-
Journal of Prosthodontic Research Jan 2023Various oral rehabilitation approaches are available for severely worn dentition. However, evidence-based guidelines for permanent treatment are limited. This review...
PURPOSE
Various oral rehabilitation approaches are available for severely worn dentition. However, evidence-based guidelines for permanent treatment are limited. This review aims to investigate clinical observational findings and compare in-vitro outcomes of thin and ultrathin occlusal veneers using different materials and approaches.
METHODS
An electronic search of online databases, such as PubMed (MEDLINE), BioMed Central (BMC), Cochrane, and Scopus, was performed for the 2009 - Jun 2021 period, following the PRISMA 2020 criteria. The reports sought for retrieval were all the articles evaluating the clinical outcomes of permanent full-mouth rehabilitation, and all in-vitro records that investigated and compared fracture strength, survival rate, and modes of failure of ultrathin (0.3 - 0.6 mm), thin (0.5 - 0.8 mm), and thick (0.8-1.5 mm) occlusal veneer restorations, with regard to the available indirect restorative materials. The Newcastle Ottawa risk of bias criteria was used to judge the clinical studies and a modified consort statement was used for the evaluation of in-vitro studies. The data of the included studies were extracted and grouped based on the similarity of the outcomes and study protocols. Data heterogeneity determined the qualitative and quantitative grouping of the results.
RESULTS
Two clinical and 17 in-vitro studies were included. Data exhibited heterogeneity within the materials, variables, testing protocols and observation periods. Therefore, only qualitative synthesis of the results was feasible. Clinically used 1 mm lithium disilicate overlays and ultrathin one-step no-prep polymer infiltrated ceramic network (PICN) occlusal veneers exhibited very high success and survival rates. The analysis of in-vitro studies exhibited variable survival rates and fracture load values, based on materials, thickness, and restorative approaches used.
CONCLUSIONS
Within the limitations of this systematic review, it can be concluded that the clinical outcomes of thin and ultrathin occlusal veneers/overlays are auspicious. In-vitro experimental results support the usage of the thin and ultrathin occlusal veneers.
Topics: Survival Rate; Materials Testing; Dental Veneers; Dental Porcelain; Ceramics; Dental Materials; Dental Stress Analysis; Computer-Aided Design
PubMed: 35545532
DOI: 10.2186/jpr.JPR_D_21_00270 -
Clinical Oral Investigations May 2022To evaluate clinical performance of the new CAD/CAM resin-matrix ceramics and compare it with ceramic partial coverage restorations. (Review)
Review
OBJECTIVE
To evaluate clinical performance of the new CAD/CAM resin-matrix ceramics and compare it with ceramic partial coverage restorations.
MATERIALS AND METHODS
An electronic search of 3 databases (The National Library of Medicine (MEDLINE/PubMed), Scopus, and the Cochrane Central Register of Controlled Trials) was conducted. English clinical studies published between 2005 and September 2020 that evaluated the clinical performance of CAD/CAM resin-matrix ceramics inlays, onlays, or overlays were selected. The primary clinical question was applied according to PICOS strategy (Population, Intervention, Comparison, Outcome, Study design). The included studies were individually evaluated for risk of bias according to the modified Cochrane Collaboration tool criteria.
RESULTS
A total of 7 studies were included according to the established inclusion and exclusion criteria. From the included studies, 6 were randomized clinical trials while one study was longitudinal observational study without control group. According to the results of the included studies, the success rate of CAD/CAM resin-based composite ranged from 85.7 to 100% whereas the success rate reported for ceramic partial coverage restorations ranged from 93.3 to 100%. Fractures and debondings are found to be the most common cause of restorations failure.
CONCLUSION
CAD/CAM resin-based composite can be considered a reliable material for partial coverage restorations with clinical performance similar to glass ceramic restorations. However, this result needs to be confirmed in long-term evaluations.
CLINICAL RELEVANCE
CAD/CAM resin-based composites provide a potential alternative to ceramic indirect restorations. However, clinicians must be aware of the lake of knowledge regarding long-term outcome.
Topics: Ceramics; Composite Resins; Computer-Aided Design; Dental Materials; Dental Porcelain; Inlays; Longitudinal Studies; Observational Studies as Topic
PubMed: 35320383
DOI: 10.1007/s00784-022-04449-2 -
Bioengineering (Basel, Switzerland) Jan 2022: There has been an increase in demand for orthodontic treatment within the adult population, who likely receive restorative treatments using ceramic structures. The... (Review)
Review
: There has been an increase in demand for orthodontic treatment within the adult population, who likely receive restorative treatments using ceramic structures. The current state of the art regarding the most effective method to achieve an appropriate bond strength of brackets on ceramic surfaces isn't consensual. This systematic review aims to compare the available surface treatments to ceramics and determine the one that allows to obtain the best bond strength. : This systematic review followed the PRISMA guidelines and the PICO methodology was used, with the question "What is the most effective technique for bonding brackets on ceramic crowns or veneers?". The research was carried out in PubMed, Web of Science, Embase and Cochrane Library databases. In vitro and ex vivo studies were included. The methodological quality was evaluated using the guidelines for reporting of preclinical studies on dental materials by Faggion Jr. : A total of 655 articles searched in various databases were initially scrutinized. Sevety one articles were chosen for quality analysis. The risk of bias was considered medium to high in most studies. The use of hydrofluoric acid (HF), silane and laser afforded the overall best results. HF and HF plus laser achieved significantly highest bond strength scores in felsdphatic porcelain, while laser was the best treatment in lithium disilicate ceramics. : The most effective technique for bonding brackets on ceramic is dependent on the type of ceramic.
PubMed: 35049723
DOI: 10.3390/bioengineering9010014 -
BioMed Research International 2022Despite the importance of identifying proper novel porcelain preparation techniques to improve bonding of orthodontic brackets to porcelain surfaces, and despite the... (Meta-Analysis)
Meta-Analysis
BACKGROUND
Despite the importance of identifying proper novel porcelain preparation techniques to improve bonding of orthodontic brackets to porcelain surfaces, and despite the highly controversial results on this subject, no systematic review or meta-analysis exists in this regard.
OBJECTIVE
To comparatively summarize the effects of all the available porcelain surface treatments on the shear bond strength (SBS) and adhesive remnant index (ARI) of orthodontic brackets (metal, ceramic, polycarbonate) bonded to feldspathic porcelain restorations. . A search was conducted for articles published between January 1990 and February 2021 in PubMed, MeSH, Scopus, Web of Science, Cochrane, Google Scholar, and reference lists. . English-language articles comparing SBS of feldspathic porcelain's surface preparation methods for metal/ceramic/polycarbonate orthodontic brackets were included. Articles comparing silanes/bonding agents/primers without assessing roughening techniques were excluded. . Studies were summarized and risk of bias assessed. Each treatment's SBS was compared with the 6 and 10 MPa recommended thresholds. Studies including comparator (HF [hydrofluoric acid] + silane + bonding) were candidates for meta-analysis. ARI scores were dichotomized. Fixed- and random-effects models were used and forest plots drawn. Egger regressions and/or funnel plots were used to assess publication biases.
RESULTS
Thirty-two studies were included (140 groups of SBS, 82 groups of ARI). Bond strengths of 21 studies were meta-analyzed (64 comparisons in 14 meta-analyses). ARIs of 12 articles were meta-analyzed (28 comparisons in 8 meta-analyses). Certain protocols provided bond strengths poorer than HF + silane + bonding: "abrasion + bonding, diamond bur + bonding, HF + bonding, Nd:YAG laser (1 W) + silane + bonding, CO laser (2 W/2 Hz) + silane + bonding, and phosphoric acid + silane + bonding." Abrasion + HF + silane + bonding might act almost better than HF + silane + bonding. Abrasion + silane + bonding yields controversial results, being slightly (marginally significantly) better than HF + silane + bonding. Some protocols had controversial results with their overall effects being close to HF + silane + bonding: "Cojet + silane + bonding, diamond bur + silane + bonding, Er:YAG laser (1.6 W/20 Hz) + silane + bonding." Few methods provided bond strengths similar to HF + silane + bonding without much controversy: "Nd:YAG laser (2 W) + silane + bonding" and "phosphoric acid + silane + bonding" (in ceramic brackets). ARIs were either similar to HF + silane + bonding or relatively skewed towards the "no resin on porcelain" end. The risk of bias was rather low. . All the found studies were in vitro and thus not easily translatable to clinical conditions. Many metasamples were small.
CONCLUSIONS
The preparation methods HF + silane + bonding, abrasion + HF + silane + bonding, Nd:YAG (2 W) + silane + bonding, and phosphoric acid + silane + bonding (in ceramic brackets) might provide stronger bonds.
Topics: Dental Porcelain; Humans; Materials Testing; Orthodontic Brackets; Shear Strength; Surface Properties
PubMed: 35036438
DOI: 10.1155/2022/8246980 -
Journal of Prosthodontic Research Oct 2022This study systematically reviewed the literature to compare the bond strength of resin composites with that of zirconia-reinforced lithium silicate (ZLS) and lithium... (Meta-Analysis)
Meta-Analysis
PURPOSE
This study systematically reviewed the literature to compare the bond strength of resin composites with that of zirconia-reinforced lithium silicate (ZLS) and lithium disilicate (LD).
STUDY SELECTION
This review was structured based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA 2020) statement. This study was registered at the International Prospective Register of Systematic Reviews (CRD42021256900). Studies were searched via PubMed, Web of Science, and Google Scholar databases without language or publication year limits. In vitro studies that evaluated the bond strength of the resin composites to ZLS and LD were included. The risk of bias in all the included articles was evaluated. Statistical analyses were performed using the Review Manager software (version 5.3, Cochrane Collaboration, Oxford, UK).
RESULTS
Of the 90 potentially related articles, the full texts of 16 articles were evaluated after screening. Finally, seven studies were included in the qualitative synthesis and meta-analysis. All the studies presented a medium risk of bias. The results showed no significant difference in bond strength between the ZLS and LD groups (P = 0.94, mean difference=0.08, and 95% confidence interval=-1.93 to 2.10). However, a significant difference was found in the subgroup analysis considering different types of aging treatments (P = 0.0008) and different types of bond strength tests (P < 0.00001).
CONCLUSION
The bond strength of resin composites was found to be similar to that of ZLS and LD, but different aging treatments and bond strength tests exhibited varying effects on the bond strength.
Topics: Ceramics; Composite Resins; Dental Porcelain; Dental Stress Analysis; Lithium; Materials Testing; Resin Cements; Silicates; Surface Properties; Zirconium
PubMed: 34853237
DOI: 10.2186/jpr.JPR_D_20_00112 -
Clinical Oral Implants Research Jan 2022To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants. (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants.
MATERIALS AND METHODS
Based on a focused question and customized PICO framework, electronic (Medline/EMBASE/Cochrane) and manual searches for studies reporting the clinical outcomes of all-ceramic SCs and FDPs supported by ceramic implants ≥12 months were performed. The primary outcomes were reconstruction survival and the chipping proportion. The secondary outcomes were implant survival, technical complications, and patient-related outcome measurements. Meta-analyses were performed after 1, 2, and 5 years using random-effect meta-analyses.
RESULTS
Eight of the 1,403 initially screened titles and 55 full texts were included. Five reported on monolithic lithium disilicate (LS2) SCs, one on veneered zirconia SCs, and two on veneered zirconia SCs and FDPs, which reported all on cement-retained reconstructions (mean observation: 12.0-61.0 months). Meta-analyses estimated a 5-year survival rate of 94% (95% confidence interval [CI]: 82%-100%) for overall implant survival. Reconstruction survival proportions after 5 years were: monolithic LS2, 100% (95%CI: 95%-100%); veneered zirconia SCs, 89% (95%CI: 62%-100%); and veneered zirconia FDPs 94% (95%CI: 81%-100%). The chipping proportion after 5 years was: monolithic LS2, 2% (95%CI: 0%-11%); veneered zirconia SCs, 38% (95%CI: 24%-54%); and veneered zirconia FDPs, 57% (95%CI: 38%-76%). Further outcomes were summarized descriptively.
CONCLUSIONS
Due to the limited data available, only tendencies could be identified. All-ceramic reconstructions supported by ceramic implants demonstrated promising survival rates after mid-term observation. However, high chipping proportions of veneered zirconia SCs and, particularly, FDPs diminished the overall outcome. Monolithic LS2 demonstrated fewer clinical complications. Monolithic reconstructions could be a valid treatment option for ceramic implants.
Topics: Ceramics; Crowns; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Humans; Metal Ceramic Alloys; Zirconium
PubMed: 34665900
DOI: 10.1111/clr.13871 -
Journal of International Society of... 2020Dental implants are considered the best treatment option for replacement of missing teeth due to high survival rates and diverse applications. However, not all dental... (Review)
Review
BACKGROUND
Dental implants are considered the best treatment option for replacement of missing teeth due to high survival rates and diverse applications. However, not all dental implant therapies are successful and some fail due to various biological and or/mechanical factors. The objective of this study was to systematically review primary studies that focus on the biomechanical properties of dental implants in order to determine which biomechanical properties are most important for success of dental implant therapy.
MATERIALS AND METHODS
An electronic database search was performed using MEDLINE (PubMed), EMBASE, Google Scholar, and CAB Abstracts. Six principal biomechanical properties were considered to prepare the search strategy for each database using key words and Boolean operators. Human and animal studies (observational studies, trials, and studies) were included in this review. Human studies that were considered eligible needed to have subjects above 18 years who received permanent restorations after implant surgery and followed up for at least 6 months after receiving permanent restorations. Studies with subjects who had absolute contraindications at the time of dental implant surgery were excluded.
RESULTS
In total, 28 studies were included in the review after application of the eligibility criteria; 18 studies, 5 cohort clinical studies, 3 animal studies, and 2 nonrandomized trials. Six studies assessed loss of preload, five studies assessed fatigue strength, four assessed implant abutment connection design, and one assessed implant diameter. Two nonrandomized trials assessed torque and six observational studies assessed the effect of cantilevers. Gold alloy coating of abutment screws resulted in higher preload values followed by titanium alloy coating and gold coating; there was a difference in preload values between coated and uncoated screws when tightened repeatedly. Preload values decreased as a function of time with majority of preload loss occurred within 10s of tightening. The 8-degree internal conical implant performed better than the internal hex design. Higher rate of complications (porcelain chipping, de-cementation) was observed in the cantilever groups in studies.
CONCLUSION
Biomechanical properties of implants like preload, torque, cantilever design, implant abutment design have profound effects on the survival rates of dental implants. With limiations, this review provides some important parameters to consider for successful implant therapy.
PubMed: 33437702
DOI: 10.4103/jispcd.JISPCD_138_20 -
European Journal of Dentistry May 2021The aim of this systematic review was to analyze and compare the most up-to-date information available on long-term, medium-term, and short-term survival rates of...
The aim of this systematic review was to analyze and compare the most up-to-date information available on long-term, medium-term, and short-term survival rates of porcelain laminate veneers (PLVs) and investigate the homogeneity in current studies or lack of it. An electronic search was performed using PubMed, Ovid MEDLINE, Cochrane Library, Web of Science, EBSCO, Science Direct, Wiley, and Scopus databases. Based on the PRISMA guidelines, the main inclusion criteria consisted of research articles published after the year 2000, studies with a follow-up period of at least 1 year and reporting of the Kaplan-Meier estimated cumulative survival rates. Quality assessment of the included studies was performed using the modified systematic assessment list consisting of 24 items. Thirty full-text articles were reviewed in detail. A total of 30 articles met the inclusion criteria and were selected for qualitative synthesis. The remaining 27 publications were retained to discuss the heterogeneity in the current literature and reported longevity of veneer restorations. A conclusive estimation of the longevity of PLVS beyond 20 years is lacking. The availability of evidence in the current literature is limited in terms of sample size and duration of follow-up. However, the majority of studies have concluded that PLVs have high-success rates and predictable patient outcomes. The present literature indicates an increased heterogeneity among research study designs. Researchers should aim for homogeneous study designs that can be included in systematic reviews and meta-analyses.
PubMed: 33003243
DOI: 10.1055/s-0040-1715914 -
Dental and Medical Problems 2020The use of ceramic materials and the computer-aided design/computer-aided manufacturing (CAD/CAM) technology for the fabrication of complete-coverage restorations has...
The use of ceramic materials and the computer-aided design/computer-aided manufacturing (CAD/CAM) technology for the fabrication of complete-coverage restorations has significantly increased in the last decade. The aim of this study was to evaluate the survival rate of anterior and posterior monolithic and bilayered lithium disilicate glass-ceramic (LDGC) CAD/CAM crowns, and to identify the types of complications associated with the main clinical outcomes reported in clinical trials. MEDLINE/PubMed, Embase, Scopus, Web of Science, Cochrane Library, and ClinicalTrials.gov were searched by 2 independent reviewers for clinical studies published between 2006 and 2019, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The electronic search was supplemented by a hand search. Quality assessment for the included studies was performed. Qualitative and quantitative data was extracted from each study. Out of 219 studies, 6 studies that evaluated LDGC CAD/CAM crowns were identified and used for data extraction. The included studies had 154 participants, who received 204 crowns. The shortto medium-term survival and success rates were high. Biological complications occurred more frequently than technical complications. No esthetic complications were reported. This review indicated that the medium-term survival rate of LDGC CAD/CAM crowns was high. Further multicenter studies with longer follow-ups and larger sample sizes are needed in order to augment the data already in existence.
Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Prosthesis Design; Esthetics, Dental; Humans
PubMed: 32673449
DOI: 10.17219/dmp/115522 -
Journal of Esthetic and Restorative... Nov 2019To evaluate the survival rate of ceramic and indirect composite inlays, onlays, and overlays manufactured according to different methods (CAD/CAM, pressable, and... (Meta-Analysis)
Meta-Analysis
OBJECTIVES
To evaluate the survival rate of ceramic and indirect composite inlays, onlays, and overlays manufactured according to different methods (CAD/CAM, pressable, and stratified). MEDLINE, EMBASE, and Cochrane Library databases were searched for published articles. Risk of bias, data extraction, subgroup analysis, meta-analysis, and GRADE was performed.
MATERIALS AND METHODS
Prospective, retrospective, or RCT studies, without restriction of language, from 1983 to 2019, with follow-up ≥5 years, reporting survival rates were screened independently by two reviewers in accordance with eligibility criteria.
RESULTS
A total of 13 articles (12 for ceramic, one for indirect composite) met the inclusion criteria. No articles were included regarding crystalline ceramic. The estimated cumulative survival rate for CAD/CAM was 97% after 5 years and 89% after 10 years; for pressable was 95% after 5 years, and for stratified was 88% after 5 years and 93% after 10 years.
CONCLUSIONS
Regardless of the manufacturing method, vitreous ceramic inlays, onlays, and overlays showed high survival, providing evidence that these restorations are a safe treatment.
CLINICAL RELEVANCE
Vitreous ceramic inlays, onlays, and overlays showed high survival, regardless of the manufacturing method, providing evidence that these restorations are a safe treatment.
Topics: Ceramics; Composite Resins; Dental Porcelain; Dental Restoration Failure; Prospective Studies; Retrospective Studies; Survival Rate
PubMed: 31840412
DOI: 10.1111/jerd.12555