-
Biosensors Feb 2023(MTB) is a communicable disease and still remains a threat to common health. Thus, early diagnosis and treatment are required to prevent the spread of infection....
(MTB) is a communicable disease and still remains a threat to common health. Thus, early diagnosis and treatment are required to prevent the spread of infection. Despite the recent advances in molecular diagnostic systems, the commonly used MTB diagnostic tools are laboratory-based assays, such as mycobacterial culture, MTB PCR, and Xpert MTB/RIF. To address this limitation, point-of-care testing (POCT)-based molecular diagnostic technologies capable of sensitive and accurate detection even in environments with limited sources are needed. In this study, we propose simple tuberculosis (TB) molecular diagnostic assay by combining sample preparation and DNA-detection steps. The sample preparation is performed using a syringe filter with amine-functionalized diatomaceous earth and homobifunctional imidoester. Subsequently, the target DNA is detected by quantitative PCR (polymerase chain reaction). The results can be obtained within 2 h from samples with large volumes, without any additional instruments. The limit of detection of this system is 10 times higher than those of conventional PCR assays. We validated the clinical utility of the proposed method in 88 sputum samples obtained from four hospitals in the Republic of Korea. Overall, the sensitivity of this system was superior to those of other assays. Therefore, the proposed system can be useful for MTB diagnosis in limited-resource settings.
Topics: Humans; Mycobacterium tuberculosis; Tuberculosis, Pulmonary; Pathology, Molecular; Sensitivity and Specificity; Sputum; Molecular Diagnostic Techniques
PubMed: 36832025
DOI: 10.3390/bios13020259 -
Biotechnology Progress 2023Upstream advances have led to increased mAb titers above 5 g/L in 14-day fed-batch cultures. This is accompanied by higher cell densities and process-related impurities...
Upstream advances have led to increased mAb titers above 5 g/L in 14-day fed-batch cultures. This is accompanied by higher cell densities and process-related impurities such as DNA and Host Cell Protein (HCP), which have caused challenges for downstream operations. Depth filtration remains a popular choice for harvesting CHO cell culture, and there is interest in utilizing these to remove process-related impurities at the harvest stage. Operation of the harvest stage has also been shown to affect the performance of the Protein A chromatography step. In addition, manufacturers are looking to move away from natural materials such as cellulose and Diatomaceous Earth (DE) for better filter consistency and security of supply. Therefore, there is an increased need for further understanding and knowledge of depth filtration. This study investigates the effect of depth filter material and loading on the Protein A resin lifetime with an industrially relevant high cell density feed material (40 million cells/ml). It focuses on the retention of process-related impurities such as DNA and HCP through breakthrough studies and a novel confocal microscopy method for imaging foulant in-situ. An increase in loading of the primary-synthetic filter by a third, led to earlier DNA breakthrough in the secondary filter, with DNA concentration at a throughput of 50 L/m being more than double. Confocal imaging of the depth filters showed that the foulant was pushed forward into the filter structure with higher loading. The additional two layers in the primary-synthetic filter led to better pressure profiles in both primary and secondary filters but did not help to retain HCP or DNA. Reduced filtrate clarity, as measured by OD600, was 1.6 fold lower in the final filtrate where a synthetic filter train was used. This was also associated with precipitation in the Protein A column feed. Confocal imaging of resin after 100 cycles showed that DNA build-up around the outside of the bead was associated with synthetic filter trains, leading to potential mass transfer problems.
Topics: Cricetinae; Animals; Cricetulus; Batch Cell Culture Techniques; CHO Cells; Filtration; Cell Count; Staphylococcal Protein A
PubMed: 36775837
DOI: 10.1002/btpr.3329 -
Journal of Medical Entomology Mar 2023The exotic southern cattle fever tick, Rhipicephalus (Boophilus) microplus (Canestrini) (Ixodida: Ixodidae), since its eradication from the United States in 1943, made a...
The exotic southern cattle fever tick, Rhipicephalus (Boophilus) microplus (Canestrini) (Ixodida: Ixodidae), since its eradication from the United States in 1943, made a strong incursion into Texas, beginning 2016. The pest is arguably the most economically detrimental ectoparasite of cattle, Bos taurus L., worldwide. Current R. (B.) microplus control mostly relies on conventional synthetic acaricides to which the ixodid has been developing resistance. Our study demonstrates that commercially available desiccant dust products, with and without bioactive botanical additives, are strongly lethal, when applied dry, against larval R. (B.) microplus in the laboratory, and after being released on dust-treated cattle. Deadzone (renamed Celite 610, a diatomaceous earth product), Drione (silica gel + pyrethrins + piperonyl butoxide synergist), and EcoVia (silica gel + thyme oil), each prophylactically prevented larval R. (B.) microplus from attaching to and feeding on stanchioned calves. Desiccant dust-based products are less likely than conventional synthetic acaricides to decline in terms of efficacy as a result of ixodid resistance, and other desiccant dust advantages, including extended residual, flexibility in terms of application methods, environmental, animal, and human safety, and possible compatibility with organic, or 'green', production systems, are discussed. We anticipate that the desiccant dusts we evaluated, and others not included in this study (e.g., kaolin, perlite, and silica gel) will be effective when used with other control tactics in integrated pest management approaches for controlling R. (B.) microplus (and other ixodid species).
Topics: Humans; Cattle; Animals; Rhipicephalus; Ixodidae; Hygroscopic Agents; Acaricides; Dust; Silica Gel; Pyrethrins; Larva; Coleoptera; Cattle Diseases; Tick Infestations
PubMed: 36734019
DOI: 10.1093/jme/tjad010 -
Marine Pollution Bulletin Mar 2023Algae are believed to give health benefits. However, the studies showed they contain toxic elements, including radionuclides, and may affect human health. The study...
Algae are believed to give health benefits. However, the studies showed they contain toxic elements, including radionuclides, and may affect human health. The study presents the values of activity concentrations of Po and Pb in the algae supplements available worldwide for adults. The activity concentrations (Bq/kg dw) ranged from 0.07 to 14.5 (Po) and from 0.06 to 8.48 (Pb). Also, the effective radiation doses and the cancer risk from Po and Pb decay ingested with analyzed algal supplements have been assessed. The highest values of annual effective doses have been estimated for Po in the recommended portion of Spirulina (Arthrospira platensis) from China (59.7 μSv/year) and Diatomaceous earth from the USA (50.4 μSv/year). The cancer morbidity and mortality risk ranged from 10 to 10. The study indicated the activity concentrations of Po and Pb were low, and algae supplements for human consumption could be considered safe food.
Topics: Humans; Lead; Lead Radioisotopes; Polonium; Diet; Radiation Monitoring
PubMed: 36682306
DOI: 10.1016/j.marpolbul.2023.114591 -
Environment International Feb 2023Desert dust is increasingly recognized as a major air pollutant affecting respiratory health. Since desert dust exposure cannot be regulated, the hazardousness of its...
Desert dust is increasingly recognized as a major air pollutant affecting respiratory health. Since desert dust exposure cannot be regulated, the hazardousness of its components must be understood to enable health risk mitigation strategies. Saharan dust (SD) comprises about half of the global desert dust and contains quartz, a toxic mineral dust that is known to cause severe lung diseases via oxidative stress and activation of the NLRP3 inflammasome-interleukin-1β pathway. We aimed to assess the physicochemical and microbial characteristics of SD responsible for toxic effects. Also, we studied the oxidative and pro-inflammatory potential of SD in alveolar epithelial cells and the activation of the NLRP3 inflammasome in macrophage-like cells in comparison to quartz dusts and synthetic amorphous silica (SAS). Characterization revealed that SD contained Fe, Al, trace metals, sulfate, diatomaceous earth, and endotoxin and had the capacity to generate hydroxyl radicals. We exposed A549 lung epithelial cells and wild-type and NLRP3 THP-1 macrophage-like cells to SD, three well-investigated quartz dusts, and SAS. SD induced oxidative stress in A549 cells after 24 h more potently than the quartz dusts. The quartz dusts and SAS upregulated interleukin 8 expression after 4 h and 24 h while SD only caused a transient upregulation. SD, the quartz dusts, and SAS induced interleukin-1β release from wild-type THP-1 cells>20-fold stronger than from NLRP3 THP-1 cells. Interleukin-1β release was lower for SD, in which microbial components including endotoxin were heat-destructed. In conclusion, microbial components in SD are pivotal for its toxicity. In the epithelium, the effects of SD contrasted with crystalline and amorphous silica in terms of potency and persistence. In macrophages, the strong involvement of the NLRP3 inflammasome emphasizes the acute and chronic health risks associated with desert dust exposure.
Topics: Cytokines; Dust; Endotoxins; Inflammasomes; Interleukin-1beta; NLR Family, Pyrin Domain-Containing 3 Protein; Oxidative Stress; Quartz; Silicon Dioxide; Humans; A549 Cells
PubMed: 36680803
DOI: 10.1016/j.envint.2023.107732 -
Scientific Reports Jan 2023In this study, injection moulding was applied to produce biocomposites consisting of polylactide (PLA) and amorphous diatomaceous earth used as a filler at different...
In this study, injection moulding was applied to produce biocomposites consisting of polylactide (PLA) and amorphous diatomaceous earth used as a filler at different concentrations. Natural wax and synthetic wax were added to improve processing properties, comparing the resulting biocomposites. The use of natural beeswax makes the composite environmentally friendly. The prepared composites contained 2.5, 5, 10 and 15% w/w filler. The test samples have been injection moulded. Rheological, mechanical, surface and other properties were assessed for the fabricated composites. The testing has shown that the use of wax additives has a significant influence on the mechanical properties (tensile strength, flexural strength, impact strength) and the hydrophilicity/hydrophobicity of composite surfaces. The addition of natural wax, especially at lower concentration, has a positive effect on the rheological properties of composites (melt flow rate, MFR), flexural modulus and impact strength. Different composite parameters are modified by different wax types so both natural and synthetic waxes, can be used interchangeably, depending on the required final material characteristics.
PubMed: 36670202
DOI: 10.1038/s41598-023-28435-0 -
Environmental Science and Pollution... Mar 2023The current study evaluates the efficacy of the entomopathogenic fungus Beauveria bassiana (Balsamo-Crivelli) Vuillemin (Hypocreales: Cordycipitaceae), diatomaceous...
The current study evaluates the efficacy of the entomopathogenic fungus Beauveria bassiana (Balsamo-Crivelli) Vuillemin (Hypocreales: Cordycipitaceae), diatomaceous earth (DE) (Protect-It), and the oxadiazine indoxacarb, at single or combined applications on wheat kernels, for the management of the rusty grain beetle, Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae), the red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), the khapra beetle, Trogoderma granarium Everts (Coleoptera: Dermestidae), and the lesser grain borer, Rhyzopertha dominica (F.) (Coleoptera: Bostrychidae). The study was conducted between November 2020 and August 2021 in Faisalabad under a complete randomized block design. The combination of DE + indoxacarb was the most efficient as it caused higher overall mortalities ranging between 59.34 and 100%, and lower overall progeny production ranging between 8.35 and 33.70 individuals per vial, than all other treatments. Beauveria bassiana alone exhibited the lowest mortality rates ranging between 22.33 and 47.76%, and the highest offspring emergence, ranging between 51.33 and 78.55 individuals per vial. Similar pattern was observed when persistence bioassays were conducted. For a period of 120 days, the DE + indoxacarb was the most powerful combination against all tested species, providing overall mortality rates between 17.06 and 63.80%. The overall progeny production was lower for the insect individuals exposed on wheat treated with the DE + indoxacarb combination, ranging between 13.66 and 52.23 individuals per vial, and higher for those exposed to B. bassiana alone, ranging between 44.03 and 107.67 individuals per vial, for the entire duration of storage. However, the efficacy of all treatments decreased gradually during the course of storage. The findings of the current study indicate that the combinations of entomopathogenic fungi, DE, and indoxacarb can be used for the prolonged protection of stored wheat from the tested noxious insect species of stored products. Further research, which will include other inert dusts in combination with entomopathogenic fungi and indoxacarb, may provide additional knowledge towards an effective management of noxious species occurring in storages.
Topics: Animals; Beauveria; Coleoptera; Diatomaceous Earth; Hypocreales; Insecta; Insecticides; Triticum
PubMed: 36640233
DOI: 10.1007/s11356-022-25075-1 -
Journal of Environmental Management Mar 2023The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems...
The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems and water quality warranting its amputation from polluted water. This article describes the preparation of a novel natural deep eutectic solvent (NADES) functionalized-celite/polyethylene glycol hydrogel nanocomposite (NADES-Cel/PEG HNC) for adsorptive phosphate removal from water. The XRD, FTIR, SEM coupled with EDX spectroscopy, TEM, BET analysis, and pH measurement were used to characterise the prepared material. Central composite design (CCD) in response surface methodology (RSM) was used for experimental design to analyse the individual and combined impact of five operational parameters on equilibrium adsorption capacity (Q), and evaluate the optimal operating conditions by numerical optimization, which were obtained as: contact time (60 min), adsorbent dosage (1.0 g/L), initial [PO] (80 mg/L), initial solution pH (3.5), and temperature (304 K). The adsorption process was best explicated via Langmuir adsorption isotherm with a noteworthy saturation capacity, Q of 111.80 mg PO/g at 298 K, and was favourable (S* = 0.99), feasible (ΔG° = -7.02 kJ/mol), exothermic (ΔH° = -8.39 kJ/mol) and physical in nature. The uptake mechanism largely involved H-bonding, electrostatic interaction, n-π interaction and pore-filling. Uptake kinetics of PO was best explicated by pseudo-second order model, and the rate-determining step involved both intraparticle and liquid film diffusion mechanisms. The admirable performance of NADES-Cel/PEG HNC was signified by its competent adsorption efficacy and effectual reusability. The pertinence of the hydrogel nanocomposite for treatment of real wastewater was tested. Hence, NADES-Cel/PEG HNC might prove to be a pragmatic adsorbent for decontamination of PO from an aqueous environment.
Topics: Thermodynamics; Diatomaceous Earth; Deep Eutectic Solvents; Solvents; Adsorption; Phosphates; Research Design; Ecosystem; Biocompatible Materials; Kinetics; Nanocomposites; Glycine; Polyethylene Glycols; Fructose; Water Pollutants, Chemical; Hydrogen-Ion Concentration
PubMed: 36621312
DOI: 10.1016/j.jenvman.2022.117206 -
Frontiers in Veterinary Science 2022Water is one of the primary vectors for African swine fever virus (ASFV) transmission among swine herds. However, the low concentrations of ASFV in water represent a...
Water is one of the primary vectors for African swine fever virus (ASFV) transmission among swine herds. However, the low concentrations of ASFV in water represent a challenge for the detection of the virus by conventional PCR methods, and enrichment of the virus would increase the test sensitivity. In this study, aiming to enrich ASFV in water quickly and efficiently, a rapid and efficient water-borne virus enrichment system (MDEF, modified diatomaceous earth by ferric hydroxide colloid) was used to enrich ASFV in water. After enrichment by MDEF, conventional real-time PCR (qPCR) was used for ASFV detection. ASFV were inactivated and diluted in 10 L of water, of which 4 mL were collected after 60 min treatment using the MDEF system. Two thousand five hundred times reduction of the sample volume was achieved after enrichment. A high adsorption rate of about 99.99 (±0.01)% and a high recovery rate of 64.01 (±10.20)% to 179.65 (±25.53)% was achieved by using 1g modified diatomaceous earth for 10 L ASFV contaminated water. The limit of qPCR detection of ASFV decreased to 1 × 10 GU ml (genomic units per milliliter) from 1 × 10 GU ml after concentrating the spiked water from 10 L to 4 ml. Preliminary application of MDEF allowed successful detection of African swine fever virus (ASFV), porcine circovirus type 2 (PCV2), and pseudorabies virus (PRV) in sewage. Thus, the combination of modified diatomaceous earth and real-time PCR is a promising strategy for the detection of viruses in water.
PubMed: 36619955
DOI: 10.3389/fvets.2022.1045190 -
Materials (Basel, Switzerland) Dec 2022Portland cement porous concrete (PCPC) has received immense interest recently due to its environmental aids. Its porous structure helps to reduce the water runoff amount...
Portland cement porous concrete (PCPC) has received immense interest recently due to its environmental aids. Its porous structure helps to reduce the water runoff amount while improving the recharge of groundwater. Earlier studies have concentrated on illustrating and knowing the functional as well as structural properties of PCPC. However, very few studies are available on PCPC in combination with natural silica sources as supplementary cementitious materials (SCMs). Most SCMs are by-products of industrial manufacturing processes and cause some environmental concerns, but with their pozzolanic effect, they could be utilized as partial substitute materials for ordinary Portland cement (OPC) to enhance the strength as well as durability performance. The aim of this study is to evaluate the effects of diatomaceous earth (DE) as a supplementary cementitious material for partial substitution of OPC for Portland cement porous concrete application. Compression strength, split tensile strength, and flexural strength tests were performed to determine the effect of partial replacement. To investigate the impact of test variables, basic tests, including void content and water permeability, were also performed. Compared to the control concrete, the results show that a 15% replacement of cement with DE significantly increased the compressive strength (by 53%) while also providing adequate porosity and better water permeability. Statistical analysis (ANOVA) and regression analysis showed that there is a significant (p < 0.05) growth within the physical characteristics of concrete upon the replacement of cement by 15% DE. Collectively, the replacement of cement with DE could not only improve the concrete strength but also reduce the consumption of cement, thereby lessening the cost of construction as well as indirectly reducing the carbon footprint.
PubMed: 36614394
DOI: 10.3390/ma16010048