-
Journal of Esthetic and Restorative... May 2024Dental implants placed in adolescent patients pose a challenge to restore and maintain an esthetic outcome over longer period of follow-up. Maxillomandibular changes...
OBJECTIVE
Dental implants placed in adolescent patients pose a challenge to restore and maintain an esthetic outcome over longer period of follow-up. Maxillomandibular changes throughout adulthood may lead to complications such as implant infraocclusion and interproximal contact loss. This case report describes an alternate prosthetic treatment strategy for maxillary single implant placed in an adolescent patient in the esthetic zone with inappropriate implant axis and screw hole placement.
CLINICAL CONSIDERATIONS
With temporary restorations, the gingiva and soft tissues were shaped to imitate the emerging profile of the contralateral side. A zirconia screw-retained abutment was customized as a copy-mirror from the contralateral prepared tooth to mimic the exact shape and to avoid labiolingual over contour by computer-aided design/computer-assisted manufacture (CAD/CAM). The porcelain laminate veneer was bonded to the zirconia abutment. Porcelain adhesive approach was used instead of traditional principles of retention and resistance form of the abutment.
CONCLUSIONS
A functional and esthetic outcome was achieved and maintained, while a minimally invasive procedure was implemented to use the malplaced implant instead of explanting it.
CLINICAL SIGNIFICANCE
The present report illustrates the prosthetic management of a malpositioned dental implant placed 20 years ago, utilizing a minimally invasive digital protocol.
PubMed: 38770703
DOI: 10.1111/jerd.13262 -
BMC Oral Health May 2024Endocrown in pediatric dentistry was rooted in the fundamental principles of preserving healthy dental tissues, leveraging contemporary adhesive methodologies.
BACKGROUND
Endocrown in pediatric dentistry was rooted in the fundamental principles of preserving healthy dental tissues, leveraging contemporary adhesive methodologies.
AIM
This research aimed on assessing and comparing the fracture resistance of pulpotomized primary molars when rehabilitated with zirconia crowns and two distinct types of endocrowns, namely E-Max and Brilliant Crios.
METHODS
The study involved thirty, anonymized, freshly extracted second primary molars that underwent pulpotomy. These teeth were then evenly divided into three groups, each consisting of ten specimens: the zirconia crown, the E-Max endocrown, and the Brilliant Crios endocrown groups. Post-pulpotomy, the teeth were prepared for their respective restorations. Subsequent to this preparation, the zirconia crowns, E-Max endocrowns, and Brilliant Crios endocrowns were secured. To evaluate the fracture resistance using a computer-controlled testing machine (Instron), a progressively increasing load was applied to each group until fracture occurred. The gathered data were then analyzed for outliers and subjected to normality testing using the Shapiro-Wilk and/or Kolmogorov-Smirnov tests, with a significance threshold set at 0.05.
RESULTS
There was no statistically significant difference in fracture resistance of pulpotomized primary molars among lithium disilicate (E-Max) group (mean=1367.59N), Brilliant Crios group (mean=1349.73N) and zirconia group (mean=1240.82N).
CONCLUSION
Endocrowns can be considered a promising restoration for pulpotomized primary molars.
Topics: Zirconium; Molar; Humans; Tooth, Deciduous; Dental Porcelain; Crowns; Pulpotomy; Tooth Fractures; Dental Stress Analysis; Ceramics; Dental Restoration, Permanent; Materials Testing
PubMed: 38764030
DOI: 10.1186/s12903-024-04332-4 -
Journal of Dentistry Jul 2024The aim of this study is to compare the aesthetic outcomes of metal porcelain (C), lithium disilicate (T1) and porcelain-layered zirconium (T2) immediate... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
OBJECTIVES
The aim of this study is to compare the aesthetic outcomes of metal porcelain (C), lithium disilicate (T1) and porcelain-layered zirconium (T2) immediate implant-supported single crowns in the anterior maxilla.
MATERIALS AND METHODS
Forty-five immediate dental implants were provided for 45 patients that required the extraction of a single tooth in the anterior maxilla. A temporary prosthesis was provided at 8 weeks after placement followed by the final prosthesis at 24 weeks post-implantation. The patients were randomly allocated into 3 groups: 15 patients in the control group (C) received a metal-porcelain restoration, 15 patients (T1) received a lithium disilicate (LD) restoration and 15 patients (T2) received a porcelain-layered, zirconium (Z) restoration. Pink (PES) and White (WES) esthetic scores, radiographic bone levels, periodontal parameters and patient's esthetic satisfaction using a visual analogue scale (VAS) were evaluated at the time of final restoration placement (t0) and at 12-months post-loading (t12).
RESULTS
No implants were lost during the duration of this study. Statistically significant higher WES and VAS scores (p < 0.05) were recorded in T1 vs C and T1 vs T2 groups respectively. Similar radiographic bone levels and periodontal parameters were recorded in all groups.
CONCLUSION
Within the limitations of this study, it was concluded that T1 restorations provided better WES outcomes when compared to C restorations and better VAS scores when compared to T2 restorations at 12 months post-loading. Besides, different material interphases did not have an impact in PES, bone levels or periodontal parameters.
CLINICAL RELEVANCE
There is limited data comparing aesthetic outcomes of implant supported single crowns made of different ceramic materials based on accepted and comparable indexes and the evaluation of the patient's perspective regarding these aesthetic outcomes.
Topics: Humans; Esthetics, Dental; Dental Implants, Single-Tooth; Female; Male; Zirconium; Dental Porcelain; Crowns; Adult; Dental Prosthesis, Implant-Supported; Middle Aged; Treatment Outcome; Immediate Dental Implant Loading; Patient Satisfaction; Dental Materials; Maxilla; Metal Ceramic Alloys; Dental Prosthesis Design; Young Adult
PubMed: 38763385
DOI: 10.1016/j.jdent.2024.105067 -
BMJ Case Reports May 2024This case report focuses on the replacement of ceramic laminate veneers with suboptimal marginal fit and design, employing a digital workflow and CAD-CAM technology. The...
This case report focuses on the replacement of ceramic laminate veneers with suboptimal marginal fit and design, employing a digital workflow and CAD-CAM technology. The patient, a woman in her 30s, expressed concerns about the appearance and hygiene challenges of her existing veneers. A comprehensive assessment, including clinical examination, facial photographs and intraoral scanning, was conducted. Utilising CAD software, facial photographs and 3D models merged to create a digital wax-up, crucial in designing suitable veneers and addressing issues like overcontouring and a poor emergence profile. Following the removal of old veneers, a mock-up was performed and approved. Preparations ensured space for restorations with well-defined margins. The final restorations, milled with Leucite-reinforced vitreous ceramic, were cemented. At the 1 year follow-up, improved aesthetics, gingival health and functional restorations were observed. This report highlights the efficacy of digital workflows in achieving consistent and aesthetically pleasing outcomes in ceramic laminate veneer replacement.
Topics: Humans; Dental Veneers; Female; Computer-Aided Design; Workflow; Adult; Ceramics; Esthetics, Dental; Dental Prosthesis Design; Dental Porcelain
PubMed: 38749520
DOI: 10.1136/bcr-2023-259491 -
Indian Journal of Dental Research :... Oct 2023The need to perform restorations with a natural appearance is one of the most challenging aspects of dentistry, and reproducing the colour of natural teeth in...
INTRODUCTION
The need to perform restorations with a natural appearance is one of the most challenging aspects of dentistry, and reproducing the colour of natural teeth in restorations is a clinical challenge due to the complex optical characteristics of dentition. Various procedures have been advocated in the literature to correct dental anomalies, particularly in the aesthetic region, such as tooth discoloration due to fluorosis or dentition spacing due to changes in tooth shape, such as peg laterals.
CLINICAL APPLICATIONS
Veneer are one of the most commonly used treatment modalities in such cases. As the use of ceramics necessitates the use of more opaque restorative materials or different thickness, obtaining adequate results in terms of the final colour of the restoration becomes increasingly difficult. The purpose of this study is to present a clinical case of smile rehabilitation in the anterior region with facets made of lithium disilicate, with the goal of achieving colour uniformity and demonstrating the benefits and achieving smile aesthetics.
TAKEAWAY LESSONS
Technological advancement such as intraoral scanner for impression making have significant improved the success of prosthesis. This case report presents conservative and aesthetic procedure in the management of closing the space in maxillary anterior region using lithium disilicate laminate veneers with trios software.
Topics: Humans; Dental Veneers; Esthetics, Dental; Dental Porcelain; Smiling; Female; Adult; Dental Prosthesis Design; Computer-Aided Design
PubMed: 38739834
DOI: 10.4103/ijdr.ijdr_430_23 -
Scientific Reports May 2024This study aimed to assess the knowledge regarding impacts, causes and management of black triangles (BT) among participants from different educational backgrounds... (Observational Study)
Observational Study
This study aimed to assess the knowledge regarding impacts, causes and management of black triangles (BT) among participants from different educational backgrounds including dental students, dentists and laypeople. This descriptive cross-sectional observational research included 435 participants who comprised 4 groups: pre-clinical (3rd year) dental students, clinical (4th and 5th year) dental students, dentists, and laypeople. A constructed self-reported questionnaire was utilized to assess participants' demographic data and their knowledge of the impacts, causes and management of BT. The VAS scale was used to assess participants' ratings for the impacts of BT on esthetics, with 0 meaning no impact and 10 meaning very severe negative impacts. The most reported treatments for BT were "cannot be treated" 99.3% and "non-surgical periodontal treatment" 67.1%. Meanwhile, the least reported was "modify the porcelain" 41.8%. The most reported cause of BT was "periodontal disease" 85.1%. However, the least reported were "parafunction" and "deep implants" 33.1% each. Dental professionals had better knowledge of the causes (t = 8.189, P < 0.001) and management (t = 8.289, P < 0.001) of BT than the non-dental participants. The dentists had the best knowledge, while the laypeople had the least knowledge of the causes (F = 62.056, P < 0.001) and treatment (F = 46.120, P < 0.001) of BT. The knowledge of the causes (t = 0.616, P = 0.538) and treatment (t = 1.113, P = 0.266) for BT was not significantly different between males and females. Age was not significantly related to the total knowledge about the causes (r = -0.034, P = 0.475) or treatment (r = -0.034, P = 0.482) for BT. Dental professionals had better knowledge of the impacts, causes and management of BT than the non-dental participants. The dentists were the best, while the laypeople were the worst in this regard. Age and gender had no relationships with the knowledge of causes or management of BT.
Topics: Humans; Male; Female; Dentists; Adult; Cross-Sectional Studies; Health Knowledge, Attitudes, Practice; Surveys and Questionnaires; Students, Dental; Young Adult; Middle Aged
PubMed: 38735998
DOI: 10.1038/s41598-024-61356-0 -
BMC Oral Health May 2024This Finite Element Analysis was conducted to analyze the biomechanical behaviors of titanium base abutments and several crown materials with respect to fatigue lifetime...
BACKGROUND
This Finite Element Analysis was conducted to analyze the biomechanical behaviors of titanium base abutments and several crown materials with respect to fatigue lifetime and stress distribution in implants and prosthetic components.
METHODS
Five distinct designs of implant-supported single crowns were modeled, including a polyetheretherketone (PEEK), polymer-infiltrated ceramic network, monolithic lithium disilicate, and precrystallized and crystallized zirconia-reinforced lithium silicates supported by a titanium base abutment. For the static load, a 100 N oblique load was applied to the buccal incline of the palatal cusp of the maxillary right first premolar. The dynamic load was applied in the same way as in static loading with a frequency of 1 Hz. The principal stresses in the peripheral bone as well as the von Mises stresses and fatigue strength of the implants, abutments, prosthetic screws, and crowns were assessed.
RESULTS
All of the models had comparable von Mises stress values from the implants and abutments, as well as comparable maximum and minimum principal stress values from the cortical and trabecular bones. The PEEK crown showed the lowest stress (46.89 MPa) in the cervical region. The prosthetic screws and implants exhibited the highest von Mises stress among the models. The lithium disilicate crown model had approximately 9.5 times more cycles to fatique values for implants and 1.7 times more cycles to fatique values for abutments than for the lowest ones.
CONCLUSIONS
With the promise of at least ten years of clinical success and favorable stress distributions in implants and prosthetic components, clinicians can suggest using an implant-supported lithium disilicate crown with a titanium base abutment.
Topics: Titanium; Crowns; Finite Element Analysis; Dental Prosthesis, Implant-Supported; Humans; Dental Stress Analysis; Dental Abutments; Benzophenones; Dental Porcelain; Polyethylene Glycols; Dental Materials; Polymers; Ketones; Zirconium; Dental Implants, Single-Tooth; Materials Testing; Dental Implant-Abutment Design; Biomechanical Phenomena
PubMed: 38730391
DOI: 10.1186/s12903-024-04328-0 -
Journal of Dentistry Jul 2024To give a comprehensive review of advancement in dental ceramics, fabrication methods, and the challenges associated with clinical application. (Review)
Review
OBJECTIVES
To give a comprehensive review of advancement in dental ceramics, fabrication methods, and the challenges associated with clinical application.
DATA, SOURCES AND STUDY SELECTION
Researches on chemical composition, biomechanical behaviors, optical properties, bonding strategies and fabrication methods were included. The search of articles was independently conducted by two authors in the PubMed, Scopus, Medline and Web of Science.
CONCLUSIONS
Dental ceramics have shown significant advancements in terms of esthetics and function. However, improving fracture toughness without compromising optical properties remains a challenge. Repairing fractured zirconia or glass-matrix ceramic prostheses with the same material is difficult due to the sintering process. Developing innovative bonding techniques that provide strong and long-lasting bonding strength between ceramics and tooth structures poses a recurring obstacle.
CLINICAL SIGNIFICANCE
Despite the emergence of dental ceramics and fabrication techniques, certain limitations such as susceptibility to brittleness and fracture still exist. Therefore, the current review provided valuable information around the advanced dental ceramics in tooth repair. The laboratory test data and the clinical outcome are also presented in details, aiming to guide clinicians in making informed decisions regarding ceramic restorations.
Topics: Humans; Ceramics; Zirconium; Dental Materials; Dental Bonding; Dental Porcelain; Esthetics, Dental; Materials Testing; Dental Prosthesis Design
PubMed: 38729288
DOI: 10.1016/j.jdent.2024.105053 -
Cureus Apr 2024In order to effectively address challenges related to anterior teeth restoration and achieve natural-looking results, considerations such as shape, size, gingival...
In order to effectively address challenges related to anterior teeth restoration and achieve natural-looking results, considerations such as shape, size, gingival contour, and color are crucial. Due to an increasing desire for visually appealing alternatives that are free of metal, materials such as dental zirconia have become popular because of their superior aesthetics and mechanical characteristics. This case report presents clinical insights into anterior teeth rehabilitation with the use of layered zirconia fixed dental prostheses. It delves into the experiences associated with zirconia dental restorations on both endodontically treated and vital abutments, aiming to discern how various factors influence treatment outcomes. Beginning with the design of the restoration, its intricacies significantly impact its fit, strength, and overall durability. Moreover, the composition of zirconia used plays a pivotal role, as different formulations offer varying degrees of mechanical properties, influencing factors such as resilience and wear resistance. The shade selection is also scrutinized, as it directly affects the restoration's aesthetic integration with surrounding natural teeth, contributing to a more harmonious smile. Furthermore, the layering technique employed, particularly when additional porcelain or ceramic layers are applied, is essential for both cosmetic enhancement and structural integrity. Lastly, considerations of occlusion are paramount, ensuring proper alignment and contact between teeth to prevent premature wear and discomfort. By exploring these facets in zirconia restorations across different abutment types, this inquiry seeks to illuminate best practices for achieving favorable treatment outcomes in dental restoration procedures. The choice of zirconia composition, framework design, and shade must be carefully tailored to suit the characteristics of each individual abutment. This emphasizes the significance of adopting a tailored approach to tackle the distinct challenges posed by every clinical scenario. The manuscript provides detailed observations from a clinical case involving the restoration of anterior teeth utilizing monolithic zirconia-fixed dental prostheses. Through a combination of root canal treatment and composite buildup, successful restoration was achieved, with meticulous attention paid to aesthetic considerations. The utilization of computer-aided designing/computer-aided manufacturing (CAD/CAM) technology in crafting zirconia restorations ensured precise fit and superior biocompatibility, contributing to the overall success of the treatment. The study underscores the importance of personalized treatment strategies in achieving optimal outcomes in anterior teeth restoration, emphasizing the need for careful consideration of various factors such as design, composition, and shade selection. Overall, the findings shed light on the potential of zirconia-based restorations in addressing the unique challenges associated with anterior teeth rehabilitation, offering valuable insights for dental practitioners striving to deliver aesthetically pleasing and functionally sound outcomes for their patients.
PubMed: 38725786
DOI: 10.7759/cureus.57889 -
Journal of Applied Biomaterials &... 2024Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs)... (Review)
Review
Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study's objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.
Topics: Humans; Ceramics; Resin Cements; Dental Porcelain; Dental Prosthesis, Implant-Supported; Denture, Partial, Fixed, Resin-Bonded; Zirconium
PubMed: 38706266
DOI: 10.1177/22808000241250118