-
Annali Italiani Di Chirurgia 2024Chronic periodontitis leads to gingival swelling, hyperplasia, and tooth mobility, which affects orthodontic treatment. The aim of this study was to investigate the...
AIM
Chronic periodontitis leads to gingival swelling, hyperplasia, and tooth mobility, which affects orthodontic treatment. The aim of this study was to investigate the application of cefaclor in orthodontics through micro-implant anchorage in patients with periodontitis.
METHODS
A retrospective study was conducted on patients with periodontitis who received micro-implant anchorage treatment in the department of orthodontics at the First People's Hospital of Yongkang City from July 2019 to January 2022. According to different treatment regimens, these patients were divided into the test group (patients receiving cefaclor and micro-implant anchorage treatment) and the control group (patients receiving micro-implant anchorage treatment only). The plaque index (PLI), gingival index (GI), sulcus bleeding index (SBI), and serum inflammatory factor levels were compared between the two groups after treatment.
RESULTS
One hundred and five patients were included in the study, (44 males and 61 females, median age 21 [15-25] years), 51 in the cefaclor group and 54 in the no cefaclor group. After treatment, the PLI, GI, and SBI scores in the two groups were higher than those before treatment, and the levels of serum inflammatory markers significantly increased (p < 0.05). After treatment, the PLI, GI, and SBI scores in the test group were significantly lower than those in the control group (p < 0.001). The levels of serum interleukin-1β, interleukin-6, interleukin-8, and tumor necrosis factor-α were significantly lower in the test group, and the interleukin-2 level was higher in the test group (p < 0.001). There was no significant difference in the incidence of complications between the two groups (p > 0.05).
CONCLUSIONS
Cefaclor and micro-implant anchorage have a good clinical effect on orthodontics in patients with periodontitis, improving periodontal health and reducing inflammatory response.
Topics: Humans; Female; Male; Retrospective Studies; Adult; Cefaclor; Young Adult; Adolescent; Anti-Bacterial Agents; Orthodontic Anchorage Procedures; Periodontal Index; Chronic Periodontitis; Dental Implants
PubMed: 38918968
DOI: 10.62713/aic.3281 -
Journal of Medical Case Reports Jun 2024Free gingival graft is commonly used to augment the keratinized mucosa and vestibular depth around dental implants. The proper suturing technique is fundamental to...
BACKGROUND
Free gingival graft is commonly used to augment the keratinized mucosa and vestibular depth around dental implants. The proper suturing technique is fundamental to achieve a successful result following free gingival graft. However, there are limited studies that focus on the details of the suturing methods to optimize graft adaptation. The purpose of this technical note is to describe a new suturing technique for optimal approximation and stabilization of free gingival graft around dental implants.
CASE PRESENTATION
Here, we present a 53-year-old Persian female with peri-implantitis and lack of keratinized mucosa around mandibular implants who was a candidate for free gingival graft. A new suturing technique, double vertical interrupted suture, was conducted in the interimplant areas. In addition, the suspensory cross-mattress sutures were added to ensure the adaptation of the graft over the implants. The proposed suturing technique is useful for soft tissue augmentation around multiple implants with concave or uneven recipient bed.
CONCLUSION
The present article describes a novel suturing technique for good adaptation and fixation of free gingival graft around dental implants.
Topics: Humans; Female; Middle Aged; Gingiva; Suture Techniques; Dental Implants; Peri-Implantitis; Mandible
PubMed: 38918876
DOI: 10.1186/s13256-024-04611-2 -
BMC Oral Health Jun 2024One of the most important factors that has influence on dental implants success rate is marginal bone loss. The purpose of this study is to investigate the effect of the... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVES
One of the most important factors that has influence on dental implants success rate is marginal bone loss. The purpose of this study is to investigate the effect of the implant's vertical position and the soft tissue's thickness on the rate of marginal bone loss of the dental implant.
MATERIALS AND METHODS
In this single-blind randomized clinical trial study, 56 implants placed in the posterior region of mandible of 33 patients (19 women, 14 men) were divided into two groups. The group of crestal (28 implants) and subcrestal (28 implants) implants, each group was divided into two sub-groups with soft tissue thickness of 2 mm and less than 2 mm (14 implants) and more than 2 mm (14 implants). The amount of marginal bone loss was measured by Scanora 5.2 program with radiographs Digital parallelism based on the effect of the vertical position of the implant, soft tissue thickness, three months after placement, and three months after loading implants (six months after implant placement).
RESULTS
The results showed that marginal bone loss in subcrestal implants is significantly more than crestal implants (p-value = 0.001), and also marginal bone loss in the soft tissue thickness group of 2 mm and less is significantly more than the group of soft tissue thickness more than 2 mm (p-value < 0.001). The amount of marginal bone loss three months after implant loading was significantly higher than three months after implant placement (p-value < 0.001).
CONCLUSION
The implant's vertical position and the soft tissue's thickness around the implant are effective factors in the amount of marginal bone loss. Marginal bone loss is more in subcrestal implants and in cases with less soft tissue thickness. The time factor significantly affects the amount of marginal bone loss.
TRIAL REGISTRATION
this clinical trial was registered at Iranian Registry of Clinical Trials, registration number IRCT20120215009014N415, registration date 20,220,110, (https//en.irct.ir/trial/60,991).
Topics: Humans; Alveolar Bone Loss; Female; Male; Single-Blind Method; Dental Implants; Adult; Mandible; Middle Aged; Dental Implantation, Endosseous
PubMed: 38915016
DOI: 10.1186/s12903-024-04480-7 -
BMJ Case Reports Jun 2024Conventional operative dental procedures are being revisited with an approach that seeks to preserve the original tissue as much as possible. Implant dentistry has also...
Conventional operative dental procedures are being revisited with an approach that seeks to preserve the original tissue as much as possible. Implant dentistry has also seen the advent of various techniques which make minimal alteration to natural tissue. The flapless technique involves implant placement either through a freshly extracted socket or through a tansmucosal punch hole, without elevating mucoperiosteal flap. This paper presents a report on three cases of patient centric, conventional dental implant-based full-mouth rehabilitation, which was successfully carried out using the flapless technique, under varied clinical situations. Each case showed a favourable outcome in terms of restoration of the form and function of the patient's dentition.
Topics: Humans; Female; Male; Minimally Invasive Surgical Procedures; Mouth Rehabilitation; Dental Implantation, Endosseous; Middle Aged; Dental Implants; Adult
PubMed: 38914524
DOI: 10.1136/bcr-2024-259781 -
Photodiagnosis and Photodynamic Therapy Jun 2024This study aimed to assess the effectiveness of photobiomodulation therapy (PBM) in enhancing bone integration with dental implants. (Review)
Review
AIM
This study aimed to assess the effectiveness of photobiomodulation therapy (PBM) in enhancing bone integration with dental implants.
METHOD
PubMed, ScienceDirect, the Cochrane Library, Scopus, and Google Scholar were searched. Studies assessing PBM effectiveness with defined intervention/control groups were included, while those lacking specified laser types, involving severe maxillofacial defects or surgery, and not reporting outcomes related to dental implant osseointegration post-PBM therapy were excluded. The studies' risk of bias was assessed using Robvis for randomized controlled trials (RCTs) and ROBINS-I for non-RCTs. The meta-analysis was conducted utilizing a random-effects model at a significance level of 0.01.
RESULTS
The study reviewed 26 papers involving 571 patients undergoing dental implant procedures with PBM/Low-Level Laser Therapy (LLLT) or placebo/control. Implant stability quotients (ISQ) analysis showed a non-significant difference (p=0.06, mean difference: 1.02, 95% CI: 0.28 to 1.75, I=28%), while the Periotest method indicated significant improvement in stability (p<0.01, mean difference: -0.51, 95% CI: -0.78 to -0.24, I=71%). PBM resulted in a significant bone density increase (p<0.01, mean difference: 26, 95% CI: 6.93 to 45.06, I=91%), but marginal bone loss showed no significant difference (p=0.11, mean difference: 0.00, 95% CI: -0.06 to 0.05, I=45%). Implant survival rate did not significantly differ (p=0.73, mean difference: 1.56, 95% CI: 0.38 to 6.46, I=0%). Most studies raised concerns regarding randomization.
CONCLUSION
PBM could improve implant stability, as assessed with Periotest, and increase bone density, enhancing osseointegration. However, implant stability assessed with ISQ, marginal bone loss, and implant survival rate were comparable between the study groups.
PubMed: 38914185
DOI: 10.1016/j.pdpdt.2024.104256 -
F1000Research 2023Pediatric dental treatment is challenging in patients with early childhood caries. For clinician its difficult to manage child and provide good work at the same time.... (Comparative Study)
Comparative Study
BACKGROUND
Pediatric dental treatment is challenging in patients with early childhood caries. For clinician its difficult to manage child and provide good work at the same time. Its necessity to have the best equipments as well as materials. Nowadays, aesthetics play an important role in managing decayed teeth. Zirconia crown is better option but requires excessive preparation. As Bioflx is newly developed crown and has combined stainless steel and zirconia properties.
AIM
To assess the clinical performance and child and parental satisfaction of Bioflex crowns compared to zirconia and stainless steel crowns.
METHODS
In this comparative study of Bioflx crowns with zirconia and stainless steel crowns, children aged three to seven years old will be selected, and 72 primary teeth requiring crowns will be randomly distributed into three groups, n = 24: Preformed stainless steel crown, control; Preformed Bioflex crown; Preformed zirconia crown. Crowns will be evaluated for recurrent caries, plaque accumulation, restoration failure, gingival status opposing tooth wear, and clinicians and parental satisfaction at zero, three, six, and 12 months.
RESULTS
Bioflx crown will have better clinical as well as parental satisfaction among zirconia and stainless steel crowns.
CONCLUSIONS
The Bioflx crown can be used as an alternative economical esthetic full-coronal restoration for primary teeth.
TRIAL REGISTRATION
CTRI registration number: CTRI/2023/05/052256; Date of registration: May 03, 2023.
PROTOCOL VERSION
Two; Date: April 22, 2023.
Topics: Humans; Zirconium; Stainless Steel; Crowns; Child; Child, Preschool; Parents; Dental Caries; Patient Satisfaction; Male; Female
PubMed: 38911945
DOI: 10.12688/f1000research.133464.2 -
Journal of Maxillofacial and Oral... Jun 2024Dental implants are considered to be one of several treatment options that can be used to replace missing teeth. The objective of the study is to examine and compare the...
BACKGROUND AND PURPOSE
Dental implants are considered to be one of several treatment options that can be used to replace missing teeth. The objective of the study is to examine and compare the biomechanics of zygomatic and pterygoid implants planned on the atrophic maxilla with three different bone types.
MATERIALS AND METHODS
An in vitro finite element study was conducted on a three-dimensional model of zygomatic and pterygoid implants. In a total of 24 implants, two bilateral zygomatic and pterygoid implants with two anterior dental implants were inserted in models. 150 N vertical occlusal and 300 N load on masseter and medial pterygoid were simulated on the modeled prosthesis. The data were processed with ANSYS software. The stress on and deformations of the bones and implants were observed and compared.
RESULTS
When comparing the D4, D3, and D2 bones in subgroup I with zygomatic implants, the D2 bone was subjected to less stress compared to D3 and D4. The smallest displacement (0.125784 mm) was seen in D4 followed by the largest displacement (0.74073 mm) in D2. Similarly, when comparing the D2, D3, and D4 bone in subgroup II with pterygoid implants, the D2 bone in the atrophic maxilla received the least amount of stress from the pterygoid implants compared to D3 and D4. Furthermore, the smallest displacement (0.030934 mm) was seen in D2, and the largest (0.046319 mm) in D4.
CONCLUSION
Results suggest firstly, that the overall stress was better distributed in D2 bone and secondly, the pterygoid implant showed higher stress concentration than the zygomatic implant.
PubMed: 38911426
DOI: 10.1007/s12663-024-02128-1 -
Cureus May 2024Effective treatment planning is crucial for implant-supported dental prostheses' success, requiring a thorough assessment of various factors, including bone quality,...
Effective treatment planning is crucial for implant-supported dental prostheses' success, requiring a thorough assessment of various factors, including bone quality, quantity, and available space. Evaluating space availability, encompassing height, width, and angulation, is imperative to ensure optimal implant positioning devoid of anatomical limitations. Adequate vertical space is essential for accommodating the implant-supported restoration while preserving proper occlusal function and esthetics. However, not all cases adhere to ideal standards, especially those featuring limited interocclusal space, as seen in scenarios of long-standing edentulous areas lacking prior prosthetic rehabilitation. Ideally, the interocclusal space should measure between 8-12 mm vertically. This case report details the management of reduced interocclusal space through the strategic placement of deeply positioned implants and the incorporation of a screw-retained fixed partial denture, effectively addressing the challenges associated with limited space.
PubMed: 38910621
DOI: 10.7759/cureus.60886 -
F1000Research 2024This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite...
BACKGROUND
This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite based restorative material. Assessing different surface treatments provide insights in optimizing repair procedure that enables durability of the restoration, thus potentially benefitting clinical outcomes.
METHODS
A total of 48 alkasite based restorative material blocks, measuring 4 mm in depth and 4 mm in diameter, were prepared. The samples were randomly divided into 8 groups (n = 6) according to the surface treatment done. Group I: Surface preparation by bur; Group II: Surface treatment by laser; Group III: Application of 2-step etch and rinse adhesive (Adper Single Bond 2 adhesive),Group IV: Application of single step self-etch adhesive (Scotchbond Universal adhesive); Group V: Bur preparation followed by application of 2-step etch and rinse adhesive; Group VI: Bur preparation followed by application of single step self-etch adhesive; Group VII: Laser preparation followed by application of 2-step etch and rinse adhesive; and Group VIII: Laser preparation followed by application of single step self-etch adhesive. Post-surface preparation, all the specimens were restored with newly mixed alkasite material. Repair bond strength measurements were assessed with universal testing machine. Shapiro-Wilk and Levene's tests were used to check normality and Homogeneity of variance. ANOVA with post-hoc Games-Howell test and two-way ANOVA with post-hoc Bonferroni test was performed to evaluate the influence of surface preparation on the repair bond strength.
RESULTS
Using a 2-step etch and rinse adhesive resulted in a higher repair bond strength (26.05±2.12) compared to other surface treatments. In contrast, roughening of the surface with burs led to lowest repair bond strength (17.06±3.29) (P=0.02).
CONCLUSION
Application of 2-step etch and rinse adhesive to the existing alkasite based restorative material provides superior bonding with the newly added alkasite based restorative material.
Topics: Surface Properties; Dental Bonding; Shear Strength; Dental Materials; Materials Testing; Humans; Dental Restoration, Permanent
PubMed: 38910590
DOI: 10.12688/f1000research.148326.2 -
Lasers in Medical Science Jun 2024The review critically evaluates the current state of studies investigating laser irradiation for modifying titanium surfaces to enhance the biointegration of dental... (Review)
Review
The review critically evaluates the current state of studies investigating laser irradiation for modifying titanium surfaces to enhance the biointegration of dental implants. Laser modification is a rapidly evolving physicochemical surface modification process with the potential to revolutionize dental implant technology. A thorough search of electronic databases, including PubMed, Science Direct, MEDLINE, and Web of Knowledge, was conducted to identify relevant articles. The review focuses on the surface features of laser-modified implants, encompassing in vitro cell culture experiments, rare animal experiments, and limited clinical trials. Of the 26 selected sources, 21 describe surface features, while only two involve in vivo human experiments. The review highlights the lack of long-term clinical experience and calls for further research to mature these technologies. Despite the absence of a consensus on optimal laser types and settings, the overall results are promising, with few negative outcomes. As research in laser irradiation of titanium surfaces progresses, significant advancements in dental implant technology and improved patient well-being are anticipated.
Topics: Titanium; Dental Implants; Humans; Surface Properties; Lasers; Animals; Osseointegration
PubMed: 38910231
DOI: 10.1007/s10103-024-04076-1