-
Oral and Maxillofacial Surgery May 2024This study aimed to investigate the viability of free gingival grafts (FGG) and assess clinical and radiographic changes in the alveolar ridge following socket seal...
PURPOSE
This study aimed to investigate the viability of free gingival grafts (FGG) and assess clinical and radiographic changes in the alveolar ridge following socket seal surgery with or without freeze-dried bone allograft (FDBA).
MATERIALS AND METHODS
Twenty-eight anterior and premolar tooth extractions were randomly allocated to 2 groups: socket graft of FDBA sealed with FGG (n = 15) and control with empty sockets sealed solely with FGG (n = 13). Photographs taken at 3, 7, 14, and 30 days post-surgery assessed FGG viability. Alveolar ridge volume was clinically evaluated via intraoral scanners before surgery and at 1 and 3 months post-surgery. CBCT scans taken immediately post-surgery and 3 months later assessed alveolar ridge dimensions.
RESULTS
FGG viability in both groups increased from day 3 and reached the maximum score on day 14. Alveolar ridge volume reduction at 3 months in the FDBA group was comparable to the control group. Buccal alveolar bone height reduction was significantly higher in the FDBA group than the control group, while palatal alveolar bone height was comparable. Alveolar bone width reduction was evident but not statistically significant between the groups. The FDBA group exhibited a significant alteration in bone volume compared to the control group.
CONCLUSION
Viability of FGG was not affected by graft filling materials. Sealing the socket with FGG effectively preserved socket integrity and ridge volume in minor socket defects using either graft filling material or not. This study was registered on 4 January 2021 on Thai Clinical Trials Registry (TCTR20210104001).
PubMed: 38789863
DOI: 10.1007/s10006-024-01262-x -
The International Journal of... May 2024This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets....
This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.
Topics: Humans; Tooth Socket; Pilot Projects; Alveolar Ridge Augmentation; Synchrotrons; Cone-Beam Computed Tomography; Middle Aged; Male; Female; Tooth Extraction; Dental Implantation, Endosseous; Adult; Bone Substitutes; Aged; Collagen
PubMed: 38787708
DOI: 10.11607/prd.6468 -
Dentistry Journal Apr 2024Autotransplantation is a successful technique to replace compromised teeth. This study presents a computer-guided surgical approach for preparing the receiving socket...
Autotransplantation is a successful technique to replace compromised teeth. This study presents a computer-guided surgical approach for preparing the receiving socket for a mature mandibular third molar donor tooth with a wait-and-see approach instead of prophylactic endodontic treatment. A 42-year-old woman developed root resorption of tooth 3.7. Extraction of 3.7 and autotransplantation of 3.8 was planned, following a 6-week orthodontic phase for periodontal ligament activation and teeth mobilization. Due to the different root morphology between the compromised and donor teeth and the high mandibular bone density, the receiving socket preparation was performed using guided surgery templates. Two surgical splints were designed with a surgical planning software. Tooth 3.7 was extracted, the recipient site was guided-milled, and tooth 3.8 was transplanted into the new socket in approximately one second of extra-alveolar time. The rapidity of the extra-alveolar time facilitated complete healing without resorting to root canal treatment. Five-year radiological control does not show any periapical lesion or root resorption. The surgical procedure for tooth autotransplantation is fundamental: it must be as atraumatic as possible to preserve the periodontal ligament of the tooth and the receiving socket, and the dentist must minimize the extra-alveolar time. Guided surgery is a reliable solution to combine all these aspects.
PubMed: 38786522
DOI: 10.3390/dj12050124 -
Turkish Archives of Otorhinolaryngology Dec 2023Early surgical debridement is vital for favorable outcomes in acute invasive fungal sinusitis (AIFS). Our study aimed to propose guidelines with tailored, conservative...
OBJECTIVE
Early surgical debridement is vital for favorable outcomes in acute invasive fungal sinusitis (AIFS). Our study aimed to propose guidelines with tailored, conservative surgical procedures based on areas of involvement and evaluate their usefulness in avoiding repeated debridement.
METHODS
This retrospective observational study was conducted on 150 AIFS patients operated on with the proposed surgical guidelines from May to June 2021 at a tertiary care hospital. Data including demography, comorbidities, surgical procedures, revision surgery, and outcome were collected and analyzed.
RESULTS
All 150 patients underwent bilateral endoscopic sinonasal debridement. Among them, 108 patients (72%) had current or recent coronavirus disease (COVID) infection. Ninety-two patients (61.3%) required additional procedures based on disease extent. Twenty patients (15.4%) required revision debridement because of progressive or recurrent disease. Mean age of this group was 46.15 (standard deviation ±11.2) years with a strong male predominance (9:1). Seventeen had diabetes mellitus, 12 suffered from active COVID-19 infection and six had received corticosteroids. None of the 31 patients who had recovered from COVID-19 or had no comorbidities required revision surgery. Age, gender, and comorbidities were not significant predictors for revision surgery. Fourteen patients (70%) underwent second surgery within one month of primary surgery. Predominant disease locations were alveolus and palate (55% each), and in 80% the site was uninvolved at primary surgery. The most common revision procedure was inferior partial maxillectomy (60%). At follow-up, all were asymptomatic with no evidence of disease.
CONCLUSION
The proposed surgical guidelines for AIFS allow for adequate surgical debridement with preservation of optimum functional status. Low revision surgery rates and good outcomes with minimal morbidity validate its usefulness.
PubMed: 38784956
DOI: 10.4274/tao.2024.2023-10-4 -
European Journal of Oral Sciences May 2024Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies...
Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies have tried to simulate the biological characteristics of the healing process of loaded implants. This study used the rule of mixtures to simulate the biological healing process of immediate implants in an alveolus socket and bone-implant junction interface through FEA. Three-dimensional geometric models of the structures were obtained, and material properties were derived from the literature. The rule of mixtures was used to simulate the healing periods-immediate and early loading, in which the concentration of each cell type, based on in vivo studies, influenced the final elastic moduli. A 100 N occlusal load was simulated in axial and oblique directions. The models were evaluated for maximum and minimum principal strains, and the bone overload was assessed through Frost's mechanostat. There was a higher strain concentration in the healing regions and cortical bone tissue near the cervical portion. The bone overload was higher in the immediate load condition. The method used in this study may help to simulate the biological healing process and could be useful to relate FEA results to clinical practice.
PubMed: 38771146
DOI: 10.1111/eos.12992 -
Brazilian Oral Research 2024The aim of this systematic review was to answer the following question: "Does alendronate, a nitrogen-containing bisphosphonate, improve or impair alveolar socket...
The aim of this systematic review was to answer the following question: "Does alendronate, a nitrogen-containing bisphosphonate, improve or impair alveolar socket healing after tooth extraction in animal models"? To this end, a systematic review of the literature was carried out in PubMed, Scopus, LILACS, Web of Science, as well as in the gray literature up to May 2023. Preclinical studies that evaluated alveolar healing after tooth extraction and the intake of sodium alendronate compared with placebo were included. Two investigators were responsible for screening the articles independently, extracting the data, and assessing their quality through the SYRCLE's RoB tool for randomized trials in animal studies. The study selection process, study characteristics, risk of bias in studies, impact of alendronate on bone healing, and certainty of evidence were described in text and table formats. Methodological differences among the studies were restricted to the synthesis methods. The synthesis of qualitative results followed the Synthesis Without Meta-analysis (SWiM) reporting guideline. From the 19 included studies, five were considered to have low risk, three were of unclear risk, and eleven presented a high risk of bias. The studies were considered heterogeneous regarding alendronate posology, including its dosage and route of administration. Furthermore, a variety of animal species, different age ranges, diverse teeth extracted, and exposure or not to ovariectomy contributed to the lack of parity of the selected studies. Our results indicated that alendronate monotherapy negatively affects the early phase of wound healing after tooth extraction in preclinical studies, suggesting that the bone resorption process after tooth extraction in animals treated with alendronate might impair the bone healing process of the extraction socket. In conclusion, alendronate administration restrains bone resorption, thereby delaying alveolar socket healing . Future studies should be conducted to validate these findings and to better understand the effects of alendronate therapy on oral tissues.
Topics: Alendronate; Tooth Extraction; Animals; Wound Healing; Tooth Socket; Bone Density Conservation Agents
PubMed: 38747825
DOI: 10.1590/1807-3107bor-2024.vol38.0038 -
Journal of Applied Oral Science :... 2024Studies have highlighted numerous benefits of ozone therapy in the field of medicine and dentistry, including its antimicrobial efficacy against various pathogenic...
OBJECTIVE
Studies have highlighted numerous benefits of ozone therapy in the field of medicine and dentistry, including its antimicrobial efficacy against various pathogenic microorganisms, its ability to modulate the immune system effectively, reduce inflammation, prevent hypoxia, and support tissue regeneration. However, its effects on dental extraction healing remain to be elucidated. .Therefore, this study aimed to evaluate the effects of systemically administered ozone (O3) at different doses in the healing of dental extraction sockets in rats.
METHODOLOGY
To this end, 72 Wistar rats were randomly divided into four groups after extraction of the right upper central incisor: Group C - control, no systemic treatment; Group OZ0.3 - animals received a single dose of 0.3 mg/kg O3; Group OZ0.7 - a single dose of 0.7 mg/kg O3; and Group OZ1.0 - a single dose of 1.0 mg/kg O3, intraperitoneally. In total, six animals from each group were euthanized at 7, 14, and 21 days after the commencement of treatment. Bone samples were harvested and further analyzed by descriptive histology, histomorphometry, and immunohistochemistry for osteocalcin (OCN) and tartrate-resistant acid phosphatase (TRAP) protein expression.
RESULTS
All applied doses of O3 were shown to increase the percentage of bone tissue (PBT) after 21 days compared to group C. After 14 days, the OZ0.7 and OZ1.0 groups showed significantly higher PBT when compared to group C. The OZ1.0 group presented the most beneficial results regarding PBT among groups, which denotes a dose-dependent response. OCN immunostaining was higher in all groups at 21 days. However, after seven and 14 days, the OZ1.0 group showed a significant increase in OCN immunostaining compared to C group. No differences in TRAP+ osteoclasts were found between groups and time points.
CONCLUSION
Therefore, O3 therapy at higher doses might be beneficial for bone repair of the alveolar socket following tooth extraction.
Topics: Animals; Ozone; Rats, Wistar; Tooth Extraction; Tooth Socket; Wound Healing; Tartrate-Resistant Acid Phosphatase; Immunohistochemistry; Osteocalcin; Time Factors; Male; Random Allocation; Reproducibility of Results; Treatment Outcome; Reference Values
PubMed: 38747807
DOI: 10.1590/1678-7757-2023-0412 -
Clinical Oral Implants Research May 2024The aim of this retrospective clinical study was to compare the 5-year radiological and clinical outcomes of patients undergoing immediate implantation with or without...
AIMS
The aim of this retrospective clinical study was to compare the 5-year radiological and clinical outcomes of patients undergoing immediate implantation with or without the modified socket-shield technique.
MATERIALS AND METHODS
Patients who underwent anterior tooth replacement via the modified socket-shield technique (MSST) or the conventional immediate implantation technique (CIIT) between 2016 and 2017 were included. The labial bone thickness was assessed at different measurement levels (0, 2, 4 and 6 mm apical to the implant shoulder (IS)) postoperatively (T1), 6 months postoperatively (T2) and 5 years postoperatively (T3). The pink aesthetic score (PES) was evaluated before surgery (T0) and at T2 and T3. Implant success, complications and patient satisfaction were evaluated at every visit.
RESULTS
Thirty-six patients (18 in the MSST group) underwent follow-up for 5 years, with no cases of implant failure. Two cases of exposure were detected in the MSST group, but there were no significant effects on hard or soft tissue. Patients in the MSST group showed less and more stable bone resorption than did those in the CIIT group at any measurement level and any time. A higher PES was achieved in the MSST group. Patient satisfaction was similar in both groups.
CONCLUSIONS
The MSST is a reliable immediate implantation method because of its ability to preserve the alveolar bone and provide superior recovery of aesthetics.
PubMed: 38747494
DOI: 10.1111/clr.14281 -
Journal of Periodontology May 2024Bone readiness for implant placement is typically evaluated by bone quality/density on 2-dimensional radiographs and cone beam computed tomography at an arbitrary time...
BACKGROUND
Bone readiness for implant placement is typically evaluated by bone quality/density on 2-dimensional radiographs and cone beam computed tomography at an arbitrary time between 3 and 6 months after tooth extraction and alveolar ridge preservation (ARP). The aim of this study is to investigate if high-frequency ultrasound (US) can classify bone readiness in humans, using micro-CT as a reference standard to obtain bone mineral density (BMD) and bone volume fraction (BVTV) of healed sockets receiving ARP in humans.
METHODS
A total of 27 bone cores were harvested during the implant surgery from 24 patients who received prior extraction with ARP. US images were taken immediately before the implant surgery at a site co-registered with the tissue biopsy collection location, made possible with a specially designed guide, and then classified into 3 tiers using B-mode image criteria (1) favorable, (2) questionable, and (3) unfavorable. Bone mineral density (hydroxyapatite) and BVTV were obtained from micro-CT as the gold standard.
RESULTS
Hydroxyapatite and BVTV were evaluated within the projected US slice plane and thresholded to favorable (>2200 mg/cm; >0.45 mm/mm), questionable (1500-2200 mg/cm; 0.4-0.45 mm/mm), and unfavorable (<1500 mg/cm; <0.4 mm/mm). The present US B-mode classification inversely scales with BMD. Regression analysis showed a significant relation between US classification and BMD as well as BVTV. T-test analysis demonstrated a significant correlation between US reader scores and the gold standard. When comparing Tier 1 with the combination of Tier 2 and 3, US achieved a significant group differentiation relative to mean BMD (p = 0.004, true positive 66.7%, false positive 0%, true negative 100%, false negative 33.3%, specificity 100%, sensitivity 66.7%, receiver operating characteristics area under the curve 0.86). Similar results were found between US-derived tiers and BVTV.
CONCLUSION
Preliminary data suggest US could classify jawbone surface quality that correlates with BMD/BVTV and serve as the basis for future development of US-based socket healing evaluation after ARP.
PubMed: 38742564
DOI: 10.1002/JPER.23-0370 -
Cureus Apr 2024Solitary median maxillary central incisor (SMMCI) syndrome is complex and usually develops 35-38 days postconception during the intrauterine period. A noteworthy...
Solitary median maxillary central incisor (SMMCI) syndrome is complex and usually develops 35-38 days postconception during the intrauterine period. A noteworthy discovery is that just one central incisor in the maxillary alveolus, found exactly on the centerline, is present in both deciduous and permanent dentitions with other congenital anomalies. Around one in every 50,000 live babies exhibits this abnormality. This report describes the case of a 13-year-old female patient with SMMCI syndrome with a complaint about an unsightly appearance due to a single large upper front tooth. We underline the importance of increasing clinician awareness of SMMCI syndrome and the need for a multidisciplinary approach to its care.
PubMed: 38741811
DOI: 10.7759/cureus.58101