-
International Journal of Biological... Jun 2024The current research emphasis on identifying unconventional starch sources with varied properties to broaden industrial applications. The focus of this research is on...
The current research emphasis on identifying unconventional starch sources with varied properties to broaden industrial applications. The focus of this research is on the search for alternative sources of starch with different properties in order to expand their potential use in the industrial sector. Starch was extracted from Trapa natans and Nelumbo nucifera and analyzed for their physicochemical and functional properties. They had similar protein (0.35 %) and ash contents, but the nitrogen-free extract was slightly higher in Nelumbo starch (87.58 %) than in Trapa starch (85.09 %). The amylose and amylopectin contents were 23.89 % and 76.11 % in Trapa starch and 15.70 % and 84.30 % in Nelumbo starch, respectively. Fourier-transform infrared spectroscopy identified both as polysaccharides. The characteristic absorption bands assigned to the stretching of OH groups (3324 cm; 3280 cm), the asymmetric and symmetric stretching of aliphatic chain groups (2925 cm; 2854 cm), the bending vibration of CHO groups (1149 cm; 1144 cm) were present in both the starch samples, with the exception of CH which could not be detected in Trapa natans starch. X-ray diffraction confirmed hexagonal and orthorhombic crystal structures in Nelumbo nucifera and Trapa natans starch. Scanning electron microscopy revealed a smooth oval and a rough cuboidal shape for lotus and chestnut starch, respectively. Rheological analysis showed that both starch solutions exhibited gel behavior, with Trapa showing stronger gel behavior after the crossover point. These results suggest potential applications in various industries, including the food industry and beyond.
PubMed: 38914388
DOI: 10.1016/j.ijbiomac.2024.133077 -
International Journal of Biological... Jun 2024Normal and waxy maize starches were treated with mild alkali treatment (pH 8.5, 9.9, 11.3) in two temperature-time combinations (25 °C for 1 h and 50 °C for 18 h)...
Normal and waxy maize starches were treated with mild alkali treatment (pH 8.5, 9.9, 11.3) in two temperature-time combinations (25 °C for 1 h and 50 °C for 18 h) to investigate the effect on starch structure and properties. Mild alkali treatment partly removed the starch granule-associated proteins and lipids of normal (from 0.31 % to 0.24 % and from 0.77 % to 0.55 %, respectively) and waxy maize starches (from 0.22 % to 0.18 % and from 0.24 % to 0.15 %, respectively). Gelatinization enthalpy of waxy maize starch increased with alkali treatment from 16.20 J·g to 21.95 J·g, indicating that amylopectin (AP) rearrangement and AP-AP double helices formation might occur. But amylose could inhibit these effects by restricting mobility of amylopectin, and no such changes occurred for normal maize starch. Alkali treatment decreased gelatinization temperature and increased peak and final viscosity. Alkali treatment decreased trough viscosity and increased setback of normal maize starch. The hydrothermal treatment promoted the effect of alkali, attributed to the more rapid molecular motion at higher temperature. Normal and waxy starches showed different changes after alkali treatment, indicating that amylose played an important role in controlling the effect of alkali and hydrothermal treatment, primarily as an obstructer of amylopectin rearrangement in mild alkali treatment.
PubMed: 38897493
DOI: 10.1016/j.ijbiomac.2024.133238 -
Foods (Basel, Switzerland) May 2024Glutinous rice (GR), an important food crop in Asia, provides prolonged energy for the human body due to its high amylopectin content. The non-volatile metabolites...
Glutinous rice (GR), an important food crop in Asia, provides prolonged energy for the human body due to its high amylopectin content. The non-volatile metabolites generated by different cooking methods that affect the nutritional value and color of GR are still poorly understood. Herein, a widely targeted metabolomics approach was used to understand the effects of different cooking methods (steaming, baking, and frying) on the metabolite profiles of GR. Compared with other treatments, steamed GR had a brighter color and significantly lower contents of total sugar, starch, amylopectin, and amylose, at 40.74%, 14.13%, 9.78%, and 15.18%, respectively. Additionally, 70, 108, and 115 metabolites were significantly altered in the steaming, baking, and frying groups respectively, and amino acid and carbohydrate metabolism were identified as the representative metabolic pathways based on KEGG annotations. Further evaluation of 14 amino acids and 12 carbohydrates in steamed GR, especially 4-aminobutyric acid, suggested its high nutraceutical value. Additionally, multivariate analysis indicated that total sugar content, amylose content, beta-alanine methyl ester hydrochloride, and 4-aminobutyric acid played a critical role in color formation in raw and cooked GR. Finally, the levels of major amino acids and carbohydrates were quantified by conventional methods to verify the reliability of the metabolome. Consequently, this in-depth understanding of metabolite profiling in normal cooking methods has provided a foundation for the processing of GR products.
PubMed: 38890846
DOI: 10.3390/foods13111617 -
Food Research International (Ottawa,... Aug 2024The digestibility of ungelatinized, short-term retrograded and long-term retrograded starch from foxtail millet was investigated and correlated with starch chain length...
The digestibility of ungelatinized, short-term retrograded and long-term retrograded starch from foxtail millet was investigated and correlated with starch chain length distributions (CLDs). Some variations in starch CLDs of different varieties were obtained. Huangjingu and Zhonggu 9 had higher average chain lengths of debranched starch and lower average chain length ratios of amylopectin and amylose than Dajinmiao and Jigu 168. Compared to ungelatinized starch, retrogradation significantly increased the estimated glycemic index (eGI), whereas significantly decreased the resistant starch (RS). In contrast, long-term retrograded starches have lower eGI (93.33-97.37) and higher RS (8.04-14.55%) than short-term retrograded starch. PCA and correlation analysis showed that amylopectin with higher amounts of long chains and longer long chains contributed to reduced digestibility in ungelatinized starch. Both amylose and amylopectin CLDs were important for the digestibility of retrograded starch. This study helps a better understanding of the interaction of starch CLDs and digestibility during retrogradation.
Topics: Setaria Plant; Digestion; Starch; Amylopectin; Amylose; Glycemic Index
PubMed: 38876595
DOI: 10.1016/j.foodres.2024.114563 -
Food Chemistry Jun 2024Multi-scale structures were investigated to understand starch digestibility of instant rice. A wide range of maximum starch digested ratio, up to about 20%, was observed...
Multi-scale structures were investigated to understand starch digestibility of instant rice. A wide range of maximum starch digested ratio, up to about 20%, was observed among instant rice prepared from different rice varieties. Instant rice with a smooth and densely packed cross-section showed slower starch digestibility than those with a porous and loosely packed structure. All samples displayed B + V type crystallinity, with V-type crystallinity negatively correlating with maximum starch digested percentage. After digestion, starch chain-length distributions were significantly altered: rapidly digested starch comprised long amylose and short amylopectin chains, while slowly digested starch comprised chains with a peak degree of polymerization (DP) around 130. These results indicate that instant rice with a compact microstructure, high V-type crystallinity, and DP 130 fractions during digestion can reduce starch digestibility. This study provides insights for food industry to develop instant rice products with slow starch digestibility, potentially improving human health.
PubMed: 38876074
DOI: 10.1016/j.foodchem.2024.140074 -
Carbohydrate Polymers Sep 2024Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and...
Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and rheology of cooked rice, and are related to metabolic health and consumer preference. Here, the mechanism of how molecular structural features of pure amylopectin (waxy) starches affect starch properties was explored. Following debranching, chain-length distributions of seven waxy varieties were measured using size-exclusion chromatography, and parameterized using biosynthesis-based models, which involve breaking up the chain-length distribution into contributions from five enzyme sets covering overlapping ranges of chain length; structure-property correlations involving the fifth set were found to be statistically significant. Digestibility was measured in vitro, and parameters for the slower and longer digestion phase quantified using non-linear least-squares fitting. The coefficient for the significant correlation involving amylopectin fine structure for the fifth set was -0.903, while the amounts of amylopectin short and long chains were found to dominate breakdown viscosity (correlation coefficients 0.801 and - 0.911, respectively). This provides a methodology for finding or developing healthier starch in terms of lower digestion rate, while also having acceptable palatability. As rice breeders can to some extent control CLDs, this can help the development of waxy rices with improved properties.
Topics: Oryza; Amylopectin; Viscosity; Amylose; Starch; Digestion; Rheology
PubMed: 38823928
DOI: 10.1016/j.carbpol.2024.122264 -
Carbohydrate Polymers Sep 2024The escalating demand for environmentally sustainable and cost-effective adhesives in the wood processing and manufacturing sector has prompted exploration into...
The escalating demand for environmentally sustainable and cost-effective adhesives in the wood processing and manufacturing sector has prompted exploration into innovative solutions. This study introduces a novel gel adhesive composed of chemically unmodified high-amylose starch (G70, with 68 % amylose content) with a minimal proportion of urea-formaldehyde (UF) (UF/starch = 1:10, w/w). This G70/UF gel demonstrates remarkable adhesive capabilities for wooden boards under both dry conditions (with a shear stress of 4.13 ± 0.12 MPa) and wet conditions (with a shear strength of 0.93 ± 0.07 MPa after 2 h of water soaking). The study unveils that the elevated amylose content in the starch, coupled with a meticulously controlled isothermal process during bonding, is crucial for these enhancements. Specifically, the robust cohesion of amylose chains expedites phase separation between starch and UF, while the isothermal process facilitates the migration and enrichment of UF molecules at the gel-board and gel-air interfaces. Lacking these mechanisms, conventional amylopectin-rich starch/UF gels (27 % amylose content) show minimal improvement. Moreover, the G70/UF gel showcases exceptional fire retardancy. In all, the G70/UF gel presents a promising alternative for plywood production, reducing reliance on unhealthy UF resin while offering satisfactory bonding resistance in diverse conditions and superior flame retardancy.
PubMed: 38823915
DOI: 10.1016/j.carbpol.2024.122247 -
International Journal of Biological... May 2024The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact... (Review)
Review
The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch.
PubMed: 38823738
DOI: 10.1016/j.ijbiomac.2024.132765 -
Applied Microbiology and Biotechnology May 2024Mycotoxin production by aflatoxin B1 (AFB1) -producing Aspergillus flavus Zt41 and sterigmatocystin (ST) -hyperproducer Aspergillus creber 2663 mold strains on corn and...
Mycotoxin production by aflatoxin B1 (AFB1) -producing Aspergillus flavus Zt41 and sterigmatocystin (ST) -hyperproducer Aspergillus creber 2663 mold strains on corn and rice starch, both of high purity and nearly identical amylose-amylopectin composition, as the only source of carbon, was studied. Scanning electron microscopy revealed average starch particle sizes of 4.54 ± 0.635 µm and 10.9 ± 2.78 µm, corresponding to surface area to volume ratios of 127 1/µm for rice starch and 0.49 1/µm for corn starch. Thus, a 2.5-fold difference in particle size correlated to a larger, 259-fold difference in surface area. To allow starch, a water-absorbing powder, to be used as a sole food source for Aspergillus strains, a special glass bead system was applied. AFB1 production of A. flavus Zt41 was determined to be 437.6 ± 128.4 ng/g and 90.0 ± 44.8 ng/g on rice and corn starch, respectively, while corresponding ST production levels by A. creber 2663 were 72.8 ± 10.0 µg/g and 26.8 ± 11.6 µg/g, indicating 3-fivefold higher mycotoxin levels on rice starch than on corn starch as sole carbon and energy sources. KEY POINTS: • A glass bead system ensuring the flow of air when studying powders was developed. • AFB1 and ST production of A. flavus and A. creber on rice and corn starches were studied. • 3-fivefold higher mycotoxin levels on rice starch than on corn starch were detected.
Topics: Oryza; Zea mays; Starch; Aspergillus; Aspergillus flavus; Aflatoxin B1; Sterigmatocystin; Microscopy, Electron, Scanning; Particle Size; Mycotoxins; Glass
PubMed: 38809353
DOI: 10.1007/s00253-024-13190-7 -
Materials (Basel, Switzerland) May 2024The use of solar interface evaporation for seawater desalination or sewage treatment is an environmentally friendly and sustainable approach; however, achieving...
The use of solar interface evaporation for seawater desalination or sewage treatment is an environmentally friendly and sustainable approach; however, achieving efficient solar energy utilization and ensuring the long-term stability of the evaporation devices are two major challenges for practical application. To address these issues, we developed a novel ceramic fiber@bioderived carbon composite aerogel with a continuous through-hole structure via electrospinning and freeze-casting methods. Specifically, an aerogel was prepared by incorporating perovskite oxide (Ca.La.Dy.)CrO ceramic fibers (CCFs) and amylopectin-derived carbon (ADC). The CCFs exhibited remarkable photothermal conversion efficiencies, and the ADC served as a connecting agent and imparted hydrophilicity to the aerogel due to its abundant oxygen-containing functional groups. After optimizing the composition and microstructure, the (Ca.La.Dy.)CrO ceramic fiber@biomass-derived carbon aerogel demonstrated remarkable properties, including efficient light absorption and rapid transport of water and solutes. Under 1 kW m light intensity irradiation, this novel material exhibited a high temperature (48.3 °C), high evaporation rate (1.68 kg m h), and impressive solar vapor conversion efficiency (91.6%). Moreover, it exhibited long-term stability in water evaporation even with highly concentrated salt solutions (25 wt%). Therefore, the (Ca.La.Dy.)CrO ceramic fiber@biomass-derived carbon aerogel holds great promise for various applications of solar interface evaporation.
PubMed: 38793275
DOI: 10.3390/ma17102205