-
International Journal of Computer... Apr 2024Many artifacts and obstacles associated with cone-beam computed tomography (CBCT) scan can obscure or distort the details of the teeth and occlusal surface, like...
PURPOSE
Many artifacts and obstacles associated with cone-beam computed tomography (CBCT) scan can obscure or distort the details of the teeth and occlusal surface, like distorted teeth, streak artifacts, noise, and some malocclusion cases with excessive overlapping between jaws cause decrease the interocclusal space, which can impact diagnosis and treatment planning, and the 3D reconstruction accuracy. Optimizing dental precision by Integrating CBCT scans with other imaging modalities, supply more information to enhance CBCT accuracy, mainly in dental areas with limited clarity.
METHODS
Performing the Structure-from-Motion (SfM) photogrammetry method, using phone camera and photograph studio setup using simple hardware, to digitize the dental casts and obtain an accurate digital dental model. Using this digital dental model to enhance dental precision in the CBCT data by performing the superimposition process, using a surface-based registration method and integration process to create a virtual dentoskeletal model. Evaluate the accuracy and quality of the superimposition results using qualitative (visual inspection) and quantitative measures.
RESULTS
The differences between the virtual dentoskeletal model and the reference CBCT model are calculating by the 3D Euclidean distance, the mean ± SD are 0.212 ± 0.169 mm and 0.26 ± 0.149 mm for the maxilla and mandible, respectively. The color-coded map shows that the two surfaces are similar, but the extremist values are concentrated in the dental region due to the presence of the noise in the reference model and the gingiva in the virtual dentoskeletal model.
CONCLUSIONS
The resulting virtual dentoskeletal model can be viewed and manipulated on a computer screen, allowing for a detailed analysis of the teeth and supporting structures. The 3D model generated by the SfM photogrammetry technique did well during the superimposition process, representing a reliable method for virtual-based processing such as orthognathic surgery planning and splint design.
PubMed: 38600410
DOI: 10.1007/s11548-024-03111-4 -
Hua Xi Kou Qiang Yi Xue Za Zhi = Huaxi... Apr 2024The aim of this study was to demonstrate a novel jaw position adjustment technique derived from digital twins and evaluate the application effect of digital...
OBJECTIVES
The aim of this study was to demonstrate a novel jaw position adjustment technique derived from digital twins and evaluate the application effect of digital technology-assisted optimization in the process of adjusting jaw position on patients with temporomandibular disorders (TMD).
METHODS
A total of 74 patients with TMD who attended the Department of Temporomandibular Joint, West China Hospital of Stomatology, Si-chuan University, between June 2022 and May 2023 were selected. The patient's initial computed tomography (CT) and bilateral temporomandibular joint data obtained by magnetic resonance imaging (MRI) were collected. The 148 joints were divided into the normal disc-condyle relationship (N) group, disc displacement with reduction (DDWR) group, and disc displacement without reduction (DDWoR) group. Assisted by digital technology, the patient's CT data were reconstructed, and a personalized reference plane was established to adjust the jaw position. A three-point bite guiding splint was designed by the adjusted occlusal space and then fabricated by 3D printing technology. It was worn by the patients and then reviewed by MRI. Before and after the adjustment of jaw position, the amount and direction of condyle and disc displacement and the angle between condyle and disc were measured as the evaluation indexes of the effect of the adjustment. The correlation with condylar displacement was evaluated.
RESULTS
In the N group, the disc moved backward and downward along the X and Z axes by (-0.60±0.62) and (0.51±0.71) mm, respectively. In the DDWR group, the disc moved backward and upward along the X and Z axes by (-1.33±1.38) and (-0.09±1.31) mm, respectively. In the DDWoR group, the disc moved forward and downward along the X and Z axes by (0.49±1.76) and (1.35±1.76) mm, respectively. The angle between the condyle and the disc decreased after adjustment of the jaw position in all three groups. All patients showed improvement in symptoms after adjustment.
CONCLUSIONS
Digital technology-assisted jaw position adjustment can simplify the process, reduce the sensitivity of the technique, and improve patients' disc-condyle structure and symptoms. Therefore, its application in the treatment of patients with TMD is of great clinical significance.
Topics: Humans; Temporomandibular Joint Disc; Mandibular Condyle; Digital Technology; Joint Dislocations; Temporomandibular Joint; Temporomandibular Joint Disorders; Magnetic Resonance Imaging
PubMed: 38597088
DOI: 10.7518/hxkq.2024.2023327 -
Journal of Pharmacy & Bioallied Sciences Feb 2024Temporomandibular joint disorders (TMDs) encompass a range of clinical conditions affecting the temporomandibular joint (TMJ) and associated structures. Management...
BACKGROUND
Temporomandibular joint disorders (TMDs) encompass a range of clinical conditions affecting the temporomandibular joint (TMJ) and associated structures. Management approaches for TMDs vary and include both surgical and non-surgical interventions.
MATERIALS AND METHODS
In this retrospective cohort study, medical records of 150 patients diagnosed with TMDs were reviewed. Patients were categorized into two groups: surgical intervention and non-surgical intervention. The surgical group underwent various surgical procedures, including arthroscopy, arthroplasty, and joint replacement, while the non-surgical group received conservative treatments such as physical therapy, pharmacotherapy, and occlusal splints. Pain levels, TMJ function, quality of life (QoL), and patient satisfaction were assessed at baseline and post-treatment (6 months and 1 year).
RESULTS
At the 6-month follow-up, both groups experienced a significant reduction in pain scores (surgical group: 6.3 ± 1.2 to 2.4 ± 0.9, non-surgical group: 6.1 ± 1.1 to 3.2 ± 1.0). TMJ function improved in both groups (surgical group: 2.5 ± 0.8 to 4.8 ± 0.6, non-surgical group: 2.6 ± 0.7 to 4.2 ± 0.9). QoL scores increased (surgical group: 35.2 ± 4.6 to 50.3 ± 5.1, non-surgical group: 35.5 ± 4.2 to 45.7 ± 4.8), and patient satisfaction rates were high (surgical group: 92%, non-surgical group: 87%) at the 1-year follow-up.
CONCLUSION
Both surgical and non-surgical management approaches demonstrated significant improvements in pain relief, TMJ function, QoL, and patient satisfaction for individuals with TMDs.
PubMed: 38595556
DOI: 10.4103/jpbs.jpbs_938_23 -
The Journal of Prosthetic Dentistry Jun 2024Additive (AM) and subtractive (SM) manufacturing have become popular for fabricating occlusal devices with materials of different chemical compositions. However,...
Effect of material and antagonist type on the wear of occlusal devices with different compositions fabricated by using conventional, additive, and subtractive manufacturing.
STATEMENT OF PROBLEM
Additive (AM) and subtractive (SM) manufacturing have become popular for fabricating occlusal devices with materials of different chemical compositions. However, knowledge on the effect of material and antagonist type on the wear characteristics of occlusal devices fabricated by using different methods is limited.
PURPOSE
The purpose of this in vitro study was to evaluate the effect of material and antagonist type on the wear of occlusal devices fabricated by using conventional manufacturing, AM, and SM.
MATERIAL AND METHODS
Two-hundred and forty Ø10×2-mm disk-shaped specimens were fabricated by using heat-polymerized polymethylmethacrylate (control, CM), AM clear device resin fabricated in 3 different orientations (horizontal [AMH], diagonal [AMD], and vertical [AMV]), SM polymethylmethacrylate (SMP), and SM ceramic-reinforced polyetheretherketone (SMB) (n=40). Specimens were then divided into 4 groups based on the antagonists: steatite ceramic (SC); multilayered zirconia (ZR); lithium disilicate (EX); and zirconia-reinforced lithium silicate (ZLS) used for thermomechanical aging (n=10). After aging, the volume loss (mm) and maximum wear depth (μm) were digitally evaluated. Data were analyzed with 2-way analysis of variance and Tukey honestly significant difference tests (α=.05).
RESULTS
The interaction between the device material and the antagonist affected volume loss and maximum depth of wear (P<.001). AMH had volume loss and depth of wear that was either similar to or higher than those of other materials (P≤.044). When SC was used, CM had higher volume loss and depth of wear than AMV, and, when EX was used, AMD had higher volume loss and depth of wear than SMP (P≤.013). SC and ZR led to higher volume loss of CM and AMH than EX and led to the highest depth of wear for these materials, while ZR also led to the highest volume loss and depth of wear of AMD and AMV (P≤.019). EX led to the lowest volume loss and depth of wear of AMV and SMP and to the lowest depth of wear of AMH (P≤.021). Regardless of the antagonist, SMB had the lowest volume loss and depth of wear (P≤.005).
CONCLUSIONS
AMH mostly had higher volume loss and depth of wear, while SMB had the lowest volume loss, and its depth of wear was not affected by the tested antagonists. ZR mostly led to higher volume loss and maximum depth of wear, while EX mostly led to lower volume loss and maximum depth of wear of the tested occlusal device materials.
Topics: Materials Testing; Dental Materials; Polymethyl Methacrylate; Zirconium; Ceramics; Humans; In Vitro Techniques; Occlusal Splints; Dental Restoration Wear; Dental Prosthesis Design; Benzophenones; Dental Porcelain; Polymers; Surface Properties; Polyethylene Glycols; Ketones
PubMed: 38594086
DOI: 10.1016/j.prosdent.2024.03.026 -
Journal of Personalized Medicine Mar 2024Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding,...
INTRODUCTION
Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding, others only positioning. This study aimed to assess the accuracy of a new MD (Pirifix) coupling these two functions during LFIO on 3D-printed models.
MATERIALS AND METHODS
DICOM data were selected from patients who underwent surgical planning for LFIO between 27 July 2020 and 1 December 2022. Their anatomy was reproduced after segmentation, planning, and stereolithography in two models. Each model was assigned to one of two surgical groups: the control group (positioning by occlusal splint) and the Pirifix group. Each patient's model was planned with the objective of horizontalizing and recentering the UDA. After positioning, models were digitalized using Einscan Pro 2X and compared to the planned model with CloudCompare. The statistical analysis was performed using the Wilcoxon Mann-Whitney test. The result was considered significant if the -value was less than 0.05.
RESULTS
Twenty-one patients were selected. Forty-two anatomical models were 3D-printed. The mean difference compared to the planned and corrected positions was 0.69 mm for the control group and 0.84 mm for the Pirifix group ( = 0.036).
CONCLUSION
Pirifix may be a new alternative to available MDs. Further investigations are needed to describe the relationship between the device and facial soft tissues.
PubMed: 38541066
DOI: 10.3390/jpm14030324 -
Diagnostics (Basel, Switzerland) Mar 2024Occlusal splints and anterior repositioning splints (ARSs) are widely accepted treatments for temporomandibular disorders (TMDs). However, there is uncertainty with...
BACKGROUND
Occlusal splints and anterior repositioning splints (ARSs) are widely accepted treatments for temporomandibular disorders (TMDs). However, there is uncertainty with regard to the most suitable amount of mandibular repositioning. The aim of this study is to evaluate the clinical and functional effects of the therapeutic position (ThP) established based on the Controlled Mandibular Repositioning (CMR) method.
METHODS
In this clinical trial, 20 subjects with 37 joints with disc displacement with reduction were recruited. The initial standard functional diagnostic protocol, MRI, and digital condylography were performed, and ThP was calculated with the CMR method. After a 6-month follow-up, the standard diagnostic protocol was repeated. The change in disc position was evaluated by means of MRI after 6 months of CMR therapy.
RESULTS
The MRI findings in the parasagittal plane demonstrated that out of the 37 joints presenting disc displacement, 36 discs were successfully repositioned; thus, the condyle-disc-fossa relationship was re-established. Therefore, the success rate of this pilot study was 97.3%. The mean position of the displaced discs was at 10:30 o'clock of the TMJ joint and at 12:00 o'clock after CMR therapy.
CONCLUSIONS
The ThP determined using the CMR approach reduced all of the anteriorly displaced discs (except one). The CMR method allowed to define an optimum ThP of the mandible thus supporting patients' effective adaptation to treatment position.
PubMed: 38534993
DOI: 10.3390/diagnostics14060572 -
Sleep Medicine May 2024Custom-made titratable mandibular advancement device (MAD) treatment can nowadays be considered a promising first-line treatment in patients with mild to severe...
INTRODUCTION
Custom-made titratable mandibular advancement device (MAD) treatment can nowadays be considered a promising first-line treatment in patients with mild to severe obstructive sleep apnea (OSA). Specific manufacturing designs and titration mechanisms of MAD are on the market, characterized by their titration approach, vertical opening, and materials selection. The wing-designed MAD (SomnoDent® Flex™, SomnoMed Ltd, Sydney, Australia) has a lateral screw mechanism to advance the lower jaw in incremental steps of 0.1 up to 6.0 mm. The newer uniquely designed custom-made MAD with passive mouth closing (SomnoDent® Avant™ SomnoMed Ltd, Sydney, Australia) has a frontal exchangeable advancement strap of fixed lengths as a specific titration mechanism, all supporting freedom of lateral movement. We aimed to assess the associations between the type of MAD prescribed and OSA treatment outcome.
METHODS
Data from 209 patients (165 male, mean age 53.9 (±10.9) years, median baseline BMI and AHI 27.02 [24.8; 29.7] kg/m and 22.8 [17.7; 31.6]/hour sleep, respectively) were collected. Of this cohort, 91 patients with the traditional, wing-based SomnoDent® Flex™ and 118 patients with SomnoDent® Avant™. All patients were diagnosed with a type 1 polysomnography demonstrating moderate to severe OSA (15 ≤ AHI ≤65 per hour sleep). The selected MAD was fitted in the so-called maximal comfortable protrusion. After 3 months of subjective titration until resolution of subjective symptoms and/or achieving physical limits, a checkup with validated home sleep monitoring was conducted. Treatment success was defined as "AHI reduction ≥50% with MAD compared to baseline AHI and AHI with MAD <10 events per hour".
RESULTS
These real-world data set showed that 67% of patients achieved treatment success, with a statistically significant reduction in AHI from 22.8 [17.7; 31.6] to 7.45 [3.4; 15.0]/h sleep. The SomnoDent® Avant™ achieved 75% treatment success versus 56% for the traditional, wing-based SomnoDent® Flex™ (P < 0.05). Overall, AHI reduction was 70% for SomnoDent® Avant™ (P < 0.05) vs. 63% for SomnoDent® Flex™ (P < 0.05).
CONCLUSIONS
This study shows that choice of MAD design can impact the treatment outcome and could become an important consideration in selecting the type of MAD for personalized treatment for OSA patients. While the results of the traditional wing-based MAD design were comparable to the therapeutic outcome with other titratable, custom-made MADs, the MAD with the passive mouth closing feature showed significantly greater reduction in total AHI potentially due to encouraged nasal breathing, reduced mouth breathing and lesser vertical opening thereby decreasing the probability of tongue base collapse.
Topics: Humans; Male; Middle Aged; Sleep Apnea, Obstructive; Occlusal Splints; Mandibular Advancement; Treatment Outcome; Sleep
PubMed: 38518588
DOI: 10.1016/j.sleep.2024.02.035 -
Brazilian Oral Research 2024Occlusal stabilization splints are the most common treatment for controlling the deleterious effects of sleep bruxism. This study aimed to evaluate the effectiveness of... (Randomized Controlled Trial)
Randomized Controlled Trial
Occlusal stabilization splints are the most common treatment for controlling the deleterious effects of sleep bruxism. This study aimed to evaluate the effectiveness of a low-cost, mixed occlusal splint (MOS) compared to that of a rigid splint. A randomized clinical trial was performed on 43 adults of both sexes with possible sleep bruxism and satisfactory dental conditions. They were divided into rigid occlusal splint (ROS) (n = 23) and MOS (n = 20) groups. Masticatory muscle and temporomandibular joint (TMJ) pain intensity (visual analog scale), quality of life (WHOQOL-BREF), indentations in the oral mucosa, anxiety, and depression (HADS), number of days of splint use, and splint wear were evaluated. All variables were evaluated at baseline (T0), 6 months (T6), and 12 months (T12) after splint installation (T0), and splint wear was evaluated at T6 and T12. Student's t-test, Mann-Whitney U test, non-parametric Friedman's analysis of variance for paired samples and pairwise multiple comparisons, Pearson's chi-square test, two-proportion z-test, non-parametric McNemar's and Cochran's Q, and Wilcoxon tests were used (p < 0.05). In both groups, there was a decrease in TMJ pain and pain intensity over time and improvements in the quality of life scores. At T6, there was a higher rate of splint wear in the MOS group than in the ROS group (p = 0.023). The MOS showed a higher rate of wear than the rigid splint but had similar results for the other variables. Therefore, the use of a mixed splint appears to be effective in controlling the signs and symptoms of sleep bruxism.
Topics: Adult; Female; Male; Humans; Occlusal Splints; Splints; Quality of Life; Reactive Oxygen Species; Sleep Bruxism
PubMed: 38477803
DOI: 10.1590/1807-3107bor-2024.vol38.0017 -
Journal of Oral Rehabilitation Jun 2024Longitudinal intervention studies on treatment options in temporomandibular dysfunction (TMD) including self reports and salivary biomarkers of stress are rare and the... (Randomized Controlled Trial)
Randomized Controlled Trial
BACKGROUND
Longitudinal intervention studies on treatment options in temporomandibular dysfunction (TMD) including self reports and salivary biomarkers of stress are rare and the exact therapeutic function of occlusal splints widely unknown.
METHODS
We examined the therapeutic effects of a Michigan splint with occlusal relevance in patients with TMD using a placebo-controlled, delayed-start design. Two intervention groups received a Michigan splint, while one of them had a placebo palatine splint for the first 3 weeks. We collected pain intensities (at rest and after five occlusal movements), salivary measures associated with stress (cortisol and alpha-amylase) and self-reported psychological distress (stress, anxiety, catastrophizing) at baseline and 3 and 7 weeks after onset of intervention.
RESULTS
At baseline, we observed increased pain intensity and psychological distress in TMD patients compared to 11 matched healthy controls. Baseline anxiety was linked to movement pain intensity through stress. Over therapy reductions in pain intensity and morning cortisol were more pronounced in those patients starting immediately with the Michigan splint, while psychological distress decreased similarly in both groups.
CONCLUSION
Our results suggest that perceived stress plays a role for the association between anxiety and TMD pain and underlines the need for an interdisciplinary perspective on the pathogenesis and therapy of TMD in a setting where psychotherapeutic knowledge is still scarce or rarely applied.
Topics: Humans; Female; Occlusal Splints; Temporomandibular Joint Disorders; Adult; Male; Saliva; Biomarkers; Stress, Psychological; Hydrocortisone; Pain Measurement; Treatment Outcome; Facial Pain; Middle Aged; Young Adult; alpha-Amylases
PubMed: 38475974
DOI: 10.1111/joor.13678 -
BMC Oral Health Mar 2024Overerupted maxillary molars is common in adults, which can lead to insufficient intermaxillary vertical space ,great difficulty in prosthetic reconstruction ,and cause...
BACKGROUND
Overerupted maxillary molars is common in adults, which can lead to insufficient intermaxillary vertical space ,great difficulty in prosthetic reconstruction ,and cause occlusal interference in movements.To reconstruct occlusal function, it is necessary to prepare enough space for prostheses. The aim of the present study was to evaluate the effect of space-adjustment occlusal splint on overerupted maxillary molars by clinical and electromyographic signals analysis.
METHODS
Eighteen patients with overerupted maxillary molars were selected to wear space-adjustment occlusal splint suppressing overerupted maxillary molars for three months. Satisfaction was assessed by 5-point Likert; intermaxillary vertical space and the teeth transportation distance were measured in models; clinical periodontal status were evaluated by periodontal probing depth (PPT) and bleeding index (BI); electromyographic recordings of the masseter and anterior temporal muscles were monitored by Cranio-Mandibular K7 Evaluation System.
RESULTS
All the patients were satisfied with the treatment effect (Likert scale ≧ 4). The intermaxillary space in edentulous areas after treatment showed statistically significant increasing when compared with those before treatment. PPT and BI showed no significant difference. No statistically significant differences were found in electromyographic activity of anterior temporal muscles, while a reduction of muscle activity in masseter in the contralateral side were detected in post-treatment evaluations compared with pre-treatment at mandibular rest position.
CONCLUSIONS
Space-adjustment occlusal splint is an efficient treatment option on overerupted maxillary molars by intruding the maxillary molar to obtain adequate intermaxillary space for prostheses.
Topics: Adult; Humans; Splints; Molar; Masseter Muscle; Temporal Muscle; Occlusal Splints; Electromyography
PubMed: 38431564
DOI: 10.1186/s12903-024-04039-6