-
Deutsches Arzteblatt International Aug 2024Partial or total avoidance of weight-bearing by a lower limb is regularly needed after trauma and surgery. There are approximately 200 such cases per 100 000 persons per... (Randomized Controlled Trial)
Randomized Controlled Trial
BACKGROUND
Partial or total avoidance of weight-bearing by a lower limb is regularly needed after trauma and surgery. There are approximately 200 such cases per 100 000 persons per year. Underarm crutches have mainly been used in Germany until now to keep these patients mobile. For those who lack the strength or coordination needed to use crutches, a wheelchair may become necessary, or they might find themselves forced to continue weight-bearing on the affected limb, with possible impending adverse consequences and complications.
METHODS
The supplementary use of a new type of orthopedic scooter by patients who must avoid weight-bearing by a lower limb, wholly or in part, was studied in a multicenter randomized controlled trial involving 88 subjects. The endpoints were improvement in quality of life (EQ5D, SF36) and improved abilities in everyday life (retrospective registration: DRKS00032980).
RESULTS
Patients who used orthopedic knee scooters (KS) reported a better overall state of health more frequently than those who used underarm crutches (UC) (SF-36 score: 67 [KS group], 95% CI [61; 73]; 59 [UC group], [53; 64]). They also reported less anxiety and depressed mood, greater mobility, and more independence than the patients who used crutches. In addition, they more frequently reported being able to transport themselves 4 x 500 meters in less than 20 minutes (n = 30 [KS], 63.8% [48.5; 77.3]; n = 6 [UC], 14.6% [5.6, 29.2]).
CONCLUSION
The supplementary use of an orthopedic knee scooter can improve these patients' mobility and independence and prolong the distance over which they can transport themselves. For many patients, this form of treatment may well shorten the time of their total or partial inability to work and thus lower the socioeconomic costs of lower limb injuries and surgery.
PubMed: 38932517
DOI: 10.3238/arztebl.m2024.0121 -
Sensors (Basel, Switzerland) Jun 2024Borehole strain gauges play a crucial role in geophysical, seismological, and crustal dynamics studies. While existing borehole strain gauges are proficient in measuring...
Borehole strain gauges play a crucial role in geophysical, seismological, and crustal dynamics studies. While existing borehole strain gauges are proficient in measuring horizontal strains within vertical boreholes, their effectiveness in capturing vertical and oblique strains is limited due to technical constraints arising from the cylindrical probe's characteristics. However, the accurate measurement of three-dimensional strain is essential for a comprehensive understanding of crustal tectonics, dynamics, and geophysics, particularly considering the diverse geological structures and force sources within the crustal medium. In this study, we present a novel approach to address this challenge by enhancing an existing horizontal-component borehole strain gauge with a bellows structure and line strain measurement technology to enable vertical and borehole oblique strain measurements. Integrating these enhancements with horizontal strain measurement capabilities enables comprehensive three-dimensional borehole strain measurements within the same hole section. The system was deployed and tested at the Gongxian seismic station in Sichuan Province. Clear observations of solid tides were recorded across horizontal, oblique, and vertical measurement units, with the tidal morphology and amplitude being consistent with the theoretical calculations. The achieved measurement sensitivity of 10-10 meets the requirements for borehole strain measurement, enabling the characterization of three-dimensional strain states within boreholes through association methods.
PubMed: 38931738
DOI: 10.3390/s24123954 -
Sensors (Basel, Switzerland) Jun 2024This study introduces a flexible and low-cost solution for a source measure unit (SMU), which is presented as an alternative to conventional source meter units and a...
This study introduces a flexible and low-cost solution for a source measure unit (SMU), which is presented as an alternative to conventional source meter units and a blueprint for sensor FET drivers. An SMU collects current-voltage (I-V) curves with an additional variable voltage or current and is commonly used to characterize semiconductors. We present the hardware design, interfacing, and test results of our SMU. Specifically, we present representative I-V curve measurements for graphene-channel FETs to demonstrate the SMU's capability to efficiently characterize these devices with minimal noise and sufficient accuracy. This cost-effective solution presents a promising avenue for researchers and developers seeking reliable tools for sensor development and characterization. We demonstrate, with the example of surface illumination, how the sensing behavior of graphene-channel FETs can be characterized without the need for expensive equipment. Additionally, the SMU was validated with known passive and active components, along with probe station integration for semiconductor die-scale connection. The SMU's focus on collecting I-V curves, coupled with its ability to identify device defects, such as parasitic Schottky junctions or a failed oxide, contributes to its utility in quality testing for semiconductor devices. Its low-cost nature makes it accessible for various research endeavors, enabling efficient data collection and analysis for graphene-based and other nanomaterial-based sensor applications.
PubMed: 38931626
DOI: 10.3390/s24123841 -
Sensors (Basel, Switzerland) Jun 2024Existing galvanometer-based laser-scanning systems are challenging to apply in multi-scale 3D reconstruction because of the difficulty in achieving a balance between a...
Existing galvanometer-based laser-scanning systems are challenging to apply in multi-scale 3D reconstruction because of the difficulty in achieving a balance between a high reconstruction accuracy and a wide reconstruction range. This paper presents a novel method that synchronizes laser scanning by switching the field-of-view (FOV) of a camera using multi-galvanometers. Beyond the advanced hardware setup, we establish a comprehensive geometric model of the system by modeling dynamic camera, dynamic laser, and their combined interaction. Furthermore, since existing calibration methods mainly focus on either dynamic lasers or dynamic cameras and have certain limitations, we propose a novel high-precision and flexible calibration method by constructing an error model and minimizing the objective function. The performance of the proposed method was evaluated by scanning standard components. The results show that the proposed 3D reconstruction system achieves an accuracy of 0.3 mm when the measurement range is extended to 1100 mm × 1300 mm × 650 mm. This demonstrates that for meter-scale reconstruction ranges, a sub-millimeter measurement accuracy is achieved, indicating that the proposed method realizes multi-scale 3D reconstruction and simultaneously allows for high-precision and wide-range 3D reconstruction in industrial applications.
PubMed: 38931577
DOI: 10.3390/s24123793 -
Sensors (Basel, Switzerland) Jun 2024Salivary pH is one of the crucial biomarkers used for non-invasive diagnosis of intraoral diseases, as well as general health conditions. However, standard pH sensors...
Salivary pH is one of the crucial biomarkers used for non-invasive diagnosis of intraoral diseases, as well as general health conditions. However, standard pH sensors are usually too bulky, expensive, and impractical for routine use outside laboratory settings. Herein, a miniature hydrogel sensor, which enables quick and simple colorimetric detection of pH level, is shown. The sensor structure was manufactured from non-toxic hydrogel ink and patterned in the form of a matrix with 5 mm × 5 mm × 1 mm individual sensing pads using a 3D printing technique (bioplotting). The authors' ink composition, which contains sodium alginate, polyvinylpyrrolidone, and bromothymol blue indicator, enables repeatable and stable color response to different pH levels. The developed analysis software with an easy-to-use graphical user interface extracts the R(ed), G(reen), and B(lue) components of the color image of the hydrogel pads, and evaluates the pH value in a second. A calibration curve used for the analysis was obtained in a pH range of 3.5 to 9.0 using a laboratory pH meter as a reference. Validation of the sensor was performed on samples of artificial saliva for medical use and its mixtures with beverages of different pH values (lemon juice, coffee, black and green tea, bottled and tap water), and correct responses to acidic and alkaline solutions were observed. The matrix of square sensing pads used in this study provided multiple parallel responses for parametric tests, but the applied 3D printing method and ink composition enable easy adjustment of the shape of the sensing layer to other desired patterns and sizes. Additional mechanical tests of the hydrogel layers confirmed the relatively high quality and durability of the sensor structure. The solution presented here, comprising 3D printed hydrogel sensor pads, simple colorimetric detection, and graphical software for signal processing, opens the way to development of miniature and biocompatible diagnostic devices in the form of flexible, wearable, or intraoral sensors for prospective application in personalized medicine and point-of-care diagnosis.
Topics: Colorimetry; Printing, Three-Dimensional; Hydrogen-Ion Concentration; Saliva; Hydrogels; Humans; Biosensing Techniques
PubMed: 38931525
DOI: 10.3390/s24123740 -
Sensors (Basel, Switzerland) Jun 2024Within research on the cross-view geolocation of UAVs, differences in image sources and interference from similar scenes pose huge challenges. Inspired by multimodal...
Within research on the cross-view geolocation of UAVs, differences in image sources and interference from similar scenes pose huge challenges. Inspired by multimodal machine learning, in this paper, we design a single-stream pyramid transformer network (SSPT). The backbone of the model uses the self-attention mechanism to enrich its own internal features in the early stage and uses the cross-attention mechanism in the later stage to refine and interact with different features to eliminate irrelevant interference. In addition, in the post-processing part of the model, a header module is designed for upsampling to generate heat maps, and a Gaussian weight window is designed to assign label weights to make the model converge better. Together, these methods improve the positioning accuracy of UAV images in satellite images. Finally, we also use style transfer technology to simulate various environmental changes in order to expand the experimental data, further proving the environmental adaptability and robustness of the method. The final experimental results show that our method yields significant performance improvement: The relative distance score (RDS) of the SSPT-384 model on the benchmark UL14 dataset is significantly improved from 76.25% to 84.40%, while the meter-level accuracy (MA) of 3 m, 5 m, and 20 m is increased by 12%, 12%, and 10%, respectively. For the SSPT-256 model, the RDS has been increased to 82.21%, and the meter-level accuracy (MA) of 3 m, 5 m, and 20 m has increased by 5%, 5%, and 7%, respectively. It still shows strong robustness on the extended thermal infrared (TIR), nighttime, and rainy day datasets.
PubMed: 38931506
DOI: 10.3390/s24123719 -
Microorganisms May 2024Nowadays, European seabass () aquaculture is undergoing a significant expansion. Nevertheless, the aquaculture industry is plagued by vibriosis. The spatial and temporal...
Nowadays, European seabass () aquaculture is undergoing a significant expansion. Nevertheless, the aquaculture industry is plagued by vibriosis. The spatial and temporal dynamics of were studied on a European seabass farm in northern France during seven months of 2022. Concrete specimens were suspended and water was pumped from different depths (0.3 m, 2.15 m and 4 m deep), providing insights into the biofilm and planktonic dynamics. The abundances of , in the biofilm and free-living forms, were positively correlated. The water parameters revealed seasonal fluctuations in temperature, pH, and salinity, with no significant differences observed across the water column. Quantification of revealed no significant differences between depths, but seasonality, with peak abundances observed in August, correlated with temperature increases. Principal component analysis identified temperature as a primary driver, but also additional parameters, such as salinity and pH. Vibriosis occurred during the sampling period, providing valuable insights into the conditions before, during, and after the outbreaks. This study underscores the importance of understanding behaviour in aquaculture, particularly in the context of global warming, for effective disease management and sustainable practices.
PubMed: 38930486
DOI: 10.3390/microorganisms12061104 -
Materials (Basel, Switzerland) Jun 2024As a renewable, environmentally friendly, natural, and organic material, wood has been receiving extensive attention from various industries. However, the hydrophilicity...
As a renewable, environmentally friendly, natural, and organic material, wood has been receiving extensive attention from various industries. However, the hydrophilicity of wood significantly impacts the stability and durability of its products, which can be effectively addressed by constructing superhydrophobic coatings on the surface of wood. In this study, tung oil, carnauba wax, and silica nanoparticles were used to construct superhydrophobic coatings on hydrophilic wood surfaces by a facile two-step dip-coating method. The surface wettability and morphology of the coatings were analyzed by a contact angle meter and scanning electron microscope, respectively. The results suggest that the coating has a micron-nanosized two-tiered structure, and the contact angle of the coating is higher than 150° and the roll-off angle is lower than 10°. Sandpaper abrasion tests and UV diffuse reflectance spectra indicate that the coatings have excellent abrasion resistance and good transparency. In addition, the coated wood shows excellent self-cleaning and water resistance, which have great potential for applications in industry and furniture manufacturing.
PubMed: 38930369
DOI: 10.3390/ma17123000 -
Materials (Basel, Switzerland) Jun 2024Fiber laser cutting machines are widely used in industry for cutting various sheet metals. Hardox steel is widely used in the construction of machinery and equipment...
Fiber laser cutting machines are widely used in industry for cutting various sheet metals. Hardox steel is widely used in the construction of machinery and equipment that are subjected to wear and impact due to its anti-wear properties and good impact resistance. In this experimental study, the effect of input parameters including laser output power (LOP), laser-cutting speed (LCS), and focal point position (FPP) of fiber laser on the surface roughness and kerf width of Hardox 400 steel sheets are studied. In addition, the optimization of input parameters to achieve the desired surface roughness and kerf width are investigated and analyzed using the response surface methodology (RSM). The experiments are performed using a 4 kW fiber laser-cutting machine and the output results including surface roughness and kerf width are measured using roughness meters and optical microscope. The results of the analysis of variance (ANOVA) for surface roughness and kerf width show that the FPP and LCS are the most significant process parameters affecting the surface roughness and kerf width. With a positive focal point, the surface roughness decreases while the kerf width increases. With increasing the laser-cutting speed, both the surface roughness and kerf width decrease.
PubMed: 38930168
DOI: 10.3390/ma17122798 -
Journal of Clinical Medicine Jun 2024: Gait speed indicates the individual's functional status and predicts overall health. This study aims to determine (1) the intra- and inter-rater and test-retest...
: Gait speed indicates the individual's functional status and predicts overall health. This study aims to determine (1) the intra- and inter-rater and test-retest reliability of the dynamic 4 m gait speed test protocol; (2) establish the normative reference values of habitual and fast gait speeds in community-dwelling healthy Singaporean adults aged 21 to 80; and (3) explore the association of age, gender, height, weight, and body mass index (BMI) on gait speed. : This prospective cross-sectional study recruited healthy ambulatory community-dwelling Singaporeans aged 21 to 80 who could ambulate independently without aid. Participants were excluded if they required walking aids; were pregnant; or had physical, medical, or cognitive conditions that may affect gait. Each participant completed at least two habitual and fast gait speed test trials via a 4 m walkway with a dynamic start. The data were analysed by descriptive statistics, the Mann-Whitney test, the Spearman coefficient, and the interclass correlation coefficient (ICC). : In total, 178 males and 201 females were included in the data analysis. The median age was 45.0 years [interquartile range (IQR) 26.2-59.0], and the median height was 1.64 metres (m) (IQR 1.58-1.70). The median habitual gait speed was 1.08 metre/second (m/s) (IQR 0.97-1.22), and the fast gait speed was 1.55 m/s (IQR 1.40-1.70). The ICC for reliability ranged from 0.84 to 0.99, indicating that the 4 m gait speed test had good-to-excellent reliability. : Gait speeds were not influenced by gender but declined with age advancement. Age and height and age and BMI were weakly correlated to habitual and fast gait speed, respectively. We established the norm values for the 4 m gait speeds in Singapore and proved it to be a reliable gait speed assessment ready for immediate community applications.
PubMed: 38930036
DOI: 10.3390/jcm13123507