-
The Journal of Clinical Pediatric... May 2024The purpose of this study was to quantitatively evaluate adhesive remnants on the enamel surface following bracket debonding using a freezing element. Thirty-six sound...
The purpose of this study was to quantitatively evaluate adhesive remnants on the enamel surface following bracket debonding using a freezing element. Thirty-six sound premolars were used in this study. In each case, a bracket was bonded onto each tooth with conventional light-cured composite resin and de-bonded after one week. Freezing of the underlying composite through the bracket was performed immediately before debonding with a portable cryosurgical system (-55 °C). Specimens were divided into three groups according to the duration of freezing: a control group without freezing was used as a reference and two interventional groups with different durations of freezing (15 or 40 s). Brackets were removed by using debonding pliers to squeeze the wings of the bracket in an occluso-gingival manner. Adhesive remnants on the tooth were then quantitatively evaluated by stereo-microscopy. Pearson's Chi-squared test was used to investigate the relationship between the proportion of remaining resin and the group of teeth. In the control group, 100% of the composite remained on the enamel surface of all specimens. Significantly less adhesive remnants were found in the intervention groups ( = 0.001 for the 15 s group and = 0.043 for the 40 s group). There was no significant difference between the two interventions ( = 0.165) in terms of the proportion of remaining adhesive remnants. Freezing of the bracket and the underlying adhesive resin prior to bracket debonding may favorably alter the behavioral pattern of composite fracture, thus reducing the extent of adhesive remnants on the enamel. Increasing the freezing time from 15 to 40 s did not exert significant effects on adhesive remnants following debonding. Further research now needs to investigate the effect of freezing on the mechanical properties of the adhesive remnants and its effect on pulp vitality over both short- and long-terms.
Topics: Humans; Dental Debonding; Freezing; Orthodontic Brackets; Composite Resins; Dental Enamel; In Vitro Techniques; Resin Cements; Dental Cements; Bicuspid; Materials Testing
PubMed: 38755979
DOI: 10.22514/jocpd.2024.056 -
Journal of Clinical Orthodontics : JCO Apr 2024
Topics: Orthodontic Brackets; Humans; Orthodontic Appliance Design; Orthodontic Wires
PubMed: 38754443
DOI: No ID Found -
Current Medical Science Jun 2024Maxillary protrusion combined with mandibular retraction is a highly prevalent but extremely complex maxillofacial deformity that can have a serious negative impact on...
Maxillary protrusion combined with mandibular retraction is a highly prevalent but extremely complex maxillofacial deformity that can have a serious negative impact on patients' facial aesthetics and mental health. The traditional orthodontic treatment strategy often involves extracting 4 first premolars and conventional fixed techniques, combined with mini-implant screws, to retract the anterior teeth and improve facial protrusion. In recent years, an invisible orthodontic technique, without brackets, has become increasingly popular. However, while an invisible aligner has been used in some cases with reasonable results, there remain significant challenges in achieving a perfect outcome. This case report presents an adolescent patient with bimaxillary protrusion and mandibular retrognathia. Based on the characteristics of the invisible aligners and the growth characteristics of the adolescent's teeth and jawbone, we designed precise three-dimensional tooth movement and corresponding resistance/over-correction for each tooth, while utilizing the patient's jawbone growth potential to promote rapid development of the mandible, accurately and efficiently correcting bimaxillary protrusion and skeletal mandibular retrognathia. The patient's facial aesthetics, especially the lateral morphology, have been greatly improved, and various aesthetic indicators have also shown significant changes, and to the patient's great benefit, invasive mini-implant screws were not used during the treatment. This case highlights the advantages of using invisible aligners in adolescent maxillary protrusion combined with mandibular retraction patients. Furthermore, comprehensive and accurate design combined with good application of growth potential can also enable invisible orthodontic technology to achieve perfect treatment effects in tooth extractions, providing clinical guidance for orthodontists.
Topics: Humans; Adolescent; Mandible; Female; Tooth Movement Techniques; Retrognathia; Maxilla; Male
PubMed: 38748367
DOI: 10.1007/s11596-024-2856-4 -
Journal of the World Federation of... May 2024Accurate bracket positioning remains challenging. To avoid angulation errors, some recommend examining the panoramic radiograph during bonding. However, it can cause...
INTRODUCTION
Accurate bracket positioning remains challenging. To avoid angulation errors, some recommend examining the panoramic radiograph during bonding. However, it can cause distortions. Cone-beam computed tomography (CBCT) provides a more precise panoramic reconstruction but with higher radiation doses. The main objective of this study is to compare the accuracy of axial positioning between direct bonding without radiography, with conventional panoramic radiograph, and with panoramic reconstruction from CBCT. The secondary objectives are to evaluate positioning accuracy of each tooth and to assess the influence of practitioner level of experience.
METHODS
Thirty practitioners, divided into two groups based on their experience performed direct bonding on a model thrice: without radiography, then with the conventional panoramic radiograph, then with the panoramic reconstruction from CBCT. Models were scanned, and angulation errors were measured using OrthoAnalyzer. Values were compared using the Friedman's test followed by the Bonferroni correction for multiple comparisons (P-value = 0.05).
RESULTS
For the low level of experience group, angulation errors were significantly greater than the accepted limit without radiographic reference, and significantly lower with CBCT reconstruction. For the high level of experience group, angulation errors were significantly lower than the accepted limit for the three bonding methods. For every tooth, using the panoramic reconstruction from CBCT as a reference, was the most accurate method, regardless of the level of experience. More experienced practitioners made fewer errors for the three methods.
CONCLUSIONS
Panoramic reconstruction from CBCT is the most accurate method to limit angulation errors during direct bonding. Conventional panoramic radiography remains a reliable tool if used with caution. Bonding without any radiographic reference should be avoided especially for less experienced practitioners.
PubMed: 38744656
DOI: 10.1016/j.ejwf.2024.03.007 -
International Dental Journal May 2024Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of...
INTRODUCTION
Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of failure and cracking of braces should be considered. Therefore, the aim of the present study was to compare the failure rates of ceramic and metal brackets in a 12-month clinical study.
METHODS
Eighty patients undergoing fixed orthodontic treatment with vestibular appliances were enrolled and divided into 2 equal groups: MET for metal brackets and CER for ceramic brackets. After bonding, bracket failures were recorded for 12 months, along with the archwire placed at the time of failure. Angle's dental class, skeletal class, Wits appraisal, Little's irregularity index, overjet, overbite, age, and gender of the patients were recorded from pretreatment cephalometric tracings and study casts. The data were statistically analysed (P < .05).
RESULTS
Significantly higher failure rates were found for ceramic brackets in the overall analysis, in the mandibular arch, and in the posterior region. Regression analysis revealed a significant influence of round nickel-titanium archwires on higher failure rates, whilst a significant influence of rectangular archwires was found on lower failure rates.
CONCLUSIONS
Ceramic brackets showed higher failure rates. Patients should be aware that orthodontic treatment with ceramic brackets may involve delays and inconvenience due to the higher failure rate compared to metal brackets.
PubMed: 38744578
DOI: 10.1016/j.identj.2024.04.023 -
Frontiers in Dentistry 2024The reduction of resistance to sliding between the archwire and bracket promotes more seamless tooth movement, leading to a faster and improved orthodontic treatment...
The reduction of resistance to sliding between the archwire and bracket promotes more seamless tooth movement, leading to a faster and improved orthodontic treatment experience. This research aimed to examine how the degradation of elastomeric modules, different ligation methods, bracket-wire angle, and wire type (nickel titanium, NiTi or stainless-steel, SS) impact the kinetic friction resulting from the interaction between NiTi or SS archwires and SS brackets. The current in vitro study was conducted on nine groups, including NiTi and SS archwires with three types of ligations (O-ring, figure of 8, and SS wire ligature) and two bracket-wire angles (0˚ and 10˚). The kinetic friction in each group was measured using a Universal Testing Machine at four time intervals: baseline, day one, week one, and week four. Repeated measures ANOVA, Mauchly test of sphericity followed by the Greenhouse-Geisser test, and relevant post hoc tests were used for statistical analysis (P<0.05). The authors found a decrease in kinetic friction in all types of ligations, which confirmed the effect of time on the degradation of ligation modules. The kinetic friction of figure of 8 ligations was higher than both O-ring and SS wire ligations. No difference was observed between O-ring and SS wire ligations. Furthermore, the bracket-wire angle did not affect friction. The authors suggest that the use of figure of 8 ligations in NiTi and SS wires should be limited due to their high friction and replaced with other types of ligations, if possible.
PubMed: 38742224
DOI: 10.18502/fid.v21i10.15222 -
BMC Oral Health May 2024This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and...
OBJECTIVE
This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and by comparing it with the half-wrapped tray (HWT).
MATERIALS AND METHODS
An intraoral scanner was used to acquire data on the maxillary dental arch of a patient with periodontitis.Furthermore, 20 maxillary dental arch models were 3D printed. Using 3Shape, PlastyCAD software, and 3D printing technology, 10 FTMC (method I) and HWT (method II) were obtained. By preoperative preparation, intraoperative coordination, and postoperative measurement, the brackets were transferred from the trays to the 3D-printed maxillary dental arch models. Additionally, the bracket's excess adhesive as well as linear and angular deviations were measured, and the differences between the two methods were analyzed.
RESULTS
Excess adhesive was observed in both methods, with FTMC showing less adhesive (P< 0.001), with a statistical difference. Furthermore, HWT's vertical, tip and torque, which was significantly greater than FTMC (P< 0.05), with no statistical difference among other respects. The study data of incisors, canines, and premolars, showed that the premolars had more adhesive residue and were more likely to have linear and angular deviations.
CONCLUSIONS
The FTMC had higher bracket bonding effect in comparison to HWT, and the adhesive residue, linear and angular deviations are smaller. The fence tray offers an intuitive view of the precise bonding of the bracket, and can remove excess adhesive to prevent white spot lesions via care, providing a different bonding method for clinical applications.
Topics: Orthodontic Brackets; Humans; Dental Bonding; In Vitro Techniques; Models, Dental; Adhesives; Printing, Three-Dimensional; Dental Cements; Dental Arch
PubMed: 38735948
DOI: 10.1186/s12903-024-04348-w -
Clinical Oral Investigations May 2024This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA)... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
AIMS
This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA) compared to fluoride varnish.
METHODS
Patients aged 12-17 years with at least one WSL with an International Caries Detection and Assessment System (ICDAS) score of 1-2 during an active MBA treatment were included and randomized to receive either resin infiltration (Icon) or fluoride application (Flairesse). Standardized digital images were obtained before, one-day, one-week, one-month, three-months and six-months after treatment using a DSLR camera and a matching polarization filter. A grey reference card was used for color standardization. A Matlab routine was used to measure the color difference between adjacent healthy enamel and treated WSL. The independent-samples t-test was used for intergroup and paired-samples t-test for intragroup comparison.
RESULTS
Images of 116 teeth from 36 patients were analyzed. The ΔE for the "Icon" treated WSL was smaller (T1 = 5.0 ± 1.4) than in the fluoride group (T1 = 8.4 ± 3.2). Caries infiltration significantly improved the aesthetic appearance of WSL (p < 0.001), which remained satisfactory at six months (T5 = 5.2 ± 1.6).
CONCLUSION
WSL infiltration management during orthodontic treatment was superior to topical fluoridation in not only arresting the enamel lesions but also significantly improving the aesthetic appearance of demineralized regions around the brackets.
CLINICAL RELEVANCE
WSL treatment in orthodontic patients is usually initiated after debonding. Research has shown that the earlier WSL is treated, the better the aesthetic outcome. There is limited data on the efficacy of resin infiltration of WSL during orthodontic treatment.
Topics: Adolescent; Child; Female; Humans; Male; Cariostatic Agents; Dental Caries; Fluorides, Topical; Orthodontic Brackets; Resins, Synthetic; Treatment Outcome
PubMed: 38733458
DOI: 10.1007/s00784-024-05695-2 -
Polymers May 2024Polyetheretherketone (PEEK), an organic thermoplastic polymer, has gained interest in dentistry due to its excellent mechanical strength, flexibility, and... (Review)
Review
Polyetheretherketone (PEEK), an organic thermoplastic polymer, has gained interest in dentistry due to its excellent mechanical strength, flexibility, and biocompatibility. Furthermore, the ability to utilize CAD/CAM in the fabrication of PEEK enhances accuracy, reliability, and efficiency while also saving time. Hence, several orthodontic studies have explored the utilization of PEEK in various applications, such as archwires, brackets, fixed lingual retainers, palatal expansion devices, transpalatal arches, Tübingen palatal plates, different types of space maintainers, mini-implant insertion guides, and more. However, a complete systematic review of the available data comparing the performance of PEEK with traditional orthodontic materials has not yet been conducted. Therefore, this systematic review seeks to assess if PEEK material meets the required mechanical criteria to serve as an alternative to conventional orthodontic appliances. To ensure clarity and precision, this review will specifically concentrate on fixed appliances. This systemic review followed the PRISMA guidelines and utilized databases including PubMed/MEDLINE, Embase, Springer, Web of Science, and Wiley. Searches were restricted to English language articles from January 2013 to February 2024. Keywords such as "Polyetheretherketone" or "PEEK" and "Orthodontic" or "Orthodontic device" or "Orthodontic materials" were employed across all databases. Nine studies were incorporated, covering orthodontic archwires, brackets, and fixed lingual retainers. Based on the reviewed literature, PEEK demonstrates promising potential in orthodontic fixed appliances, offering advantages in force delivery, friction reduction, and aesthetic appeal. Further research is needed to fully explore its capabilities and optimize its application in clinical practice.
PubMed: 38732740
DOI: 10.3390/polym16091271 -
Journal of Clinical and Experimental... Apr 2024The objective was to investigate the influence of the material and dimensions of the orthodontic archwire on the pain and anxiety in adult patients in orthodontic...
A pilot study analyzing the influence of the material and the size of the orthodontic archwire on the level of pain and anxiety in adult patients in treatment with brackets: A prospective triple-blind randomized clinical trial.
BACKGROUND
The objective was to investigate the influence of the material and dimensions of the orthodontic archwire on the pain and anxiety in adult patients in orthodontic treatment with brackets.
MATERIAL AND METHODS
A randomized prospective triple-blind clinical pilot study was conducted at the Dental Clinic of the University of Salamanca. The study sample comprised 30 adult patients who started orthodontic treatment with brackets. This sample was divided into two groups: the NiTi group (n=15) and Cu-NiTi group (n=15). Pain was analyzed with a visual analogue scale (VAS) and anxiety with the State-Trait Anxiety Inventory (STAI). Anxiety was assessed at the start of treatment (T0) and after one month (T1). Pain was analyzed at the start of treatment (T0), at different time points at the start (T01), and after 4 (T02), 24 (T03), and 48 hours (T04); these measurements were also recorded one month after starting orthodontic treatment (T11, T12, T13, and T14).
RESULTS
The mean age of patients was 31.3 (± 6.05) years old. The highest level of pain, at the beginning of treatment, was observed after 48 hours (5.57 ± 1.72) and at one month after starting treatment at 24 hours (5.13 ± 1.89), with no significant differences between the two groups. When analyzing anxiety, no differences were observed between groups; the anxiety levels were higher one month after starting treatment compared to the start. Regarding the correlation between pain and anxiety, the NiTi group showed a greater direct relationship (<0.05) between these two variables at the start of treatment in the anxiety trait in relation to pain at T02 and T03 and after a month in T12, T13, and T14.
CONCLUSIONS
In the sample studied, there was no significant influence of the size or material of the orthodontic archwire on pain and anxiety levels. Orthodontics, Brackets, Archwire, Pain, Anxiety, NiTi, Cu-NiTi.
PubMed: 38725824
DOI: 10.4317/jced.61428