-
PloS One 2024Geotextiles are excellent anti-filtration materials commonly used in the field of water conservancy engineering; however, the factors affecting the water permeability...
Geotextiles are excellent anti-filtration materials commonly used in the field of water conservancy engineering; however, the factors affecting the water permeability performance of geotextiles under stressed states during operation have not been fully identified. To investigate the effect of unidirectional stretching on the water permeability of geotextiles, a unidirectional rheological head infiltration test was conducted on the geotextiles using a self-developed test apparatus. In addition, the water permeability of geotextiles with different thicknesses and tensile states was calculated using a set of water permeability calculation methods based on the nonlaminar flow state of geotextiles. The results showed that the water permeability of the W120 geotextile samples initially decreased and then increased under warp stretching and gradually increased under weft stretching. However, the water permeability of the W200 geotextile samples initially decreased and then increased under both warp and weft stretching. Therefore, the thickness of the geotextile affected its permeability properties.
Topics: Permeability; Water; Tensile Strength; Rheology; Materials Testing
PubMed: 38935683
DOI: 10.1371/journal.pone.0306057 -
Indian Journal of Public Health Oct 2023LAMP assay is widely used for detecting pathogens. We observed that the conventional and gradient polymerase chain reaction (PCR) could not detect the extracted...
Electrophoresis of Amplicons is a Better Method to Understand the Performance of Loop-mediated Isothermal Amplification Assay for Screening the Presence of Escherichia coli in Water.
LAMP assay is widely used for detecting pathogens. We observed that the conventional and gradient polymerase chain reaction (PCR) could not detect the extracted Escherichia coli DNA; real-time PCR was able to detect up to a certain limit (10-8 bacterial dilution). At the same time, the LAMP assay could detect the bacteria at a much lower concentration (10-14 dilution). The results of the LAMP assay were evaluated using agarose gel electrophoresis and DNA binding dye (PicoGreen), but only gel electrophoresis gave reliable results. Therefore, we propose using electrophoresis-based amplicon detection to overcome the limitations of dye-based detection. We believe that this amplicon detection will go a long way in the screening of potable drinking water.
Topics: Escherichia coli; Nucleic Acid Amplification Techniques; Water Microbiology; Real-Time Polymerase Chain Reaction; Humans; Electrophoresis, Agar Gel; DNA, Bacterial; Molecular Diagnostic Techniques; Drinking Water
PubMed: 38934812
DOI: 10.4103/ijph.ijph_1628_22 -
Indian Journal of Dental Research :... Jan 2024Wet oral environment may have deleterious effects on performance of the composites due to influences of water sorption and solubility. The study evaluated the hydrolytic...
INTRODUCTION
Wet oral environment may have deleterious effects on performance of the composites due to influences of water sorption and solubility. The study evaluated the hydrolytic degradation caused because of water sorption and solubility of silorane and methacrylate-based dental composites.
METHODS
Ten disc samples (2 mm × 10 mm) were prepared. Samples were analyzed for water solubility and sorption according to ISO 4049:2000 regulations and tested for mass gain or loss following immersion in water or in artificial saliva at 1 day, 15 days, and 30 days period. Student's 't' test, repeated measures analysis of variance (ANOVA), and Tukey's post-hoc tests determined statistical significance of the experimental results with global significance set at P = 0.05.
RESULTS
Considerable sorption and solubility was observed with time in both materials on immersion. Silorane composites showed lower water sorption and solubility than methacrylate-based composite (MBC). Artificial saliva demonstrated higher sorption and solubility compared to distilled water.
CONCLUSION
Silorane composites display enhanced hydrolytic stability even after a month of immersion in contrast to conventional methacrylate-based composites (MBCs), making it a better alternative to MBC resins clinically.
Topics: Solubility; Methacrylates; Composite Resins; Water; Silorane Resins; Saliva, Artificial; Materials Testing; Hydrolysis; Dental Materials
PubMed: 38934754
DOI: 10.4103/ijdr.ijdr_195_23 -
Frontiers in Chemistry 2024Development of low temperature catalytic pyrolysis technology for heated tobacco sheets is expected to increase the aroma of heated tobacco products and improve their...
Development of low temperature catalytic pyrolysis technology for heated tobacco sheets is expected to increase the aroma of heated tobacco products and improve their overall smoking quality. In this study, the low temperature pyrolysis performances of heated tobacco sheets catalyzed by various anionic sodium salts were investigated using TG-DTG, Py-GC-MS technology and smoke routine chemical composition analysis. The results showed that the total weight loss between 100°C and 300°C increased by 7.8%-13.15% after adding various anionic sodium salts, among which, sodium acetate and sodium tartrate showed a relatively higher weight loss. The relative content of free hydroxyacetone, furfuryl alcohol, butyrolactone and megastigmatrienone in the pyrolysis gas increased, while the relative content of free nicotine decreased. With the change of anionic species, the catalytic decomposition ability of cellulose, lignin, and other substances may change, resulting in the distribution alteration of compounds in the pyrolysis gas. After adding sodium acetate and sodium citrate, the release of total particulate matter (TPM), glycerol, and nicotine in flue gas increased. Overall, the addition of sodium acetate and sodium citrate showed a higher low temperature pyrolysis performance of heated tobacco sheets. The research results in this paper provide data support for changing the low temperature catalytic pyrolysis performance of heated tobacco sheets by adjusting the type of anions in sodium salts.
PubMed: 38933929
DOI: 10.3389/fchem.2024.1425244 -
RSC Advances Jun 2024Delivering macromolecules across the skin poses challenges due to the barrier properties of stratum corneum. Different strategies have been reported to cross this...
Delivering macromolecules across the skin poses challenges due to the barrier properties of stratum corneum. Different strategies have been reported to cross this barrier, such as chemical penetration enhancers and physical methods like microneedles, sonophoresis, electroporation, laser ablation, Herein, we explored a cationic lipo-polymeric nanocarrier to deliver a model protein across the skin. A cationic amphiphilic lipo-polymer was used to prepare blank nanoplexes, which were subsequently complexed with anionic fluorescein-tagged bovine serum albumin (FITC-BSA). Blank nanoplexes and FITC-BSA complexed nanoplexes showed sizes of 93.72 ± 5.8 (PDI-0.250) and 145.9 ± 3.2 nm (PDI-0.258), respectively, and zeta potentials of 25.6 ± 7.0 mV and 9.17 ± 1.20 mV. cell culture, and toxicity studies showed optimal use of these nanocarriers, with hemocompatibility data indicating non-toxicity. skin permeation analysis showed a skin permeation rate of 33% after 24 h. The optimized formulation was loaded in a carbopol-based gel that exhibits non-Newtonian flow characteristics with shear-thinning behavior and variable thixotropy. The nanoplexes delivered gel demonstrated skin permeation of 57% after 24 h in mice skin . skin toxicity testing confirmed the low toxicity profile of these nanocarriers. These results are promising for the transdermal/dermal delivery of macromolecules, such as protein therapeutics, using nanoplexes.
PubMed: 38932980
DOI: 10.1039/d4ra02337d -
Polymers Jun 2024Functional polymers play an important role in various biomedical applications. From many choices, poly(2-isopropenyl-2-oxazoline) (PIPOx) represents a promising reactive... (Review)
Review
Functional polymers play an important role in various biomedical applications. From many choices, poly(2-isopropenyl-2-oxazoline) (PIPOx) represents a promising reactive polymer with great potential in various biomedical applications. PIPOx, with pendant reactive 2-oxazoline groups, can be readily prepared in a controllable manner via several controlled/living polymerization methods, such as living anionic polymerization, atom transfer radical polymerization (ATRP), reversible addition-fragmentation transfer (RAFT) or rare earth metal-mediated group transfer polymerization. The reactivity of pendant 2-oxazoline allows selective reactions with thiol and carboxylic group-containing compounds without the presence of any catalyst. Moreover, PIPOx has been demonstrated to be a non-cytotoxic polymer with immunomodulative properties. Post-polymerization functionalization of PIPOx has been used for the preparation of thermosensitive or cationic polymers, drug conjugates, hydrogels, brush-like materials, and polymer coatings available for drug and gene delivery, tissue engineering, blood-like materials, antimicrobial materials, and many others. This mini-review covers new achievements in PIPOx synthesis, reactivity, and use in biomedical applications.
PubMed: 38932057
DOI: 10.3390/polym16121708 -
Polymers Jun 2024As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can...
As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO/APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO/APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages-a rapid stage with a substitution amount of <0.5% and a slow stage with a substitution amount of >0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO/APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO/APAM.
PubMed: 38932028
DOI: 10.3390/polym16121678 -
Pharmaceutics Jun 2024Zastaprazan (JP-1366), a novel potassium-competitive acid blocker, is a new drug for the treatment of erosive esophagitis. JP-1366 is highly metabolized in human, mouse,...
Zastaprazan (JP-1366), a novel potassium-competitive acid blocker, is a new drug for the treatment of erosive esophagitis. JP-1366 is highly metabolized in human, mouse, and dog hepatocytes but moderately metabolized in rat and monkey hepatocytes when estimated from the metabolic stability of this compound in hepatocyte suspension and when 18 phase I metabolites and 5 phase II metabolites [i.e., -dearylation (M6), hydroxylation (M1, M19, M21), dihydroxylation (M7, M8, M14, M22), trihydroxylation (M13, M18), hydroxylation and reduction (M20), dihydroxylation and reduction (M9, M16), hydrolysis (M23), hydroxylation and glucuronidation (M11, M15), hydroxylation and sulfation (M17), dihydroxylation and sulfation (M10, M12), -dearylation and hydroxylation (M3, M4), -dearylation and dihydroxylation (M5), and -dearylation and trihydroxylation (M2)] were identified from JP-1366 incubation with the hepatocytes from humans, mice, rats, dogs, and monkeys. Based on the cytochrome P450 (CYP) screening test and immune-inhibition analysis with CYP antibodies, CYP3A4 and CYP3A5 played major roles in the metabolism of JP-1366 to M1, M3, M4, M6, M8, M9, M13, M14, M16, M18, M19, M21, and M22. CYP1A2, 2C8, 2C9, 2C19, and 2D6 played minor roles in the metabolism of JP-1366. UDP-glucuronosyltransferase (UGT) 2B7 and UGT2B17 were responsible for the glucuronidation of M1 to M15. However, JP-1366 and active metabolite M1 were not substrates for drug transporters such as organic cation transporter (OCT) 1/2, organic anion transporter (OAT) 1/3, organic anion transporting polypeptide (OATP)1B1/1B3, multidrug and toxic compound extrusion (MATE)1/2K, P-glycoprotein (P-gp), and breast cancer-resistant protein (BCRP). Only M1 showed substrate specificity for P-gp. The findings indicated that drug-metabolizing enzymes, particularly CYP3A4/3A5, may have a significant role in determining the pharmacokinetics of zastaprazan while drug transporters may only have a small impact on the absorption, distribution, and excretion of this compound.
PubMed: 38931920
DOI: 10.3390/pharmaceutics16060799 -
Sensors (Basel, Switzerland) Jun 2024The monitoring of body temperature is a recent addition to the plethora of parameters provided by wellness and fitness wearable devices. Current wearable temperature...
The monitoring of body temperature is a recent addition to the plethora of parameters provided by wellness and fitness wearable devices. Current wearable temperature measurements are made at the skin surface, a measurement that is impacted by the ambient environment of the individual. The use of near-infrared spectroscopy provides the potential for a measurement below the epidermal layer of skin, thereby having the potential advantage of being more reflective of physiological conditions. The feasibility of noninvasive temperature measurements is demonstrated by using an in vitro model designed to mimic the near-infrared spectra of skin. A miniaturizable solid-state laser-diode-based near-infrared spectrometer was used to collect diffuse reflectance spectra for a set of seven tissue phantoms composed of different amounts of water, gelatin, and Intralipid. Temperatures were varied between 20-24 °C while collecting these spectra. Two types of partial least squares (PLS) calibration models were developed to evaluate the analytical utility of this approach. In both cases, the collected spectra were used without pre-processing and the number of latent variables was the only optimized parameter. The first approach involved splitting the whole dataset into separate calibration and prediction subsets for which a single optimized PLS model was developed. For this first case, the coefficient of determination (R) is 0.95 and the standard error of prediction (SEP) is 0.22 °C for temperature predictions. The second strategy used a leave-one-phantom-out methodology that resulted in seven PLS models, each predicting the temperatures for all spectra in the held-out phantom. For this set of phantom-specific predicted temperatures, R and SEP values range from 0.67-0.99 and 0.19-0.65 °C, respectively. The stability and reproducibility of the sample-to-spectrometer interface are identified as major sources of spectral variance within and between phantoms. Overall, results from this in vitro study justify the development of future in vivo measurement technologies for applications as wearables for continuous, real-time monitoring of body temperature for both healthy and ill individuals.
Topics: Phantoms, Imaging; Spectroscopy, Near-Infrared; Humans; Least-Squares Analysis; Calibration; Skin; Gelatin; Temperature; Water; Wearable Electronic Devices; Emulsions; Soybean Oil; Phospholipids
PubMed: 38931768
DOI: 10.3390/s24123985 -
Sensors (Basel, Switzerland) Jun 2024We present the design, fabrication, and testing of a low-cost, miniaturized detection system that utilizes chemiluminescence to measure the presence of adenosine...
We present the design, fabrication, and testing of a low-cost, miniaturized detection system that utilizes chemiluminescence to measure the presence of adenosine triphosphate (ATP), the energy unit in biological systems, in water samples. The ATP-luciferin chemiluminescent solution was faced to a silicon photomultiplier (SiPM) for highly sensitive real-time detection. This system can detect ATP concentrations as low as 0.2 nM, with a sensitivity of 79.5 A/M. Additionally, it offers rapid response times and can measure the characteristic time required for reactant diffusion and mixing within the reaction volume, determined to be 0.3 ± 0.1 s. This corresponds to a diffusion velocity of approximately 44 ± 14 mm/s.
Topics: Adenosine Triphosphate; Water; Luminescent Measurements; Luminescence; Biosensing Techniques
PubMed: 38931704
DOI: 10.3390/s24123921