-
Applications of artificial intelligence for surgical extraction in stomatology: a systematic review.Oral Surgery, Oral Medicine, Oral... May 2024Artificial intelligence (AI) has been extensively used in the field of stomatology over the past several years. This study aimed to evaluate the effectiveness of... (Review)
Review
OBJECTIVES
Artificial intelligence (AI) has been extensively used in the field of stomatology over the past several years. This study aimed to evaluate the effectiveness of AI-based models in the procedure, assessment, and treatment planning of surgical extraction.
STUDY DESIGN
Following Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines, a comprehensive search was conducted on the Web of Science, PubMed/MEDLINE, Embase, and Scopus databases, covering English publications up to September 2023. Two reviewers performed the study selection and data extraction independently. Only original research studies utilizing AI in surgical extraction of stomatology were included. The Cochrane risk of bias tool for randomized trials (RoB 2) was selected to perform the quality assessment of the selected literature.
RESULTS
From 2,336 retrieved references, 35 studies were deemed eligible. Among them, 28 researchers reported the pioneering role of AI in segmentation, classification, and detection, aligning with clinical needs. In addition, another 7 studies suggested promising results in tooth extraction decision-making, but further model refinement and validation were required.
CONCLUSIONS
Integration of AI in stomatology surgical extraction has significantly progressed, enhancing decision-making accuracy. Combining and comparing algorithmic outcomes across studies is essential for determining optimal clinical applications in the future.
PubMed: 38834501
DOI: 10.1016/j.oooo.2024.05.002 -
Journal of Oral Biology and... 2024Application of alveolar bone graft (ABG) in alveolar augmentation is done to prevent excessive bone resorption due to tooth extraction, missing teeth, or other... (Review)
Review
INTRODUCTION
Application of alveolar bone graft (ABG) in alveolar augmentation is done to prevent excessive bone resorption due to tooth extraction, missing teeth, or other diseases/conditions affecting the alveolar bone. The use of autogenous dentin-derived ABG has been considered as the composition of dentin appears to be nearly analogous to that of bone.
OBJECTIVE
This systematic review aims to assess the efficacy of dentin-derived ABG for alveolar augmentation of post-extraction sockets or other alveolar bone defects by evaluating volume gain and histomorphometric data.
MATERIAL AND METHODS
A search of systematic literature was conducted in Pubmed, Scopus, Web of Science, and Embase from database inception to October 2023. The review included both randomized controlled trials (RCT), pilot studies, clinical trials, and retrospective studies reporting on dentin-derived ABG use for alveolar augmentation.
RESULTS
Overall, 298 articles were obtained from the initial search. From these articles, 21 articles met the inclusion criteria and were included for descriptive analysis. All of the studies indicated low risk of bias. Studies of dentin-derived ABG, which used bone-derived grafts as the control group, have shown significantly higher percentages of new bone formation, gain in vertical and horizontal dimensions, and less reduction in dimensions.
CONCLUSIONS
Dentin-derived ABG was effective in volume maintenance, indicating promising results via histomorphometric and radiographic analysis.
PubMed: 38832290
DOI: 10.1016/j.jobcr.2024.05.005 -
International Journal of Dental Hygiene Jun 2024Professional oral hygiene is essential to prevent peri-implant disease. Appropriate instruments should be employed for implant-supported restorations: they should... (Review)
Review
OBJECTIVES
Professional oral hygiene is essential to prevent peri-implant disease. Appropriate instruments should be employed for implant-supported restorations: they should effectively remove deposits without damaging dental implant surface. The aim of the present systematic review is to investigate the efficacy and safety of erythritol air-polishing in implant-supported rehabilitations, compared to alternative hygienic techniques.
MATERIALS AND METHODS
The guidelines reported in the indications of the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) were employed for this systematic review. The focused question was: 'what is the effect of erythritol air-polishing on dental implant surfaces regarding its cleansing efficacy and/or safety?' The final online search was conducted on 13 August 2023; MEDLINE-PubMed, Scopus and Cochrane Library were employed. Comparative in vitro or in vivo original studies were included.
RESULTS
The initial database search yielded 128 entries; the final selection comprised 15 articles. The risk of bias was evaluated using the Newcastle Ottawa scale (NOS), the Cochrane Handbook for Systematic Reviews of Interventions, GRADE method. Ultrasonic scaling with PEEK tips, glycine air-polishing and cold atmospheric plasma were the devices most frequently compared to erythritol powder in the included studies. Erythritol air-polishing appeared to be significantly more effective in reducing biofilm compared to other treatments, without causing any significant damage to the implant surface and peri-implant tissues, promoting a good biological response.
CONCLUSION
Erythritol air-polishing showed promising results for professional oral hygiene in implant-supported restorations. According to this systematic review, it is effective and safe for removing biofilm from titanium dental implants.
PubMed: 38825804
DOI: 10.1111/idh.12836 -
The Journal of Evidence-based Dental... Jun 2024Schiegnitz E, Reinicke K, Sagheb K, König J, Al-Nawas B, Grötz KA. Dental implants in patients with head and neck cancer-A systematic review and meta-analysis of the... (Meta-Analysis)
Meta-Analysis
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION
Schiegnitz E, Reinicke K, Sagheb K, König J, Al-Nawas B, Grötz KA. Dental implants in patients with head and neck cancer-A systematic review and meta-analysis of the influence of radiotherapy on implant survival. Clinical oral implants research. 2022 Oct;33(10):967-99.
SOURCE OF FUNDING
Open access funding enabled by Project DEAL.
TYPE OF STUDY/DESIGN
Systematic review with meta-analysis of data (SRMA).
Topics: Humans; Head and Neck Neoplasms; Dental Implants; Dental Implantation, Endosseous
PubMed: 38821653
DOI: 10.1016/j.jebdp.2023.101967 -
The International Journal of... Feb 2024The purpose of this systematic review and meta-analysis was to compare the influence of fabrication method (conventional, subtractive, and additive procedures) and... (Meta-Analysis)
Meta-Analysis
Influence of the Manufacturing Trinomial (Technology, Printer, and Material) on the Marginal and Internal Discrepancies of Printed Metal Frameworks for the Fabrication of Tooth-Supported Prostheses: A Systematic Review and Meta-analysis.
PURPOSE
The purpose of this systematic review and meta-analysis was to compare the influence of fabrication method (conventional, subtractive, and additive procedures) and manufacturing trinomial (technology, printer, and material combination) on the marginal and internal fit of cobaltchromium (Co-Cr) tooth-supported frameworks.
MATERIALS AND METHODS
An electronic systematic review was performed in five data bases: MEDLINE/PubMed, Embase, World of Science, Cochrane, and Scopus. Studies that reported the marginal and internal discrepancies of tooth-supported Co-Cr additive manufacturing (AM) frameworks were included. Two authors independently completed the quality assessment of the studies by applying the Joanna Briggs Institute Critical Appraisal Checklist for Quasi-Experimental Studies. A third examiner was consulted to resolve lack of consensus.
RESULTS
A total of 31 articles were included and classified based on the evaluation method: manufacturing accuracy, the dual- or triple-scan method, stereomicroscope, optical coordinate measurement machine, microCT, profilometer, and silicone replica. Six subgroups were created: 3D Systems, Bego, Concept Laser, EOS, Kulzer, and Sisma. Due to the heterogeneity and limited data available, only the silicone replica group was considered for meta-analysis. The metaanalysis showed a mean marginal discrepancy of 91.09 μm (I2 = 95%, P < .001) in the conventional group, 77.48 μm (I2 = 99%, P < .001) in the milling group, and 82.92 μm (I2 = 98%, P < .001) in the printing group. Additionally, a mean internal discrepancy of 111.29 μm (I2 = 94%, P < .001) was obtained in the conventional casting group, 121.96 μm (I2 = 100%, P < .001) in the milling group, and 121.25 μm (I2 = 99%, P < .001) in the printing group.
CONCLUSIONS
Manufacturing method and selective laser melting (SLM) metal manufacturing trinomial did not impact the marginal and internal discrepancies of Co-Cr frameworks for the fabrication of tooth-supported restorations.
Topics: Humans; Computer-Aided Design; Chromium Alloys; Dental Marginal Adaptation; Printing, Three-Dimensional; Denture Design; Dental Prosthesis Design; Technology, Dental; Dental Materials
PubMed: 38819942
DOI: 10.11607/ijp.8830 -
International Journal of Implant... May 2024The rise of stereolithographic surgical guides and digital workflow, combined with a better knowledge of materials and loading principle, has enabled the placement of... (Review)
Review
PURPOSE
The rise of stereolithographic surgical guides and digital workflow, combined with a better knowledge of materials and loading principle, has enabled the placement of the temporary prosthesis at the time of implant placement. This scoping review aimed to assess the current knowledge available on stackable guides.
METHODS
The review focused on fully edentulous or requiring total edentulism patients. The procedure studied was the use of stackable guides for edentulous patients in order to place immediate temporary prostheses. The clinical endpoint was immediate placement of the provisional prosthesis after surgery combined with a prior bone reduction using a stackable guide.
RESULTS
12 case reports or case series articles met inclusion criteria, which did not allow an analysis by a systematic review. The included studies were case reports or case series. Most of the articles showed a base stabilized by 3 or 4 bone-pins, anchored in buccal or lingual part. Regarding the accuracy of bone reduction (ranged from 0.0248 mm to 1.98 mm) and implant placement when compared to planned, only 4 articles reported quantitative data. 11 articles showed an immediate loading with the transitional prosthesis after implant placement.
CONCLUSIONS
There are as yet no prospective or comparative studies on the efficiency of this technique. In a reliable way, stackable guides seem to be able to guide the practitioner from the flap elevation to the placement of the temporary screw-retained implant supported prosthesis. Given the lack of studies in this specific field of guided surgery, further studies are needed to confirm the clinical relevance of this technique.
Topics: Humans; Dental Implantation, Endosseous; Surgery, Computer-Assisted; Immediate Dental Implant Loading; Mouth, Edentulous
PubMed: 38819752
DOI: 10.1186/s40729-024-00547-w -
Current Pharmaceutical Biotechnology May 2024This systematic review aimed to summarize the currently available evidence on the effect of oral probiotic therapy on infected wound healing among patients who underwent...
INTRODUCTION
This systematic review aimed to summarize the currently available evidence on the effect of oral probiotic therapy on infected wound healing among patients who underwent surgery.
MATERIALS AND METHODS
An electronic search was conducted for articles published during 2010- 2022 in Embase, PubMed/Medline, Scopus, Web of Science, and Google Scholar using the keywords "probiotics," "prebiotics," "synbiotics," and "wound infection." The titles and abstracts of 2625 articles were screened, and 22 publications that fulfilled the inclusion criteria were included.
RESULTS
The current review provides evidence of the beneficial effects of probiotics on wound infection, significantly reducing the duration of antibiotic usage and the length of hospital stay for patients, with no serious side effects reported. Wound infections following various surgeries, such as abdominal wound surgery, colorectal cancer resection, periampullary neoplasms treatment, liver and bile duct resection, pancreaticoduodenectomy, esophagostomy, dental wound surgery, plastic surgery, and burns, are shown to be positively affected by probiotic usage. Although, in some cases, the improvements were not statistically significant, overall, the administration of probiotics appears to be satisfactory in this regard.
CONCLUSION
Probiotics demonstrate the ability to prevent the growth of pathogens and maintain wound space sterility by recruiting M2 macrophages, which produce anti-inflammatory markers and enhance the activity of phagocytic cells. Additionally, probiotics can reduce bacterial translocation from their niche to other areas and inhibit the production of bacterial mediators that lead to bacterial invasion.
PubMed: 38818910
DOI: 10.2174/0113892010279946240507115337 -
Frontiers in Oral Health 2024Digital denture fabrication became an alternative method to conventional denture fabrication. However reviewing the antimicrobial performance of newly introduced digital...
OBJECTIVES
Digital denture fabrication became an alternative method to conventional denture fabrication. However reviewing the antimicrobial performance of newly introduced digital fabrication methods in comparison to the conventional method is neglected. Aim of study: this review was to compare the antiadherence properties of various CAD-CAM subtractive (milled), additive (3D printed) conventional denture base resins. In order to answer the developed PICO question: "Does CAD-CAM milled and 3D printed denture base resins have microbiological antiadherence properties over the conventional ones?" We included comparative studies on digitally fabricated Denture base resins with conventionally fabricated one in term of microbial adhesion.
METHODS
All studies investigated the microbial adherence to CAD-CAM milled and 3D printed denture base resins in comparison to conventional were searched in the PubMed, Web of Sciences, and Scopus databases up to December 2023.
RESULTS
Fifteen studies have been investigated the microbial adhesion to milled and 3D printed denture base resins. CAD-CAM milled resins significantly decreased the microbial adhesion when compared with the conventional resins and 3D printed resins, while the later showed a high tendency for microbial adhesion. The addition of antifungal agents to 3D printed resins significantly reduced adhesion. In terms of 3D printing parameters, printing orientation affected adherence while printing technology had no effect on microbial adhesion.
CONCLUSION
Denture base materials and fabrication methods significantly affect the microbial adhesion. CAD-CAM milled denture base resins demonstrated low microbial adhesion. 3D-printed resins showed high tendency for adhesion. The antiadherent properties of 3D-printed resins can be improved by incorporating antifungal agents or changing the printing parameters, but further investigations are required to validate these modifications.
PubMed: 38817845
DOI: 10.3389/froh.2024.1375186 -
Future Science OA 2024This meta-analysis aims to shed light on any primacy the -carotid (TC-TAVR) access may have over the -femoral access (TF-TAVR) for those undergoing transcatheter aortic... (Review)
Review
This meta-analysis aims to shed light on any primacy the -carotid (TC-TAVR) access may have over the -femoral access (TF-TAVR) for those undergoing transcatheter aortic valve replacement (TAVR). PubMed/MEDLINE and Cochrane Library were searched, from inception to March 2023 retrieving seven adjusted studies with a total of 6609 patients, of which 5048 underwent TF-TAVR while 1561 underwent TC-TAVR. No divergence in risk of mortality, major bleeding or stroke/transient ischemic attack in TC-TAVR when compared with TF-TAVR was found. In TC-TAVR, the risk of vascular complications was low (OR: 0.51, 95% CI: 0.32-0.83, p = 0.003) as compared with TF-TAVR. As of this analysis, the viability of TC-TAVR as first alternative to TF-TAVR is plausible.
PubMed: 38817364
DOI: 10.2144/fsoa-2023-0101 -
Oral Diseases May 2024The incidence of oral cancer is significantly high in South Asia and Southeast Asia. Organized screening is an effective approach to early detection. The aim of this... (Review)
Review
OBJECTIVES
The incidence of oral cancer is significantly high in South Asia and Southeast Asia. Organized screening is an effective approach to early detection. The aim of this systematic review and meta-analysis was to evaluate the reliability, diagnostic accuracy, and effectiveness of visual oral screening by community health workers (CHWs) in identifying oral cancer/oral potentially malignant disorders (OPMDs) in this region.
MATERIALS AND METHODS
We conducted a bibliographic search in PubMed, Scopus, the gray literature of Google Scholar, ProQuest dissertations, and additional manual searches. Twelve articles were included for qualitative synthesis and six for meta-analysis. Pooled sensitivity, specificity, diagnostic odds ratio (DOR), and forest plot analysis were performed.
RESULTS
Meta-analysis showed CHWs identified 8% (n = 6365) as suspicious and 92% (n = 74,140) as normal. The diagnostic accuracy of visual oral screening by CHWs showed a sensitivity of 75% (CI: 74-76) and specificity of 97% (CI: 97-97) in the detection of OPMDs/oral cancer. Forest plots were obtained using a random effects model (DOR: 24.52 (CI: 22.65-26.55)) and SAUC: 0.96 (SE = 0.05).
CONCLUSIONS
Oral visual examination by trained CHWs can be utilized for community screenings to detect oral cancer early. This approach can be used in primary healthcare to triage patients for further referral and management.
PubMed: 38817091
DOI: 10.1111/odi.15001