-
Nutrients Jun 2024Androgen production primarily occurs in Leydig cells located in the interstitial compartment of the testis. In aging males, testosterone is crucial for maintaining... (Review)
Review
Androgen production primarily occurs in Leydig cells located in the interstitial compartment of the testis. In aging males, testosterone is crucial for maintaining muscle mass and strength, bone density, sexual function, metabolic health, energy levels, cognitive function, as well as overall well-being. As men age, testosterone production by Leydig cells of the testes begins to decline at a rate of approximately 1% per year starting from their 30s. This review highlights recent findings concerning the use of natural polyphenolics compounds, such as flavonoids, resveratrol, and phenolic acids, to enhance testosterone production, thereby preventing age-related degenerative conditions associated with testosterone insufficiency. Interestingly, most of the natural polyphenolic antioxidants having beneficial effects on testosterone production tend to enhance the expression of the steroidogenic acute regulatory protein () gene in Leydig cells. The STAR protein facilitates the entry of the steroid precursor cholesterol inside mitochondria, a rate-limiting step for androgen biosynthesis. Natural polyphenolic compounds can also improve the activities of steroidogenic enzymes, hypothalamus-pituitary gland axis signaling, and testosterone bioavailability. Thus, many polyphenolic compounds such as luteolin, quercetin, resveratrol, ferulic acid phenethyl ester or gigantol may be promising in delaying the initiation of late-onset hypogonadism accompanying aging in males.
Topics: Male; Humans; Hypogonadism; Antioxidants; Polyphenols; Testosterone; Leydig Cells; Animals; Aging; Phosphoproteins; Resveratrol
PubMed: 38931170
DOI: 10.3390/nu16121815 -
Plants (Basel, Switzerland) Jun 2024An investigation of phenolic glycosides extracted from germplasm revealed that arbusculoidin (benzyl 1--β-d-glucopyranosyl-1-hydroxy-6-oxo-2-cyclohexenyl carboxylate)...
An investigation of phenolic glycosides extracted from germplasm revealed that arbusculoidin (benzyl 1--β-d-glucopyranosyl-1-hydroxy-6-oxo-2-cyclohexenyl carboxylate) and its enolic 6-glycoside isomer, isoarbusculoidin, are widespread across the Salix family. An analysis of natural hybrid species and progeny from a willow breeding programme demonstrated that the putative biosynthetic pathway leading to the salicinoid family of phenolic glycosides runs in parallel to a "benzyl"-based pathway to arbusculoidin. The introduction of a known Diels-Alder reaction trait from , as well as an acylation trait, into progeny containing both salicyl- and benzyl- pathways caused the formation of all possible hetero-cyclodimers from mixtures of reactive dienone (acyl)glycosides that participated in cross-over reactions. In addition to providing access to new analogues of the anti-cancer dimer miyabeacin, the analysis of the breeding progeny also indicated that these dienone (acyl)glycosides are stable in planta. Although the immediate biosynthetic precursors of these compounds remain to be defined, the results suggest that the (acyl)glycosylation reactions may occur later in the pathway than previously suggested by in vitro work on cloned UGT enzymes.
PubMed: 38931042
DOI: 10.3390/plants13121609 -
Molecules (Basel, Switzerland) Jun 2024In this study, the optimal microwave-assisted sol-gel synthesis parameters for achieving TiO nanoparticles with the highest specific surface area and photocatalytic...
In this study, the optimal microwave-assisted sol-gel synthesis parameters for achieving TiO nanoparticles with the highest specific surface area and photocatalytic activity were determined. Titanium isopropoxide was used as a precursor to prepare the sol (colloidal solution) of TiO. Isopropanol was used as a solvent; acetylacetone was used as a complexation moderator; and nitric acid was used as a catalyst. Four samples of titanium dioxide were synthesized from the prepared colloidal solution in a microwave reactor at a temperature of 150 °C for 30 min and at a temperature of 200 °C for 10, 20, and 30 min. The phase composition of the TiO samples was determined by X-ray diffraction analysis (XRD) and Fourier-transform infrared spectroscopy (FTIR). Nitrogen adsorption/desorption isotherms were used to determine the specific surface area and pore size distributions using the Brunauer-Emmett-Teller (BET) method. The band-gap energy values of the TiO samples were determined by diffuse reflectance spectroscopy (DRS). The distribution of Ti and O in the TiO samples was determined by SEM-EDS analysis. The effects of adsorption and photocatalytic activity of the prepared TiO samples were evaluated by the degradation of ciprofloxacin (CIP) as an emerging organic pollutant (EOP) under UV-A light (365 nm). The results of the photocatalytic activity of the synthesized TiO nanoparticles were compared to the benchmark Degussa P25 TiO. Kinetic parameters of adsorption and photocatalysis were determined and analyzed. It was found that crystalline TiO nanoparticles with the highest specific surface area, the lowest energy band gap, and the highest photocatalytic degradation were the samples synthesized at 200 °C for 10 min. The results indicate that CIP degradation by all TiO samples prepared at 200 °C show a synergistic effect of adsorption and photocatalytic degradation in the removal process.
PubMed: 38930999
DOI: 10.3390/molecules29122935 -
Molecules (Basel, Switzerland) Jun 2024In-depth insights into the oligomers of carbon dots (CDs) prepared from small-molecule precursors are important in the study of the carbonization mechanism of CDs and...
In-depth insights into the oligomers of carbon dots (CDs) prepared from small-molecule precursors are important in the study of the carbonization mechanism of CDs and for our knowledge of their complex structure. Herein, citric acid (CA) and ethylenediamine (EDA) were used as small-molecule precursors to prepare CDs in an aqueous solution. The structure of oligomers acquired from CA and EDA in different molar ratios and their formation process were first studied using density functional theory, including the dispersion correction (DFT-D3) method. The results showed that the energy barrier of dimer cyclization was higher than that of its linear polymerization, but the free energy of the cyclized product was much lower than that of its reactant, and IPCA (5-oxo-1,-2,3,5-tetrahydroimidazo [1,2-a]pyridine-7-carboxylic acid) could therefore be obtained under certain conditions. The oligomers obtained from different molar ratios of EDA and CA were molecular clusters formed by short polyamide chains through intermolecular forces; with the exception of when the molar ratio of EDA to CA was 0.5, excessive CA did not undergo an amidation reaction but rather attained molecular clusters directly through intermolecular forces. These oligomers exhibited significant differences in their surface functional groups, which would affect the carbonization process and the surface structure of CDs.
PubMed: 38930988
DOI: 10.3390/molecules29122920 -
The Grafting of Hydroxyaromatic Organics within Layered Perovskites via a Microwave-Assisted Method.Molecules (Basel, Switzerland) Jun 2024A new series of inorganic-organic hybrid perovskite materials were prepared by microwave-assisted grafting reactions. Simple carboxylic acids, acetic acid, and propionic...
A new series of inorganic-organic hybrid perovskite materials were prepared by microwave-assisted grafting reactions. Simple carboxylic acids, acetic acid, and propionic acid, as well as hydroxyaromatic carboxylic acids, 3,5-dihydroxy benzoic acid (DBA), 5-hydroxyisophthalic acid (HPA), 4-hydroxybenzoic acid (HBA), and 4-hydroxy-4-biphenyl carboxylic acid (HBCA), were reacted with the Dion-Jacobson double-layered perovskite, HLaNbO and its alcoxy derivatives. Grafting was found to not occur with simple carboxylic acids, while those molecules with hydroxyls were all attached to the perovskite interlayers. Reactivity of the hydroxyaromatic carboxylic acids varied with the different layered perovskite hosts where reactions with HLaNbO did not occur, and those with n-propoxy-LaNbO were limited; the greatest extent of reactivity was seen with n-decoxy-LaNbO. This is attributed to the larger interlayer spacing available for the insertion of the various hydroxyaromatic carboxylic acid compounds. The loading exhibited by the grafting species was less than that seen with well-known long-chain alkoxy grafting groups. It is expected that the width of the molecules contributes to this where, due to the benzyl groups, the interlayer volume of the grafted moieties occupies a larger horizontal fraction, therefore minimizing the loading to the below half. X-ray powder diffraction and transmission electron microscopy studies found that grafting of the n-decoxy-LaNbO intermediates with the series of hydroxyaromatics resulted in a reduction in crystallinity along with a disruption of the layer structure. Raman data on the series show little variation in local structure except for HBCA, where there appears to be a lengthening of the Nb-O apical linkage and a possible reduction in the distortion of inner-layer NbO octahedra. The optical properties of the hydroxyaromatic carboxylic acid grafted perovskites were also investigated using diffuse-reflectance UV-Vis spectroscopy. The band gaps of DBA, HPA, and HBA were found to be similar to the parent (E ≈ 3.4 eV), while the HBCA was significantly less by ca. 0.6 eV. This difference is attributed to electron withdrawal from the perovskite block to the HBCA ligand, leading to a lower band gap for the HBCA compound. The methods described herein allow for the formation of a new series of inorganic-organic hybrid materials where the products are of interest as precursors to more complex architectures as well as models for band gap modification of metal oxide photocatalysts.
PubMed: 38930953
DOI: 10.3390/molecules29122888 -
Molecules (Basel, Switzerland) Jun 2024The selective hydrogenation of the biomass platform molecule furfural (FAL) to produce furfuryl alcohol (FA) is of great significance to alleviate the energy crisis....
The selective hydrogenation of the biomass platform molecule furfural (FAL) to produce furfuryl alcohol (FA) is of great significance to alleviate the energy crisis. Cu-based catalysts are the most commonly used catalysts, and their catalytic performance can be optimized by changing the preparation method. This paper emphasized the effect of calcination atmosphere on the performance of a Cu/AlO catalyst for the selective hydrogenation of FAL. The precursor of the Cu/AlO catalyst prepared by the ammonia evaporation method was treated with different calcination atmospheres (N and air). On the basis of the combined results from the characterizations using in situ XRD, TEM, NO titration, H-TPR and XPS, the Cu/AlO catalyst calcined in the N atmosphere was more favorable for the dispersion and reduction of Cu species and the reduction process could produce more Cu and Cu species, which facilitated the selective hydrogenation of FAL to FA. The experimental results showed that the N calcination atmosphere improved the FAL conversion and FA selectivity, and the FAL conversion was further increased after reduction. Cu/AlO-N-R exhibited the outstanding performance, with a high yield of 99.9% of FA after 2 h at 120 °C and an H pressure of 1 MPa. This work provides a simple, efficient and economic method to improve the C=O hydrogenation performance of Cu-based catalysts.
PubMed: 38930819
DOI: 10.3390/molecules29122753 -
Micromachines Jun 2024This study investigated the influence of microstructure on the performance of Ag inkjet-printed, resistive temperature detectors (RTDs) fabricated using particle-free...
This study investigated the influence of microstructure on the performance of Ag inkjet-printed, resistive temperature detectors (RTDs) fabricated using particle-free inks based on a silver nitrate (AgNO) precursor and ethylene glycol as the ink solvent. Specifically, the temperature coefficient of resistance (TCR) and sensitivity for sensors printed using inks that use monoethylene glycol (mono-EG), diethylene glycol (di-EG), and triethylene glycol (tri-EG) and subjected to a low-pressure argon (Ar) plasma after printing were investigated. Scanning electron microscopy (SEM) confirmed previous findings that microstructure is strongly influenced by the ink solvent, with mono-EG inks producing dense structures, while di- and tri-EG inks produce porous structures, with tri-EG inks yielding the most porous structures. RTD testing revealed that sensors printed using mono-EG ink exhibited the highest TCR (1.7 × 10/°C), followed by di-EG ink (8.2 × 10/°C) and tri-EG ink (7.2 × 10/°C). These findings indicate that porosity exhibits a strong negative influence on TCR. Sensitivity was not strongly influenced by microstructure but rather by the resistance of RTD. The highest sensitivity (0.84 Ω/°C) was observed for an RTD printed using mono-EG ink but not under plasma exposure conditions that yield the highest TCR.
PubMed: 38930719
DOI: 10.3390/mi15060749 -
Microorganisms May 2024Stevioside is a secondary metabolite of diterpenoid glycoside production in plants. It has been used as a natural sweetener in various foods because of its high...
Stevioside is a secondary metabolite of diterpenoid glycoside production in plants. It has been used as a natural sweetener in various foods because of its high sweetness and low-calorie content. In this study, we constructed a strain for the complete synthesis of stevioside using a metabolic engineering strategy. Firstly, the synthesis pathway of steviol was modularly constructed in BY4742, and the precursor pathway was strengthened. The yield of steviol was used as an indicator to investigate the expression effect of different sources of diterpene synthases under different combinations, and the strains with further improved steviol yield were screened. Secondly, glycosyltransferases were heterologously expressed in this strain to produce stevioside, the sequence of glycosyltransferase expression was optimized, and the uridine diphosphate-glucose (UDP-Glc) supply was enhanced. Finally, the results showed that the strain SST-302III-ST2 produced 164.89 mg/L of stevioside in a shake flask experiment, and the yield of stevioside reached 1104.49 mg/L in an experiment employing a 10 L bioreactor with batch feeding, which was the highest yield reported. We constructed strains with a high production of stevioside, thus laying the foundation for the production of other classes of steviol glycosides and holding good prospects for application and promotion.
PubMed: 38930507
DOI: 10.3390/microorganisms12061125 -
Materials (Basel, Switzerland) Jun 2024This paper investigates the high temperature resistance performance and mechanism of potassium-activated blended precursor geopolymer with silica fume. The failure...
This paper investigates the high temperature resistance performance and mechanism of potassium-activated blended precursor geopolymer with silica fume. The failure morphology, volume, and mass loss, compressive strength deterioration, hydration production, and pore structure are measured and analyzed. The results show that introducing slag into fly ash-based geopolymer could greatly improve the 28 d compressive strength but reduce the thermal stability. In contrast, the partial substitution of fly ash by metakaolin contributes to excellent high temperature resistance with slightly enhanced 28 d compressive strength. After being exposed at 800 °C, the residual compressive strength of F7M3 remains at 37 MPa, almost 114% of the initial ambient-temperature strength. An appropriately enlarged silica fume content in geopolymer results in increased compressive strength and enhanced thermal stability. However, an excessive silica fume content is detrimental to the generation of alkali-aluminosilicate gels and ceramic-like phases and thus exacerbates the high temperature damage.
PubMed: 38930345
DOI: 10.3390/ma17122975 -
Materials (Basel, Switzerland) Jun 2024Antibiotic resistance is a global health crisis caused by the overuse and misuse of antibiotics. Accordingly, bacteria have developed mechanisms to resist antibiotics....
Antibiotic resistance is a global health crisis caused by the overuse and misuse of antibiotics. Accordingly, bacteria have developed mechanisms to resist antibiotics. This crisis endangers public health systems and medical procedures, underscoring the urgent need for novel antimicrobial agents. This study focuses on the green synthesis of ZnO nanoparticles (NPs) using aqueous extracts from subps. leaves and stems, employing different zinc sulfate concentrations (0.5, 1, and 2 M). NP characterization included transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD), along with Fourier transform infrared spectroscopy (FTIR) analysis. This study aimed to assess the efficacy of ZnO NPs, prepared at varying concentrations of zinc sulfate, for their capacity to inhibit both Gram-positive and Gram-negative bacteria, as well as their antioxidant potential using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method. SEM and TEM results showed predominantly spherical NPs. The smallest size (18.5 ± 1.3 nm for leaves and 18.1 ± 1.3 nm for stems) occurred with the 0.5 M precursor concentration. These NPs also exhibited remarkable antibacterial activity against both Gram-positive and Gram-negative bacteria at 10 µg/mL, as well as the highest antioxidant activity, with an IC (the concentration of NPs that scavenge 50% of the initial DPPH radicals) of 62 ± 0.8 (µg/mL) for the leaves and 35 ± 0.6 (µg/mL) for the stems. NPs and precursor concentrations were modeled to assess their impact on bacteria using a 2D polynomial equation. Response surface plots identified optimal concentration conditions for antibacterial effectiveness against each species, promising in combating antibiotic resistance.
PubMed: 38930221
DOI: 10.3390/ma17122853