-
Brazilian Oral Research 2024The objective of this study was to analyze the influence of insertion torque, bone type, and peri-implant bone loss on implant stability quotient (ISQ) of cylindrical...
The objective of this study was to analyze the influence of insertion torque, bone type, and peri-implant bone loss on implant stability quotient (ISQ) of cylindrical external hexagon (EH) and Morse Taper (MT) implants. Forty-four single implants were placed in the edentulous areas of 20 patients who met the inclusion and exclusion criteria. Immediately after implant placement (t1) and after osseointegration (four and six months for mandible and maxilla, respectively) (t2), insertion torque, resonance frequency, and peri-implant bone loss were measured using probing depths and digital periapical radiography. A significant difference was noted in the ISQ values between t1 and t2 in type III bone for EH and MT implants. No significant difference in bone loss values was observed when comparing bone types for EH or MT in all evaluated sites. Based on marginal bone loss assessed using radiography, there was no significant difference between the MT and EH groups. A positive correlation between torque and ISQ t1 value was observed for MT (correlation: 0.439; p = 0.041) and EH (correlation: 0.461; p = 0.031) implants. For EH and MT implants, the greater the insertion torque, the greater was the ISQ value (moderately positive correlation). A weak negative correlation was found between bone type and ISQ t1 for MT implants. Contrarily, no correlation was observed between bone type and ISQ t1 for EH implants. In all cases, bone loss around the implants was clinically normal.
Topics: Humans; Torque; Male; Female; Alveolar Bone Loss; Osseointegration; Dental Implantation, Endosseous; Middle Aged; Reference Values; Time Factors; Treatment Outcome; Statistics, Nonparametric; Dental Prosthesis Design; Adult; Mandible; Dental Prosthesis Retention; Aged; Resonance Frequency Analysis; Dental Implants; Maxilla; Dental Implants, Single-Tooth; Reproducibility of Results
PubMed: 38922209
DOI: 10.1590/1807-3107bor-2024.vol38.0049 -
Journal of Functional Biomaterials Jun 2024The advent of three-dimensional (3D) printing technology has revolutionized the field of dentistry, enabling the precise fabrication of dental implants. By utilizing 3D...
BACKGROUND
The advent of three-dimensional (3D) printing technology has revolutionized the field of dentistry, enabling the precise fabrication of dental implants. By utilizing 3D printing, dentists can devise implant plans prior to surgery and accurately translate them into clinical procedures, thereby eliminating the need for multiple surgical procedures, reducing surgical discomfort, and enhancing surgical efficiency. Furthermore, the utilization of digital 3D-printed implant guides facilitates immediate restoration by precisely translating preoperative implant design plans, enabling the preparation of temporary restorations preoperatively.
METHODS
This comprehensive study aimed to assess the postoperative oral health status of patients receiving personalized 3D-printed implants and investigate the advantages and disadvantages between the 3D-printed implant and conventional protocol. Additionally, variance analysis was employed to delve into the correlation between periodontal status and overall oral health. Comparisons of continuous paired parameters were made by -test.
RESULTS
The results of our study indicate a commendable one-year survival rate of over 94% for 3D-printed implants. This finding was corroborated by periodontal examinations and follow-up surveys using the Oral Health Impact Profile-14 (OHIP-14) questionnaire, revealing excellent postoperative oral health status among patients. Notably, OHIP-14 scores were significantly higher in patients with suboptimal periodontal health, suggesting a strong link between periodontal health and overall oral well-being. Moreover, we found that the operating time (14.41 ± 4.64 min) was less statistically significant than for the control group (31.76 ± 6.83 min).
CONCLUSION
In conclusion, personalized 3D-printed implant surgery has emerged as a reliable clinical option, offering a viable alternative to traditional implant methods. However, it is imperative to gather further evidence-based medical support through extended follow-up studies to validate its long-term efficacy and safety.
PubMed: 38921530
DOI: 10.3390/jfb15060156 -
Journal of Functional Biomaterials Jun 2024The design of new, biomimetic biomaterials is of great strategic interest and is converging for many applications, including in implantology. This study explores a novel...
The design of new, biomimetic biomaterials is of great strategic interest and is converging for many applications, including in implantology. This study explores a novel approach to improving dental implants. Although endosseous TA6V alloy dental implants are widely used in oral implantology, this material presents significant challenges, notably the prevalence of peri-implantitis. Therefore, in this study, we investigate a new advance in the design of hybrid medical devices. This involves the design of a Ca-SZ coating deposited by PVD on a TA6V substrate. This approach aims to overcome the inherent limitations of each of these materials, namely TA6V's susceptibility to peri-implantitis on the one hand and zirconia's excessively high Young's modulus compared with bone on the other, while benefiting from their respective advantages, such as the ductility of TA6V and the excellent biocompatibility of zirconia, offering relevant prospects for the design of high-performance implantable medical devices. This study integrates characterisation techniques, focusing on the structural and elemental analysis of the Ca-SZ coating by XRD and TEM. The results suggest that this coating combines a tetragonal structure, a uniform morphology with no apparent defects, a clean interface highlighting good adhesion, and a homogeneous composition of calcium, predisposing it to optimal biocompatibility. All of these findings make this innovative coating a particularly suitable candidate for application in dental implantology.
PubMed: 38921529
DOI: 10.3390/jfb15060155 -
Journal of Functional Biomaterials May 2024The progress of digital technologies in dental prosthodontics is fast and increasingly accurate, allowing practitioners to simplify their daily work. These technologies...
The progress of digital technologies in dental prosthodontics is fast and increasingly accurate, allowing practitioners to simplify their daily work. These technologies aim to substitute conventional techniques progressively, but their real efficiency and predictability are still under debate. Many systematic reviews emphasize the lack of clinical RCTs that compare digital and traditional workflow. To address this evidence, we conducted a three-arm designed clinical RCT, which compares fully digital, combined digital, and analogic and fully analog workflows. We aimed to compare the clinical properties of each workflow regarding interproximal (IC) and occlusal contact (OC), marginal fit, impression time (IT), and patient satisfaction through a VAS scale. In total, 72 patients were included in the study. The IC and OC of the digital workflow were better than the others ( < 0.001), which obtained similar results. No difference between implant-abutment fit was observed ( = 0.5966). The IT was shorter in the digital workflow than the others ( < 0.001), which were similar. Patient satisfaction was higher in the digital workflow than in the conventional one. Despite the limitations, this study's results support better accuracy and patient tolerance of digital workflow than of conventional techniques, suggesting it as a viable alternative to the latter when performed by clinicians experienced in digital dentistry.
PubMed: 38921523
DOI: 10.3390/jfb15060149 -
Journal of Functional Biomaterials May 2024This study investigated a novel strategy for improving regenerative cartilage outcomes. It combines fractional laser treatment with the implantation of neocartilage...
OBJECTIVES
This study investigated a novel strategy for improving regenerative cartilage outcomes. It combines fractional laser treatment with the implantation of neocartilage generated from autologous dynamic Self-Regenerating Cartilage (dSRC).
METHODS
dSRC was generated in vitro from harvested autologous swine chondrocytes. Culture was performed for 2, 4, 8, 10, and 12 weeks to study matrix maturation. Matrix formation and implant integration were also studied in vitro in swine cartilage discs using dSRC or cultured chondrocytes injected into CO laser-ablated or mechanically punched holes. Cartilage discs were cultured for up to 8 weeks, harvested, and evaluated histologically and immunohistochemically.
RESULTS
The dSRC matrix was injectable by week 2, and matrices grew larger and more solid with time, generating a contiguous neocartilage matrix by week 8. Hypercellular density in dSRC at week 2 decreased over time and approached that of native cartilage by week 8. All dSRC groups exhibited high glycosaminoglycan (GAG) production, and immunohistochemical staining confirmed that the matrix was typical of normal hyaline cartilage, being rich in collagen type II. After 8 weeks in cartilage lesions in vitro, dSRC constructs generated a contiguous cartilage matrix, while isolated cultured chondrocytes exhibited only a sparse pericellular matrix. dSRC-treated lesions exhibited high GAG production compared to those treated with isolated chondrocytes.
CONCLUSIONS
Isolated dSRC exhibits hyaline cartilage formation, matures over time, and generates contiguous articular cartilage matrix in fractional laser-created microenvironments in vitro, being well integrated with native cartilage.
PubMed: 38921522
DOI: 10.3390/jfb15060148 -
Journal of Functional Biomaterials May 2024The use of endosseous dental implants may become unfeasible in the presence of significant maxillary bone atrophy; thus, surgical techniques have been proposed to...
Biocompatibility of Subperiosteal Dental Implants: Changes in the Expression of Osteogenesis-Related Genes in Osteoblasts Exposed to Differently Treated Titanium Surfaces.
The use of endosseous dental implants may become unfeasible in the presence of significant maxillary bone atrophy; thus, surgical techniques have been proposed to promote bone regeneration in such cases. However, such techniques are complex and may expose the patient to complications. Subperiosteal implants, being placed between the periosteum and the residual alveolar bone, are largely independent of bone thickness. Such devices had been abandoned due to the complexity of positioning and adaptation to the recipient bone site, but are nowadays witnessing an era of revival following the introduction of new acquisition procedures, new materials, and innovative manufacturing methods. We have analyzed the changes induced in gene and protein expression in C-12720 human osteoblasts by differently surface-modified TiO materials to verify their ability to promote bone formation. The TiO materials tested were (i) raw machined, (ii) electropolished with acid mixture, (iii) sand-blasted + acid-etched, (iv) AlTiColorTM surface, and (v) anodized. All five surfaces efficiently stimulated the expression of markers of osteoblastic differentiation, adhesion, and osteogenesis, such as RUNX2, osteocalcin, osterix, N-cadherin, β-catenin, and osteoprotegerin, while cell viability/proliferation was unaffected. Collectively, our observations document that presently available TiO materials are well suited for the manufacturing of modern subperiosteal implants.
PubMed: 38921520
DOI: 10.3390/jfb15060146 -
Healthcare (Basel, Switzerland) Jun 2024We compared the managing of prevention methods for SARS-CoV-2 infections in dental offices before and immediately after the COVID-19 pandemic. The purpose of this study...
We compared the managing of prevention methods for SARS-CoV-2 infections in dental offices before and immediately after the COVID-19 pandemic. The purpose of this study was to find out the varieties of infection prevention methods used by dentists before and during the pandemic and compare them. We designed a digital transversal questionnaire with 15 closed questions that was sent to 150 dentists in Bucharest, Romania. We received = 112 valid answers during July-August 2021 from dentists of all age groups (25-60 years), with a sex ratio of 0.36, which agreed to anonymously participate in this study. The results showed an increase in types and amount of personal protection equipment (i.e., ocular/facial protection, supplemental gown, and upgrading the FFP1 masks to FFP2 or FFP3). Ocular protection showed statistical significance by gender but not by age group. Vaccination rate against SARS-CoV-2 was at 80% of the participant dentists at the time of the survey and had statistical significance. However, vaccination status of the patients did not alter dentists' protection protocol.
PubMed: 38921284
DOI: 10.3390/healthcare12121169 -
Dentistry Journal Jun 2024Short dental implants have been proposed as an alternative treatment option to bone regeneration procedures for the rehabilitation of resorbed alveolar ridges. The aim... (Review)
Review
Survival Rates of Short Dental Implants (≤6 mm) Used as an Alternative to Longer (>6 mm) Implants for the Rehabilitation of Posterior Partial Edentulism: A Systematic Review of RCTs.
Short dental implants have been proposed as an alternative treatment option to bone regeneration procedures for the rehabilitation of resorbed alveolar ridges. The aim of this paper was to systematically review randomized controlled trials (RCTs) comparing short implants (≤6 mm) and longer implants (>6 mm) in atrophic alveolar ridges in terms of implant survival rates, peri-implant marginal bone loss (MBL), prevalence of peri-implantitis and technical complications. A thorough electronic search was performed until September 2023. RCTs with follow-up of at least 1-year post-loading comparing short implants with rough surfaces to longer implants in the posterior jaws of systemically and periodontally healthy, partially edentulous adults were considered. Studies with incomplete information on the number of patients, follow-up or definition of "short implants" were excluded. The revised Cochrane risk-of-bias tool for randomized trials was used for Risk of bias assessment. Fixed-effects meta-analysis of the selected studies was applied to compare the outcome variables. Random-effect meta-analysis was performed, on the basis of within-study comparisons. In total, 16 articles were selected for meta-analysis and incorporated 408 short implants and 475 longer implants inserted in 317 and 388 patients, respectively. The survival rates of longer implants in pristine or augmented bone were significantly increased compared to short implants (95%CI: 2-5%, < 0.001). Standard-length implants displayed increased, although non-statistically significant MBL (95%CI: -0.17-0.04, > 0.05), and prevalence of peri-implantitis (95%CI: 0-5%, > 0.05). No statistically significant differences were observed between short and long implants in terms of technical complications (implant-level 95%CI: -4-6%, > 0.05). Short implants represent a promising alternative treatment option for the rehabilitation of posterior jaws to avoid additional bone augmentation procedures. Nonetheless, they should be selected cautiously due to a potentially limited survival rate compared to longer implants. A major limitation of this study is the variability in the included studies regarding sample size, patient profile, type of bone, loading protocol, definition of peri-implantitis, among others. This study received no external funding. The study protocol was registered in PROSPERO (CRD42023485514).
PubMed: 38920886
DOI: 10.3390/dj12060185 -
Dentistry Journal Jun 2024The increase in soft tissue (ST) around implants can benefit peri-implant health and aesthetic results. The objective was to compare the gingival and esthetic health... (Review)
Review
BACKGROUND
The increase in soft tissue (ST) around implants can benefit peri-implant health and aesthetic results. The objective was to compare the gingival and esthetic health benefits of immediate implant placement (IIP) with simultaneous or delayed connective tissue graft (CTG) compared to IIP without CTG.
METHODS
A systematic review was carried out by two reviewers in Medline-Pubmed, Scopus, and Cochrane. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) were considered. Randomized Clinical Trials (RCTs) that were published between April 2017 and February 2024 were used. Studies that analyzed the performance of a simultaneous or deferred CTG after the placement of an implant in the aesthetic zone, with or without immediate provisionalization, without previous regeneration, with a follow-up of 6 months, and that were performed in humans were included.
RESULTS
Quantitative analysis was performed using data provided by the RCTs. The five RCTs that were selected analyzed a total "" of 245 subjects who met the inclusion criteria and focused on the subject of the study. In the quantitative analysis, four RCTs were included. The studies evaluated buccal gingiva levels when placing the IIP with and without CTG, obtaining a mean buccal gingiva level difference of 0.09 mm (95% CI: -0.54 to 0.72, = 0.05), statistically not significant, but with a favorable trend.
CONCLUSIONS
The use of CTG associated with the II can maintain the gum level but not increase the volume. CTG is favorable for achieving successful esthetic results when immediate placement of an implant with a provisional prosthesis is planned.
PubMed: 38920885
DOI: 10.3390/dj12060183 -
Dentistry Journal Jun 2024The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in...
The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30β-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant-abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant-abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 β-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing.
PubMed: 38920882
DOI: 10.3390/dj12060181