-
Journal of Clinical Medicine Jun 2024Floating-Harbor syndrome (FHS) is an extremely rare genetic disorder connected with a distinctive facial appearance, various skeletal malformations, delayed bone age,...
Floating-Harbor syndrome (FHS) is an extremely rare genetic disorder connected with a distinctive facial appearance, various skeletal malformations, delayed bone age, and expressive language delays. It is caused by heterozygous mutations in the Snf2-related CREBBP activator protein (SRCAP) gene. The aim of this paper is to describe the case of a 14-year-old male with FHS, referring to a review of the literature, and to collect all reported symptoms. In addition, the orthodontic treatment of the patient is described. For this, the electronic databases PubMed and Scopus were searched using the keyword "Floating-Harbor syndrome". Similar to previous cases in the literature, the patient presented with short stature; a triangular face with a large bulbous nose; deep-set eyes and narrow eyelid gaps; a wide mouth with a thin vermilion border of the upper lip; and dorsally rotated, small ears. They also presented some less-described symptoms, such as macrodontia and micrognathia. Moreover, mild mental retardation, microcephaly, and delayed psychomotor development were found. On the basis of an extraoral, intraoral examination, X-rays, and CBCT, he was diagnosed with overbite, canine class I and angle class III, on both sides. To the best of our knowledge, orthodontic treatment of this disease has not been assessed in detail so far, so this is the first case.
PubMed: 38929963
DOI: 10.3390/jcm13123435 -
Journal of Pharmacy & Bioallied Sciences Apr 2024Class II malocclusions are a common orthodontic problem, often requiring comprehensive treatment to achieve proper occlusion and facial harmony. Early orthodontic...
BACKGROUND
Class II malocclusions are a common orthodontic problem, often requiring comprehensive treatment to achieve proper occlusion and facial harmony. Early orthodontic intervention in the mixed dentition phase has been advocated to address these issues.
MATERIALS AND METHODS
A retrospective analysis was conducted on a cohort of 150 patients with class II malocclusions who underwent early orthodontic treatment between the ages of 7 and 10 years. The treatment included fixed or removable appliances, headgear, and functional appliances, depending on individual needs. Records of their initial malocclusion severity, treatment modalities, and long-term follow-up data (mean follow-up duration of 10 years) were collected and analyzed. Stability was assessed by evaluating overjet and overbite changes from post-treatment to the long-term follow-up.
RESULTS
The initial mean overjet and overbite values were 8.5 mm and 4.0 mm, respectively. Following early orthodontic intervention, these values were significantly reduced to 3.0 mm and 1.5 mm, respectively ( < 0.001). At the long-term follow-up, the mean overjet and overbite remained stable at 3.2 mm and 1.6 mm, respectively. Analysis revealed that 85% of patients maintained their corrected class II occlusion within clinically acceptable limits, while 15% experienced minor relapse requiring minimal additional treatment.
CONCLUSION
Early orthodontic treatment in class II malocclusions can lead to significant improvements in overjet and overbite, and these corrections tend to remain stable over the long term.
PubMed: 38882812
DOI: 10.4103/jpbs.jpbs_1171_23 -
Journal of Dental Research, Dental... 2024The present study investigated the skeletal and dental effect in class II division I growing patients due to mandibular deficiency treated with the hybrid aesthetic...
Evaluation of the skeletal and dental effects of a hybrid aesthetic functional appliance (HAF) in skeletal class II division 1 malocclusion: A prospective uncontrolled clinical trial.
BACKGROUND
The present study investigated the skeletal and dental effect in class II division I growing patients due to mandibular deficiency treated with the hybrid aesthetic functional (HAF) appliance.
METHODS
A sample of 16 growing patients (5 boys and 11 girls; mean age: 9.50 years, standard deviation: 1.15) with class II division I malocclusion were treated using the HAF appliance for an average period of 10±3 months. For each patient, a cephalometric radiograph was taken before and after treatment, and digital analysis was applied using the WebCeph program. The statistical analysis was performed to evaluate dental and skeletal changes associated with the HAF appliance and determine if there were any statistically significant variations in anatomical measurements between the start and completion of the treatment.
RESULTS
The data showed a significant increase in SNB angle (=0.002), leading to a significant decrease in ANB angle (=0.001). The mandibular length significantly increased (=0.008), the lower incisors were flared significantly (=0.028), and the lower molars were extruded significantly (≤0.001). Also, this study revealed a significant decrease in Wits appraisal (≤0.001), overjet (≤0.001), and overbite (=0.041). Additionally, a significant increase in lower anterior facial height (≤0.001), total facial height (=0.001), and posterior facial height (=0.037) were observed.
CONCLUSION
The HAF appliance showed that it could be used to correct class II division 1 skeletal discrepancy by mandibular advancement. The HAF appliance increased all facial heights significantly.
PubMed: 38881637
DOI: 10.34172/joddd.40732 -
Cureus May 2024Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and...
Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and upper-lip hypertrophy who underwent surgical orthodontic treatment for correction of a large overjet and deep overbite. In addition to the a large overjet and deep overbite, interdental spacing was observed in both the arches. The mandible was retrognathic and deviated to the right side. No maxillary occlusal canting or temporomandibular joint symptoms were observed. The patient was diagnosed with skeletal maxillary protrusion with spaced dentition and mandibular deviation to the right due to SWS. After presurgical orthodontic treatment using a multibracket appliance, we performed a sagittal split ramus osteotomy (SSRO) alone due to the presence of a hemangioma around the maxilla. No abnormal bleeding or cerebral hemorrhage due to increased blood pressure was observed during the SSRO. Postoperatively, the maxillary and mandibular arches were well-aligned, the deep overbite and excessive overjet improved, and bilateral angle class I molar and canine relationships were established. Furthermore, mandibular deviation improved, and the midlines of both arches approximately coincided with the facial midline. In conclusion, orthognathic surgery is feasible in patients with SWS after carefully evaluating the sites and sizes of the hemangiomas.
PubMed: 38854229
DOI: 10.7759/cureus.59964 -
BMC Oral Health Jun 2024This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
BACKGROUND
This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
METHODS
A stratified cluster sample of 1278 schoolchildren (620 males, 658 females, mean age 12 years and 5 months (± 0.5)) were examined. Candidates who had not received any previous orthodontic treatment were only included. Dental anomalies like missing and ectopic teeth were recorded. The anteroposterior occlusal relationship was assessed based on Angle classification. Overjet and overbite were measured. Crowding and spacing were recorded subjectively. In addition, crossbite, openbite, and midline displacement were recorded. The chi-square test and descriptive analysis were used statistically.
RESULTS
The study found Angle Class I molar relationship in 65%, Class II div 1 in 17%, Class II div 2 in 6%, and Class III in 12% of the sample. An overjet (OJ) of more than 4 mm was present in 17%, and 4% had OJ of more than 6 mm; an OJ of at least 0 mm or less in 36%, and 6% had a reverse OJ. A normal overbite was observed in 53%, while 28% had an increase and 19% had a decreased overbite. An anterior openbite (AOB) was present in 9%, and a scissor bite or anterior crossbite in 6% and 14%, respectively. A posterior crossbite was observed in 12% (9% unilateral and 3% bilateral). Midline displacement was found in (9%). Crowding was observed in 35% and 31% and spacing in 24% and 15% of the maxillary and mandibular arches, respectively. A statistically significant relationship between gender and midline shift, a diastema, spacing in the upper arch, and most dental anomalies was found; males were more affected (p < 0.05).
CONCLUSION
This study reported a high prevalence of malocclusion among schoolchildren in Palestine. A collaborative effort should be directed to obtain more monitoring and surveillance of malocclusion more frequently to prevent and control the exacerbation of the problem.
Topics: Humans; Male; Female; Malocclusion; Child; Prevalence; Overbite; Malocclusion, Angle Class II; Arabs; Malocclusion, Angle Class III; Diastema; Malocclusion, Angle Class I; Middle East; Open Bite; Tooth Eruption, Ectopic; Anodontia; Sex Factors; Adolescent
PubMed: 38849789
DOI: 10.1186/s12903-024-04432-1 -
International Orthodontics May 2024The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign®...
OBJECTIVE
The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign® aligners (Align Technology, San Jose, California) with those planned by orthodontists via its ClinCheck® digital treatment planning facility.
METHODS
Data provided by Align regarding patients who had completed an initial series of Invisalign® aligner treatment and were less than 18-years old were assessed in relation to pre-treatment, planned and achieved overjet and overbite measurements. Descriptive statistics, Wilcoxon rank-sum, Mann Whitney calculations were computed.
RESULTS
A total of 290 patients satisfied inclusion criteria. The median (interquartile range (IQR)) age was 14.17 (13,15.42) years. The median achieved overjet and overbite changes were less than those planned (p<0.01) with 53.33% of the planned median overjet increase achieved and 52.94% of planned median overjet reduction achieved. Additionally, 58.33% of the planned median overbite increase was achieved and 55.55% of the planned median overbite reduction was achieved. A total of 21.52% patients recorded no change or an increase from pre-treatment to the achieved overjet where reduction was planned, whereas 41.67% recorded no change or a reduction in overjet where increase was planned. A total of 18.72% recorded no change or an increase in overbite where reduction was planned, whereas 20.75% recorded no change or a reduction in overbite where increase was planned.
CONCLUSIONS
Less than 60% of the planned overjet and overbite changes per patient were achieved. Between 18.72 and 41.67% of patients experienced no change or changes in overjet and overbite in the opposite direction to that planned. This is likely to be clinically significant.
PubMed: 38805975
DOI: 10.1016/j.ortho.2024.100888 -
International Journal of Dentistry 2024Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and...
BACKGROUND
Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and treating occlusal problems and their potential consequences on TMD.
OBJECTIVES
To investigate the relationship of occlusal features and some of the TMD parameters. . The current cross-sectional study was conducted on 200 TMD patients seeking dental treatment at different dental centers in Baghdad city, aged 18-35 years. All participants underwent assessment for occlusal features, which were molar and canine classifications, overjet, posterior buccal or lingual crossbites, and overbites, and TMD parameters (muscle pain, TMJ pain, and clicking) using the Chi-square test for statistical analysis.
RESULTS
Regarding molar classification, there were strong positive correlations between subjects with TMD and having different molar classifications (class I, II, and III) bilaterally or unilaterally; furthermore, there were strong positive correlations between subjects with TMD and having different canine classifications. Moreover, there were significant correlations between subjects with increased, normal, or decreased overjet and the TMD parameters. In addition, there were weak positive correlations between TMD occurrence and buccal or lingual posterior crossbite. On the other hand, there were significant correlations between subjects with a decreased overbite and the presence of TMD parameters.
CONCLUSION
TMD had a multifactorial background rather than dependability on a specific molar or canine classification type. There was also a correlation between overjet and TMD muscle pain, while decreased overbite was correlated to muscle and TMJ pain. Conversely, there is no vital correlation between posterior buccal or lingual crossbite occurrence and TMD parameters.
PubMed: 38798761
DOI: 10.1155/2024/8715166 -
Journal of Clinical Medicine May 2024This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The...
This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The research sought to understand how the COS's anatomical dimensions correlate with different classes of malocclusion and the position of the frontal teeth. A total of 265 participants from the Dentistry Ambulatory of the Military Hospital of Sibiu were included in this study. It employed digital intraoral scanning technology to measure the COS, overjet, and overbite, with malocclusion classification. Statistical analyses, including correlation and regression, were conducted to examine the relationships between COS depth, frontal teeth position, and malocclusion characteristics. The average COS depth measured was 1.0564 mm, presenting variability when compared to existing literature. Most of the study participants had Class I malocclusion. A significant positive correlation between COS depth and overjet was identified, with no notable gender-based differences in these occlusal parameters. The findings affirm the integral role of COS in occlusal dynamics and malocclusion diagnosis. The COS measurement of a mean of 1.0564 mm, when compared to other results emphasizes the differences in occlusal curvature among various populations. The results contribute to a refined understanding of occlusal relationships, supporting the need for personalized orthodontic and prosthetic treatments based on precise anatomical measurements.
PubMed: 38792296
DOI: 10.3390/jcm13102750 -
Journal of Clinical Medicine May 2024We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent...
We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.
PubMed: 38792293
DOI: 10.3390/jcm13102753 -
Biomimetics (Basel, Switzerland) May 2024An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical...
An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical advantage. The following case report concerns the Biga system, a strategy that supports orthodontists during class II corrections and vertical control through treatment. A 12-year-old girl with a high angle of skeletal class II was selected. A novel biomechanical strategy was effectively applied using two tads on the upper arch to obtain sequential distalization of the upper teeth and to correct the lower arch spee curve using third-class elastics. Eventually, on the same tads, a double cantilever was applied to control the overbite and intrusion during incisors' retraction. The Biga system is an easy biomechanical strategy that ensures the three-dimensional control of treatment mechanics in class II patients.
PubMed: 38786515
DOI: 10.3390/biomimetics9050305