treatment compared to the start. Regarding the correlation between pain and anxiety, the NiTi group showed a greater direct relationship (<0.05) between these two variables at the start of treatment in the anxiety trait in relation to pain at T02 and T03 and after a month in T12, T13, and T14.
CONCLUSIONS
In the sample studied, there was no significant influence of the size or material of the orthodontic archwire on pain and anxiety levels. Orthodontics, Brackets, Archwire, Pain, Anxiety, NiTi, Cu-NiTi.
PubMed: 38725824
DOI: 10.4317/jced.61428 -
Clinical and Experimental Dental... Jun 2024To evaluate the effects of metal primer II (MP II) on the shear bond strength (SBS) of orthodontic brackets bonded to teeth and bis-acryl composite provisional material...
OBJECTIVE
To evaluate the effects of metal primer II (MP II) on the shear bond strength (SBS) of orthodontic brackets bonded to teeth and bis-acryl composite provisional material (Bis-Acryl).
MATERIAL AND METHODS
Twenty extracted human premolars specimens and 20 premolar shaped Bis-Acryl specimens were obtained and randomly divided into two surface groups. The first group consisted of human premolars (T) bonded to brackets in the conventional way while in the second (T-MP) MP II was applied on the bracket base before bonding. Similarly, one group of provisional material (PM) was prepared according to conventional treatment and another with the application of MP-II metal bonder (PM-MP). In all cases Ortho-brackets (Victory Series, 3 M) were bonded employing Transbond XT resin cement. Then the brackets were debonded under shear and the results were statistically analyzed by two-way analysis of variance and Holm Sidak at α = .05. The debonded surfaces of all specimens were examined by light microscopy and the Adhesive Remnant Index (ARI) was recorded.
RESULTS
The SBS results exhibited significant differences er (p < .001). For both the T and TM the application of MP-II increased the SBS compared to respective control groups (p < .001). The T-C group was found inferior compared to PM-C (p < .001) and the same is true for the comparison between T-MP and PM-MP (p < .001). ARI indexes demonstrated that the tooth groups were characterized by a predominantly adhesive failure at the resin-dentin interface. In contrast, the control group for provisional crowns (PM-C) showed a predominantly cohesive failure mode, which moved to predominantly adhesive after the application of MP II.
CONCLUSION
The application of MP II enhances the SBS on both, human enamel and provisional crown materials.
Topics: Orthodontic Brackets; Humans; Shear Strength; Resin Cements; Dental Bonding; Surface Properties; Bicuspid; Dental Stress Analysis; Materials Testing; Acrylic Resins; Composite Resins; Acid Etching, Dental; Dental Enamel
PubMed: 38712436
DOI: 10.1002/cre2.888 -
Alternative Therapies in Health and... May 2024To investigate the impact of the restoration of non-bracket invisible orthodontic titanium alloy implant on individuals with dental malocclusion and arch deficiency...
The Impact of the Restoration of Invisible Orthodontic Titanium Alloy Implant Without Bracket on Individuals Afflicted with Dental Malocclusion and Arch Deficiency Accompanied by Periodontitis and a Local Periodontal Inflammation.
OBJECTIVE
To investigate the impact of the restoration of non-bracket invisible orthodontic titanium alloy implant on individuals with dental malocclusion and arch deficiency accompanied by periodontitis and local periodontal Inflammation.
METHOD
A cohort of 120 patients presenting with dental malocclusion and defects compounded by periodontitis, were treated at our institution between January 2021 and January 2022; these patients were enrolled in a randomized controlled trial.. These patients were allocated into two groups. The control group (comprising 60 cases) underwent titanium alloy implant restoration, while the research group (also with 60 cases) received titanium alloy implant restoration following invisible orthodontic treatment without brackets. A one-year post-treatment follow-up was conducted, during which various parameters, including pain levels, aesthetic improvement, inflammatory response, dental function, oral hygiene, and the incidence of adverse events, were evaluated and compared before and after treatment between the two groups.
RESULTS
After six months of treatment, the visual analog scale (VAS) in the study group was lower than that in the control group (P < .05). After 6 months of treatment, the research team observed the changes in gingival crevicular interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), Interleuckin-1 (IL-1), plaque index (PLI), and soft dirt index (DI) were all lower than those in the control group (P < .05). After 6 months of treatment, the research group had higher scores for tooth functions such as chewing, swallowing, speech expression, and occlusion than the control group, as well as higher pink and white aesthetics indexes (P < .05). The difference in the incidence rate of adverse outcomes between the research and control group was not distinct (P > .05).
CONCLUSION
In case of dental malocclusion accompanied by periodontal disease, the utilization of titanium implants for rectifying dental arch deformities without the use of orthodontic brackets, devoid of orthodontic brackets, has demonstrated notable efficacy in alleviating patients' periodontal discomfort, their oral hygiene, and dental functionality. This modality is conducive to augmenting dental aesthetics without incurring heightened rates of unfavorable consequences, thereby enhancing treatment outcomes.
PubMed: 38702170
DOI: No ID Found -
Cureus Feb 2024Background Enamel etching is of utmost importance during the orthodontic bonding procedure. Phosphoric acid, hydrofluoric acid, and citric acid are used in specific...
Background Enamel etching is of utmost importance during the orthodontic bonding procedure. Phosphoric acid, hydrofluoric acid, and citric acid are used in specific concentrations to create surface irregularities on enamel surfaces, enhancing the bond strength of the orthodontic attachment. Therefore, it is essential to evaluate the type of etchant for reliable orthodontic bracket bonding with minimal damage to the enamel surface. Aims and objectives This study aimed to investigate the morphological changes on the enamel surface after treatment with different surface etchants, assess the depth of penetration, and evaluate the shear bond strength (SBS) of orthodontic brackets. Materials and methods One hundred and one extracted premolar teeth were used to investigate morphological changes on the enamel surface treated with 37% phosphoric acid, 11% hydrofluoric acid, and 20% citric acid. It was evaluated on a scanning electron microscope (Jeol Scientific Equipment, Jeol Limited, Akishima, Japan), and the SBS of brackets on enamel treated with different etching agents was evaluated using an Instron Universal Testing Machine (UTM; Instron Model: 5982, Universal Testing Systems, Norwood, MA). Group A had 60 test samples. Group B had 40 test samples. One control without any acid etching was used in both groups. Subgroup A1 (n = 30) was evaluated for surface characteristics of acid-etched enamel. Subgroup A2 was assessed for the penetration depth of various etchants. Group B (n = 40) was tested for SBS. The results were tabulated and analyzed using IBM SPSS Statistics, version 20.0 (IBM Corp., Armonk, NY). Post hoc Tukey HSD test and one-way analysis of variance were used to assess SBS and penetration depth of etchants (P ≤ 0.05). Pearson's correlation test was used to correlate SBS, etching pattern, and penetration depth. The chi-square test was used to test the frequency of types of etching patterns. Results Intergroup correlations between etching depth, etching pattern evaluated on SEM, and SBS evaluated on the UTM showed a high statistical correlation between etching depth & SBS, etching depth & etching pattern, and SBS & etching pattern between A1, A2, and group B (P ≤ 0.001). A highly significant negative correlation between SBS & etching pattern (P = 0.42) was observed among intra-group correlation. Non-significant correlations were found between etching depth & SBS and etching depth & etching pattern within the 20% citric acid etch group (P = 0.370 and 0.141, respectively). Conclusion Penetration depth obtained was highest with 11% hydrofluoric acid, followed by 37% phosphoric acid and 20% citric acid. In addition, 11% hydrofluoric acid showed the highest bond strength. Acid etching showed better penetration depth and bond strength than control.
PubMed: 38694184
DOI: 10.7759/cureus.54008 -
Journal of Multidisciplinary Healthcare 2024There is an overall paucity of data examining the specific details of orthodontic patients' patterns or orthodontic service disruptions possibly influenced by COVID-19...
PURPOSE
There is an overall paucity of data examining the specific details of orthodontic patients' patterns or orthodontic service disruptions possibly influenced by COVID-19 pandemic. Therefore, this study aimed to explore the impact of the COVID-19 pandemic on orthodontic clinic disruption regarding the change in adult patients' characteristics and decisions of orthodontic treatment devices.
PATIENTS AND METHODS
A retrospective sample of 311 patients receiving orthodontic treatment from 2018 to 2022 were collected and divided into two groups: before (n = 167) and during (n = 144) the COVID-19 pandemic. Demographics, dental indices, the index of complexity outcome and need (ICON), and the degree of treatment difficulty were analyzed.
RESULTS
There were fewer students among patients during the COVID-19 pandemic than before (24.5% versus 35.9%, P = 0.036). Compared with patients before the pandemic, more patients selected ceramic brackets or Invisalign during the pandemic (P = 0.022). There were higher percentage of class I dental malocclusions among patients during than before the COVID-19 pandemic (P = 0.044). Moreover, the ICON score and the score of the degree of treatment difficulty were both significantly lower for patients during than before the COVID-19 pandemic (63.9±14.0 versus 58.3±15.3, P=0.001 and 7.4±2.6 versus 6.8±2.6, P=0.049, respectively).
CONCLUSION
The COVID-19 pandemic influenced the characteristics and decisions of orthodontic patients. Those who still came to the orthodontic clinic despite the COVID-19 outbreak may have been those with less malocclusion severity and treatment difficulty. Besides, during the time of covid-19 pandemic, more patients chose ceramic bracket and Invisalign as their orthodontic treatment device rather than conventional or self-ligating metal brackets.
PubMed: 38690156
DOI: 10.2147/JMDH.S456588 -
BMC Oral Health Apr 2024Orthodontic treatment presents challenges with plaque accumulation around brackets, archwires, and elastics, leading to retained plaque and gingival inflammation.... (Randomized Controlled Trial)
Randomized Controlled Trial
BACKGROUND
Orthodontic treatment presents challenges with plaque accumulation around brackets, archwires, and elastics, leading to retained plaque and gingival inflammation. Conventional toothbrushing may not be enough, requiring additional oral hygiene aids like interproximal brushes, dental flosses, and water flossers. Limited research exists on comparing water flossing and interdental flossing in orthodontic patients. Therefore, this study aims to assess their effectiveness in maintaining oral hygiene during active orthodontic treatment.
METHODS
A single-blind, randomized, parallel clinical study recruited orthodontic patients with full-mouth brackets and archwires. Thirty participants were randomly assigned to either water jet flossing or interdental flossing groups. All participants were instructed to brush twice daily with a provided toothbrush and toothpaste and use the assigned intervention once daily at night. Clinical measures, including the Gingival Bleeding Index (BI), Plaque Index (PI), and Gingival Index (GI), were recorded at baseline and day 14. Descriptive statistics and statistical tests were performed using SPSS software.
RESULTS
The water jet flossing group demonstrated a slightly higher, albeit non-significant, benefit in plaque removal (median difference of 6.79%%, P = 0.279) and bleeding reduction (median difference of 5.21%%, P = 0.172) compared to the interdental flossing group after two weeks. Both groups showed significant reductions in gingival bleeding index and plaque index from baseline to the 2-week follow-up. The interdental flossing group had median mean percentage differences of 16.13%% (plaque index) and 23.57% (gingival bleeding index), while the water jet flossing group had median percentage differences of 21.87% (plaque index) and 32.29% (gingival bleeding index). No significant changes in gingival index grades were observed in either group.
CONCLUSION
Both water jet flossing and interdental flossing were effective in reducing plaque accumulation and gingival bleeding among orthodontic patients. While no significant differences were found between the two methods, water jet flossing showed a potential advantage. Further research is needed to validate its effectiveness, assess long-term impact, and understand its benefits for orthodontic patients.
Topics: Humans; Dental Devices, Home Care; Female; Single-Blind Method; Oral Hygiene; Male; Periodontal Index; Dental Plaque Index; Adolescent; Orthodontic Appliances, Fixed; Dental Plaque; Young Adult; Toothbrushing; Water; Adult
PubMed: 38678246
DOI: 10.1186/s12903-024-04166-0