-
Clinical Oral Investigations Jun 2024The aim of this study was to evaluate whether thermal implant removal of osseointegrated implants is possible using a diode laser with an specific temperature-time...
OBJECTIVES
The aim of this study was to evaluate whether thermal implant removal of osseointegrated implants is possible using a diode laser with an specific temperature-time interval.
MATERIALS AND METHODS
First, tooth extraction of the first three premolars was performed in the maxilla and mandible on both sides of 10 pig. After 3 months, implants were inserted into the upper and lower jaws of 10 pigs. After 3 more months, osseointegrated implants were heated with a laser device to a temperature of 50 °C for 1 min. After 14 days, the implant stability quotient (ISQ), torque-out values, and bone-to-implant contact (BIC) ratio were assessed using resonance frequency analysis.
RESULTS
ISQ values showed no significant differences within each group or between the control and test groups. Furthermore, torque-out and BIC value measurements presented no significant differences between the groups.
CONCLUSIONS
At 50°C, changes in the BIC values were noticeably smaller; however, these differences were not significant. Future studies should evaluate the same procedures at either a higher temperature or longer intervals.
CLINICAL RELEVANCE
With only 50 °C for 1 min, a dental implant will not de-integrate predictably.
Topics: Animals; Swine; Dental Implants; Device Removal; Proof of Concept Study; Hot Temperature; Resonance Frequency Analysis; Dental Implantation, Endosseous; Torque; Osseointegration
PubMed: 38937381
DOI: 10.1007/s00784-024-05619-0 -
International Journal of Implant... Jun 2024This propensity score matching, multicenter, cross-sectional study was performed to examine the effects of various prosthetic methods for dental clinic outpatients with...
Effects of various prosthetic methods for patients with Kennedy Class I partial edentulism on oral hypofunction, subjective symptoms, and oral health-related quality of life.
PURPOSE
This propensity score matching, multicenter, cross-sectional study was performed to examine the effects of various prosthetic methods for dental clinic outpatients with Kennedy Class I partial edentulism (KCIPE) on oral hypofunction, subjective frailty symptoms, and oral health-related quality of life (QOL).
METHODS
Patients (n = 348) were classified into the following three groups for analysis: NT, patients with natural dentition providing intermaxillary contact in four occlusal supporting zones; RPD, patients with KCIPE who received removable partial dentures; and ISFP, patients with KCIPE who received implant-supported fixed prostheses. Participants' basic characteristics were recorded, and oral function tests were conducted. Subjective symptoms of physical and oral frailty were investigated via questionnaire. Oral health-related QOL was assessed using the Japanese short version of the Oral Health Impact Profile (OHIP-JP16). Propensity score matching was performed to adjust for patient background factors that could influence oral hypofunction in each group.
RESULTS
Compared with the ISFP group, the RPD group had significantly higher rates of poor oral hygiene, reduced occlusal force, decreased masticatory function, and declines in swallowing function and oral hypofunction; the odds ratio for oral hypofunction was 4.67. Compared with the ISFP group, the RPD group had significantly greater subjective symptoms of physical frailty and oral frailty, as well as higher OHIP scores.
CONCLUSIONS
Prosthetic treatment of KCIPE affected oral hypofunction, subjective frailty symptoms, and oral health-related QOL in dental clinic outpatients.
Topics: Humans; Quality of Life; Cross-Sectional Studies; Male; Female; Middle Aged; Oral Health; Jaw, Edentulous, Partially; Denture, Partial, Removable; Aged; Surveys and Questionnaires; Propensity Score; Dental Prosthesis, Implant-Supported; Denture, Partial, Fixed; Adult
PubMed: 38935335
DOI: 10.1186/s40729-024-00555-w -
Indian Journal of Dental Research :... Jan 2024This case report outlines a novel prosthodontic approach for managing a broken screw inside an implant screw channel, emphasising the importance of innovative solutions...
RATIONALE
This case report outlines a novel prosthodontic approach for managing a broken screw inside an implant screw channel, emphasising the importance of innovative solutions in implant dentistry.
PATIENT CONCERNS
A 57-year-old male patient sought restoration for implant-supported crowns (#46 and #47). A broken screw inside the implant screw channel posed a significant concern for both the patient and the dental team.
TREATMENT
Utilising an impression pickup technique of the inner surface of the implant body, a custom titanium abutment was fabricated in the laboratory and restoration was successfully replaced. A follow-up of 6 months was performed, ensuring optimal function and patient satisfaction.
OUTCOME
The custom titanium abutment with a zirconia crown was placed, leading to a successful restoration. The patient reported no discomfort, demonstrating improved function and aesthetics.
TAKEAWAY LESSON
This case highlights the effectiveness of tailored prosthodontic interventions in addressing complex implant-related complications.
Topics: Humans; Male; Middle Aged; Crowns; Dental Prosthesis, Implant-Supported; Dental Implants; Dental Implant-Abutment Design; Dental Restoration Failure; Zirconium; Titanium; Dental Abutments
PubMed: 38934762
DOI: 10.4103/ijdr.ijdr_953_23 -
Indian Journal of Dental Research :... Jan 2024Rehabilitation of partially edentulous arches with a cast partial denture is a commonly opted treatment modality where fixed prosthesis is not indicated. However, due to...
Rehabilitation of partially edentulous arches with a cast partial denture is a commonly opted treatment modality where fixed prosthesis is not indicated. However, due to the aesthetic compromise of the various metal components when placed in the esthetic zone, different modifications have been considered for its fabrication. This case report describes a novel way of restoring partially edentulous arches with increased masticatory efficiency and good emergence profile without compromising the patient's esthetic desires. The report describes an aesthetic alternative using thermoplastic denture base clasp like extension for anterior abutment teeth while restoring the missing teeth with a cast partial denture.
Topics: Humans; Dental Abutments; Denture Design; Denture Bases; Jaw, Edentulous, Partially; Esthetics, Dental; Dental Clasps; Female; Male
PubMed: 38934758
DOI: 10.4103/ijdr.ijdr_97_23 -
Indian Journal of Dental Research :... Jan 2024To comparatively evaluate the effect of normal saline gel and ozonated saline-ozonated gel (ozone therapy) on pain, inflammation, soft tissue, and crestal bone loss in... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
AIMS
To comparatively evaluate the effect of normal saline gel and ozonated saline-ozonated gel (ozone therapy) on pain, inflammation, soft tissue, and crestal bone loss in dental implant surgery.
METHODS AND MATERIAL
Forty adult patients scheduled to undergo implant were randomized into two groups: Twenty patients (n = 20) received ozone therapy and controls (n = 20) received normal saline and gel during implant placement. Inflammation and pain were noted at days 1 and 7 and 3 month intervals by estimating C-reactive protein (CRP) levels and assessing visual analogue scale (VAS) scores. At 3 months, soft tissue outcomes were noted in terms of plaque index, gingival index, and pocket depth, while crestal bone loss was noted via a radiograph.
RESULTS
Mean CRP levels were significantly higher in the control group as compared to that in the case group on day 1 and day 7 follow-ups (P < 0.05). Mean VAS scores for pain were also lower in the case group as compared to the control group at all follow-ups, but the difference was significant statistically only at day 1 (P = 0.061). The plaque index was significantly lower in the case group as compared to the control group (P = 0.011) at final follow-up. No significant difference between two groups was observed for crestal bone loss.
CONCLUSIONS
Ozone therapy during implant placement was effective in reduction of pain, systemic inflammation, and plaque deposition in dental implant patients.
Topics: Humans; Ozone; Gels; Male; Female; Adult; Middle Aged; C-Reactive Protein; Saline Solution; Dental Implants; Dental Plaque Index; Alveolar Bone Loss; Periodontal Index; Pain Measurement; Dental Implantation; Inflammation
PubMed: 38934740
DOI: 10.4103/ijdr.ijdr_591_23 -
Indian Journal of Dental Research :... Jan 2024
Topics: Humans; Dental Implants; Robotics; Robotic Surgical Procedures; Dental Implantation, Endosseous
PubMed: 38934739
DOI: 10.4103/ijdr.ijdr_358_24 -
Case Reports in Dentistry 2024Bone resorption following tooth loss might compromise retention, stability, and support of conventional removable prostheses, and for this reason, implant-supported...
Bone resorption following tooth loss might compromise retention, stability, and support of conventional removable prostheses, and for this reason, implant-supported overdentures are suggested as a viable alternative for completely edentulous patients. Bars, telescopic attachments, or stud attachments have been used to provide retention through a different mechanism of action based on specific design characteristics. The purpose of this report is to thoroughly describe the applied protocol for the fabrication of an implant overdenture supported by two bars incorporating stud attachments. A 67-year-old male patient presented to the Postgraduate Clinic of the National and Kapodistrian University in Athens seeking dental rehabilitation. The remaining teeth were characterized with poor prognosis, mainly due to their periodontal status. The proposed treatment plan included the placement of four implants in the maxilla and two implants in the mandible and the fabrication of implant-supported overdentures. The diagnostic stages revealed adequate prosthetic space that would enable the fabrication of a bar substructure for the maxillary overdenture. To combine the benefits of bars and stud attachments, two bars with four attachments were fabricated. Evaluation of the delivered prosthesis revealed adequate retention, support, and stability achieved with minimal palatal coverage. Patient's reported satisfaction and quality of life were increased. Recall appointments at one, six, and twelve months did not reveal any adverse effects or patient's complaints. According to the present case report, different types of attachments may be used after careful study of each case. More studies are needed to report on different aspects of the chosen treatment plan.
PubMed: 38933360
DOI: 10.1155/2024/2818034 -
Polymers Jun 2024The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication.... (Review)
Review
The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes.
PubMed: 38932068
DOI: 10.3390/polym16121717 -
Materials (Basel, Switzerland) Jun 2024Although advancements in CAD/CAM technology allow for more personalized treatments, it is not clear how modifications in the CAD/CAM milling process could affect the...
Although advancements in CAD/CAM technology allow for more personalized treatments, it is not clear how modifications in the CAD/CAM milling process could affect the restoration surface conditions and their mechanical behavior. The objective of this study was to evaluate the effect of different CAD/CAM milling protocols on the topography and fracture behavior of zirconia monolithic crowns (3Y-PSZ) subjected to a chewing simulation. Monolithic 3Y-PSZ premolar crowns were milled using three protocols ( = 13) (slow (S), normal (N), and fast (F)). Crowns were cemented on a dentin analog abutment and subjected to mechanical aging (200 N, 2 Hz, 1,500,000 cycles, 37 °C water). Surviving crowns were subjected to compressive load test and analyzed using fractography. Fracture load data were analyzed with two-parameter Weibull analysis. The surface topography of the crowns was examined with a stereomicroscope and a 3D non-contact profiler. All crowns survived the chewing simulation. Crowns milled using the F protocol had the greatest characteristic fracture load, while crowns produced with the S protocol showed high Weibull modulus. Groups N and S had a more uniform surface and detailed occlusal anatomy than group F. The CAD/CAM milling protocol affected the topography and mechanical behavior of 3Y-PSZ monolithic crowns.
PubMed: 38930350
DOI: 10.3390/ma17122981 -
Journal of Clinical Medicine Jun 2024: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a... (Review)
Review
: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a critical factor in clinical decision making for these vulnerable patients. This review aims to evaluate the changes in OHRQoL after treatment with different types of full-arch prostheses in the elderly edentulous population to determine the prostheses that result in the greatest improvement in OHRQoL. : Clinical studies of different types of full-arch prostheses that measured the OHRQoL in edentulous patients 60 years or older were searched for in the PubMed, Embase and Scopus electronic databases, with additional hand searching to summarize the outcomes of the selected studies. : Among the 302 identified studies, 10 studies were selected. A total of 504 patients wearing 133 complete dentures, 372 implant overdentures and 39 fixed prostheses were assessed among the selected studies. The overall OHIP and GOHAI scores were evaluated at baseline and in the 3rd, 6th, 12th and 18th months of treatment with the respective prostheses. The improved OHRQoL with overall OHIP scores associated with conventional dentures were 9.21-12.5% from the 3rd month to 1 year after treatment, whereas those associated with implant overdentures and full-arch fixed prosthesis were 9-25.26% at 1 year and 18.53-26.79 at the 18th-month follow-up, respectively. The increased overall GOHAI scores were 21.3-25.43% for conventional dentures, 36.82-41.32% for implant overdentures and 39.48-42.83% for full-arch fixed prosthesis from the 3rd month to the 6th-month follow-up. : In general, the improvement in OHRQoL after rehabilitation with implant overdentures declined at one year, and that with full-arch fixed prosthesis declined at the 18th-month follow-up; meanwhile, the OHRQoL associated with conventional dentures improved stably up to one year, but the implant-supported prostheses resulted in an obviously greater improvement in the OHRQoL than that obtained with conventional dentures. However, studies with longer follow-up periods are still required to evaluate the long-term clinical effectiveness.
PubMed: 38929921
DOI: 10.3390/jcm13123391