-
The European Journal of Prosthodontics... Feb 2024Molar-incisor hypomineralisation (MIH) is a qualitative defect of the enamel structure. Indirect restorations may represent the most suitable therapeutic solutions for...
UNLABELLED
Molar-incisor hypomineralisation (MIH) is a qualitative defect of the enamel structure. Indirect restorations may represent the most suitable therapeutic solutions for patients presenting MIH with tooth restorative procedures. This systematic review aims to determine the feasibility of indirect restorations.
MATERIALS AND METHODS
A systematic review has been performed and is reported following the PRISMA guidelines. It was performed on three databases (PubMed, Science Direct, and Google Scholar). Ten articles were included.
RESULTS
Only two articles reported the use of CAD/CAM technologies, whereas the other eight preferred conventional registration and handmade stratification for ceramics. All indirect bonded restorations made of composite resins or ceramics had significant success rates. A temporary material was placed in most of the articles. There was no clear consensus for tissue conditioning before bonding. Depending on the authors and the articles, the follow-up period extended from 2 months to 6 years.
CONCLUSIONS
The survival rate and the non-invasive procedures of indirect restorations are two main arguments that can help dental practitioners in daily practice. Development of CAD/ CAM technologies adds new perspectives in the registration, the design and production. However, more clinical trials are needed to confirm the conclusions.
Topics: Humans; Composite Resins; Molar; Molar Hypomineralization; Dental Restoration Repair
PubMed: 37988613
DOI: 10.1922/EJPRD_2557Broutin11 -
The International Journal of... Feb 2024To evaluate the fabrication trueness, intaglio surface adaptation, and marginal integrity of resin-based onlay restorations made via additive manufacturing (AM) or...
PURPOSE
To evaluate the fabrication trueness, intaglio surface adaptation, and marginal integrity of resin-based onlay restorations made via additive manufacturing (AM) or subtractive manufacturing (SM).
MATERIALS AND METHODS
An onlay restoration was designed (DentalCAD Galway 3.0) and saved as an STL file to generate a design STL file (DO-STL). Using this design, 45 onlays were fabricated either with AM (3D-printed resin for definitive [AM-D; Tera Harz TC-80DP] and interim [AM-I; Freeprint temp] restorations) or SM (composite resin, Tetric CAD) technologies. Onlays were scanned with an intraoral scanner (CEREC Primescan SW 5.2), and the scans were saved as test STL files (TO-STLs). For trueness evaluation, TO-STLs were superimposed over the DO-STL, and root mean square (RMS) values of overall and intaglio surfaces were measured (Geomagic Control X). For the intaglio surface adaptation and marginal integrity, a triple-scan protocol was performed. Kolmogorov-Smirnov, one-way ANOVA, and post-hoc Tukey honestly significant difference tests were used to analyze data (α = .05).
RESULTS
RMS values of intaglio and overall surfaces, intaglio adaptation, and marginal integrity varied among test groups (P < .001). AM-D had the greatest overall surface RMS (P < .001), while SM had the greatest intaglio surface RMS (P < .001). SM had the highest average distance deviations for intaglio surface adaptation and marginal integrity, whereas AM-D had the lowest (P < .001).
CONCLUSIONS
AM-D onlays showed lower overall trueness than AM-I onlays and SM definitive onlays. However, AM-D onlays presented high intaglio surface trueness, intaglio surface adaptation, and marginal integrity.
Topics: Humans; Computer-Aided Design; Dental Prosthesis Design; Dental Marginal Adaptation; Inlays; Dental Care
PubMed: 37988421
DOI: 10.11607/ijp.8802 -
Journal of Dentistry Jan 2024To assess the long-term clinical outcome of posterior inlay-retained fixed dental prostheses (IRFDPs) with a modified design made from zirconia ceramic.
OBJECTIVES
To assess the long-term clinical outcome of posterior inlay-retained fixed dental prostheses (IRFDPs) with a modified design made from zirconia ceramic.
METHODS
In 30 patients thirty 3-unit IRFDPs were placed to replace 7 premolars (4 in the maxilla, 3 in the mandible), and 23 first molars (15 in the maxilla, 8 in the mandible). Preparations were accomplished in agreement with the general principles for ceramic inlay restorations and modified with a short retainer-wing bevel preparation within the enamel at the buccal and oral sides. The frameworks were milled from 3Y-TZP ceramic, and the pontics were veneered with feldspathic ceramic. All IRFDPs were bonded with a phosphate monomer containing luting resin after air-abrasion of the intaglio surfaces. The patients were recalled 6-12 months after placement, and then annually. Kaplan-Meier analysis was used to calculate the survival and complication rates of the IRFDPs.
RESULTS
The mean observation time was 10.6 ± 1.5 years. The 10-year cumulative survival rate was 89% with 4 failures, two of them were due to deep secondary caries with loss of retention, one due to repeated debonding with enamel fractures, and one due to generalized progressive periodontitis. The most common complication was chipping of the veneering ceramic (20.1%). Eighteen IRFDPs were free of any type of complication up to 15.4 years, which corresponds to a 10-year cumulative success rate of 70.4%.
CONCLUSION
The long-term clinical performance of modified IRFDPs made of veneered zirconia ceramics was favorable after 10 years, therefore, they represent a treatment alternative to replace posterior single missing teeth.
CLINICAL SIGNIFICANCE
Zirconia-based IRFDPs fabricated in the modified design may represent a substance-preserving alternative to conventional posterior FDPs to replace posterior single missing teeth, particularly in cases where implants cannot be placed, and when the adjacent teeth already have small restorations or defects.
Topics: Humans; Inlays; Dental Porcelain; Dental Restoration Failure; Ceramics; Zirconium; Denture, Partial, Fixed
PubMed: 37981045
DOI: 10.1016/j.jdent.2023.104781 -
BMC Sports Science, Medicine &... Nov 2023Due to climate change and major sport events in hot climate, temperature regulation during exercise is gaining relevance in professional and amateur sports. This study...
OBJECTIVES
Due to climate change and major sport events in hot climate, temperature regulation during exercise is gaining relevance in professional and amateur sports. This study compares the effects of an upper body garment with water-soaked inlays, of a synthetic- and of a cotton shirt on health, fluid balance and performance during a high intensity exercise session in the heat.
METHODS
32 healthy participants (age 25 ± 4 years; 15 women) were assigned to one of three upper body garments (cotton-shirt, synthetic-fiber-shirt, cooling-vest with water-soaked inlays) and underwent a high intensity steady state ergometer exercise test (Temperature 30.5 °C, frontal airflow 20 km/h, relative air-humidity 43 ± 13%). Time to exhaustion, physiologic parameters (inner ear temperature, heart rate, relative oxygen uptake, body weight, garment weight) and subjective data (perceived exertion, thermal sensation, skin wettedness, clothing humidity, feeling scale) were assessed. Time to exhaustion was analyzed using a survival time analysis. Other outcomes were evaluated using Kruskal-Wallis Tests and 95%-confidence-intervals.
RESULTS
Time to exhaustion was not different between groups. Cooling-vests were heavier and led to lower inner ear temperature, lower thermal- and higher clothing-humidity-sensation at the start of exercise. Physiologic and subjective parameters showed no group differences at exercise termination.
CONCLUSIONS
In a realistic setting including frontal airflow, synthetic and cotton-fiber shirts reach comparable effects on health and thermoregulation and are perceived as equally comfortable. Although inducing a small pre-exercise cooling effect, a water-soaked garment induces a weight penalty and creates a less comfortable situation.
PubMed: 37964323
DOI: 10.1186/s13102-023-00768-3 -
The Journal of Adhesive Dentistry Aug 2023The first objective was to determine if dual-curing of resin cement with reduced light could affect interfacial adaptations of zirconia restoration. The second objective...
PURPOSE
The first objective was to determine if dual-curing of resin cement with reduced light could affect interfacial adaptations of zirconia restoration. The second objective was to examine whether cement type and pretreatment method of universal adhesive affected interfacial adaptation. The final objective was to compare the polymerization degree of cement under different reduced-light conditions.
MATERIALS AND METHODS
Inlay cavities were prepared on extracted third molars. Translucent zirconia restorations were milled using Katana UTML (Kuraray Noritake) in three groups with restoration thicknesses of 1, 2, and 3 mm, respectively. Each group had three subgroups using different cementation methods. For subgroup 1, restorations were cemented with self-adhesive cement. For subgroup 2, universal adhesive was applied and light cured. After the restoration was seated with conventional resin cement, light curing was performed. For subgroup 3, after adhesive was applied, the restoration was seated with conventional resin cement. Light curing was performed for the adhesive and cement simultaneously. After thermocycling, interfacial adaptation at the restoration-tooth interface was investigated using swept-source optical coherence tomography imaging. Finally, polymerization shrinkage of the cement was measured using a linometer and compared under the conditions of different zirconia thicknesses and light-curing durations.
RESULTS
Interfacial adaptation varied signficantly depending on the zirconia thickness, pretreatment, polymerization mode and cements used (p < 0.05). The effects of the adhesive and polymerization shrinkage differed signficantly, depending on the reduced light under the zirconia (p < 0.05).
CONCLUSION
Lower curing-light irradiance may lead to inferior adaptation and lower polymerization of the cement. Polymerization of resin cement can differ depending on the light irradiance and exposure duration.
Topics: Resin Cements; Polymerization; Dental Cements; Glass Ionomer Cements
PubMed: 37910068
DOI: 10.3290/j.jad.b4586857 -
European Journal of Dental Education :... May 2024In fixed prosthodontics, simulators are essential to students for a progressive transition from preclinical to clinical condition. With the 3D printing technology, we...
INTRODUCTION
In fixed prosthodontics, simulators are essential to students for a progressive transition from preclinical to clinical condition. With the 3D printing technology, we developed resin bars allowing students to better visualise by motor chunking technique. Main objectives of this work were to describe this teaching methodology used in preclinic among different promotions of second, third and fourth dental years and to evaluate students' feedback.
MATERIALS AND METHODS
Two hundred seventy resin strips were digitally designed and printed in resin. All participants from second, third and fourth had to fulfil a User Experience Questionnaire (UEQ) after the preclinical work. The scales of this questionnaire covered the complete impression of the user experience. Both classical aspects of usability (efficiency, insight and reliability) and aspects of user experience (originality, stimulation) were measured.
RESULTS
For the second dental years, 'Attractiveness', 'Stimulation' and 'Novelty' were considered 'Excellent'. For the third dental year, novelty average was considered as 'Excellent'. For the fourth dental year, 'novelty' was considered as 'Good'.
DISCUSSION
The resin plates used in this study are original and stimulating for the students, especially for the second-year dental students who found the exercises useful for their learning. This method can also be used by creating scenarios close to the clinical situations encountered in dentistry departments (more dilapidated teeth, preparation of inlays, post and core, etc.). This 3D printed simulation model is not intended to replace the Frasaco® models but is a complement to the learning process.
Topics: Humans; Students, Dental; Prosthodontics; Motor Skills; Reproducibility of Results; Education, Dental; Printing, Three-Dimensional; Personal Satisfaction
PubMed: 37908156
DOI: 10.1111/eje.12961 -
Polymers Oct 2023As cementation represents the last stage of the work involved in making various indirect restorations (metal ceramic crowns and bridges, full ceramic crowns and bridges,... (Review)
Review
As cementation represents the last stage of the work involved in making various indirect restorations (metal ceramic crowns and bridges, full ceramic crowns and bridges, inlays, onlays, and fiber posts), its quality significantly contributes to the clinical success of the therapy performed. In the last two decades, the demand for ceramic indirect restorations in everyday dental practice has considerably increased primarily due to the growing significance of esthetics among patients, but also as a result of hypersensitivity reactions to dental alloys in some individuals. In this context, it is essential to ensure a permanent and reliable adhesive bond between the indirect restoration and the tooth structure, as this is the key to the success of aesthetic restorations. Resin-based luting materials benefit from excellent optical (aesthetic) and mechanical properties, as well as from providing a strong and durable adhesive bond between the restoration and the tooth. For this reason, resin cements are a reliable choice of material for cementing polycrystalline ceramic restorations. The current dental material market offers a wide range of resin cement with diverse and continually advancing properties. In response, we wish to note that the interest in the properties of resin-based cements among clinicians has existed for many years. Yet, despite extensive research on the subject and the resulting continued improvements in the quality of these materials, there is still no ideal resin-based cement on the market. The manuscript authors were guided by this fact when writing the article content, as the aim was to provide a concise overview of the composition, properties, and current trends, as well as some future guidelines for research in this field that would be beneficial for dental practitioners as well as the scientific community. It is extremely important to provide reliable and succinct information and guidelines for resin luting materials for dental dental practitioners.
PubMed: 37896400
DOI: 10.3390/polym15204156 -
Materials (Basel, Switzerland) Oct 2023The conformation of the recipient site for an inlay graft presents an increased contact with the parent bone compared to an onlay graft. This might favor bone growth...
BACKGROUND
The conformation of the recipient site for an inlay graft presents an increased contact with the parent bone compared to an onlay graft. This might favor bone growth within the inlay compared to onlay grafts. Hence, the objective of this study was to compare the bone incorporation and remodeling processes of xenogeneic en bloc grafts placed using two bone grafting techniques, i.e., onlay vs. inlay.
METHODS
In this prospective, randomized, split-mouth study (test and control sides in the same animal), two bone grafting techniques were comparatively evaluated. The lateral aspect of the rabbit mandible was used as the recipient site, bilaterally. On one side of the mandible, the cortical bone was perforated with drills to allow a better bone formation from the bone wound and the marrow spaces. A xenogeneic bone block was fixed in the center of the prepared region, representing the onlay site. On the other side of the mandible, a 7 mm wide and 3 mm deep circumferential defect was prepared using trephines and drills. A xenogeneic bone block was fixed in the center of the defect, representing the inlay site. Two healing periods were applied in the study: 2 and 10 weeks, each represented by 10 rabbits ( = 10 for each period).
RESULTS
After 2 weeks of healing, the mean percentage of new bone was 10.4% and 23.3% at the onlay and inlay grafts, respectively ( = 0.022). After 10 weeks of healing, new bone increased to 13.2% at the onlay sites and 25.4% at the inlay sites ( = 0.080). In the 10-week period, the inlay grafts presented a homogeneous growth of new bone in all regions, while in the onlay grafts, low percentages of new bone were observed in the external regions.
CONCLUSION
The percentage of new bone increased faster and was higher in the inlay grafts than in the onlay grafts. This outcome might be related to the self-contained conformation of the recipient site in the inlay group, which offered more sources for new bone formation compared to the one-wall conformation of the recipient sites in the onlay group. The osteoconductive properties of the biomaterial allowed the newly formed bone to reach the most peripheral regions in both groups. The osteoconductive properties of the biomaterial, together with the protection offered by the collagen membrane, allowed marginal closure of the defects by newly formed bone in the inlay group.
PubMed: 37895725
DOI: 10.3390/ma16206742 -
Operative Dentistry Nov 2023Computer-aided design/computer-aided manufacturing (CAD/CAM) systems are widely used in dental treatment. Clinicians can use chairside CAD/CAM technology, which has the...
OBJECTIVE
Computer-aided design/computer-aided manufacturing (CAD/CAM) systems are widely used in dental treatment. Clinicians can use chairside CAD/CAM technology, which has the advantage of being able to fabricate inlays on the same day. We aimed to evaluate the effects of crystallization firing processes, fabrication methods (one-step and two-step), and materials on marginal and internal adaptations of silicate-based glass-ceramic all-ceramic inlays fabricated with CAD/CAM chairside systems.
METHODS
Ten artificial mandibular left first molars were prepared with standardized ceramic class II mesialocclusal (MO) inlay cavities. Optical impressions were obtained using CEREC Omnicam Ban. IPS e-max CAD (IE), (Ivoclar Vivadent, Schaan, Liechtenstein), Initial LiSi Block (LS) (Hongo, Bunkyoku, Tokyo, Japan), VITA Suprinity (SP), (Vita Zahnfabrick, Bad Säckingen, Germany), and Celtra Duo (CD) (Ivoclar Vivadent, Schaan, Liechtenstein) (n=10) were milled using CEREC MC XL (Bensheim, Germany). IE and SP were crystallization-fired using CEREC Speed Fire. The silicone replica technique was used for the measurement of internal (axial and pulpal walls) and marginal (cervical and occlusal edge) adaptations. The adaptations were measured using a thin layer of light-body polyvinyl siloxane impression material placed between the master tooth inlay preparation and restoration. Marginal and internal adaptations of IE, LS, SP, and CD were measured using a stereomicroscope (500×). For IE and SP, marginal and internal adaptations were measured before and after the crystallization firing process. Data analyses were conducted using one-way ANOVA and the Tukey test. For IE and SP, marginal and internal adaptations before and after the crystallization firing process were analyzed using the t-test. The significance level was set at α=0.05.
RESULTS
One-way ANOVA revealed statistically significant differences in occlusal and cervical edge marginal adaptations among the material groups (p<0.001). The Tukey HSD test revealed a significant difference in marginal occlusal and cervical edge adaptations between LS and CD groups and IE and SP groups (p≤0.05). For IE and SP inlays, the t-test revealed a significant difference between occlusal and cervical edge adaptations before the crystallization firing process and those after the crystallization firing process, with the latter group showing a more significant discrepancy in adaptation than the former group (p≤0.05).
CONCLUSIONS
Fabrication methods (one- and two-step) affected the marginal adaptation compatibility but not internal compatibility of MO inlays. The crystallization firing process affected the marginal adaptation of inlays using lithium silicate or lithium disilicate glass-ceramics. However, adaptation to the cavity was considered clinically acceptable for all materials.
Topics: Inlays; Crystallization; Dental Marginal Adaptation; Dental Prosthesis Design; Materials Testing; Dental Porcelain; Ceramics; Computer-Aided Design; Silicates
PubMed: 37882476
DOI: 10.2341/22-120-L -
Clinical Oral Investigations Dec 2023Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to...
OBJECTIVES
Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to 8.3 years of clinical service.
MATERIALS AND METHODS
In this retrospective clinical study 143 lithium disilicate posterior restorations (IPS e.max Press) were examined according to the FDI criteria. A standardised questionnaire was used to determine patient satisfaction. The aesthetic outcome was evaluated by dentists and dental technicians using intraoral photographs. Data were descriptively analysed. Cumulative survival and success rates were calculated using Kaplan-Meier estimation.
RESULTS
The cumulative survival rate of lithium disilicate restorations was 97.5% after a mean service time of 5.9 years and 95.0% after 8.3 years. The cumulative success rate decreased from 94.4% after 5.9 years to 30.7% after 8.3 years. Repairs were required for 7 restorations (4.9%), and 5 (3.5%) were classified as failures. The results of the questionnaire indicate a high level of patient satisfaction. The subjective aesthetics were assessed more critically by dental technicians compared to dentists.
CONCLUSION
Lithium disilicate posterior restorations survived successfully up to 8.3 years when carried out by undergraduate students.
CLINICAL RELEVANCE
Pressed lithium disilicate glass ceramic inlays and partial crowns are reliable treatment options in posterior teeth.
Topics: Humans; Crowns; Retrospective Studies; Dental Restoration Failure; Esthetics, Dental; Dental Porcelain; Ceramics
PubMed: 37870592
DOI: 10.1007/s00784-023-05328-0