-
ACS Applied Materials & Interfaces Jun 2024Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were...
Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were designed to mediate the mineralization through enzyme activation for bone therapy. In this study, alkaline phosphatase (ALP) was harbored in the porous BVs by adsorption (Ad-BVs) or entrapment (En-BVs). High encapsulation of ALP on En-BVs was effectively self-activating by calcium ions of CaGP-modified PU that specifically hydrolyzed the organophosphorus (CaGP) to inorganic phosphate, thus promoting the formation of the highly oriented bone-like apatite . Enzyme-catalyzed kinetics confirms the regulation of apatite crystallization by the synergistic action of self-activated ALP and the confined microcompartments of BVs. This leads to a supersaturated microenvironment, with the En-BVs group exhibiting inorganic phosphate (Pi) levels 4.19 times higher and Ca levels 3.67 times higher than those of simulated body fluid (SBF). Of note, the En-BVs group exhibited excellent osteo-inducing differentiation of BMSCs and the highest maturity with reduced bone loss in rat femoral defect . This innovative strategy of biomimetic vesicles is expected to provide valuable insights into the enzyme-activated field of bone therapy.
PubMed: 38900067
DOI: 10.1021/acsami.4c03978 -
Materials (Basel, Switzerland) Jun 2024Surface treatment of implants facilitates osseointegration, with nanostructured surfaces exhibiting accelerated peri-implant bone regeneration. This study compared...
Surface treatment of implants facilitates osseointegration, with nanostructured surfaces exhibiting accelerated peri-implant bone regeneration. This study compared bone-to-implant contact (BIC) in implants with hydroxyapatite (HA), sand-blasted and acid-etched (SLA), and SLA with calcium (Ca)-coated (XPEED) surfaces. Seventy-five disk-shaped grade 4 Ti specimens divided into three groups were prepared, with 16 implants per group tested in New Zealand white rabbits. Surface characterization was performed using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), digital microscopy, and a contact angle analyzer. Cell viability, proliferation, and adhesion were assessed using MC3T3-E1 cells. Apatite formation was evaluated using modified simulated body fluid (m-SBF) incubation. After 4 weeks of healing, the outcomes reviewed were BIC, bone area (BA), removal torque tests, and histomorphometric evaluation. A microstructure analysis revealed irregular pores across all groups, with the XPEED group exhibiting a nanostructured Ca-coated surface. Surface characterization showed a crystalline CaTiO layer on XPEED surfaces, with evenly distributed Ca penetrating the implants. All surfaces provided excellent environments for cell growth. The XPEED and SLA groups showed significantly higher cell density and viability with superior osseointegration than HA ( < 0.05); XPEED exhibited the highest absorbance values. Thus, XPEED surface treatment improved implant performance, biocompatibility, stability, and osseointegration.
PubMed: 38893971
DOI: 10.3390/ma17112707 -
Molecules (Basel, Switzerland) May 2024Bone tissue engineering (BTE) is the most promising strategy to repair bones injuries and defects. It relies on the utilization of a temporary support to host the cells...
Bone tissue engineering (BTE) is the most promising strategy to repair bones injuries and defects. It relies on the utilization of a temporary support to host the cells and promote nutrient exchange (i.e., the scaffold). Supercritical CO assisted drying can preserve scaffold nanostructure, crucial for cell attachment and proliferation. In this work, agarose aerogels, loaded with hydroxyapatite were produced in view of BTE applications. Different combinations of agarose concentration and hydroxyapatite loadings were tested. FESEM and EDX analyses showed that scaffold structure suffered from partial closure when increasing filler concentration; hydroxyapatite distribution was homogenous, and Young's modulus improved. Looking at BTE applications, the optimal combination of agarose and hydroxyapatite resulted to be 1% / and 10% /, respectively. Mechanical properties showed that the produced composites could be eligible as starting scaffold for BTE, with a Young's Modulus larger than 100 kPa for every blend.
Topics: Sepharose; Tissue Engineering; Durapatite; Tissue Scaffolds; Bone and Bones; Elastic Modulus; Gels; Humans; Materials Testing; Biocompatible Materials
PubMed: 38893374
DOI: 10.3390/molecules29112498 -
Chemphyschem : a European Journal of... Jun 2024The paper describes an investigation of phase decomposition of apatite lattice doped with rare earth ions (cerium, samarium, and holmium) at temperatures ranging from 25...
The paper describes an investigation of phase decomposition of apatite lattice doped with rare earth ions (cerium, samarium, and holmium) at temperatures ranging from 25 to 1200 ºC. The rare-earth ion-doped apatite minerals were synthesized using sol-gel method. In situ high-temperature powder X-ray diffraction (XRD) was used to observe phase changes and the lattice parameters were analyzed to ascertain the crystallographic transformations. The expansion coefficient of the compounds was determined, and it was found that the c-axis was the most expandable due to relatively weak chemical bonds along the c-crystallographic axis. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to examine the decomposition properties of the materials. Due to rare earth ion doping, the produced materials had slightly variable decomposition behaviour. The cerium and samarium ions were present in multiple oxidation states (Ce3+, Ce4+, Sm3+, Sm2+), whereas only Ho3+ ions were observed. Rare earth ion substitution affects tri-calcium phosphate proportion during decomposition by regulating concentrations of vacancies. X-ray photoelectron spectroscopy (XPS) analysis indicated that cerium and samarium ion-doped apatite yielded only 25% tricalcium phosphate during decomposition. This finding advances our understanding of apatite structures, with implications for various high-temperature processes like calcination, sintering, hydrothermal processing, and plasma spraying.
PubMed: 38887191
DOI: 10.1002/cphc.202400109 -
BMC Oral Health Jun 2024This study evaluated the clinical benefits of adding NanoBone with split-crest technique and simultaneous implant placement covered with platelet-rich fibrin membrane in... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
Tomographic assessment of bone changes in atrophic maxilla treated by split-crest technique and dental implants with platelet-rich fibrin and NanoBone versus platelet-rich fibrin alone: Randomized controlled trial.
BACKGROUND
This study evaluated the clinical benefits of adding NanoBone with split-crest technique and simultaneous implant placement covered with platelet-rich fibrin membrane in horizontally deficient maxillary ridges in terms of crestal and horizontal bone changes and patient morbidity.
METHODS
Forty patients indicated for maxillary ridge splitting and simultaneous implant placement were assigned randomly to the study groups: control group (Platelet Rich Fibrin membrane) and test group (Platelet Rich Fibrin membrane + Nanobone). The Cone Beam Computed Tomography Fusion technique was utilized to assess crestal and horizontal bone changes after five months of the surgical procedure. Patient morbidity was recorded for one week post-surgical.
RESULTS
Five months post-surgical, buccal crestal bone resorption was 1.26 ± 0.58 mm for the control group and 1.14 ± 0.63 mm for the test group. Lingual crestal bone resorption was 1.40 ± 0.66 mm for the control group and 1.47 ± 0.68 mm for the test group. Horizontal bone width gain was 1.46 ± 0.44 mm for the control group and 1.29 ± 0.73 mm for the test group. There was no significant statistical difference between study groups regarding crestal and horizontal bone changes and patient morbidity.
CONCLUSIONS
The tomographic assessment of NanoBone addition in this study resulted in no statistically significant difference between study groups regarding crestal and horizontal bone changes and patient morbidity. More randomized controlled clinical trials on gap fill comparing different bone grafting materials versus no grafting should be conducted.
GOV REGISTRATION NUMBER
NCT02836678, 13 January 2017.
Topics: Humans; Platelet-Rich Fibrin; Male; Female; Cone-Beam Computed Tomography; Maxilla; Middle Aged; Alveolar Bone Loss; Dental Implants; Adult; Alveolar Ridge Augmentation; Dental Implantation, Endosseous; Aged; Minerals; Follow-Up Studies; Drug Combinations; Silicon Dioxide; Durapatite
PubMed: 38877464
DOI: 10.1186/s12903-024-04420-5 -
The Science of the Total Environment Sep 2024Manufactured soils, created by combining various organic and inorganic waste materials and byproducts, may be tailored to specific applications, providing an alternative...
Manufactured soils, created by combining various organic and inorganic waste materials and byproducts, may be tailored to specific applications, providing an alternative to the extraction of natural soils. It is important for them to be capable of supporting plant growth without the need for significant management or fertiliser applications, the over-application of which can have adverse environmental effects. We examined the dynamics of phosphorus (P) transformations within a manufactured soil and the implications for nutrient cycling. A freshly prepared manufactured soil (32.5 % composted green waste, 32.5 % composted bark, 25 % horticultural grit, and 10 % lignite clay) was studied over one year in temperature and moisture controlled mesocosms. Leachate was collected to achieve high-resolution monitoring of leached phosphate concentrations. Initially, leached dissolved inorganic phosphorus (DIP) concentrations were low (0.02 ± 0.01 mg P L), before increasing by 160 μg P L d over the first 42 days to 5.57 ± 1.23 mg P L. After reaching a maximum concentration, DIP concentrations remained relatively consistent, varying by only 1.67 mg P L until day 270. The increase in leached DIP was likely driven by soil organic matter mineralisation and the cleavage of carbon‑phosphorus bonds by the soil microbes to satisfy carbon demand with mineralogical influences, such as a decrease in apatite content, also contributing. Sorption and desorption from soil particles were the processes behind the P loss from the soil, which was followed by slow diffusion and eventual loss via leaching. The fertiliser application on phosphate dynamics resulted in increased DIP leaching. P concentrations observed in the manufactured soil were within the range considered sufficient to support plant growth. However, the mean leached phosphorus concentrations were higher than reported eutrophication thresholds suggesting that these soils may pose a risk to surface waters in their current form.
PubMed: 38876349
DOI: 10.1016/j.scitotenv.2024.173979 -
Nanoscale Jun 2024Nanohydroxyapatite (nHAp) has attracted significant attention for its tumor suppression and tumor microenvironment modulation capabilities. However, a strong tendency to...
Nanohydroxyapatite (nHAp) has attracted significant attention for its tumor suppression and tumor microenvironment modulation capabilities. However, a strong tendency to aggregate greatly affects its anti-tumor efficiency. To address this issue, a hydrogel platform consisting of thiolated hyaluronic acid (HA-SH) modified nanohydroxyapatite (nHAp-HA) and HA-SH was developed for sustained delivery of nHAp for melanoma therapy. The hydrophilic and negatively charged HA-SH significantly improved the size dispersion and stability of nHAp in aqueous media while conferring nHAp targeting effects. Covalent sulfhydryl self-cross-linking between HA-SH and nHAp-HA groups ensured homogeneous dispersion of nHAp in the matrix material. Meanwhile, the modification of HA-SH conferred the targeting properties of nHAp and enhanced cellular uptake through the HA/CD44 receptor. The hydrogel platform could effectively reduce the aggregation of nHAp and release nHAp in a sustained and orderly manner. Antitumor experiments showed that the modified nHAp-HA retained the tumor cytotoxicity of nHAp and inhibited the growth of highly malignant melanomas up to 78.6% while being able to induce the differentiation of macrophages to the M1 pro-inflammatory and antitumor phenotype. This study will broaden the application of nanohydroxyapatite in tumor therapy.
Topics: Durapatite; Hyaluronic Acid; Hydrogels; Animals; Mice; Melanoma; Cell Line, Tumor; Humans; Hyaluronan Receptors; Antineoplastic Agents; Nanoparticles; RAW 264.7 Cells
PubMed: 38869001
DOI: 10.1039/d4nr01696c -
Inorganic Chemistry Jun 2024Britholites are the lanthanide-silica-rich end-members of the apatite group, commonly studied for their optical properties. Here, we show ∼50-100 μm single crystals...
Britholites are the lanthanide-silica-rich end-members of the apatite group, commonly studied for their optical properties. Here, we show ∼50-100 μm single crystals synthesized hydrothermally at 650-500 °C and 500-300 MPa composed of a solid solution between CaPr(SiO)F-fluorbritholite and CaPr(SiO)O-oxybritholite, with a significant carbonate component substitution, via C replacing Si. Single-crystal X-ray diffraction and density functional theory computations show that a planar carbonate group occupies the face of a now-vacant silica tetrahedron. This modifies Pr-O bond lengths, diversifying lanthanide optical emission wavelengths. Our britholite was synthesized in geologically reasonable conditions and compositions, suggesting that carbonated oxybritholites could exist as yet-unrecognized natural minerals.
PubMed: 38867694
DOI: 10.1021/acs.inorgchem.4c01490 -
ACS Applied Materials & Interfaces Jun 2024In this work, the hydroxyapatite (HA) microspheres are utilized as carriers for 8-hydroxyquinoline (8-HQ) inhibitors with a sodium alginate-silver nitrate layer (Ag-SA)...
In this work, the hydroxyapatite (HA) microspheres are utilized as carriers for 8-hydroxyquinoline (8-HQ) inhibitors with a sodium alginate-silver nitrate layer (Ag-SA) added to confer chloride-responsive properties. These 8-HQ@Ag-SA-HA microspheres are subsequently integrated into poly(lactic acid) (PLA) coatings to produce biocompatible coatings. The resulting 8-HQ@Ag-SA-HA microsphere exhibits a spherical structure with a diameter of 3.16 μm. Thermogravimetric analysis indicates that the encapsulated 8-HQ inhibitors are approximately 11.83 wt %. Furthermore, the incorporation of these microspheres fills the micropores within the PLA coating, leading to a denser coating surface, enhanced wettability (contact angle value = 88°), and improved adhesion strength, thereby reinforcing the physical barrier effect. Corrosion tests reveal that the coatings exhibit increased resistance to corrosion in simulated body fluid (SBF) solutions. The released 8-HQ inhibitors in response to chloride ions form a protective layer of Mg(HQ), providing the coatings with self-healing properties and ensuring their durability in the SBF environment. Additionally, the cell test demonstrates a significant presence of MG-63 cells, accompanied by a low hemolysis rate of 3.81%, confirming the exceptional biocompatibility of the coatings. These findings offer valuable insights into the development of stimuli-responsive biocompatible coatings for effectively protecting Mg alloys.
Topics: Alloys; Humans; Coated Materials, Biocompatible; Magnesium; Chlorides; Durapatite; Corrosion; Microspheres; Alginates; Polyesters
PubMed: 38867413
DOI: 10.1021/acsami.4c00797 -
International Journal of Pharmaceutics Jun 2024The present work reports the adsorption, release, antibacterial properties, and in vitro cytotoxicity of sodium fusidate (SF) associated with a carbonated calcium...
The present work reports the adsorption, release, antibacterial properties, and in vitro cytotoxicity of sodium fusidate (SF) associated with a carbonated calcium phosphate bone cement. The adsorption study of SF on cement powder compared to stoichiometric hydroxyapatite and nanocrystalline carbonated apatite was investigated to understand the interaction between this antibiotic and the calcium phosphate phases involved in the cement formulation and setting reaction. The adsorption data revealed a fast kinetic process. However, the evolution of the amount of adsorbed SF was well described by a Freundlich-type isotherm characterized by a low adsorption capacity of the materials toward the SF molecule. The in vitro release results indicated a prolonged and controlled SF release for up to 34 days. The SF amounts eluted daily were at a therapeutic level (0.5-2 mg/L) and close to the antibiotic minimum inhibitory concentration (0.1-0.9 mg/L). Furthermore, the release data fitting and modeling suggested that the drug release occurred mainly by a diffusion mechanism. The antibacterial activity showed the effectiveness of SF released from the formulated cements against Staphylococcus aureus. Furthermore, the biological in vitro study demonstrated that the tested cements didn't show any cytotoxicity towards human peripheral blood mononuclear cells and did not significantly induce inflammation markers like IL-8.
PubMed: 38866083
DOI: 10.1016/j.ijpharm.2024.124331