-
Journal of Biomedical Materials... May 2024The bone formation response of ceramic bone graft materials can be improved by modifying the material's surface and composition. A unique dual-phase ceramic bone graft...
The bone formation response of ceramic bone graft materials can be improved by modifying the material's surface and composition. A unique dual-phase ceramic bone graft material with a nanocrystalline, hydroxycarbanoapatite (HCA) surface and a calcium carbonate core (TrelCor®-Biogennix, Irvine, CA) was characterized through a variety of analytical methods. Scanning electron microscopy (SEM) of the TrelCor surface (magnification 100-100,000X) clearly demonstrated a nanosized crystalline structure covering the entire surface. The surface morphology showed a hierarchical structure that included micron-sized spherulites fully covered by plate-like nanocrystals (<60 nm in thickness). Chemical and physical characterization of the material using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy Energy Dispersive X-ray Spectroscopy (SEM-EDX) showed a surface composed of HCA. Analysis of fractured samples confirmed the dual-phase composition with the presence of a calcium carbonate core and HCA surface. An in vitro bioactivity study was conducted to evaluate whether TrelCor would form a bioactive layer when immersed in simulated body fluid. This response was compared to a known bioactive material (45S5 bioactive glass - Bioglass). Following 14-days of immersion, surface and cross-sectional analysis via SEM-EDX showed that the TrelCor material elicited a bioactive response with the formation of a bioactive layer that was qualitatively thicker than the layer that formed on Bioglass. An in vivo sheep muscle pouch model was also conducted to evaluate the ability of the material to stimulate an ectopic, cellular bone formation response. Results were compared against Bioglass and a first-generation calcium phosphate ceramic that lacked a nanocrystalline surface. Histology and histomorphometric analysis (HMA) confirmed that the TrelCor nanocrystalline HCA surface stimulated a bone formation response in muscle (avg. 11% bone area) that was significantly greater than Bioglass (3%) and the smooth surface calcium phosphate ceramic (0%).
Topics: Animals; Bone Substitutes; Nanoparticles; Ceramics; Materials Testing; Durapatite; Sheep; Microscopy, Electron, Scanning; Spectroscopy, Fourier Transform Infrared; Surface Properties; X-Ray Diffraction; Bone Transplantation
PubMed: 38747324
DOI: 10.1002/jbm.b.35416 -
International Journal of Biological... Jun 20243D multifunctional scaffold has been designed based on Cs/SA/NS/NPHA. Nanoparticles hydroxyapatite (NPHA) was prepared via precipitation method of sodium dihydrogen...
3D multifunctional scaffold has been designed based on Cs/SA/NS/NPHA. Nanoparticles hydroxyapatite (NPHA) was prepared via precipitation method of sodium dihydrogen phosphate in presence calcium chloride. Different ratios of Chitosan (CS)/Sodium Alginate (SA) were used to prepare Cs/SA scaffolds in presence of CaCl as a cross linker. NPHA was incorporated in CS/SA scaffold and neomycin sulfate (NS) was added as an antimicrobial agent. The structure and surface morphology of the scaffolds were investigated via infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA) techniques. Additionally, Antimicrobial activity of the scaffold has evaluated against Gram- negative and Gram- positive bacteria. The result showed promising antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans. Furthermore, cytotoxicity against MG63 osteosarcoma cell and fibroblast normal cell line has investigated. The result showed anti-proliferative against MG63. DFT calculations and molecular docking were used to study the reactivity of the compounds. The results exhibited that Cs/SA/NS/NPHA is potent expected to be used in bone tissue regeneration.
Topics: Chitosan; Durapatite; Molecular Docking Simulation; Alginates; Neomycin; Anti-Infective Agents; Humans; Cell Proliferation; Tissue Scaffolds; Density Functional Theory; Microbial Sensitivity Tests
PubMed: 38744365
DOI: 10.1016/j.ijbiomac.2024.132297 -
Biomacromolecules Jun 2024The effective regeneration of large bone defects bone tissue engineering is challenging due to the difficulty in creating an osteogenic microenvironment. Inspired by...
The effective regeneration of large bone defects bone tissue engineering is challenging due to the difficulty in creating an osteogenic microenvironment. Inspired by the fibrillar architecture of the natural extracellular matrix, we developed a nanoscale bioengineering strategy to produce bone fibril-like composite scaffolds with enhanced osteogenic capability. To activate the surface for biofunctionalization, self-adaptive ridge-like nanolamellae were constructed on poly(ε-caprolactone) (PCL) electrospinning scaffolds surface-directed epitaxial crystallization. This unique nanotopography with a markedly increased specific surface area offered abundant nucleation sites for Ca recruitment, leading to a 5-fold greater deposition weight of hydroxyapatite than that of the pristine PCL scaffold under stimulated physiological conditions. Bone marrow mesenchymal stem cells (BMSCs) cultured on bone fibril-like scaffolds exhibited enhanced adhesion, proliferation, and osteogenic differentiation In a rat calvarial defect model, the bone fibril-like scaffold significantly accelerated bone regeneration, as evidenced by micro-CT, histological histological and immunofluorescence staining. This work provides the way for recapitulating the osteogenic microenvironment in tissue-engineered scaffolds for bone repair.
Topics: Animals; Tissue Scaffolds; Rats; Bone Regeneration; Mesenchymal Stem Cells; Osteogenesis; Tissue Engineering; Polyesters; Cell Differentiation; Rats, Sprague-Dawley; Biomimetic Materials; Cells, Cultured; Cell Proliferation; Skull; Durapatite
PubMed: 38743836
DOI: 10.1021/acs.biomac.4c00378 -
Journal of Biomedical Materials... May 2024Stress shielding is one of the major concerns for total ankle replacement implants nowadays, because it is responsible for implant-induced bone resorption. The bone...
A numerical investigation for the development of functionally graded Ti/HA tibial implant for total ankle replacement: Influence of material gradation law and volume fraction index.
Stress shielding is one of the major concerns for total ankle replacement implants nowadays, because it is responsible for implant-induced bone resorption. The bone resorption contributes to the aseptic loosening and failure of ankle implants in later stages. To reduce the stress shielding, improvements can be made in the implant material by decreasing the elastic mismatch between the implant and the tibia bone. This study proposes a new functionally graded material (FGM) based tibial implant for minimizing the problem of stress shielding. Three-dimensional finite element (FE) models of the intact tibia and the implanted tibiae were created to study the influence of material gradation law and volume fraction index on stress shielding and implant-bone micromotion. Different implant materials were considered that is, cobalt-chromium, titanium (Ti), and FGM with Ti at the bottom and hydroxyapatite (HA) at the top. The FE models of FGM implants were generated by using different volume fractions and the rule of mixtures. The rule of mixtures was used to calculate the FGM properties based on the local volume fraction. The volume fraction was defined by using exponential, power, and sigmoid laws. For the power and sigmoid law varying volume fraction indices (0.1, 0.2, 0.5, 1, 2, and 5) were considered. The geometry resembling STAR® ankle system tibial implant was considered for the present study. The results indicate that FGMs lower stress shielding but also marginally increase implant-bone micromotion; however, the values were within the acceptable limit for bone ingrowth. It is observed that the material gradation law and volume fraction index influence the performance of FGM tibial implants. The tibial implant composed of FGM using power law with a volume fraction index of 0.1 was the preferred option because it showed the least stress shielding.
Topics: Titanium; Tibia; Arthroplasty, Replacement, Ankle; Humans; Finite Element Analysis; Durapatite; Prosthesis Design; Stress, Mechanical; Materials Testing
PubMed: 38742468
DOI: 10.1002/jbm.b.35417 -
ACS Applied Materials & Interfaces May 2024Keratoprosthesis (KPro) implantation is frequently the only recourse for patients with severe corneal disease. However, problems arise due to inadequate biointegration...
Keratoprosthesis (KPro) implantation is frequently the only recourse for patients with severe corneal disease. However, problems arise due to inadequate biointegration of the KPro, particularly the PMMA optical cylinder, such as tissue detachment, tissue melting, or eye-threatening infection in the interface. Here, using the AuroKPro as a model prosthesis, a surface functionalization approach─coating the optical cylinder with nanohydroxyapatite (nHAp)─was trialed in rabbit eyes with and without a proceeding chemical injury. In chemically injured eyes, which simulated total limbal epithelial stem cell deficiency, clear benefits were conferred by the coating. The total modified Hackett-McDonald score and area of tissue apposition differences 12 weeks after implantation were 5.0 and 22.5%, respectively. Mechanical push-in tests revealed that 31.8% greater work was required to detach the tissues. These differences were less marked in uninjured eyes, which showed total score and tissue apposition differences of 2.5 and 11.5%, respectively, and a work difference of 23.5%. The improved biointegration could be contributed by the attenuated expression of fibronectin ( = 0.036), collagen 3A1 ( = 0.033), and α-smooth muscle actin ( = 0.045)─proteins typically upregulated during nonadherent fibrous capsule envelopment of bioinert material─adjacent to the optical cylinders. The coating also appeared to induce a less immunogenic milieu in the ocular surface tissue, evidenced by the markedly lower expression of tear proteins associated with immune and stimulus responses. Collectively, the level of these tear proteins in eyes with coated prostheses was 1.1 ± 13.0% of naïve eyes: substantially lower than with noncoated KPros (246.5 ± 79.3% of naïve, = 0.038). Together, our results indicated that nHAp coating may reduce the risk of prosthesis failure in severely injured eyes, which are representative of the cohort of KPro patients.
Topics: Rabbits; Animals; Durapatite; Corneal Diseases; Coated Materials, Biocompatible; Cornea; Prostheses and Implants; Fibrosis; Humans
PubMed: 38740379
DOI: 10.1021/acsami.4c04077 -
Scientific Reports May 2024The nucleation of carbonate-containing apatite on the biomaterials surface is regarded as a significant stage in bone healing process. In this regard, composites...
The nucleation of carbonate-containing apatite on the biomaterials surface is regarded as a significant stage in bone healing process. In this regard, composites contained hydroxyapatite (Ca(PO)(OH), HA), wollastonite (CaSiO, WS) and polyethersulfone (PES) were synthesized via a simple solvent casting technique. The in-vitro bioactivity of the prepared composite films with different weight ratios of HA and WS was studied by placing the samples in the simulated body fluid (SBF) for 21 days. The results indicated that the the surface of composites containing 2 wt% HA and 4 wt% WS was completely covered by a thick bone-like apatite layer, which was characterized by Grazing incidence X-ray diffraction, attenuated total reflectance-Fourier transform infrared spectrometer, field emission electron microscopy and energy dispersive X-ray analyzer (EDX). The degradation study of the samples showed that the concentration of inorganic particles could not influence the degradability of the polymeric matrix, where all samples expressed similar dexamethasone (DEX) release behavior. Moreover, the in-vitro cytotoxicity results indicated the significant cyto-compatibility of all specimens. Therefore, these findings revealed that the prepared composite films composed of PES, HA, WS and DEX could be regarded as promising bioactive candidates with low degradation rate for bone tissue engineering applications.
Topics: Durapatite; Nanocomposites; Bone Substitutes; Silicates; Biocompatible Materials; Calcium Compounds; Drug Liberation; Dexamethasone; Polymers; Humans; X-Ray Diffraction; Materials Testing; Spectroscopy, Fourier Transform Infrared; Animals
PubMed: 38734777
DOI: 10.1038/s41598-024-61586-2 -
International Journal of Molecular... Apr 2024The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone...
The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 μm as primary pores, 40-70 μm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.
Topics: Animals; Dogs; Tissue Scaffolds; Tibia; Pilot Projects; Bone Regeneration; Osteogenesis; Porosity; X-Ray Microtomography; Durapatite; Bone Transplantation; Bone Substitutes
PubMed: 38731827
DOI: 10.3390/ijms25094604 -
Molecules (Basel, Switzerland) Apr 2024This study delves into the physicochemical properties of inorganic hydroxyapatite (HAp) and hybrid hydroxyapatite-chitosan (HAp-CTS) granules, also gold-enriched, which...
This study delves into the physicochemical properties of inorganic hydroxyapatite (HAp) and hybrid hydroxyapatite-chitosan (HAp-CTS) granules, also gold-enriched, which can be used as aggregates in biomicroconcrete-type materials. The impact of granules' surface modifications with citric acid (CA) or polyethylene glycol (PEG) was assessed. Citric acid modification induced increased specific surface area and porosity in inorganic granules, contrasting with reduced parameters in hybrid granules. PEG modification resulted in a slight increase in specific surface area for inorganic granules and a substantial rise for hybrid granules with gold nanoparticles. Varied effects on open porosity were observed based on granule type. Microstructural analysis revealed increased roughness for inorganic granules post CA modification, while hybrid granules exhibited smoother surfaces. Novel biomicroconcretes, based on α-tricalcium phosphate (α-TCP) calcium phosphate cement and developed granules as aggregates within, were evaluated for compressive strength. Compressive strength assessments showcased significant enhancement with PEG modification, emphasizing its positive impact. Citric acid modification demonstrated variable effects, depending on granule composition. The incorporation of gold nanoparticles further enriched the multifaceted approach to enhancing calcium phosphate-based biomaterials for potential biomedical applications. This study demonstrates the pivotal role of surface modifications in tailoring the physicochemical properties of granules, paving the way for advanced biomicroconcretes with improved compressive strength for diverse biomedical applications.
Topics: Citric Acid; Durapatite; Polyethylene Glycols; Gold; Biocompatible Materials; Materials Testing; Chitosan; Porosity; Metal Nanoparticles; Chemical Phenomena; Compressive Strength; Surface Properties
PubMed: 38731508
DOI: 10.3390/molecules29092018 -
Acta Biomaterialia Jun 2024The treatment of full-thickness skin injuries complicated by severe infection is hampered by the lack of comprehensive solutions that can regulate the various stages of...
The treatment of full-thickness skin injuries complicated by severe infection is hampered by the lack of comprehensive solutions that can regulate the various stages of wound healing. Consequently, there is an urgent need for a multifunctional dressing capable of multi-level regulation. In this study, we propose a novel solution by covalently integrating ε-poly-l-lysine-grafted gallic acid (EG) and in situ bioreduced silver nanoparticles (AgNPs) onto nano-hydroxyapatite (nHAP), thereby developing a multi-layered, multifunctional nanoplatform (nHEA). Cell experiments have shown that, compared to nHAP and nHAP loaded only with EG (nHEG), the addition of AgNPs to nHEA confers excellent antibacterial properties while maintaining optimal biocompatibility. The incorporation of EG onto nHEG and nHEA imparts antioxidation, anti-inflammatory, and pro-angiogenic functions, and the release of Ca and EG further enhances fibroblast migration and collagen secretion. In a rat model of full-thickness skin injury with severe infection, nHEA demonstrates remarkable antibacterial and anti-inflammatory effects, along with promoting collagen remodeling and regeneration. Together, both cell experiments and animal studies confirm the significant potential of this innovative multifunctional nanoplatform in the treatment of full-thickness skin injuries with severe infection. STATEMENT OF SIGNIFICANCE: Treating infected full-thickness skin injuries poses a longstanding challenge due to the lack of comprehensive solutions that can regulate different stages of wound healing. This study introduces a novel multifunctional nanoplatform, nHEA, developed by covalently integrating ε-poly-l-lysine grafted with gallic acid (EG) and in situ bioreduced AgNPs onto nano-hydroxyapatite (nHAP). Cell experiments reveal that the integration of AgNPs enhances nHEA's antibacterial performance while maintaining optimal biocompatibility. The inclusion of EG bestows antioxidant, inflammation-regulating, and angiogenetic properties upon nHEA, and the release of Ca and EG stimulates the migration and collagen secretion of fibroblast cells. Consequently, nHEA exhibits superior antibacterial and inflammation-regulating efficacy, and stimulates collagen remodeling and regeneration in vivo, making it a promising treatment for severely infected skin injuries.
Topics: Animals; Durapatite; Skin; Anti-Bacterial Agents; Gallic Acid; Wound Healing; Rats; Rats, Sprague-Dawley; Humans; Silver; Metal Nanoparticles; Male; Mice
PubMed: 38729546
DOI: 10.1016/j.actbio.2024.05.005 -
Photodiagnosis and Photodynamic Therapy Jun 2024Different remineralizing pretreatments Casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF), tricalcium phosphate fluoride (TCP-F), self-assembling...
Remineralizing pretreatment using casein phosphopeptide-amorphous calcium phosphate fluoride, self-assembling peptide, and nanohydroxyapatite gel activation via invisible infrared light on the dentin microhardness and micro shear bond strength to the composite restoration.
AIM
Different remineralizing pretreatments Casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF), tricalcium phosphate fluoride (TCP-F), self-assembling peptide (SAP) P11-4 and 10 % Nanohydroxyapatite (nHA) gel activation via invisible infrared light on the dentin microhardness (MH) and micro shear bond strength (µSBS) of composite restoration.
METHODS
Seventy-five human molar teeth were collected and the dentinal surface of all the samples was exposed to different demineralizing solutions. (n = 15) Group 1 (demineralized dentin), Group 2 (CPP ACP), Group 3 (TCP-F), Group 4 (SAP P11-4), Group 5 (nHA gel activation via invisible infrared light). MH assessment was performed using Vickers hardness. Each group of 10 samples was subjected to composite restoration buildup and µSBS were tested. The debonded samples were then observed under a stereo-microscope for failure analysis. ANOVA was conducted, along with Tukey's post hoc analysis, to examine the µSBS of composite and MH of the remineralized surface.
RESULTS
nHA gel activation via invisible infrared light pretreated specimens showed the maximum outcomes of surface hardness (331.2 ± 77.3) and bond strength (10.38 ± 2.77). However, Group 4 (SAP P11-4) (148.3 ± 29.2) remineralized dentin displayed minimum scores of MH and µSBS (5.88 ± 1.01).
CONCLUSION
Remineralizing pretreatment nHA gel activation via invisible infrared light and casein phosphopeptide-amorphous calcium phosphate fluoride seem to improve the dentin MH and µSBS of the composite restoration.
Topics: Caseins; Humans; Tooth Remineralization; Dentin; Hardness; Infrared Rays; Shear Strength; Durapatite; Molar; Calcium Phosphates; Dental Restoration, Permanent
PubMed: 38729233
DOI: 10.1016/j.pdpdt.2024.104210