-
Imaging Science in Dentistry Jun 2024This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate...
PURPOSE
This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images.
MATERIALS AND METHODS
The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis.
RESULTS
Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants (64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region.
CONCLUSION
The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.
PubMed: 38948187
DOI: 10.5624/isd.20230258 -
Imaging Science in Dentistry Jun 2024Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine...
PURPOSE
Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine the distance between the cementoenamel junction and the PSAA, as well as to identify factors influencing the detection of the PSAA on cone-beam computed tomography (CBCT).
MATERIALS AND METHODS
In total, 254 CBCT scans of maxillary sinuses, acquired with 2 different scanners, were examined to identify the PSAA. The distance from the cementoenamel junction (CEJ) to the PSAA was recorded at each maxillary posterior tooth position. Binomial logistic regression and multiple linear regression were employed to evaluate the effects of scanner type, CBCT parameters, sex, and age on PSAA detection and CEJ-PSAA distance, respectively. -values less than 0.05 were considered to indicate statistical significance.
RESULTS
The mean CEJ-PSAA distances at the second molar, first molar, second premolar, and first premolar positions were 17.0±4.0 mm, 21.8±4.1 mm, 19.5±4.7 mm, and 19.9±4.9 mm for scanner 1, respectively, and 17.3±3.5 mm, 16.9±4.3 mm, 18.5±4.1 mm, and 18.4±4.3 mm for scanner 2. No independent variable significantly influenced PSAA detection. However, tooth position (b=-0.67, <0.05) and scanner type (b=-1.3, <0.05) were significant predictors of CEJ-PSAA distance.
CONCLUSION
CBCT-based estimates of CEJ-PSAA distance were comparable to those obtained in previous studies involving cadavers, CT, and CBCT. The type of CBCT scanner may slightly influence this measurement. No independent variable significantly impacted PSAA detection.
PubMed: 38948184
DOI: 10.5624/isd.20230160 -
Clinical, Cosmetic and Investigational... 2024Medication-related osteonecrosis of the jaw (MRONJ) can be a debilitating complication that can arise in patients who took or are taking antiresorptive (including...
Medication-related osteonecrosis of the jaw (MRONJ) can be a debilitating complication that can arise in patients who took or are taking antiresorptive (including bisphosphonates) or antiangiogenic agents, leading to visible bone or a fistula that continues for more than eight weeks, without any history of radiotherapy. This clinical case aimed to describe the treatment of MRONJ with topical active oxygen therapy using bluem oral gel. A 63-year-old female patient that had been taking weekly sodium alendronate (70 mg) for four years by oral via, presented discomfort and implant movement in the #46 region, by that underwent surgical extraction of the implant. After three months the patient returned and was diagnosed with MRONJ. Initially, conventional therapies were performed, including surgical debridement and antibiotic therapy, but without success. The patient still had clinical signs of osteonecrosis six months after the implant extraction. The entire socket was then filled with bluem oral gel by topical application. The patient was instructed to continue applying the gel to the region every 8 hours for 15 days. After this period, the patient returned, and it was observed that the wound was in the healing process, with the presence of epithelialized tissue and without bone exposure. The 2-year clinical follow-up showed the lesion had healed entirely, and a new implant was installed. After the osseointegration period, the final prosthesis was placed. The patient remains under clinical follow-up. Therefore, it can be concluded that the application of bluem oral gel in this clinical case assisted in the recovery of the osteonecrosis lesion.
PubMed: 38947864
DOI: 10.2147/CCIDE.S462051 -
Cureus May 2024This case report describes the care given to a 58-year-old male patient with severe upper jaw atrophy. The treatment strategy involved utilizing zygomatic implants in...
This case report describes the care given to a 58-year-old male patient with severe upper jaw atrophy. The treatment strategy involved utilizing zygomatic implants in conjunction with endosteal implants to rehabilitate both the maxilla and mandible. Temporary prostheses were used during the healing phase, followed by the fabrication and placement of final prostheses. The utilization of zygomatic implants offers advantages such as immediate stabilization and function without the need for extensive bone grafting. This approach not only reduces treatment time and costs but also enhances patient outcomes. Furthermore, guided surgical techniques are increasingly employed to ensure precise implant placement, optimizing prosthetic support.
PubMed: 38947601
DOI: 10.7759/cureus.61430 -
Journal of Indian Prosthodontic Society Jul 2024Studies have not been done to evaluate the peri-implant stress exerted by materials(like PEEK and resin matrix ceramics) in different osseointegration conditions. To...
AIM
Studies have not been done to evaluate the peri-implant stress exerted by materials(like PEEK and resin matrix ceramics) in different osseointegration conditions. To investigate the effect of different occlusal materials on peri-implant stress distribution with different osseointegration condition using finite element analysis.
SETTINGS AND DESIGN
Eighteen different 3D FEA models of implant fixed with abutment were created involving 6 different occlusal materials (Heat cured temporary acrylic resin (PMMA), Bis-GMA, PEEK, Lithium disilicate, Resin matrix ceramics and translucent Zirconia) and different osseointegrated conditions (50%, 75%, 100%).
MATERIALS AND METHODS
Models were subjected to loading vertically and obliquely followed by evaluation of stress distribution.
STATISTICAL ANALYSIS USED
The results of the simulation obtained were analysed in terms of Von mises, maximum principal and minimal principal stresses using descriptive stastistics.
RESULTS
PMMA (40.14 MPa on vertical loading and 66 MPa on oblique loading) resulted in the highest stresses and lithium disilicate (24 MPa on vertical loading and 52.40 MPa on oblique loading) resulted in least stresses among all the crown materials. Upon oblique loading, von Mises stress increases except for translucent zirconia and lithium disilicate (52.444 MPa on 50%, 47.733 MPa on 75%, and 43.973 MPa on 100% osseointegration). Minimal principal stress values decreased with increase in osseointegration upon oblique loading for PMMA, BisGMA, and PEEK.
CONCLUSION
Translucent zirconia and lithium disilicate offer a better stress transmission. Minimal principal stress values of PEEK and BisGMA decreased with increasing osseointegration.
Topics: Finite Element Analysis; Osseointegration; Dental Materials; Dental Implants; Zirconium; Humans; Dental Porcelain; Ceramics; Materials Testing; Stress, Mechanical; Dental Stress Analysis; Polymethyl Methacrylate; Polymers
PubMed: 38946514
DOI: 10.4103/jips.jips_424_23 -
Journal of Indian Prosthodontic Society Jul 2024Synthetic inorganic materials are commonly used as reinforcing agents in polyetheretherketone (PEEK) composite, whereas natural organic plant-based reinforcing agents... (Comparative Study)
Comparative Study
Comparative evaluation on surface nanohardness, surface microhardness, surface roughness, and wettability of plant-based organic nanoparticle reinforced polyetheretherketone as an implant material - An in vitro study.
AIM
Synthetic inorganic materials are commonly used as reinforcing agents in polyetheretherketone (PEEK) composite, whereas natural organic plant-based reinforcing agents are negligible. Surface hardness, roughness, and wettability are indicative factors of osseointegration behavior to be used as an implant material. This study evaluated micro surface hardness (MSH), nano surface hardness (NSH), surface roughness (SR), and contact angle (CA) of PEEK-Azadirachta indica reinforced at 10 wt%, 20 wt%, and 30 wt%.
SETTINGS AND DESIGN
This was an in vitro study.
MATERIALS AND METHODS
Neem (A. indica) leaf nanoparticles were prepared and reinforced with PEEK powder at 10%, 20%, and 30% weight ratios by injection molding. Sixty specimens underwent the microhardness and CA testing using a digital microhardness tester, and CA goniometer, respectively, and later nanoindentation test to analyze the nanohardness and SR.
STATISTICAL ANALYSIS USED
A one-way ANOVA test with a 95% confidence interval for MSH and NSH, SR, and CA was performed on the samples. A post hoc Bonferroni test was conducted (α = 0.05) to compare the groups.
RESULTS
There was a significant increase in nanohardness (P = 0.000) with zero difference in microhardness (P = 0.514). The addition of 10 wt%, 20 wt%, and 30 wt% nanoparticles increased the SR value of the pure PEEK from 273.19 nm to 284.10 (3.99%), 296.91 (8.68%), and 287.54 (5.24%), respectively. In the analysis of the CA, CA 20% shows the lowest angle (63.69) with the highest for control specimens (82.39). There is an increase in the PEEK composite SR with a decrease in CA.
CONCLUSIONS
The addition of plant-derived nanoparticles into the PEEK matrix has a significant impact on the hardness and hydrophobicity enhancing cell growth and osteoblastic differentiation during osseointegration of dental implants.
Topics: Benzophenones; Polyethylene Glycols; Polymers; Ketones; Nanoparticles; Surface Properties; Wettability; Hardness; In Vitro Techniques; Dental Implants; Materials Testing; Plant Leaves
PubMed: 38946507
DOI: 10.4103/jips.jips_511_23 -
Journal of Indian Prosthodontic Society Jul 2024The present systematic review compares the stability, crestal bone levels and efficacy of osseodensification (OD) drilling techniques for dental implant placement to... (Comparative Study)
Comparative Study
AIM
The present systematic review compares the stability, crestal bone levels and efficacy of osseodensification (OD) drilling techniques for dental implant placement to traditional drilling methods.
SETTINGS AND DESIGN
The Cochrane online library, PubMed, Scopus, and other well-known online resources are used in the research. Using a systematic review design, the current study examines published qualitative studies with an emphasis on analysis.
MATERIALS AND METHODS
Using precise keywords, a thorough search of pertinent databases was carried out in accordance with PRISMA standards. Studies testing dental implant stability, crestal bone levels and clinical results using both OD and traditional procedures were covered by the inclusion criteria.
STATISTICAL ANALYSIS USED
The risk of bias and quality of included studies was assessed using the Newcastle-Ottawa Scale for observational studies and the Cochrane Risk of Bias tool for randomized controlled trials.
RESULTS
A total of 170 patients and 334 implants from Egypt, India, and Brazil were included in eight papers that made up the systematic review. In several clinical situations, osseodensification outperformed standard drilling in terms of implant durability, bone development, and torque data. Statistical analysis presented the lowest risks, while blinded outcome assessment, allocation concealment, random sequence generation, incomplete outcome data and experimental technique revealed higher risks. Bias assessment found various risks across different components.
CONCLUSION
The thorough examination of eight papers demonstrates that osseodensification is a technique with great promise in the field of dental implants. It exhibits superior torque values, bone development, and stability when compared to traditional drilling. The overall results highlight the potential of osseodensification to improve clinical outcomes and advance the science of dental implantology, even in the face of variances in bias concerns.
Topics: Humans; Dental Implants; Dental Implantation, Endosseous; Osseointegration
PubMed: 38946504
DOI: 10.4103/jips.jips_480_23 -
International Journal of Surgery Case... Jun 2024Odontogenic fibromyxoma (OFM) is a round and locally invasive neoplasm predominantly seen in the mandible. Though radiographic appearance is variable, definitive...
INTRODUCTION
Odontogenic fibromyxoma (OFM) is a round and locally invasive neoplasm predominantly seen in the mandible. Though radiographic appearance is variable, definitive diagnosis is based on correlation with histopathological examination. Surgical approach is the treatment of choice. For reconstruction, patient-specific implant (PSI) has lately been developed as a crucial help.
CASE PRESENTATION
This case report presents a 19 year old female patient with odontogenic fibromyxoma highlighting its clinical, radiographic, histopathological features along with rehabilitation using patient specific implants reducing the complexity and related morbidities of reconstructive procedures.
DISCUSSION
Surgical repair and reconstruction of defects in cranio-maxillofacial region is challenging. The described treatment eliminates the need for bone grafting, shows optimal results owing to the shorter rehabilitation time and more accurate fits.
CONCLUSION
This report introduces a novel technique whereby patient-specific implants are employed as the primary method of reconstruction following segmental resection.
PubMed: 38943941
DOI: 10.1016/j.ijscr.2024.109972 -
ACS Biomaterials Science & Engineering Jun 2024In addition to transmitting and carrying genetic information, RNA plays an important abiotic role in the world of nanomaterials. RNA is a natural polyanionic...
In addition to transmitting and carrying genetic information, RNA plays an important abiotic role in the world of nanomaterials. RNA is a natural polyanionic biomacromolecule, and its ability to promote osteogenesis by binding with other inorganic materials as an osteogenic induction agent was discovered only recently. However, whether it can promote osseointegration on implants has not been reported. Here, we investigated the effect of the RNA-containing coating materials on peri-implant osseointegration. Total RNA extracted from rat muscle tissue was used as an osteogenic induction agent, and hyaluronic acid (HA) was used to maintain its negative charge. In simulated body fluids (SBF), in vitro studies demonstrated that the resulting material encouraged calcium salt deposition. Cytological experiments showed that the RNA-containing coating induced greater cell adhesion and osteogenic differentiation in comparison to the control. The results of animal experiments showed that the RNA-containing coating had osteoinductive and bone conduction activities, which are beneficial for bone formation and osseointegration. Therefore, the RNA-containing coatings are useful for the surface modification of titanium implants to promote osseointegration.
PubMed: 38943625
DOI: 10.1021/acsbiomaterials.4c00133 -
Nigerian Journal of Clinical Practice Jun 2024Genioplasty, a key technique for dentofacial abnormalities, is essential for establishing facial harmony. This surgical procedure entails an osteotomy of the chin, which... (Review)
Review
Genioplasty, a key technique for dentofacial abnormalities, is essential for establishing facial harmony. This surgical procedure entails an osteotomy of the chin, which alters its three-dimensional location to restore overall face equilibrium. Modern genioplasty, which is frequently performed alone or in combination with rhinoplasty, facelifts, and orthognathic surgery, employs a variety of materials for chin augmentation, ranging from autologous to alloplastic. Recent improvements include porous graft materials such as high-density polyethylene. Despite the need for secure osteotomy segments, soft tissues around the mandible have a natural propensity to return to their original anatomical position. In the discipline of genioplasty, face esthetics and facial evaluation have been a prominent emphasis, with historical evidence emphasizing the relevance of the chin in harmony, balance, and character perception. Customized implants provide a single therapy for rare anatomical defects, generally with lower morbidity, making them critical for patients undergoing many procedures or suffering from syndromic disorders. Virtual surgical planning advances will continue to give dependable solutions for small and complex chin position issues. Modern surgeons will continue to combine history, anatomy, rigorous evaluation, excellent execution, and technological breakthroughs to achieve the best possible outcomes for their patients, raising their social standing.
Topics: Humans; Genioplasty; Chin; Osteotomy; Prostheses and Implants; Esthetics
PubMed: 38943291
DOI: 10.4103/njcp.njcp_24_24