-
BMC Musculoskeletal Disorders Jan 2024For patients with multilevel degenerative cervical myelopathy, laminectomy and posterior cervical fusions (PCF) with instrumentation are widely accepted techniques for... (Observational Study)
Observational Study
BACKGROUND
For patients with multilevel degenerative cervical myelopathy, laminectomy and posterior cervical fusions (PCF) with instrumentation are widely accepted techniques for symptom relief. However, hardware failure is not rare and results in neck pain or even permanent neurological lesions. There are no in-depth studies of hardware-related complications following laminectomy and PCF with instrumentation.
METHODS
The present study was a retrospective, single centre, observational study. Patients who underwent laminectomy and PCF with instrumentation in a single institution between January 2019 and January 2021 were included. Patients were divided into hardware failure and no hardware failure group according to whether there was a hardware failure. Data, including sex, age, screw density, end vertebra (C7 or T1), cervical sagittal alignment parameters (C2-C7 cervical lordosis, C2-C7 sagittal vertical axis, T1 slope, Cervical lordosis correction), regional Hounsfield units (HU) of the screw trajectory and osteoporosis status, were collected and compared between the two groups.
RESULTS
We analysed the clinical data of 56 patients in total. The mean overall follow-up duration was 20.6 months (range, 12-30 months). Patients were divided into the hardware failure group (n = 14) and no hardware failure group (n = 42). There were no significant differences in the general information (age, sex, follow-up period) of patients between the two groups. The differences in fusion rate, fixation levels, and screw density between the two groups were not statistically significant (p > 0.05). The failure rate of fixation ending at T1 was lower than that at C7 (9% vs. 36.3%) (p = 0.019). The regional HU values of the pedicle screw (PS) and lateral mass screw (LMS) in the failure group were lower than those in the no failure group (PS: 267 ± 45 vs. 368 ± 43, p = 0.001; LMS: 308 ± 53 vs. 412 ± 41, p = 0.001). The sagittal alignment parameters did not show significant differences between the two groups before surgery or at the final follow-up (p > 0.05). The hardware failure rate in patients without osteoporosis was lower than that in patients with osteoporosis (14.3% vs. 57.1%) (p = 0.001).
CONCLUSIONS
Osteoporosis, fixation ending at C7, and low regional HU value of the screw trajectory were the independent risk factors of hardware failure after laminectomy and PCF. Future studies should illuminate if preventive measures targeting these factors can help reduce hardware failure and identified more risk factors, and perform long-term follow-up.
Topics: Humans; Laminectomy; Lordosis; Retrospective Studies; Cervical Vertebrae; Spinal Fusion; Pedicle Screws; Osteoporosis
PubMed: 38166792
DOI: 10.1186/s12891-023-07116-z -
Asian Journal of Neurosurgery Dec 2023Understanding the anatomy of the vertebral artery is essential while manipulating the craniovertebral joint during surgery. Its anomalous course in congenital...
Understanding the anatomy of the vertebral artery is essential while manipulating the craniovertebral joint during surgery. Its anomalous course in congenital atlantoaxial dislocation makes it more vulnerable to injury. Preoperative dedicated computed tomography (CT) angiography helps identify the artery's position and plan for surgical procedure. A 13-year-boy presented with neck pain and spastic quadriparesis for 1 year. Radiological imaging of the craniovertebral junction revealed atlantoaxial instability with basilar invagination. His CT angiography of neck and brain vessels revealed an anomalous course of the vertebral artery due to a persistent second intersegment artery. He underwent posterior atlantoaxial fixation after mobilization of the vertebral artery. His clinical condition significantly improved after surgery. We report a case of management of an atlanto axial dislocation with persistent second intersegment artery and describe the role of vertebral artery mobilization during surgery.
PubMed: 38161620
DOI: 10.1055/s-0043-1776050 -
Spine Deformity Mar 2024To define the prevalence, characteristics, and treatment approach for proximal junction failure secondary to odontoid fractures in patients with prior C2-pelvis...
PURPOSE
To define the prevalence, characteristics, and treatment approach for proximal junction failure secondary to odontoid fractures in patients with prior C2-pelvis posterior instrumented fusions (PSF).
METHODS
A single institution's database was queried for multi-level fusions (6+ levels), including a cervical component. Posterior instrumentation from C2-pelvis and minimum 6-month follow-up was inclusion criteria. Patients who sustained dens fractures were identified; each fracture was subdivided based on Anderson & D'Alonzo and Grauer's classifications. Comparisons between the groups were performed using Chi-square and T tests.
RESULTS
80 patients (71.3% female; average age 68.1 ± 8.1 years; 45.0% osteoporosis) were included. Average follow-up was 59.8 ± 42.7 months. Six patients (7.5%) suffered an odontoid fracture post-operatively. Cause of fracture in all patients was a mechanical fall. Average time to fracture was 23 ± 23.1 months. Average follow-up after initiation of fracture management was 5.84 ± 4 years (minimum 1 year). Three patients sustained type IIA fractures one of which had a concomitant unilateral C2 pars fracture. Three patients sustained comminuted type III fractures with concomitant unilateral C2 pars fractures. Initial treatment included operative care in 2 patients, and an attempt at non-operative care in 4. Non-operative care failed in 75% of patients who ultimately required revision with proximal extension. All patients with a concomitant pars fracture had failure of non-operative care. Patients with an intact pars were more stable, but 50% required revision for pain.
CONCLUSIONS
In this 11-year experience at a single institution, the prevalence of odontoid fractures above a C2-pelvis PSF was 7.5%. Fracture morphology varied, but 50% were complex, comminuted C2 body fractures with concomitant pars fractures. While nonoperative management may be suitable for type II fractures with simple patterns, more complex and unstable fractures likely benefit from upfront surgical intervention to prevent fracture displacement and neural compression. As all fractures occurred secondary to a mechanical fall, inpatient and community measures aimed to minimize risk and prevent mechanical falls would be beneficial in this high-risk group.
Topics: Humans; Female; Middle Aged; Aged; Male; Odontoid Process; Spinal Fractures; Fracture Fixation, Internal; Fractures, Bone; Pelvis
PubMed: 38157096
DOI: 10.1007/s43390-023-00800-z -
Journal of Clinical Medicine Dec 2023In a multilevel cervical laminoplasty operation for patients with cervical spondylotic myelopathy (CSM), a partial or complete C3 laminectomy may be performed at the...
INTRODUCTION
In a multilevel cervical laminoplasty operation for patients with cervical spondylotic myelopathy (CSM), a partial or complete C3 laminectomy may be performed at the upper level instead of a C3 plated laminoplasty. It is unknown whether C3 technique above the laminoplasty affects loss of cervical lordosis or range of motion.
METHODS
Patients undergoing multilevel laminoplasty of the cervical spine (C3-C6/C7) at a single institution were retrospectively reviewed. Patients were divided into two cohorts based on surgical technique at C3: C3-C6/C7 plated laminoplasty ("C3 laminoplasty only", N = 61), C3 partial or complete laminectomy, plus C4-C6/C7 plated laminoplasty (N = 39). All patients had at least 1-year postoperative X-ray treatment.
RESULTS
Of 100 total patients, C3 laminoplasty and C3 laminectomy were equivalent in all demographic data, except for age (66.4 vs. 59.4 years, = 0.012). None of the preoperative radiographic parameters differed between the C3 laminoplasty and C3 laminectomy cohorts: cervical lordosis (13.1° vs. 11.1°, = 0.259), T1 slope (32.9° vs. 29.2°, = 0.072), T1 slope-cervical lordosis (19.8° vs. 18.6°, = 0.485), or cervical sagittal vertical axis (3.1 cm vs. 2.7 cm, = 0.193). None of the postoperative radiographic parameters differed between the C3 laminoplasty and C3 laminectomy cohorts: cervical lordosis (9.4° vs. 11.2°, = 0.369), T1 slope-cervical lordosis (21.7° vs. 18.1°, = 0.126), to cervical sagittal vertical axis (3.3 cm vs. 3.6 cm, = 0.479). In the total cohort, 31% had loss of cervical lordosis >5°. Loss of lordosis reached 5-10° (mild change) in 13% of patients and >10° (moderate change) in 18% of patients. C3 laminoplasty and C3 laminectomy cohorts did not differ with respect to no change (<5°: 65.6% vs. 74.3%, respectively), mild change (5-10°: 14.8% vs. 10.3%), and moderate change (>10°: 19.7% vs. 15.4%) in cervical lordosis, = 0.644. When controlling for age, ordinal regression showed that surgical technique at C3 did not increase the odds of postoperative loss of cervical lordosis. C3 laminectomy versus C3 laminoplasty did not differ in the postoperative range of motion on cervical flexion-extension X-rays (23.9° vs. 21.7°, = 0.451, N = 91).
CONCLUSION
There was no difference in postoperative loss of cervical lordosis or postoperative range of motion in patients who underwent either C3-C6/C7 plated laminoplasty or C3 laminectomy plus C4-C6/C7 plated laminoplasty.
PubMed: 38137663
DOI: 10.3390/jcm12247594 -
Frontiers in Surgery 2023Since the first description of os odontoideum in 1886, its origin has been debated. Numerous case series and reports show both a possible congenital origin and origin...
INTRODUCTION
Since the first description of os odontoideum in 1886, its origin has been debated. Numerous case series and reports show both a possible congenital origin and origin from the secondary to craniovertebral junction (CVJ) trauma. We conducted a detailed analysis of 260 surgically treated cases to document the initial symptoms, age groups, radiographic findings, and associated abnormalities, aiming to enhance the confirmation of the etiology. A literature search (1970-2022) was performed to correlate our findings.
METHODS AND MATERIALS
A total of 260 patients underwent surgical management of a referral database of 520 cases (1978-2022). All patients were examined by plain radiography and myelotomography as needed until 1984, and since then, CT and MRI have been employed. History of early childhood (aged below 6 years) CVJ trauma was investigated, including obtaining emergency department's initial radiographs from the referral and subsequent follow-up. Associated radiographic and systemic abnormalities were noted, and the atlas development was followed.
RESULTS
The age of the patients ranged from 4 to 68 years, mostly between 10 and 20 years. There were 176 males and 86 females. Orthotopic os odontoideum was identified in 24 patients, and 236 patients had dystopic os odontoideum. Associated abnormalities were found in 94 of 260 patients, with 73 exhibiting syndromic abnormalities and 21 having Chiari I malformation. Two sets of twins had spondyloepiphyseal dysplasia. Of 260 patients, 156 experienced early childhood trauma /. Among these, 54 initially presented with normal radiographs but later demonstrated anterior atlas hypertrophy. In addition, a smaller posterior C1 arch was observed, leading to the development of os odontoideum. Two children had initial CVJ trauma as documented by MRI, with subsequent classical findings of os odontoideum and atlas changes. Syndromic patients had an earlier presentation. The literature reviewed confirms the multifactorial etiology.
CONCLUSIONS
The early presentation and associated abnormalities (such as Down syndrome, Klippel-Feil syndrome, Chiari I malformation, spondyloepiphyseal dysplasia, Morquio syndrome, and others) along with case reports documenting familial, hereditary, and twin presentations strongly support a congenital origin. Likewise, surgical complications are more prevalent in syndromic patients (40%) compared to 15% in other cases, as reported in the literature. The documentation of normal odontoid in early childhood trauma cases followed by the later development of os odontoideum provides evidence supporting trauma as an etiological factor. This process also involves vascular changes in both the atlas and the formation of os odontoideum. Associated abnormalities exhibit an earlier presentation and are only seen in cases with a non-traumatic origin.
PubMed: 38116481
DOI: 10.3389/fsurg.2023.1291056 -
Case Reports in Orthopedics 2023The current case series describes three cases of fusion between the 2nd cervical vertebra, the axis (C2), and the 3rd cervical vertebra (C3), creating a C2-C3 osseous...
PURPOSE
The current case series describes three cases of fusion between the 2nd cervical vertebra, the axis (C2), and the 3rd cervical vertebra (C3), creating a C2-C3 osseous complex and highlighting its morphological type of fusion (partial or complete) and morphometric details. The developmental background of this complex is emphasized, pointing out the possible clinical significance.
MATERIALS AND METHODS
The osseous complexes were derived from disarticulated skeletons of body donors and were collected from the osseous collection of the Anatomy Department of the Medical School of the National and Kapodistrian University of Athens.
RESULTS
Three blocked vertebral complexes (2 partial and 1 complete C2-C3 osseous masses) were identified. In two cases, the vertebral bodies were partially fused and in one case were completely fused. In the 1st case, the C2-C3 complex had fused spinous processes and distinct transverse processes. Facets were completely fused on the left and partially fused on the right side. In the 2nd case, the C2-C3 complex had partially fused vertebral bodies and distinguishable spinous processes. In the 3rd case, the C2-C3 complex had completely fused vertebral bodies, facets, laminae, and transverse and spinous processes.
CONCLUSIONS
Among the three (C2-C3) fused osseous complexes, the two were partially and the one was completely ossified. The fused vertebrae were characterized by osteophytic formations (at the dens and C3 area) and osteoporotic lesions. Taking into consideration the C2-C3 fusion, and possible coexisted variants, particular caution should be made in the upper cervical area, to interpret possible neurological manifestations and to reach a safe surgical plan.
PubMed: 38076299
DOI: 10.1155/2023/3577693 -
Surgical Neurology International 2023Craniovertebral junction (CVJ) pathologies include atlantoaxial instability/deformities resulting in myelopathy, respiratory failure, and even death. Here, we describe...
BACKGROUND
Craniovertebral junction (CVJ) pathologies include atlantoaxial instability/deformities resulting in myelopathy, respiratory failure, and even death. Here, we describe the indications, preoperative planning, and intra-operative/postoperative complications following surgical management of CVJ anomalies.
METHODS
A prospective analysis of 34 patients with CVJ pathology was evaluated between 2015 and 2022. Their various etiologies included atlantoaxial instability, trauma, tuberculosis, Down's syndrome, Morquio syndrome, os odontoideum, and atlantoaxial abnormalities. Clinical outcomes were assessed using the American spinal injury association (ASIA) impairment scale score and Benzel's modified Japanese Orthopedic Association (mJOA) score. Surgical assessments included length of hospital stay, operative time, blood loss, and intraoperative postoperative complications. Radiological parameters included fusion (i.e., implant loosening/implant failure), preoperative/ postoperative atlanto-dens interval (ADI), clivus canal angle (CCA), and space available for cord (SAC).
RESULTS
Five patients were managed conservatively, while 29 patients had surgery. Operations included occipitocervical fusion (14 patients), C1-2 fusion (10 patients), C1-2 transarticular screw fixation (four patients), and one patient underwent anterior corpectomy decompression/fusion. Seven patients had vertebral artery anomalies, and 13 patients had atlantoaxial abnormalities. At the final follow-up, atlantoaxial instability (i.e., mean preoperative ADI of 6.6 ± 2.3 mm) was restored to 4.2 ± 0.6 mm, significant cord compression (i.e., with mean SAC of 8.3 ± 2.9 mm) was relieved to 17.2 ± 1.6 mm, and the mean preoperative CCA (i.e., 130.2 ± 15.3) was improved to 143.3 ± 8.3°. There was also a statistically significant improvement in the ASIA scale and mJOA score.
CONCLUSION
Surgical management of CVJ abnormalities requires expertise and meticulous planning to avoid devastating complications such as wound dehiscence and catastrophic vertebral artery injury.
PubMed: 38053702
DOI: 10.25259/SNI_790_2023 -
JMIR Rehabilitation and Assistive... Dec 2023Upper limb motor paresis is a major symptom of stroke, which limits activities of daily living and compromises the quality of life. Kinematic analysis offers an in-depth...
BACKGROUND
Upper limb motor paresis is a major symptom of stroke, which limits activities of daily living and compromises the quality of life. Kinematic analysis offers an in-depth and objective means to evaluate poststroke upper limb paresis, with anticipation for its effective application in clinical settings.
OBJECTIVE
This study aims to compare the movement strategies of patients with hemiparesis due to stroke and healthy individuals in forward reach and hand-to-mouth reach, using a simple methodology designed to quantify the contribution of various movement components to the reaching action.
METHODS
A 3D motion analysis was conducted, using a simplified marker set (placed at the mandible, the seventh cervical vertebra, acromion, lateral epicondyle of the humerus, metacarpophalangeal [MP] joint of the index finger, and greater trochanter of the femur). For the forward reach task, we measured the distance the index finger's MP joint traveled from its starting position to the forward target location on the anterior-posterior axis. For the hand-to-mouth reach task, the shortening of the vertical distance between the index finger MP joint and the position of the chin at the start of the measurement was measured. For both measurements, the contributions of relevant upper limb and trunk movements were calculated.
RESULTS
A total of 20 healthy individuals and 10 patients with stroke participated in this study. In the forward reach task, the contribution of shoulder or elbow flexion was significantly smaller in participants with stroke than in healthy participants (mean 52.5%, SD 24.5% vs mean 85.2%, SD 4.5%; P<.001), whereas the contribution of trunk flexion was significantly larger in stroke participants than in healthy participants (mean 34.0%, SD 28.5% vs mean 3.0%, SD 2.8%; P<.001). In the hand-to-mouth reach task, the contribution of shoulder or elbow flexion was significantly smaller in participants with stroke than in healthy participants (mean 71.8%, SD 23.7% vs mean 90.7%, SD 11.8%; P=.009), whereas shoulder girdle elevation and shoulder abduction were significantly larger in participants with stroke than in healthy participants (mean 10.5%, SD 5.7% vs mean 6.5%, SD 3.0%; P=.02 and mean 16.5%, SD 18.7% vs mean 3.0%, SD 10.4%; P=.02, respectively).
CONCLUSIONS
Compared with healthy participants, participants with stroke achieved a significantly greater distance via trunk flexion in the forward reach task and shoulder abduction and shoulder girdle elevation in the hand-to-mouth reach task, both of these differences are regarded as compensatory movements. Understanding the characteristics of individual motor strategies, such as dependence on compensatory movements, may contribute to tailored goal setting in stroke rehabilitation.
PubMed: 38051570
DOI: 10.2196/50571 -
Clinics in Orthopedic Surgery Dec 2023To evaluate the feasibility of treating odontoid fractures in the Chinese population with two cortical screws based on computed tomography (CT) scans and describe a new...
BACKGROUND
To evaluate the feasibility of treating odontoid fractures in the Chinese population with two cortical screws based on computed tomography (CT) scans and describe a new measurement strategy to guide screw insertion in treating these fractures.
METHODS
A retrospective review of cervical computed tomographic scans of 128 patients (aged 18-76 years; men, 55 [43.0%]) was performed. The minimum external transverse diameter (METD), minimum external anteroposterior diameter (MEAD), maximum screw length (MSL), and screw projection back angle (SPBA) of the odontoid process were measured on coronal and sagittal CT images.
RESULTS
The mean values of METD and MEAD were 10.0 ± 1.1 mm and 12.0 ± 1.0 mm, respectively, in men and 9.2 ± 1.0 mm and 11.0 ± 1.0 mm, respectively, in women. Both measurements were significantly higher in men ( < 0.001). In total, 87 individuals (68%) had METD > 9.0 mm that could accommodate two 3.5-mm cortical screws. The mean MSL value and SPBA range were 34.4 ± 2.9 mm and 13.5°-24.2°, respectively, with no statistically significant difference between men and women.
CONCLUSIONS
The insertion of two 3.5-mm cortical screws was possible for anterior fixation of odontoid fractures in 87 patients (68%) in our study, and there was a statistically significant difference between men and women.
Topics: Female; Humans; Male; Bone Screws; East Asian People; Feasibility Studies; Fracture Fixation, Internal; Fractures, Bone; Odontoid Process; Spinal Fractures; Tomography, X-Ray Computed; Adolescent; Young Adult; Adult; Middle Aged; Aged
PubMed: 38045572
DOI: 10.4055/cios23094