-
Indian Journal of Dental Research :... Jan 2024High occlusal forces in patients with untreated periodontitis may reflect occlusal trauma-associated periodontal conditions. Occlusal analysis using T-scan might provide...
BACKGROUND
High occlusal forces in patients with untreated periodontitis may reflect occlusal trauma-associated periodontal conditions. Occlusal analysis using T-scan might provide the distribution of occlusal loading forces in periodontitis patients. The study aimed to evaluate the effect of occlusal trauma in periodontitis patients and occlusal calibration using a T-scan.
MATERIALS AND METHODS
A total of 30 periodontitis patients were recruited for the study. Patients were categorized into two groups: Group I: scaling and root planing followed by T-scan recording and no occlusal calibration; Group II: scaling and root planing followed by occlusal calibration using T-scan. Clinical parameters, orthopantomogram (OPG) and T-scan evaluation were evaluated at baseline, 3-month and 6-month intervals.
RESULTS
Significant improvements in clinical parameters were noted at different time intervals after occlusal calibration using T-scan. At 3-month intervals, mean pocket depth showed statistically significant difference among the test group in the right (upper and lower) and left lower quadrant at P = 0.01, 0.002 and 0.005, respectively. Mean clinical attachment level (CAL) showed statistically significant difference among the test group in the right upper, right lower and left lower quadrants at P = 0.02, 0.001 and 0.009, respectively, at 3 months. The comparison of the mean gingival index (GI) at 6 months showed statistically significant difference among test and control groups at 6 months in different study quadrants (P = 1 in right upper, 0.009 in right lower, <0.001 in left upper and <0.001 in left lower). Mean pocket depth at the 6-month follow-up showed statistically significant difference among the test group in all the study quadrants (P = <0.001 in right upper, <0.001 in right lower, 0.003 in left upper and 0.005 in left lower). Mean CAL showed statistically significant difference among the test group in all the study quadrants at 6-month intervals (P = 0.02 in right upper, <0.001 in right lower, 0.01 in left upper and 0.04 in left lower). The bone defect height showed a statistically significant difference only in the right upper quadrant among both the test groups at the 6-month follow-up (P = 0.02). Comparing the mean percentage of force on both sides of the jaw showed a statistically significant difference among the test group at 6 months (P = 0.001 on the left side and 0.001 on the right side).
CONCLUSION
The occlusal correction using T-scan showed a positive association between probing pocket depth (PPD) and CAL at different time intervals from baseline to 6 months when these parameters were compared after occlusal adjustments.
Topics: Humans; Male; Female; Adult; Periodontitis; Middle Aged; Radiography, Panoramic; Bite Force; Root Planing; Dental Scaling; Dental Occlusion, Traumatic; Calibration
PubMed: 38934744
DOI: 10.4103/ijdr.ijdr_40_23 -
Indian Journal of Dental Research :... Jan 2024Internet Addiction and phubbing are prevalent disruptive behaviours among students. The aim of this study was to assess the relationship between phubbing, smartphone...
BACKGROUND
Internet Addiction and phubbing are prevalent disruptive behaviours among students. The aim of this study was to assess the relationship between phubbing, smartphone addiction and some of the related psychological effects among dental undergraduates.
MATERIALS AND METHODS
A multi-centric cross-sectional pre-validated questionnaire-based study was conducted among undergraduate students of five different dental colleges across India. The questionnaire included the Phubbing Scale, Barratt Impulsiveness Scale (BIS), Smartphone Application-based Addiction Scale (SABAS), and Rosenberg Self-Esteem Scale (RSES). The data were analysed with IBM SPSS version 21, followed by a t-test, analysis of variance (ANOVA), and Spearmen's co-relation to find the association between different psychological variables among study subjects.
RESULTS
The total sample comprise of 1226 with mean age of 22.35. The SABAS showed a higher mean ± standard deviation (SD) score (3.17 ± 0.93). The Phubbing Scale showed a positive correlation with the SABAS (0.658), the results were found to be highly statistically significant (P = 0.01).
CONCLUSION
The present study found a higher prevalence of phubbing and smartphone addiction among dental students. Our results showed that impulsiveness leads to internet addiction and thus phubbing is becoming a way to find solace during communication to escape anxiety and distress.
Topics: Humans; Students, Dental; Smartphone; Female; Cross-Sectional Studies; Male; Young Adult; Behavior, Addictive; India; Surveys and Questionnaires; Internet Addiction Disorder; Adult; Self Concept; Prevalence; Adolescent
PubMed: 38934742
DOI: 10.4103/ijdr.ijdr_565_23 -
Indian Journal of Dental Research :... Jan 2024Expanding knowledge on tobacco use and quitting outcomes in Chhattisgarh, India, is crucial. Limited data hinder the assessment of tobacco use prevalence and quitting...
INTRODUCTION
Expanding knowledge on tobacco use and quitting outcomes in Chhattisgarh, India, is crucial. Limited data hinder the assessment of tobacco use prevalence and quitting outcomes in the region. This household-based cross-sectional study aimed to assess smokeless tobacco (SLT) use and quit behaviour among village dwellers aged 35-44 and 65-74 years in Jamul, Chhattisgarh.
MATERIALS AND METHODS
A survey was conducted among 450 participants, utilising a pretested questionnaire and data analysis using IBM Statistical Package for the Social Sciences (SPSS) v23.
RESULTS
The study revealed that among the survey participants, 61.1% were males and 38.9% were females. The prevalence of SLT use was found to be 67.8%, with 59.1% of current SLT users reporting daily use. Middle-aged individuals predominantly chose gutkha, while khaini was more common among the elderly. Tobacco and paan with tobacco were also commonly used forms. Gudakhu, a popular SLT product for oral hygiene and easy defecation, was reported by 71.34% of participants. Television warnings and SLT packages proved to be successful methods for disseminating information about the dangers of SLT use. However, SLT users who attempted to quit independently reported encountering one or more withdrawal symptoms, which posed significant obstacles to quitting SLT.
CONCLUSION
Community-based awareness programmes are implemented via regional television (TV) channels, coupled with cessation initiatives, including professional counselling, pharmaceutical interventions and support of peer. Changing attitudes against SLT use and promoting tobacco-free environments are prioritized. These strategies will effectively address SLT use and improve quitting outcomes in Jamul, Chhattisgarh, fostering a healthier community.
Topics: Humans; Tobacco, Smokeless; Female; Male; India; Adult; Cross-Sectional Studies; Middle Aged; Aged; Rural Population; Tobacco Use Cessation; Tobacco Use; Surveys and Questionnaires; Prevalence
PubMed: 38934741
DOI: 10.4103/ijdr.ijdr_596_23 -
Indian Journal of Dental Research :... Jan 2024To comparatively evaluate the effect of normal saline gel and ozonated saline-ozonated gel (ozone therapy) on pain, inflammation, soft tissue, and crestal bone loss in... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
AIMS
To comparatively evaluate the effect of normal saline gel and ozonated saline-ozonated gel (ozone therapy) on pain, inflammation, soft tissue, and crestal bone loss in dental implant surgery.
METHODS AND MATERIAL
Forty adult patients scheduled to undergo implant were randomized into two groups: Twenty patients (n = 20) received ozone therapy and controls (n = 20) received normal saline and gel during implant placement. Inflammation and pain were noted at days 1 and 7 and 3 month intervals by estimating C-reactive protein (CRP) levels and assessing visual analogue scale (VAS) scores. At 3 months, soft tissue outcomes were noted in terms of plaque index, gingival index, and pocket depth, while crestal bone loss was noted via a radiograph.
RESULTS
Mean CRP levels were significantly higher in the control group as compared to that in the case group on day 1 and day 7 follow-ups (P < 0.05). Mean VAS scores for pain were also lower in the case group as compared to the control group at all follow-ups, but the difference was significant statistically only at day 1 (P = 0.061). The plaque index was significantly lower in the case group as compared to the control group (P = 0.011) at final follow-up. No significant difference between two groups was observed for crestal bone loss.
CONCLUSIONS
Ozone therapy during implant placement was effective in reduction of pain, systemic inflammation, and plaque deposition in dental implant patients.
Topics: Humans; Ozone; Gels; Male; Female; Adult; Middle Aged; C-Reactive Protein; Saline Solution; Dental Implants; Dental Plaque Index; Alveolar Bone Loss; Periodontal Index; Pain Measurement; Dental Implantation; Inflammation
PubMed: 38934740
DOI: 10.4103/ijdr.ijdr_591_23 -
Indian Journal of Dental Research :... Jan 2024
Topics: Humans; Dental Implants; Robotics; Robotic Surgical Procedures; Dental Implantation, Endosseous
PubMed: 38934739
DOI: 10.4103/ijdr.ijdr_358_24 -
Acta Odontologica Scandinavica Jun 2024The Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) is part of the undergraduate dental curriculum. Online teaching has nowadays become common also in...
INTRODUCTION
The Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) is part of the undergraduate dental curriculum. Online teaching has nowadays become common also in dentistry.
OBJECTIVE
To compare undergraduate students' self-assessed ability and satisfaction with learning DC/TMD Axis I between traditional and online learning and to evaluate the possible gains of online teaching.
MATERIAL AND METHODS
Third-year undergraduate dental students in 2018 (traditional learning, Group 1, n = 43/50) and in 2019 (online learning, Group 2, n = 34/50) at the University of Oulu, Finland evaluated their self-assessed ability and satisfaction with learning DC/TMD clinical examination and diagnostics on a 10-point scale. Additionally, those participating in online courses answered to two open-ended questions; Group 2 (n = 50) and another group from the University of Eastern Finland in 2019 and 2020 (n = 75, Group 3). Total of 105/125 students (84%) responded. Content analysis was used to open-ended responses.
RESULTS
The online course reported significantly higher self-assessed ability in measurements (p = 0.004), identifying referred pain (p = 0.043) and statement for the diagnostics (p = 0.017) and also higher self-assessed satisfaction in measurements (p = 0.046). According to the content analysis, essential gains of online teaching were efficient learning, videos and exercises, and adjustability to own timetable.
CONCLUSION
The online learning course can be considered as a good option for traditional learning of the DC/TMD protocol.
Topics: Humans; Temporomandibular Joint Disorders; Education, Dental; Education, Distance; Finland; Male; Female; Curriculum; Surveys and Questionnaires
PubMed: 38934339
DOI: 10.2340/aos.v83.40984 -
Radiology Case Reports Aug 2024For maxillary gingival carcinomas, especially those in the molar region, surgical resection is often performed beyond the maxillary tuberosity. Bleeding from the...
For maxillary gingival carcinomas, especially those in the molar region, surgical resection is often performed beyond the maxillary tuberosity. Bleeding from the posterior superior alveolar or maxillary artery into the pterygoid process is difficult to stop during partial maxillary resection. Advances in catheterization and materials have enabled the embolization of various vessels. In this report, we describe two cases of maxillary gingival cancer in which preoperative endovascular arterial embolization prevented bleeding due to unexpected vascular injury, allowing for a safe surgery with minimal blood loss. This technique effectively avoids emergency hemostasis for unexpected bleeding when resecting gingival cancers in the maxillary molar region.
PubMed: 38933655
DOI: 10.1016/j.radcr.2024.05.052 -
Frontiers in Oral Health 2024Silver(I)-diammine fluoride (SDF) and silver(I)-fluoride (SF) complexes have been successfully employed for the arrest of dental caries for many years. However, to date...
Explorations of the chemical constitution and aqueous solution status of caries-arresting silver(I)-diammine fluoride and silver(I)-fluoride products using high-resolution F NMR analysis. Spectroscopic and SEM investigations of their interactions with human saliva: evidence for the...
INTRODUCTION
Silver(I)-diammine fluoride (SDF) and silver(I)-fluoride (SF) complexes have been successfully employed for the arrest of dental caries for many years. However, to date there are very few studies available reporting on the molecular structural compositional and solution status of these agents [typically applied as highly-concentrated 38% (w/v) solutions]. Here, we explored the solution status and chemical constitution of commercially-available SDF and SF products, and secondly investigated the multicomponent interplay of these products with biomolecules present in intact human whole-mouth salivary supernatants (WMSSs) .
METHODS
High-resolution F NMR analysis was employed to explore SDF and SF product solutions, and to determine WMSS fluoride (F) concentrations, whereas ammonia (NH) release form SDF was tracked by H NMR spectroscopy. SEM and thin-film FTIR-ATR analyses were employed to explore the atomic and molecular compositions of sequentially-generated AgCl deposits and chromophoric Ag/AgCl nanoparticles (CSNPs); the time-dependent generation of the latter was followed spectrophotometrically.
RESULTS
F NMR spectra of aqueous SF solutions contained a very broad F signal (Δv 70 Hz), demonstrating that much of its solvated F content was rapidly exchanging with Ag(I) on the NMR timescale, but those of SDF had a much sharper resonance, similar to that of "free" F (4 Hz). Moreover, further NMR results revealed that a popular SDF product contained high molar excesses of both F and NH. Treatment of WMSSs with SDF and SF generated an off-white precipitate, which slowly developed into CSNPs at 23°C; SEM demonstrated high contents of both silver and chloride in this material (ca.1:1 atomic content ratio). FTIR-ATR analysis found that the CSNPs formed contained a range of salivary biomolecules, which appear to encapsulate the Ag/AgCl core (significant thiocyanate contents were also found). In conclusion, NMR results acquired demonstrated that SF, but not SDF, product solutions feature rapidly-exchanging F between its "free" and Ag(I)-bound forms, and that SDF contains large excesses of both F and its NH ligands. Characterised AgCl deposits and CSNPs were sequentially produced from the interactions of these complexes with WMSS biomolecules.
DISCUSSION
In view of their well-known microbicidal and cariostatic properties, the observed autobioconstruction of CSNPs involving salivary catalysis is of much therapeutic significance.
PubMed: 38933119
DOI: 10.3389/froh.2024.1373885 -
Polymers Jun 2024The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication.... (Review)
Review
The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes.
PubMed: 38932068
DOI: 10.3390/polym16121717 -
Polymers Jun 2024The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in...
The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in comparison to each other and to subtractively manufactured devices. A total of 192 occlusal devices were manufactured by one SLA-printing and two DLP-printing methods in 5 different build angles as well as milling. The specimens were scanned and superimposed to their initial CAD data and each other to obtain trueness and precision data values. A second series of scans were performed after the specimens underwent an artificial aging simulation by thermocycling. Again, trueness and precision were investigated, and pre- and post-aging values were compared. A statistically significant influence was found for all main effects: manufacturing method, build angle, and thermocycling, confirmed by two-way ANOVA. Regarding trueness, overall tendency indicated that subtractively manufactured splints were more accurate than the 3D-printed, with mean deviation values around ±0.15 mm, followed by the DLP1 group, with ±0.25 mm at 0 degree build angle. Within the additive manufacturing methods, DLP splints had significantly higher trueness for all build angles compared to SLA, which had the highest mean deviation values, with ±0.32 mm being the truest to the original CAD file. Regarding precision, subtractive manufacturing showed better accuracy than additive manufacturing. The artificial aging demonstrated a significant influence on the dimensional accuracy of only SLA-printed splints.
PubMed: 38932064
DOI: 10.3390/polym16121714