-
International Orthodontics May 2024The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign®...
OBJECTIVE
The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign® aligners (Align Technology, San Jose, California) with those planned by orthodontists via its ClinCheck® digital treatment planning facility.
METHODS
Data provided by Align regarding patients who had completed an initial series of Invisalign® aligner treatment and were less than 18-years old were assessed in relation to pre-treatment, planned and achieved overjet and overbite measurements. Descriptive statistics, Wilcoxon rank-sum, Mann Whitney calculations were computed.
RESULTS
A total of 290 patients satisfied inclusion criteria. The median (interquartile range (IQR)) age was 14.17 (13,15.42) years. The median achieved overjet and overbite changes were less than those planned (p<0.01) with 53.33% of the planned median overjet increase achieved and 52.94% of planned median overjet reduction achieved. Additionally, 58.33% of the planned median overbite increase was achieved and 55.55% of the planned median overbite reduction was achieved. A total of 21.52% patients recorded no change or an increase from pre-treatment to the achieved overjet where reduction was planned, whereas 41.67% recorded no change or a reduction in overjet where increase was planned. A total of 18.72% recorded no change or an increase in overbite where reduction was planned, whereas 20.75% recorded no change or a reduction in overbite where increase was planned.
CONCLUSIONS
Less than 60% of the planned overjet and overbite changes per patient were achieved. Between 18.72 and 41.67% of patients experienced no change or changes in overjet and overbite in the opposite direction to that planned. This is likely to be clinically significant.
PubMed: 38805975
DOI: 10.1016/j.ortho.2024.100888 -
International Journal of Dentistry 2024Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and...
BACKGROUND
Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and treating occlusal problems and their potential consequences on TMD.
OBJECTIVES
To investigate the relationship of occlusal features and some of the TMD parameters. . The current cross-sectional study was conducted on 200 TMD patients seeking dental treatment at different dental centers in Baghdad city, aged 18-35 years. All participants underwent assessment for occlusal features, which were molar and canine classifications, overjet, posterior buccal or lingual crossbites, and overbites, and TMD parameters (muscle pain, TMJ pain, and clicking) using the Chi-square test for statistical analysis.
RESULTS
Regarding molar classification, there were strong positive correlations between subjects with TMD and having different molar classifications (class I, II, and III) bilaterally or unilaterally; furthermore, there were strong positive correlations between subjects with TMD and having different canine classifications. Moreover, there were significant correlations between subjects with increased, normal, or decreased overjet and the TMD parameters. In addition, there were weak positive correlations between TMD occurrence and buccal or lingual posterior crossbite. On the other hand, there were significant correlations between subjects with a decreased overbite and the presence of TMD parameters.
CONCLUSION
TMD had a multifactorial background rather than dependability on a specific molar or canine classification type. There was also a correlation between overjet and TMD muscle pain, while decreased overbite was correlated to muscle and TMJ pain. Conversely, there is no vital correlation between posterior buccal or lingual crossbite occurrence and TMD parameters.
PubMed: 38798761
DOI: 10.1155/2024/8715166 -
Journal of Clinical Medicine May 2024This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The...
This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The research sought to understand how the COS's anatomical dimensions correlate with different classes of malocclusion and the position of the frontal teeth. A total of 265 participants from the Dentistry Ambulatory of the Military Hospital of Sibiu were included in this study. It employed digital intraoral scanning technology to measure the COS, overjet, and overbite, with malocclusion classification. Statistical analyses, including correlation and regression, were conducted to examine the relationships between COS depth, frontal teeth position, and malocclusion characteristics. The average COS depth measured was 1.0564 mm, presenting variability when compared to existing literature. Most of the study participants had Class I malocclusion. A significant positive correlation between COS depth and overjet was identified, with no notable gender-based differences in these occlusal parameters. The findings affirm the integral role of COS in occlusal dynamics and malocclusion diagnosis. The COS measurement of a mean of 1.0564 mm, when compared to other results emphasizes the differences in occlusal curvature among various populations. The results contribute to a refined understanding of occlusal relationships, supporting the need for personalized orthodontic and prosthetic treatments based on precise anatomical measurements.
PubMed: 38792296
DOI: 10.3390/jcm13102750 -
Journal of Clinical Medicine May 2024We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent...
We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.
PubMed: 38792293
DOI: 10.3390/jcm13102753 -
Biomimetics (Basel, Switzerland) May 2024An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical...
An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical advantage. The following case report concerns the Biga system, a strategy that supports orthodontists during class II corrections and vertical control through treatment. A 12-year-old girl with a high angle of skeletal class II was selected. A novel biomechanical strategy was effectively applied using two tads on the upper arch to obtain sequential distalization of the upper teeth and to correct the lower arch spee curve using third-class elastics. Eventually, on the same tads, a double cantilever was applied to control the overbite and intrusion during incisors' retraction. The Biga system is an easy biomechanical strategy that ensures the three-dimensional control of treatment mechanics in class II patients.
PubMed: 38786515
DOI: 10.3390/biomimetics9050305 -
Orthodontics & Craniofacial Research May 2024The extraction decision significantly affects the treatment process and outcome. Therefore, it is crucial to make this decision with a more objective and standardized...
INTRODUCTION
The extraction decision significantly affects the treatment process and outcome. Therefore, it is crucial to make this decision with a more objective and standardized method. The objectives of this study were (1) to identify the best-performing model among seven machine learning (ML) models, which will standardize the extraction decision and serve as a guide for inexperienced clinicians, and (2) to determine the important variables for the extraction decision.
METHODS
This study included 1000 patients who received orthodontic treatment with or without extraction (500 extraction and 500 non-extraction). The success criteria of the study were the decisions made by the four experienced orthodontists. Seven ML models were trained using 36 variables; including demographic information, cephalometric and model measurements. First, the extraction decision was performed, and then the extraction type was identified. Accuracy and area under the curve (AUC) of the receiver operating characteristics (ROC) curve were used to measure the success of ML models.
RESULTS
The Stacking Classifier model, which consists of Gradient Boosted Trees, Support Vector Machine, and Random Forest models, showed the highest performance in extraction decision with 91.2% AUC. The most important features determining extraction decision were maxillary and mandibular arch length discrepancy, Wits Appraisal, and ANS-Me length. Likewise, the Stacking Classifier showed the highest performance with 76.3% accuracy in extraction type decisions. The most important variables for the extraction type decision were mandibular arch length discrepancy, Class I molar relationship, cephalometric overbite, Wits Appraisal, and L1-NB distance.
CONCLUSION
The Stacking Classifier model exhibited the best performance for the extraction decision. While ML models showed a high performance in extraction decision, they could not able to achieve the same level of performance in extraction type decision.
PubMed: 38764408
DOI: 10.1111/ocr.12811 -
BMC Oral Health May 2024Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its...
BACKGROUND
Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its application to skeletal discrepancy may result in unsatisfactory tooth inclination. This study aimed to construct a novel appliance with overjet design to avoid this side effect and investigated its shape and mechanical changes under occlusion using three-dimensional finite element method.
METHODS
We established three samples of prefabricated myofunctional appliances. The first one was edge to edge without overjet, and the outer shield of both jaws were flattened. The second one was 3 mm overjet with stepped the outer shield. The last one was 3 mm overjet, and the outer shield of both jaws were flatted, which meant the front wall of lower jaw was strengthened with bumper, termed as lower bumper. A complete dentition model was applied to the study. 150 N occlusal force was applied to each type of appliance and the deformation displacement and the changes in stress was recorded.
RESULTS
The deformation was significant in the incisors regions, especially in the vertical and lateral dimensions. The maximum displacements of 3 mm overjet with step shield group were 7.08 mm (vertical), 3.99 mm (lateral), and 2.90 mm (sagittal), while it decreased to 3.92 mm(vertical), 1.94 mm (lateral), and 1.55 mm (sagittal) in overjet with bumper group. Moreover, the upper molar regions exhibited higher vertical and sagittal displacement in 3 mm overjet with step shield group, which were 3.03 mm (vertical) and 1.99 mm (sagittal), and the bumper design could decrease the maximum displacement to 1.72 mm (vertical) and 0.72 mm (sagittal). In addition, the Von Mises stress of appliances was analyzed, and results indicated that 3 mm overjet with step shield generated higher stress than other groups, with the maximum Von Mises stress was 0.9387 MP, which were 0.5858 and 0.5657 MP in edge to edge group and 3 mm overjet with lower bumper group, respectively.
CONCLUSION
The prefabricated myofunctional appliances may cause deformation during occlusion. Compared to step shield group, the application of lower bumper exhibited better resistance to occlusal force.
Topics: Finite Element Analysis; Humans; Orthodontic Appliance Design; Myofunctional Therapy; Bite Force; Imaging, Three-Dimensional; Overbite; Stress, Mechanical; Mandible; Incisor; Biomechanical Phenomena
PubMed: 38745284
DOI: 10.1186/s12903-024-04325-3 -
International Dental Journal May 2024Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of...
INTRODUCTION
Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of failure and cracking of braces should be considered. Therefore, the aim of the present study was to compare the failure rates of ceramic and metal brackets in a 12-month clinical study.
METHODS
Eighty patients undergoing fixed orthodontic treatment with vestibular appliances were enrolled and divided into 2 equal groups: MET for metal brackets and CER for ceramic brackets. After bonding, bracket failures were recorded for 12 months, along with the archwire placed at the time of failure. Angle's dental class, skeletal class, Wits appraisal, Little's irregularity index, overjet, overbite, age, and gender of the patients were recorded from pretreatment cephalometric tracings and study casts. The data were statistically analysed (P < .05).
RESULTS
Significantly higher failure rates were found for ceramic brackets in the overall analysis, in the mandibular arch, and in the posterior region. Regression analysis revealed a significant influence of round nickel-titanium archwires on higher failure rates, whilst a significant influence of rectangular archwires was found on lower failure rates.
CONCLUSIONS
Ceramic brackets showed higher failure rates. Patients should be aware that orthodontic treatment with ceramic brackets may involve delays and inconvenience due to the higher failure rate compared to metal brackets.
PubMed: 38744578
DOI: 10.1016/j.identj.2024.04.023 -
The Saudi Dental Journal Apr 2024The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the...
INTRODUCTION
The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the association between the VSP and various factors including type of birth, gender, tongue posture, lip incompetence, eruption of primary molars, habits and the presence of malocclusions in children with primary and early mixed dentition.
MATERIAL AND METHOD
A total of 219 children (102 boys and 117 girls) were evaluated using a combination of a questionnaire and a structured clinical examination by one pediatric specialist dentist. Kittel's method of tongue posture evaluation and the Payne technique for assessment of swallowing pattern were included in the clinical examination of myofunctional status. After checking for normality, normal and non-normal distributed data were analyzed using two-sample -test and Mann-Whitney test, respectively. Analysis of categorical variables was done using a chi-square test, and Bonferroni correction was used as correction for multiple comparisons.
RESULTS
A total of 56.2 % of the study population had a VSP. The chi-square test indicated a statistically significant higher presence of VSP in male gender. Statistically significant associations were seen between the VSP and lip incompetency, pathologic resting tongue position, habits, anterior open bite and increased overjet. On the other hand, no statistically significant associations were found between VSP and children's age within the sample population, type of birth, uni- or bilateral crossbites, increased overbite, edge-to-edge anterior bite or completion of eruption of primary molars and/or permanent incisors.
CONCLUSIONS
The association between VSP and male gender, pathologic tongue posture, lip incompetency and habits and occlusal traits such as anterior open bite and increased anterior overjet is supported by the results of the present study.
PubMed: 38690392
DOI: 10.1016/j.sdentj.2024.01.001 -
The Saudi Dental Journal Apr 2024This study investigated the prevalence of maxillary labial frenum morphologies and attachment types and their associations with various patient-related clinical...
OBJECTIVE
This study investigated the prevalence of maxillary labial frenum morphologies and attachment types and their associations with various patient-related clinical variables in a population of Saudi Arabian adults.
METHODS
This study comprehensively examined 100 participants of both genders to categorize frenum types and attachment sites. The following clinical variables were recorded: probing depth, clinical attachment loss, attached gingiva width, overjet, overbite, diastema width, central incisor condition, occlusion, previous orthodontic treatment, and the incidence of gummy smile.
RESULTS
The mean age was 32.6 years, and the average diastema width was 0.23 mm. The study found that the simple frenum type was the most common morphology (57 %), and gingival attachment was the most frequent attachment type (54 %). Simple frenum was significantly associated with class I occlusion (p = 0.018), and frenum with nichum was significantly associated with class II occlusion (p = 0.019). Females were more likely to exhibit simple frenum with nodule frenum than males (p = 0.042). Mucosal frenum attachment was significantly correlated with the absence of previous orthodontic treatment (p = 0.042).
CONCLUSION
The study identified a relationship between the features of the maxillary labial frenum and occlusion as well as previous orthodontic treatment. Our findings suggest that understanding each patient's unique frenum features can lead to more effective and personalized dental care, thus improving patient satisfaction.
PubMed: 38690391
DOI: 10.1016/j.sdentj.2024.02.002