-
Science Advances May 2024High water recovery is crucial to inland desalination but is impeded by mineral scaling of the membrane. This work presents a two-step modification approach for grafting...
High water recovery is crucial to inland desalination but is impeded by mineral scaling of the membrane. This work presents a two-step modification approach for grafting high-density zwitterionic pseudo-bottle-brushes to polyamide reverse osmosis membranes to prevent scaling during high-recovery desalination of brackish water. Increasing brush density, induced by increasing reaction time, correlated with reduced scaling. High-density grafting eliminated gypsum scaling and almost completely prevented silica scaling during desalination of synthetic brackish water at a recovery ratio of 80%. Moreover, scaling was effectively mitigated during long-term desalination of real brackish water at a recovery ratio of 90% without pretreatment or antiscalants. Molecular dynamics simulations reveal the critical dependence of the membrane's silica antiscaling ability on the degree to which the coating screens the membrane surface from readily forming silica aggregates. This finding highlights the importance of maximizing grafting density for optimal performance and advanced antiscaling properties to allow high-recovery desalination of complex salt solutions.
PubMed: 38781328
DOI: 10.1126/sciadv.adm7668 -
Chemosphere Aug 2024This study focuses on the removal and risk assessment of twenty emerging contaminants (ECs) and heavy metals in a REMIX water treatment plant (RWTP) that produces...
This study focuses on the removal and risk assessment of twenty emerging contaminants (ECs) and heavy metals in a REMIX water treatment plant (RWTP) that produces drinking water from combination of wastewater reuse and desalination. The membrane biological reactor (MBR) exhibit removal rates exceeding 95% of pharmaceuticals like acetaminophen, trimethoprim, diclofenac, naproxen, and emtricitabine. The efficiency of brackish reverse osmosis (BWRO) in removing ECs is highlighted, showing substantial efficacy with reduction rates of 99.5%, 75.5%, and 51.2% for sulfamethoxazole, venlafaxine, and benzotriazole, respectively. The advanced oxidation process based on Fenton process reveals removal (>95%) of emtricitabine, efavirenz, and carbamazepine. The study confirms that the combination of treatment units within the RWTP effectively removes heavy metals (>90%), complying with acceptable limits. Risk quotient (RQ) calculations indicate the efficiency of the RWTP in EC removal, serving as benchmarks for public acceptance of reclaimed water. In the context of heavy metals, the study concludes negligible cancer risks associated with reclaimed water consumption over a lifetime. Quantitative structure-activity relationship and occurrence, persistence, bioaccumulation and toxicity (OPBT) models were used to assess EC risk. The study screened and identified potential persistant, bio accumulating and toxic PBT ECs. Critical control points (CCPs) in the RWTP are identified, with brackish and seawater reverse osmosis (BWRO and SWRO) and advanced oxidation process (AOP) recognized as pivotal in hazard management. The study provides valuable insights on the removal of ECs and heavy metals in a wastewater reuse process and demonstrates potential of adopted process configuration in supplying safe drinking water from wastewater recycling.
Topics: Water Pollutants, Chemical; Metals, Heavy; Wastewater; Risk Assessment; Water Purification; Drinking Water; Humans; Waste Disposal, Fluid
PubMed: 38777194
DOI: 10.1016/j.chemosphere.2024.142396 -
The Science of the Total Environment Jul 2024Perfluorooctanoic acid (PFOA) is a persistent compound, raising considerable global apprehension due to its resistance to breakdown and detrimental impacts on human...
Perfluorooctanoic acid (PFOA) is a persistent compound, raising considerable global apprehension due to its resistance to breakdown and detrimental impacts on human health and aquatic environments. Pressure-driven membrane technologies treating PFAS-contaminated water are expensive and prone to fouling. This study presented a parametric investigation of the effectiveness of cellulose triacetate membrane in the forward osmosis (FO) membrane for removing PFOA from an aqueous solution. The study examined the influence of membrane orientation modes, feed pH, draw solution composition and concentration, and PFOA concentration on the performance of FO. The experimental results demonstrated that PFOA rejection was 99 % with MgCl and slightly >98 % with NaCl draw solutions due to the mechanism of PFOA binding to the membrane surface through Mg ions. This finding highlights the crucial role of the draw solution's composition in PFOA treatment. Laboratory results revealed that membrane rejection of PFOA was 99 % at neutral and acidic pH levels but decreased to 95 % in an alkaline solution at pH 9. The decrease in membrane rejection is attributed to the dissociation of the membrane's functional groups, consequently causing pore swelling. The results were confirmed by calculating the average pore radius of the CTA membrane, which increased from 27.94 nm at pH 5 to 30.70 nm at pH 9. Also, variations in the PFOA concentration from 5 to 100 mg/L did not significantly impact the membrane rejection, indicating the process's capability to handle a wide range of PFOA concentrations. When seawater was the draw solution, the FO membrane rejected 99 % of PFOA concentrations ranging from 5 mg/L to 100 mg/L. The CTA FO treating PFOA-contaminated wastewater from soil remediation achieved a 90 % recovery rate and water flux recovery of 96.5 % after cleaning with DI water at 40 °C, followed by osmotic backwash. The results suggest the potential of using abundant and cost-effective natural solutions in the FO process, all without evident membrane fouling.
PubMed: 38777064
DOI: 10.1016/j.scitotenv.2024.173368 -
Nature Communications May 2024Constructing nanolaminate membranes made of two-dimensional graphene oxide nanosheets has gained enormous interest in recent decades. However, a key challenge facing...
Constructing nanolaminate membranes made of two-dimensional graphene oxide nanosheets has gained enormous interest in recent decades. However, a key challenge facing current graphene-based membranes is their poor rejection for monovalent salts due to the swelling-induced weak nanoconfinement and the transmembrane co-transport of anions and cations. Herein, we propose a strategy of electrostatic-induced ion-confined partitioning in a reduced graphene oxide membrane for breaking the correlation of anions and cations to suppress anion-cation co-transport, substantially improving the desalination performance. The membrane demonstrates a rejection of 95.5% for NaCl with a water permeance of 48.6 L m h bar in pressure-driven process, and it also exhibits a salt rejection of 99.7% and a water flux of 47.0 L m h under osmosis-driven condition, outperforming the performance of reported graphene-based membranes. The simulation and calculation results unveil that the strong electrostatic attraction of membrane forces the hydrated Na to undergo dehydration and be exclusively confined in the nanochannels, strengthening the intra-nanochannel anion/cation partitioning, which refrains from the dynamical anion-cation correlations and thereby prevents anions and cations from co-transporting through the membrane. This study provides guidance for designing advanced desalination membranes and inspires the future development of membrane-based separation technologies.
PubMed: 38773152
DOI: 10.1038/s41467-024-48681-8 -
Discover Nano May 2024Nanofiltration (NF) and reverse osmosis (RO) processes are physical separation technologies used to remove contaminants from liquid streams by employing dense... (Review)
Review
Nanofiltration (NF) and reverse osmosis (RO) processes are physical separation technologies used to remove contaminants from liquid streams by employing dense polymer-based membranes with nanometric voids that confine fluids at the nanoscale. At this level, physical properties such as solvent and solute permeabilities are intricately linked to molecular interactions. Initially, numerous studies focused on developing macroscopic transport models to gain insights into separation properties at the nanometer scale. However, continuum-based models have limitations in nanoconfined situations that can be overcome by force field molecular simulations. Continuum-based models heavily rely on bulk properties, often neglecting critical factors like liquid structuring, pore geometry, and molecular/chemical specifics. Molecular/mesoscale simulations, while encompassing these details, often face limitations in time and spatial scales. Therefore, achieving a comprehensive understanding of transport requires a synergistic integration of both approaches through a multiscale approach that effectively combines and merges both scales. This review aims to provide a comprehensive overview of the state-of-the-art in multiscale modeling of transport through NF/RO membranes, spanning from the nanoscale to continuum media.
PubMed: 38771417
DOI: 10.1186/s11671-024-04020-w -
ACS Applied Materials & Interfaces Jun 2024Energy-efficient water desalination is the key to tackle the challenges with drought and water scarcity that affect 1.2 billion people. The material and type of membrane...
Energy-efficient water desalination is the key to tackle the challenges with drought and water scarcity that affect 1.2 billion people. The material and type of membrane in reverse osmosis water desalination are the key factors in their efficiency. In this work, we explored the potential of a graphene-MoS heterostructure membrane for water desalination, focusing on bilayer membranes and their advantages over monolayer counterparts. Through extensive molecular dynamics simulation and statistical analysis, the bilayer MoS-graphene was investigated and compared to the monolayer of graphene and MoS. By optimizing the heterostructure membrane, improved water flux was achieved while maintaining a high ion rejection rate. Furthermore, the study delves into the physical mechanisms underlying the superior performance of heterostructure nanopores, comparing them with circular bilayer and monolayer pores. Factors investigated include water structure, hydration shell near the membrane surface, water density, energy barrier using the potential of mean force, and porosity within the nanopore. Our findings contribute to the understanding of heterostructure membranes and their potential in enhancing the water desalination efficiency, providing valuable insights for future membrane design and optimization.
PubMed: 38769617
DOI: 10.1021/acsami.4c01960 -
Scientific Reports May 2024Stratified water columns are often found in lakes and oceans. Stratifications result from differences in density due to salt concentration, temperature, solid content...
Stratified water columns are often found in lakes and oceans. Stratifications result from differences in density due to salt concentration, temperature, solid content and oxygenation. The stability of stratifications affects bioactivity, sedimentation, contaminant transport and environmental remediation. This study investigates the evolution of 6 stratified water columns created by differences in salinity, suspended minerals and the presence of a bottom heat source. We use acoustic wave reflection, photography, and both electrical conductivity and temperature profiles to track changes in stratification. Results show that multiple concurrent processes emerge across layers in otherwise quiescent water bodies. Dissimilar chemo-thermo conditions give rise to chemical and thermal diffusion, convection, and double-diffusion convection. When stratification involves suspended particles, interlayer processes include diffusiophoresis, flocculation/aggregation, sedimentation, osmosis, and chemo-consolidation; in this case, the specific surface and surface charge of suspended particles, and the salt concentration in contiguous layers determine aggregation-sedimentation-consolidation patterns. The interlayer transition zone acts as a high-pass filter that preferentially reflects low-frequency long-wavelength P-waves; invasive thermal and electrical conductivity probes provide complementary information and may identify stratification even when it is undetected by acoustic signals.
PubMed: 38769161
DOI: 10.1038/s41598-024-62035-w -
ACS ES&T Engineering May 2024Cost-optimization models are powerful tools for evaluating emerging water treatment processes. However, to date, optimization models do not incorporate detailed chemical...
Cost-optimization models are powerful tools for evaluating emerging water treatment processes. However, to date, optimization models do not incorporate detailed chemical reaction phenomena, limiting the assessment of pretreatment and mineral scaling. Moreover, novel approaches for high-salinity and high-recovery desalination are typically proposed without direct quantification of pretreatment needs or mineral scaling. This work addresses a critical gap in the literature by presenting a modeling framework that includes complex water chemistry predictions with process-scale optimization. We use this approach to conduct a technoeconomic assessment on a conceptual high-recovery treatment train that includes chemical pretreatment (i.e., soda ash softening and recarbonation) and membrane-based desalination (i.e., standard and high-pressure reverse osmosis). We demonstrate how to develop and integrate accurate multidimensional surrogate models for predicting precipitation, pH, and mineral scaling tendencies. Our findings show that cost-optimal results balance the costs of pretreatment with reverse osmosis system design. Optimizing across a range of water recoveries (i.e., 50-90%) reveals multiple cost-optimal schemas that vary the chemical dosing in pretreatment and the design and operation of reverse osmosis. Our results reveal that pretreatment costs can be more than double the cost of the primary desalination process at high recoveries due to the extensive pretreatment required to control scaling. This work emphasizes the importance of and provides a framework for including chemistry and mineral scaling predictions in the evaluation of emerging technologies in high-recovery desalination.
PubMed: 38751651
DOI: 10.1021/acsestengg.3c00537 -
Scientific Reports May 2024Due to the high volume of wastewater produced from dairy factories, it is necessary to integrate a water recovery process with the treatment plant. Today, bipolar...
Due to the high volume of wastewater produced from dairy factories, it is necessary to integrate a water recovery process with the treatment plant. Today, bipolar membrane electrodialysis units (BMEUs) are increasingly developed for wastewater treatment and reutilizing. This article aims to develop and evaluate (technical and cost analyses) a combined BMEU/batch reverse osmosis unit (BROU) process for the recovery of chemicals and water from the dairy wastewater plant. The combined BROU/BMEU process is able to simultaneously produce water and strong base-acid, and reduce power consumption due to the injection of concentrated feed flow into the BMEU. A comprehensive comparative analysis on the performances of two combined and stand-alone BMEU configurations are developed. The proposed combined technology for dairy factory wastewater treatment is designed on a new structure and configuration that can address superior cost analysis compared to similar technologies. Further, the optimal values of permeate flux and current density as two vital and influencing parameters on the performance of the studied dairy wastewater treatment process were calculated and discussed. From the outcomes, the total cost of production in the combined configuration has been reduced by approximately 26% compared to the stand-alone configuration. Increasing the feed concentration rate using the batch reverse osmosis process for the dairy wastewater treatment process can be an ideal solution from an economic point of view. Moreover, point (current density, feed concentration rate, total unit cost) = can be considered as an optimal point for the economic performance of the studied wastewater treatment process.
PubMed: 38750120
DOI: 10.1038/s41598-024-61699-8 -
Global Challenges (Hoboken, NJ) May 2024The acute water and electricity shortages in Gaza necessitate comprehensive solutions that recognize the interconnected nature of these vital resources. This article...
The acute water and electricity shortages in Gaza necessitate comprehensive solutions that recognize the interconnected nature of these vital resources. This article presents pragmatic solutions to align supply with fundamental needs in both domains, offering viable pathways for achieving strategic water-energy security in Gaza. Baseline data reveals a deficit in the current water supply, falling below the international minimum of 100 L per capita per day, while the reported 137-189 MW per day electricity supply significantly lags behind the estimated 390 MW per day peak demand. To meet projected 2024 residential, commercial, and industrial demands, this study proposes actionable measures including expanding wastewater treatment to enable over 150 MCM per year tertiary effluents for agricultural reuse and adopting energy-efficient forward osmosis-reverse osmosis and osmotically assisted reverse osmosis desalination methods to increase potable water supply to 150 MCM per year. Electricity supply strategies include scaling renewable capacity towards 110 MW per day, exploring regional cooperation to unlock over 360 MW of power per day, and potentially recovering up to 60 MW per day through system efficiencies. These recommendations aim to prevent exacerbated scarcity and alleviate hardships in Gaza.
PubMed: 38745562
DOI: 10.1002/gch2.202300304