-
Clinical Oral Investigations Dec 2023Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to...
OBJECTIVES
Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to 8.3 years of clinical service.
MATERIALS AND METHODS
In this retrospective clinical study 143 lithium disilicate posterior restorations (IPS e.max Press) were examined according to the FDI criteria. A standardised questionnaire was used to determine patient satisfaction. The aesthetic outcome was evaluated by dentists and dental technicians using intraoral photographs. Data were descriptively analysed. Cumulative survival and success rates were calculated using Kaplan-Meier estimation.
RESULTS
The cumulative survival rate of lithium disilicate restorations was 97.5% after a mean service time of 5.9 years and 95.0% after 8.3 years. The cumulative success rate decreased from 94.4% after 5.9 years to 30.7% after 8.3 years. Repairs were required for 7 restorations (4.9%), and 5 (3.5%) were classified as failures. The results of the questionnaire indicate a high level of patient satisfaction. The subjective aesthetics were assessed more critically by dental technicians compared to dentists.
CONCLUSION
Lithium disilicate posterior restorations survived successfully up to 8.3 years when carried out by undergraduate students.
CLINICAL RELEVANCE
Pressed lithium disilicate glass ceramic inlays and partial crowns are reliable treatment options in posterior teeth.
Topics: Humans; Crowns; Retrospective Studies; Dental Restoration Failure; Esthetics, Dental; Dental Porcelain; Ceramics
PubMed: 37870592
DOI: 10.1007/s00784-023-05328-0 -
International Journal of Dentistry 2023Evaluating the level of dental students' competence is crucial for validating their preparedness for graduation. Confidence has a significant role in achieving...
Dental Students' Perception and Self-Perceived Confidence Level in Key Dental Procedures for General Practice and the Impact of Competency Implementation on Their Confidence Level, Part I (Prosthodontics and Conservative Dentistry).
BACKGROUND
Evaluating the level of dental students' competence is crucial for validating their preparedness for graduation. Confidence has a significant role in achieving competence. There are limited studies that assess the level of self-perceived confidence among final-year dental students regarding their ability to conduct key dental procedures. This study aims to assess the self-perceived confidence level of final-year dental students in performing essential dental procedures across various dental disciplines and to assess the effect of implementing competencies in the curriculum on the self-perceived confidence level of students by comparing two cohorts of final-year students in two different years 2016 (Traditional Cohort) and 2019 (Competencies Cohort).
MATERIALS AND METHODS
An questionnaire was answered by two cohorts of final-year dental students: one group in 2016 before the implementation of the competency-based assessment system (group 1, = 153), and the other in 2019 after the implementation of this system (group 2, = 199), the same questionnaire was used for both cohorts. The results from the two groups were compared regarding the degree of self-perceived confidence in conducting key dental procedures. The data were analysed using SPSS statistics and Levene's Test for Equality of Variances and -test for Equality of Means calculated.
RESULTS
Group 1 showed a significantly higher means of self-perceived confidence levels than group 2 in the ability to conduct seven out of the 20 prosthodontics procedures studied: providing patients with Cobalt-Chromium (Co-Cr) removable partial dentures (RPD) (3.77 vs. 3.56), providing the patient with Acrylic RPD (3.70 vs. 3.23), treatment planning for partially edentulous patients (3.83 vs. 3.34), giving OHIs for denture patients (4.17 vs. 3.95), dealing with CD postinsertion complaints (3.97 vs. 3.76), giving postinsertion instructions for removable prostheses cases (4.12 vs. 3.82), and providing patients with immediate dentures (2.67 vs. 2.32). The same applies to 6 out of 16 conservative dentistry procedures: placing anterior composite (4.41 vs. 4.12), placing posterior composite (4.43 vs. 3.88), placing posterior amalgam (4.29 vs. 4.02), placing matrix band for Class II restorations (4.24 vs. 3.71), placing a prefabricated post (3.34 vs. 2.88), and placing fiber post (3.45 vs. 3.34). On the other hand, group 2 shows higher means of self-perceived confidence than group 1 in only two conservative dentistry procedures: onlay restorations (2.18 vs. 2.76) and inlay restorations (2.22 vs. 2.75). No significant differences in means of self-perceived confidence were found between the two groups in the remaining 21 procedures studied.
CONCLUSIONS
This study has shown that final-year dental students have high self-perceived confidence levels in doing simple dental procedures yet less confidence in more complex ones. Although, students' self-perceived confidence decreases after the introduction of a competency-based assessment system. Competency implementation and execution criteria may differ between schools which may have an impact on final outcomes. Hence, there is a need for regular evaluation of competencies being assessed to maintain a curriculum that is up to date.
PubMed: 37868108
DOI: 10.1155/2023/2015331 -
Dental Materials : Official Publication... Jan 2024The unique structure of human teeth limits dental repair to custom-made solutions. The production process requires a lot of time and manpower. At present, artificial...
OBJECTIVE
The unique structure of human teeth limits dental repair to custom-made solutions. The production process requires a lot of time and manpower. At present, artificial intelligence (AI) has begun to be used in the medical field and improve efficiency. This study attempted to design a variety of dental restorations using AI and evaluate their clinical applicability.
METHODS
Using inlay and crown restoration types commonly used in dental standard models, we compared differences in artificial wax-up carving (wax-up), artificial digital designs (digital) and AI designs (AI). The AI system was designed using computer calculations, and the other two methods were designed by humans. Restorations were made by 3D printing resin material. Image evaluations were compared with cone beam computed tomography (CBCT) by calculating the root mean squared error.
RESULTS
Surface truth results showed that AI (68.4 µm) and digital-designed crowns (51.0 µm) had better reproducibility. Using AI for the crown reduced the time spent by 400% (compared to digital) and 900% (compared to wax-up). Optical microscopic and CBCT images showed that AI and digital designs had close margin gaps (p < 0.05). The margin gap of the crown showed that the wax-up group was 4.1 and 4.3 times greater than those of the AI and digital crowns, respectively. Therefore, the utilization of artificial intelligence can assist in the production of dental restorations, thereby enhancing both production efficiency and accuracy.
SIGNIFICANCE
It is expected that the development of AI can contribute to the reproducibility, efficiency, and goodness of fit of dental restorations.
Topics: Humans; Crowns; Computer-Aided Design; Artificial Intelligence; Reproducibility of Results; Dental Prosthesis Design
PubMed: 37858418
DOI: 10.1016/j.dental.2023.10.013 -
Operative Orthopadie Und Traumatologie Dec 2023Cementless medial unicondylar knee prostheses with mobile inlays have proved to be successful and are increasingly being used worldwide; however, there is a risk of...
THE PROBLEM
Cementless medial unicondylar knee prostheses with mobile inlays have proved to be successful and are increasingly being used worldwide; however, there is a risk of fracture of the medial tibial plateau in the postoperative healing phase.
THE SOLUTION
In most cases we observed split fractures starting from the keel of the implant. These can be treated with a small posteromedial locking plate, whereby the upper screws are inserted through the keel slot and then interlocked. This achieves an optimally strong bond between the implant and the screws and a stable construct.
SURGICAL TECHNIQUE
A longitudinal skin incision is made at the level of the keel slot. A radial T‑plate is placed subcutaneously. The plate is fixed with a lag screw in the middle section. The compression usually closes the fracture gap. Then three locking cortical bone screws are inserted through the keel slot in the transverse section of the plate. Distal fixation by locking or standard screws.
POSTOPERATIVE MANAGEMENT
Immediate pain-adapted partial weight bearing, unrestricted mobility. Healing of the fracture and full weight bearing mostly achieved after 4 weeks.
Topics: Humans; Knee Prosthesis; Treatment Outcome; Fracture Fixation, Internal; Arthroplasty, Replacement, Knee; Tibial Fractures; Bone Plates
PubMed: 37857816
DOI: 10.1007/s00064-023-00829-3 -
Compendium of Continuing Education in... Oct 2023Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However,...
Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However, restorative techniques employing adhesive dentistry may provide viable alternatives to or complement SCL in select cases without the repercussions of surgical bone removal and open interproximal spaces. One such clinical technique, deep margin elevation (DME), employs a direct restoration to relocate the cervical margin of small subgingival defects of posterior teeth supragingivally. The "elevated" margin simplifies impression-making and bonding of indirect restorations, especially inlays and onlays. Recent scientific systematic literature reviews indicate favorable clinical outcomes and suggest that DME restorations made with scrupulous care have high success rates and are compatible with periodontal health. Optimal working field isolation, meticulous placement of matrices, proper bonding and buildup procedure, as well as regular maintenance and follow-up are essential for success. This article provides an overview of this approach.
Topics: Dental Restoration, Permanent; Crown Lengthening; Dental Cements; Inlays; Crowns
PubMed: 37850958
DOI: No ID Found -
The International Journal of... Oct 2023The aim of the current study is to evaluate inlay and onlay marginal adaptation of two different ceramic materials using two intra-coronal preparation designs.
PURPOSE
The aim of the current study is to evaluate inlay and onlay marginal adaptation of two different ceramic materials using two intra-coronal preparation designs.
MATERIALS AND METHODS
An examination of the marginal adaption of two materials, lithium disilicate (IPS e.max CAD) (EX) and polymer infiltrated ceramic network material (PICN; Vita Enamic) (EN), and two preparation designs where D1 represents MOD inlay preparation with no cusp reduction and D2 in addition of the basic MOD preparation, the buccal cusps (functional cusps) were reduced by 1.5 mm. 4 sub-groups (EX-D1), (EX-D2), (EN-D1), (EN-D2) were conducted. Forty (n=40) mandibular molars were used. A stereomicroscope was used to assess the marginal gap before, after cementation and after thermocycling. Values were calculated for the mean, median, standard deviation (Sd), minimum, maximum, and 95% confidence interval. Pair-wise comparisons using Tukey's Post-Hoc test were performed following a significant analysis of variance (ANOVA) P ≤ 0.05.
RESULTS
The results revealed that lithium disilicate (IPS e.max CAD) showed statistically significantly higher mean gap distance than polymer infiltrated ceramic network material (PICN; Vita Enamic) (61μm to 99μm). Pair-wise comparisons showed that D2 design has statistically significant higher mean gap values than D1.
CONCLUSIONS
Both lithium disilicate (IPS e.max CAD) or polymer infiltrated ceramic network material (PICN; Vita Enamic) provided marginal adaptation within clinical accepted range. Polymer infiltrated ceramic network material restorations provided better fit than lithium disilicate restorations. Cusp coverage has a greater marginal gap compared to conventional Preparation.
PubMed: 37824114
DOI: 10.11607/ijp.8504 -
Dental Materials : Official Publication... Dec 2023To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations...
OBJECTIVE
To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations and risk factors associated with restoration deficiencies and failures.
METHODS
Patients (n = 91) receiving LidiSi (73.1%) and RBC (36.9%) inlays/onlays/overlays between 2007 and 2017 were selected. The restorations were evaluated using the modified U.S. Public Health Service criteria. The survival of the restorations was analyzed using the Kaplan-Meier method and log rank test. Factors affecting the occurrence of deficiencies were examined by logistic regression analysis. This was performed with the use of the Generalized Estimating Equation model including Repeated measurements (GEER), with the consideration that the same patient had several teeth in the sample. Risk estimation was conducted for each evaluated criterion (p < 0.05).
RESULTS
The survival of LidiSi and RBC restorations were 96.8% and 84.9%, respectively after a mean observation period of 7.8 ± 3.3 years. The annual failure rate was 0.2% for LidiSi and 1.0% for RBC. The probability of survival was above 98% for both restorations in the first 6 years, however, it dropped to 60% for RBC by the end of the 15th year. For both materials the reasons for failure included secondary caries, restoration fracture, and endodontic complication. In addition, LidiSi also failed due to tooth fracture, while RBC due to marginal gap formation and loss of retention. Among the evaluated risk factors, material of restoration (OR=6.8, CI:3.1-14.9), oral hygiene (OR=8.0, CI: 2.9-22.1], and bruxism (OR=1.9, CI: 1.1-3.3) showed a significant impact on the evaluated criteria.
SIGNIFICANCE
LidiSi and RBC restorations showed similarly excellent 6-year survival, however, in the long term significantly more failures should be expected for RBCs.
Topics: Humans; Retrospective Studies; Dental Restoration Failure; Dental Porcelain; Composite Resins; Dental Materials; Ceramics; Inlays
PubMed: 37821330
DOI: 10.1016/j.dental.2023.10.017 -
The International Journal of Esthetic... Oct 2023Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on...
Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part II - full-contour resistive crowns with vertical preparation.
Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on when, how, and why to perform adhesive restorations (onlays, overlays, and endocrowns) or resistance form restorations (full-contour resistive crowns). In Part I of this three-part article series, the authors focused on adhesive partial restorations. In that article, the evidence was extensively described, and a clinically reasonable thought process was suggested for these decisions based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. Now, in Part II, the focus is on clinical decisions for full-contour resistive crowns regarding their indications based on remaining tooth structure, materials, and different preparation designs as well as the particularities of vertical marginal preparations, perio-restorative considerations, and esthetic challenges.
Topics: Humans; Crowns; Esthetics, Dental; Inlays
PubMed: 37819563
DOI: No ID Found -
Cureus Sep 2023A posterior tooth's occlusal surfaces and the proximal surface can be restored by using an inlay, which is an intra-crown cast reconstruction without affecting the cusps...
BACKGROUND
A posterior tooth's occlusal surfaces and the proximal surface can be restored by using an inlay, which is an intra-crown cast reconstruction without affecting the cusps of the tooth. When an inlay is prepared using an indirect approach, issues with traditional filling approaches, including poor morphology of the occlusal aspect or proximal aspect, inadequate resistance to wear, or subpar mechanical qualities of the directly inserted filler substance, are overcome.
AIM
The current study was conducted in order to compare and assess the resistance to fracture of dental materials used in the preparation of inlay restorations indirectly, like composite restorations prepared by laboratories indirectly, inlays formed indirectly of monolithic translucent ceramic derived from zirconia, and inlays formed indirectly of traditional monolithic ceramic derived from zirconia.
METHODS AND MATERIALS
For the investigation, 100 human premolars of the maxilla that were extracted recently were chosen. A self-polymerizing acrylic resin was used to incorporate the tooth roots in a band made up of polyvinyl chloride up to 2 mm below the cement-enamel junction. The dimension of the band was 1.3 cm by 1.9 cm. Five categories of 20 specimens of such teeth were formed. Category one, featuring teeth in good condition, acted as the positive control category. The remaining four categories of teeth received inlay tooth preparation. The research samples underwent thermocycling after having been preserved for a full week following the cementation of inlay replacements. Then, in a universal testing apparatus, every sample endured axial compressive force with a metal globe delivered vertically at a crosshead rate of 1 mm/minute. The amount of force necessary to cause a fracture was measured in Newtons (N).
RESULTS
The mean values of resistance against fracture in specimens in categories 1-5 were 1208.87 N, 614.89 N, 733.05 N, 1179.14 N, and 1148.49 N, respectively. The values of fracture resistance in specimens where an inlay cavity preparation was done but not filled were lower than those in traditional monolithic ceramic derived from zirconia and tooth specimens with inlays formed of monolithic translucent ceramic derived from zirconia, and the difference was significant statistically (p=0.001). The values of fracture resistance in composite inlay restorations prepared by laboratories were indirectly lower than those of monolithic ceramic derived from zirconia and tooth specimens with inlays formed of monolithic translucent ceramic derived from zirconia, and the difference was significant statistically (p=0.004).
CONCLUSION
Within the constraints of the current investigation, we can state that indirect zirconia-based ceramic products offer adequate fracture resistance, but additional research is needed to determine how well these materials hold up under different types of pressures before employing them in clinical tooth restoration.
PubMed: 37809271
DOI: 10.7759/cureus.44711 -
Hua Xi Kou Qiang Yi Xue Za Zhi = Huaxi... Oct 2023This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on...
OBJECTIVES
This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods.
METHODS
The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LD, LD, LD, LD, LU, LU, LU, and LU. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%.
RESULTS
LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement.
CONCLUSIONS
For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.
Topics: Inlays; Finite Element Analysis; Composite Resins; Bicuspid; Ceramics; Dental Stress Analysis
PubMed: 37805678
DOI: 10.7518/hxkq.2023.2023123