-
Experimental Neurobiology Feb 2024The benefit of intranasal brain derived neurotrophic factor (BDNF) treatment on cognitive function in a neonatal postnatal day 7 (P7) mouse model of hypoxic ischemia...
The benefit of intranasal brain derived neurotrophic factor (BDNF) treatment on cognitive function in a neonatal postnatal day 7 (P7) mouse model of hypoxic ischemia (HI) was explored. Intranasal delivery is attractive in that it can promote widespread distribution of BDNF within both the brain and spinal cord. In this study we evaluated the effectiveness of intranasal BDNF to improve cognitive recovery following HI. HI is induced via ligation of the right carotid artery followed by a 45-minute exposure to an 8% oxygen/ 92% nitrogen mixture in an enclosed chamber. Male and female pups were subjected to a 2-hour hypothermia in a temperature-controlled chamber as a standard of care. A solution of saline (control) or recombinant human BDNF (Harlan Laboratories) was administered with a Gilson pipette at the same time each day for 7 days into each nasal cavity in awake mice beginning 24 hours after HI. We evaluated cognitive recovery using the novel object recognition (NOR) and western analysis to analyze neuro-markers and brain health such as synaptophysin and microtubule associated protein -2 (MAP2). The objective of this study was to evaluate the role and therapeutic potential of BDNF in neonatal HI recovery. Our results indicate that intranasal BDNF delivered within 24 hours after HI improved object discrimination at both 28 and 42 days after HI. Our results also demonstrate increased synaptophysin and MAP2 at day 42 in HI animals that received intranasal BDNF treatment compared to HI animals that were administered saline.
PubMed: 38471802
DOI: 10.5607/en23030 -
Cureus Feb 2024This case report explores the application of mechanical hatching as a successful intervention in the treatment of primary infertility for a couple with a consanguineous...
This case report explores the application of mechanical hatching as a successful intervention in the treatment of primary infertility for a couple with a consanguineous marriage history and recurrent implantation failure. A 32-year-old female patient and her 37-year-old spouse, after six years of unsuccessful attempts to conceive, underwent multiple intrauterine insemination (IUI) and in vitro fertilization (IVF) and embryo transfer (ET) cycles without success. Normal parameters were observed in semen analysis and hormone tests for the male and female partners, respectively. Despite a series of failed assisted reproductive technology (ART) procedures, the implementation of mechanical hatching using partial zona dissection (PZD) pipettes led to a positive pregnancy outcome. The case underscores the potential efficacy of individualized approaches, specifically mechanical hatching, in addressing challenges associated with implantation failure, offering hope to couples facing infertility issues.
PubMed: 38455805
DOI: 10.7759/cureus.53709 -
Diagnostic Microbiology and Infectious... May 2024The Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pandemic led to global shortages in laboratory consumables, in particular for automated PCR. The...
The Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pandemic led to global shortages in laboratory consumables, in particular for automated PCR. The Technical University of Denmark supported Danish hospitals from 2020 to 2022, conducting SARS-CoV-2 RT-qPCR on around 10,000 patient samples daily. We encountered shortages of disposable pipette tips used with automated liquid handlers that transferred oropharyngeal swab samples to 96-well microplates before RNA extraction. To enable tip reuse, we developed an automated protocol for washing tips with a 0.5 % sodium hypochlorite solution. This effectively eliminated carry-over of genomic material and the wash solution remained effective when stored in an open reservoir at ambient temperatures for 24 h. A three-day validation setup demonstrated the robustness of the tip wash protocol. Reducing the number of tips used for transferring samples to 96-well microplates from 96 to 8 enabled us to mitigate pipette tip shortages, lower costs, and minimize plastic waste generation.
Topics: Humans; SARS-CoV-2; COVID-19; COVID-19 Testing; Laboratories; RNA, Viral
PubMed: 38452555
DOI: 10.1016/j.diagmicrobio.2024.116241 -
Analytica Chimica Acta Apr 2024Opioids are effective painkillers used for medical purposes. Their prolonged ingestion can provoke some side effects (including overdose or constipation) that are...
BACKGROUND
Opioids are effective painkillers used for medical purposes. Their prolonged ingestion can provoke some side effects (including overdose or constipation) that are minimized by using opioid antagonists (e.g., naloxone). The rapid determination of opioids and their antagonists in biosamples is essential for an effective medical treatment. The direct combination of sample preparation and mass spectrometry (MS) fits well in this scenario. It can speed up the analysis achieving a good selectivity, which relies on the sample preparation and MS, and sensitivity levels.
RESULTS
This article presents a novel substrate-spray mass spectrometry interface based on a polydopamine-cotton (PDA-Cel) composite hosted inside the inner diameter of a 14-gauge blunt needle to determine oxycodone and naloxone in saliva samples. The needle is used as a microextraction device and a substrate for mass spectrometric analysis. The lack of sharpness of the 14-gauge (14G) blunt needles challenges the formation of the electrospray (ESI), and a commercial 10 μL pipette tip is proposed as a simple solution to this shortcoming. Under the optimum parameters, the proposed method was validated, obtaining limits of detection lower than 0.6 μg L, linear range up to 200 μg L, and linearity better than 0.9915. Relative standard deviation (RSD) and relative recoveries (RR) were studied at three different concentration levels (2, 40, and 200 μg L). RSD values were better than 20.7 %, and RR ranged from 90 to 114 %. Finally, a positive sample from a patient under medical treatment was analyzed.
SIGNIFICANCE AND NOVELTY
14G blunt needles have been demonstrated as effective extraction devices due to their low price (<0.15 € per extraction unit), their better safety (avoiding finger pricking), and their higher hosting capacity (up to 8 mg of sorbent). The conductivity of stainless steel permits their use as electrospray emitters, making their direct combination to MS easier. The large variety of fibrous sorbents makes this approach versatile enough to be adapted to other analytical problems.
Topics: Humans; Oxycodone; Naloxone; Saliva; Analgesics, Opioid; Mass Spectrometry
PubMed: 38438230
DOI: 10.1016/j.aca.2024.342376 -
Human Reproduction (Oxford, England) May 2024Is there a cumulative toxicity of disposables used in IVF procedures? (Observational Study)
Observational Study
STUDY QUESTION
Is there a cumulative toxicity of disposables used in IVF procedures?
SUMMARY ANSWER
A toxicity may be detected when consumables are used cumulatively, while no toxicity is detected when the same consumables are used and tested individually.
WHAT IS KNOWN ALREADY
Many components of items used in IVF laboratories may impair human embryonic development. Consequently, it is necessary to screen all reagents and materials which could be in contact with gametes and embryos. Toxicity tests, such as the mouse embryo assay and the human sperm motility assay (HSMA), are used by manufacturers as quality control tools to demonstrate the safety of their products. This evaluation is currently individually performed for each single consumable. However, during an IVF cycle, several devices are used sequentially, potentially creating a cumulative exposure to chemical contaminants, which could not be detected for individually tested consumables.
STUDY DESIGN, SIZE, DURATION
The objective of this observational study conducted from March 2021 to October 2022 was to evaluate with the HSMA methodology if there was a cumulative toxicity when several disposables are sequentially used. Fourteen categories of consumables currently used in routine IVF procedures were studied, which included devices used for sperm and oocyte collection (cups, condoms, and oocyte aspiration needles), manipulation (flasks, tubes, tips, pipettes, embryo transfer catheters, syringes, and gloves), culture (dishes), and storage (straws).
PARTICIPANTS/MATERIALS, SETTING, METHODS
After obtaining patient consent, the surplus semen assessed as having normal parameters according to the World Health Organization 2010 criteria were used to perform the HSMAs. First, each consumable was tested individually. Then, associations of three, four, and five consumables, previously validated as non-toxic when tested individually, were analyzed. HSMAs were conducted three times to ensure reproducibility, with a defined toxicity threshold of a sperm motility index (SMI) below 0.85 in at least two of three tests.
MAIN RESULTS AND THE ROLE OF CHANCE
Thirty-six references of disposables were first individually tested across 53 lots. Forty-nine (92%) demonstrated compliance. However, four (8%) devices revealed toxicity: one lot of 1 ml syringes, two lots of sperm cups, and one lot of 25 cm2 flasks. These four references were excluded from the IVF routine procedures. A total of 48 combinations of consumables were assessed, involving 41 lots from 32 references that were previously individually tested. Among the evaluated combinations, 17 out of 48 (35%) associations exhibited toxicity with a SMI below 0.85 for two of the three tests (n = 8) or all the three tests (n = 9). Notably, three out of 17 (18%) of the three-consumable associations, five out of 16 (31%) of the four-consumable associations, and nine out of 15 (60%) of the five-consumable associations were found not compliant. The toxicity did not originate from a single consumable, because only consumables that were individually pre-validated as non-toxic were included in the combinations, but the toxicity had a cumulative origin. The risk of cumulative toxicity increased with the number of consumables included in the association (Cochran-Mantel-Haenszel statistic, P = 0.013).
LIMITATIONS, REASONS FOR CAUTION
The high proportion of non-compliant combinations of disposables can be attributed directly to the extreme rigorous extraction conditions employed during the tests, which could deviate from the conditions encountered in routine clinical use. Also, the methodology employed in the HSMAs (e.g. toxicity extraction duration, sperm concentrations, and protein supplementation of the medium) can influence the sensitivity of the tests.
WIDER IMPLICATIONS OF THE FINDINGS
This study highlights the significance of performing toxicity testing on devices before introducing them into clinical practice. Disposables should be tested individually to detect immediate toxicities and also in combination. Our results advocate rationalizing the number of consumables used in each IVF procedure and re-evaluating the use of glass consumables.
STUDY FUNDING/COMPETING INTEREST(S)
This study received fundings from GCS Ramsay Santé pour l'Enseignement et la Recherche (Paris, France) and the Centre de Biologie Médicale BIOGROUP (Le Chesnay-Rocquencourt, France). The authors declare that they have no conflict of interest that could be perceived as prejudicing the impartiality of the reported research.
TRIAL REGISTRATION NUMBER
N/A.
Topics: Humans; Fertilization in Vitro; Male; Female; Sperm Motility; Mice; Animals; Toxicity Tests; Embryonic Development; Spermatozoa
PubMed: 38438162
DOI: 10.1093/humrep/deae028 -
Veterinary World Jan 2024The production of lignocellulosic biomass waste in the agricultural sector of Indonesia is quite high annually. Utilization of lignocellulosic biomass waste through...
BACKGROUND AND AIM
The production of lignocellulosic biomass waste in the agricultural sector of Indonesia is quite high annually. Utilization of lignocellulosic biomass waste through fermentation technology can be used as feed and biofuel. Fermentation technology requires the involvement of micro-organisms such as bacteria (lactic acid bacteria or LAB). LABs can be isolated from various sources, such as duck excreta. However, there have not been many reports of LAB from duck excreta. The present study aimed to characterize LAB enzymes isolated from duck excreta and obtain LAB enzymes with superior fermentation properties.
MATERIALS AND METHODS
A total of 11 LAB cultures obtained from duck excreta in Yogyakarta, Indonesia, were tested. Enzyme characterization of each LAB was performed using the API ZYM kit (BioMérieux, Marcy-I'Etoile, France). The bacterial cell suspension was dropped onto the API ZYM™ cupule using a pipette and incubated for 4 h at 37°C. After incubation, ZYM A and ZYM B were dripped onto the API ZYM cupule, and color changes were observed for approximately 10 s under a strong light source.
RESULTS
Esterase activity was moderate for all LABs. The activity of α-chymotrypsin, β-glucuronidase, α-fucosidase, and α-mannosidase was not observed in a total of 10 LAB. The phosphohydrolase and amino peptidase enzyme activity of seven LABs was strong. Only six LAB samples showed protease activity. The glycosyl hydrolase (GH) activity was observed in a total of 8 LAB, while the activity of 2 LAB was strong ( subsp. K5 and M4A).
CONCLUSION
A total of 2 LABs have superior properties. subsp. K5 and M4A have a high potential to be used in fermentation. They have the potential for further research, such as their effectiveness in fermentation, lignocellulose hydrolysis, feed additives, molecular characterization to detect specific enzymes, and their specific activities.
PubMed: 38406367
DOI: 10.14202/vetworld.2024.143-149 -
Proceedings. Biological Sciences Feb 2024Sabotaging milkweed by monarch caterpillars () is a famous textbook example of disarming plant defence. By severing leaf veins, monarchs are thought to prevent the flow...
Sabotaging milkweed by monarch caterpillars () is a famous textbook example of disarming plant defence. By severing leaf veins, monarchs are thought to prevent the flow of toxic latex to their feeding site. Here, we show that sabotaging by monarch caterpillars is not only an avoidance strategy. While young caterpillars appear to avoid latex, late-instar caterpillars actively ingest exuding latex, presumably to increase sequestration of cardenolides used for defence against predators. Comparisons with caterpillars of the related but non-sequestering common crow butterfly () revealed three lines of evidence supporting our hypothesis. First, monarch caterpillars sabotage inconsistently and therefore the behaviour is not obligatory to feed on milkweed, whereas sabotaging precedes each feeding event in caterpillars. Second, monarch caterpillars shift their behaviour from latex avoidance in younger to eager drinking in later stages, whereas caterpillars consistently avoid latex and spit it out during sabotaging. Third, monarchs reared on detached leaves without latex sequestered more cardenolides when caterpillars imbibed latex offered with a pipette. Thus, we conclude that monarch caterpillars have transformed the ancestral 'sabotage to avoid' strategy into a 'sabotage to consume' strategy, implying a novel behavioural adaptation to increase sequestration of cardenolides for defence.
Topics: Animals; Larva; Latex; Butterflies; Asclepias; Cardenolides
PubMed: 38378155
DOI: 10.1098/rspb.2023.2721 -
BMC Pediatrics Feb 2024Neonatal jaundice is a condition caused by elevated levels of bilirubin in the bloodstream. Laboratory determination of serum bilirubin concentration by total serum... (Observational Study)
Observational Study
BACKGROUND
Neonatal jaundice is a condition caused by elevated levels of bilirubin in the bloodstream. Laboratory determination of serum bilirubin concentration by total serum bilirubin (TSB) test is still considered as gold standard for clinical guidance and practice. In developed countries, diagnosis of neonatal jaundice is shifting towards point-of-care medical devices. BiliDx is a device developed to allow a fast, blood-based determination of bilirubin levels at the point of care. This study aimed to determine the accuracy of the BiliDx device relative to a standard laboratory total serum bilirubin to diagnose and monitor jaundice among neonates admitted at Muhimbili National Hospital (MNH).
MATERIAL AND METHODOLOGY
This was a prospective hospital-based observational study conducted at the Neonatal Ward - MNH, Dar-es-Salaam, Tanzania from November 2022 to January 2023. A total of 180 neonates admitted at the neonatal ward with jaundice and whose parents consented were enrolled in the study. Blood samples were collected; 2 ml of venous blood into the vacutainer bottle for standard laboratory measurement of total serum bilirubin (TSB) and 25µL blood collected into a transfer pipette tube and applied to BiliDx. STATA version 15.1 was used for data analysis.
RESULTS
Out of 180 neonates, 39.4% (71/180) had birth weight between 1500 - 2499.9 g, approximately 2/3rd (120/180) were preterm, 92/180 (51.1%) were males and 100/180 (55.6%) were undergoing phototherapy treatment the moment sample taken. The mean bilirubin concentration was 92 mmol/l for BiliDx and 118 mmol/l for standard laboratory TSB. The minimum and maximum values obtained with BiliDx were, 3.4 and 427.5 mmol/l respectively, compared with 10.7 and 382.1 mmol/l using standard laboratory TSB. A linear relationship and correlation coefficient of 0.8408 (p = 0.000) between BiliDx and standard laboratory TSB was found. The regression analysis showed the presence of constant error [coefficient of BiliDx/slope = 0.91, 95% CI (0.82-0.99), p = 0.000] and random error exclusively [coefficient of constant/y-intercept = 48.52, 95%CI (37.70-59.34), p = 0.000]. The Bland-Altman plot showed an acceptable mean difference of 39.1mmol/l, limits of agreement of -48.3mmol/l to 126.4mmol/l, and 179 points (179/180 = 99.4%) lying inside the limits of agreement.
CONCLUSION
The results support the use of BiliDx for rapid and accurate testing of elevated levels of bilirubin in the bloodstream among neonates since 99.4% of the differences between BiliDx and standard laboratory TSB lie between the lines of agreement.
Topics: Infant, Newborn; Male; Humans; Female; Jaundice, Neonatal; Bilirubin; Point-of-Care Systems; Prospective Studies; Jaundice; Phototherapy; Hospitals; Neonatal Screening
PubMed: 38350890
DOI: 10.1186/s12887-024-04565-w -
Asian Journal of Andrology Feb 2024Ex vivo tissue culture of the human corpus cavernosum (CC) can be used to explore the tissue structural changes and complex signaling networks. At present, artificial...
Ex vivo tissue culture of the human corpus cavernosum (CC) can be used to explore the tissue structural changes and complex signaling networks. At present, artificial CC-like tissues based on acellular or three-dimensional (3D)-printed scaffolds are used to solve the scarcity of primary penis tissue samples. However, inconvenience and high costs limit the wide application of such methods. Here, we describe a simple, fast, and economical method of constructing artificial CC-like tissue. Human CC fibroblasts (FBs), endothelial cells (ECs), and smooth muscle cells (SMCs) were expanded in vitro and mixed with Matrigel in specific proportions. A large number of bubbles were formed in the mixture by vortexing combined with pipette blowing, creating a porous, spongy, and spatial structure. The CC FBs produced a variety of signaling factors, showed multidirectional differentiation potential, and grew in a 3D grid in Matrigel, which is necessary for CC-like tissue to maintain a porous structure as a cell scaffold. Within the CC-like tissue, ECs covered the surface of the lumen, and SMCs were located inside the trabeculae, similar to the structure of the primary CC. Various cell components remained stable for 3 days in vitro, but the EC content decreased on the 7th day. Wingless/integrated (WNT) signaling activation led to lumen atrophy and increased tissue fibrosis in CC-like tissue, inducing the same changes in characteristics as in the primary CC. This study describes a preparation method for human artificial CC-like tissue that may provide an improved experimental platform for exploring the function and structure of the CC and conducting drug screening for erectile dysfunction therapy.
PubMed: 38319194
DOI: 10.4103/aja202374 -
ACS Omega Jan 2024The ability of the centrifugal Lab-on-a-Disc (LoaD) platform to closely mimic the "on bench" liquid handling steps (laboratory unit operations (LUOs)) such as metering,...
Low-High-Low Rotationally Pulse-Actuated Serial Dissolvable Film Valves Applied to Solid Phase Extraction and LAMP Isothermal Amplification for Plant Pathogen Detection on a Lab-on-a-Disc.
The ability of the centrifugal Lab-on-a-Disc (LoaD) platform to closely mimic the "on bench" liquid handling steps (laboratory unit operations (LUOs)) such as metering, mixing, and aliquoting supports on-disc automation of bioassay without the need for extensive biological optimization. Thus, well-established bioassays, normally conducted manually using pipettes or using liquid handling robots, can be relatively easily automated in self-contained microfluidic chips suitable for use in point-of-care or point-of-use settings. The LoaD's ease of automation is largely dependent on valves that can control liquid movement on the rotating disc. The optimum valving strategy for a true low-cost and portable device is rotationally actuated valves, which are actuated by changes in the disc spin-speed. However, due to tolerances in disc manufacturing and variations in reagent properties, most of these valving technologies have inherent variation in their actuation spin-speed. Most valves are actuated through stepped increases in disc spin-speed until the motor reaches its maximum speed (rarely more than 6000 rpm). These manufacturing tolerances combined with this "analogue" mechanism of valve actuation limits the number of LUOs that can be placed on-disc. In this work, we present a novel valving mechanism called low-high-low serial dissolvable film (DF) valves. In these valves, a DF membrane is placed in a dead-end pneumatic chamber. Below an actuation spin-speed, the trapped air prevents liquid wetting and dissolving the membrane. Above this spin-speed, the liquid will enter and wet the DF and open the valve. However, as DFs take ∼40 s to dissolve, the membrane can be wetted, and the disc spin-speed reduced before the film opens. Thus, by placing valves in a series, we can govern on which "digital pulse" in spin-speeding a reagent is released; a reservoir with one serial valve will open on the first pulse, a reservoir with two serial valves on the second, and so on. This "digital" flow control mechanism allows the automation of complex assays with high reliability. In this work, we first describe the operation of the valves, outline the theoretical basis for their operation, and support this analysis with an experiment. Next, we demonstrate how these valves can be used to automate the solid-phase extraction of DNA on on-disc LAMP amplification for applications in plant pathogen detection. The disc was successfully used to extract and detect, from a sample lysed off-disc, DNA indicating the presence of thermally inactivated , a bacterial pathogen on tomato leaf samples.
PubMed: 38284094
DOI: 10.1021/acsomega.3c05117