-
Journal of Pharmacy & Bioallied Sciences Feb 2024The study's objective was to assess the dimensional accuracy of hybrid polyether and polyvinyl siloxane materials for implant impressions.
AIM
The study's objective was to assess the dimensional accuracy of hybrid polyether and polyvinyl siloxane materials for implant impressions.
MATERIALS AND METHODS
Nine groups were created from 45 samples of various building materials and construction techniques from the study. Five samples were tested, and 45 impressions were recorded.
RESULTS
The hybrid non-splinted technique has improved implant site replication, accuracy, and low interimplant distance alterations.
CONCLUSION
The finest possible reproduction of implant sites on the master cast was made feasible by the use of an open, non-splinted method and a hybrid polyvinyl siloxane-polyether impression material.
PubMed: 38595438
DOI: 10.4103/jpbs.jpbs_886_23 -
Journal of Pharmacy & Bioallied Sciences Feb 2024Smart materials encompass a variety of substances, including smart antimicrobial peptides, pit and fissure sealants, impression materials, cement, and sutures. These... (Review)
Review
Smart materials encompass a variety of substances, including smart antimicrobial peptides, pit and fissure sealants, impression materials, cement, and sutures. These materials can change properties under specific stimuli such as temperature, stress, moisture, pH, or electric and magnetic fields. These constituents signify the commencement of a novel era or epoch in the field of smart dentistry and exhibit the potential for enhanced efficacy in the future.
PubMed: 38595377
DOI: 10.4103/jpbs.jpbs_550_23 -
Journal of Pharmacy & Bioallied Sciences Feb 2024The objectives of the current study was to evaluate the disinfection efficacy of ozone, ultraviolet (UV) radiation, herbal and glutaraldehyde method for sterilization of...
OBJECTIVES
The objectives of the current study was to evaluate the disinfection efficacy of ozone, ultraviolet (UV) radiation, herbal and glutaraldehyde method for sterilization of elastomeric impression materials.
MATERIALS AND METHODS
Disinfection of elastomeric impression material was performed with each of the disinfection methods: ozone, UV radiation, herbal, and glutaraldehyde. Later microbiological analysis was performed and the colony-forming units were evaluated and compared.
RESULTS
The highest disinfection efficacy was found with glutaraldehyde, followed by ozone and UV radiation, and the least with neem herbal rinse. Intergroup comparison was highly significant.
CONCLUSION
Dry gaseous ozone and UV radiation can be used effectively for the disinfection of impressions.
PubMed: 38595356
DOI: 10.4103/jpbs.jpbs_962_23 -
Journal of Prosthodontics : Official... Apr 2024To introduce a novel design for scan body accessory parts that are reusable, easy to attach and detach without permanent change of the scan body, and can be used with...
PURPOSE
To introduce a novel design for scan body accessory parts that are reusable, easy to attach and detach without permanent change of the scan body, and can be used with different inter-implant distances to enhance the accuracy of complete arch implant scans.
MATERIALS AND METHODS
A maxillary polymethylmethacrylate (PMMA) model with a soft tissue replica was fabricated with four implant analogs located at tooth positions 17, 13, 22, and 27 with 18, 25, and 30 mm inter-implant distances. Four scan bodies (SBs) were attached to the implants. The model was scanned with a laboratory scanner to be used as a reference scan. A total of 40 scans were made with the same intraoral scanner and they were divided equally into two groups. Group A: Complete arch implant scans without scan body accessories (n = 20), and Group B: Complete arch implant scans with scan body accessories (n = 20). Intraoral scans were exported and superimposed on the reference scan using reverse engineering inspection software to be evaluated for 3D deviations, angular deviations, and linear deviations. Statistical analysis was performed with student t-test and analysis of variance (ANOVA) with repeated measures followed by post hoc adjusted Bonferroni test. The level of significance was set at P = 0.05.
RESULTS
The scan body accessories decreased both the 3D and linear deviations, with a statistically significant difference at SB4 for the 3D deviation (P = 0.043) and the linear inter-implant discrepancies between SB1-SB2 and SB3-SB4 (P = 0.029 and < 0.001), respectively. However, there was no statistically significant difference in angular deviation between the study groups. Implant positions had significant differences within each group.
CONCLUSIONS
A significant improvement in the accuracy of the complete arch implant digital impression was achieved by using the scan body accessories, particularly in reducing the 3D and linear deviations at the most distant implant positions.
PubMed: 38594949
DOI: 10.1111/jopr.13856 -
BMC Oral Health Apr 2024The objective of the present study was to evaluate the reliability of an augmented reality drilling approach and a freehand drilling technique for the...
BACKGROUND
The objective of the present study was to evaluate the reliability of an augmented reality drilling approach and a freehand drilling technique for the autotransplantation of single-rooted teeth.
MATERIALS AND METHODS
Forty samples were assigned to the following surgical techniques for drilling guidance of the artificial sockets: A. augmented reality technique (AR) (n = 20) and B. conventional free-hand technique (FT) (n = 20). Then, two models with 10 teeth each were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan. Afterwards, the autotrasplanted teeth were planned in a 3D dental implant planning software and transferred to the augmented reality device. Then, a postoperative CBCT scan was performed. Data sets from postoperative CBCT scans were aligned to the planning in the 3D implant planning software to analize the coronal, apical and angular deviations. Student's t-test and Mann-Whitney non-parametric statistical analysis were used to analyze the results.
RESULTS
No statistically significant differences were shown at coronal (p = 0.123) and angular (p = 0.340) level; however, apical deviations between AR and FT study groups (p = 0.008) were statistically significant different.
CONCLUSION
The augmented reality appliance provides higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique.
Topics: Humans; Augmented Reality; Transplantation, Autologous; Reproducibility of Results; Computer-Aided Design; Surgery, Computer-Assisted; Cone-Beam Computed Tomography; Dental Implants; Imaging, Three-Dimensional
PubMed: 38575886
DOI: 10.1186/s12903-024-04173-1 -
The Journal of Prosthetic Dentistry Apr 2024High-quality impressions and accurate occlusal relationship records are essential for the success of complete dentures. A custom impression tray and interim complete...
High-quality impressions and accurate occlusal relationship records are essential for the success of complete dentures. A custom impression tray and interim complete denture base fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) are introduced, enhancing the ability to obtain precise definitive impressions and accurate jaw relation records and improving complete denture treatment.
PubMed: 38565439
DOI: 10.1016/j.prosdent.2024.03.009 -
Acta Stomatologica Croatica Mar 2024To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets:...
OBJECTIVES
To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets: ceramic brackets (Fascination Roth 0.22) and metallic brackets (Topic Roth 0.22, Dentaurum).
MATERIALS AND METHODS
The study was performed on 18 human teeth (6 for each adhesive). The prepared teeth were divided into three groups according to the examination time. Subsequently, they were observed after 1, 2 and 3 weeks following bonding. After the experimental procedure, the teeth samples were cut in half along the longitudinal axis in the vestibulo-oral direction, fixed with conductive carbon cement, placed in a high-vacuum evaporator and then coated with carbon. One half of each sample was observed under a Field-emission gun scanning electron microscope (FEG-SEM Hitachi SU 8030, Japan), while on the second half of the samples qualitative (X-ray line-scans) and semi-quantitative point X-ray energy dispersive analyses (EDX) were performed with Thermo Noran (USA) NSS System 7, equipped with Ultra Dry detector (30 mm window).
RESULTS
Transbond XT had an ideal bond with the enamel and the bracket base, with rare presence of microgaps and cracks in the enamel. Heliosit Orthodontic demonstrated a better bond relationship with the bracket base than the enamel, whereas in the latter the presence of microgaps in the bond was observed. The microphotographs of Fuji Ortho LC demonstrated many cracks inside the adhesive, and some of them continued to move forward into the enamel surface. Therefore, an impression of a very solid bond relationship with the enamel exists, with cracks being present in the enamel surface and never at the enamel-adhesive interface. Microgaps also appeared at the bracket-adhesive interface.
CONCLUSION
Transbond XT is a highly filled composite resin and is an ideal orthodontic adhesive in each aspect examined, with an ideal enamel-adhesive and bracket-adhesive interface. Heliosit Orthodontic provides better bracket-adhesive interface compared to the enamel. Fuji Ortho LC as a solid resin-modified GIC provides a better enamel-adhesive interface, compared to the bracket base.
PubMed: 38562221
DOI: 10.15644/asc58/1/2 -
Journal of Personalized Medicine Mar 2024Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding,...
INTRODUCTION
Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding, others only positioning. This study aimed to assess the accuracy of a new MD (Pirifix) coupling these two functions during LFIO on 3D-printed models.
MATERIALS AND METHODS
DICOM data were selected from patients who underwent surgical planning for LFIO between 27 July 2020 and 1 December 2022. Their anatomy was reproduced after segmentation, planning, and stereolithography in two models. Each model was assigned to one of two surgical groups: the control group (positioning by occlusal splint) and the Pirifix group. Each patient's model was planned with the objective of horizontalizing and recentering the UDA. After positioning, models were digitalized using Einscan Pro 2X and compared to the planned model with CloudCompare. The statistical analysis was performed using the Wilcoxon Mann-Whitney test. The result was considered significant if the -value was less than 0.05.
RESULTS
Twenty-one patients were selected. Forty-two anatomical models were 3D-printed. The mean difference compared to the planned and corrected positions was 0.69 mm for the control group and 0.84 mm for the Pirifix group ( = 0.036).
CONCLUSION
Pirifix may be a new alternative to available MDs. Further investigations are needed to describe the relationship between the device and facial soft tissues.
PubMed: 38541066
DOI: 10.3390/jpm14030324 -
The European Journal of Prosthodontics... May 2024To evaluate the effect of different agitation methods on apical extrusion of 1.5% sodium hypochlorite (NaOCl) in an ex vivo model of immature teeth.
OBJECTIVE
To evaluate the effect of different agitation methods on apical extrusion of 1.5% sodium hypochlorite (NaOCl) in an ex vivo model of immature teeth.
METHODS
Sixty extracted human inferior incisors were prepared to simulate immature teeth and embedded in an artificial root socket made of silicone impression material. The teeth were then divided into four groups: Conventional needle irrigation (CNI) alone, CNI supplemented with Ultrasonic Irrigant Activation (UIA), EasyClean (EC), or XP-endo Finisher (XPF). Extruded NaOCl was collected, reacted with m-cresol purple, and its absorbance values were measured. The data were statistically analyzed using One-way analysis of variance with a significance level of 5%.
RESULTS
All groups showed apically extruded irrigating solution, and the mean volumes of extruded NaOCl did not differ significantly between any of the test groups (p⟩0.05).
CONCLUSION
The activation of 1.5% NaOCL by UIA, EC, or XPF as supplementary to CNI does not promote greater apical extrusion when compared to CNI alone in simulated immature teeth.
Topics: Sodium Hypochlorite; Humans; Root Canal Irrigants; Therapeutic Irrigation; Spectrophotometry; Root Canal Preparation; Tooth Apex; In Vitro Techniques; Incisor
PubMed: 38536738
DOI: 10.1922/EJPRD_2635Vieira07 -
Biomimetics (Basel, Switzerland) Mar 2024The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength... (Review)
Review
The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.
PubMed: 38534867
DOI: 10.3390/biomimetics9030182