-
Lab on a Chip Jun 2024We combine two-photon-excited fluorescence microscopy and acoustofluidic trapping in a spherical microchamber to study cells and cell clusters three-dimensionally close...
We combine two-photon-excited fluorescence microscopy and acoustofluidic trapping in a spherical microchamber to study cells and cell clusters three-dimensionally close to conditions. The two-photon microscopy provides the in-depth 3D analysis of the spherical microchamber dimensions as well as the positions of trapped samples therein with high spatial precision and high temporal resolution enabling even tracking of the fast moving particles. Furthermore, optical sectioning allows to gather information of individual cells in trapped cell clusters inside the chamber. We demonstrate real-time monitoring of osmosis in A549 lung cells and red blood cells as one possible biomedical application. The observed osmosis reduced the cell membrane diameter by approximately 4 μm in the A549 cells and by approximately 2 μm in the red blood cells. Our approach provides an important optical tool for future investigations of cell functions and cell-cell interactions avoiding wall-contact inside an acoustofluidic device.
PubMed: 38895892
DOI: 10.1039/d4lc00144c -
The Neurohospitalist Jul 2024The coronavirus 2019 (COVID-19) pandemic was associated with catastrophic consequences and increased psychological distress. However, it is unknown if the pandemic...
BACKGROUND AND PURPOSES
The coronavirus 2019 (COVID-19) pandemic was associated with catastrophic consequences and increased psychological distress. However, it is unknown if the pandemic impacted the frequency of functional seizures (FS), a well known manifestation of psychiatric disease. The study objectives are to evaluate FS diagnostic code frequency before and during the COVID-19 pandemic and the therapies applied. We hypothesized that FS frequency would be higher during the pandemic, but that the therapies applied would be similar between the two time periods.
METHODS
This was a retrospective observational cohort study utilizing the TriNetX ® electronic health record (EHR) database. We included subjects aged 8 to 65 years with a diagnostic code of "conversion disorder with seizures or convulsions." After the query, the study population was divided into 2 groups [pre-COVID-19 (3/1/2018 to 2/29/2020) and COVID-19 (3/1/2020 to 2/28/2022). We analyzed subject demographics, diagnostic, procedure, and medication codes.
RESULTS
We included 8680 subjects [5029 (57.9%) pre-COVID-19 and 3651 (42.1%) COVID-19] in this study. There was a higher odds of mental health conditions, anxiolytic prescription, emergency department services, and hospital services, but a lower odds of critical care services during COVID-19. There was no difference in antiepileptic use between the time periods.
CONCLUSIONS
During the COVID-19 pandemic, a higher odds of anxiolytic use, need for emergency department services, and hospital services was reported. In addition, there was a decreased odds of critical care services. This may reflect a change in how patients with FS were managed during the pandemic.
PubMed: 38895022
DOI: 10.1177/19418744241232011 -
Journal of Environmental Health Science... Jun 2024The escalating cadmium influx from industrial activities and anthropogenic sources has raised serious environmental concerns due to its toxic effects on ecosystems and... (Review)
Review
The escalating cadmium influx from industrial activities and anthropogenic sources has raised serious environmental concerns due to its toxic effects on ecosystems and human health. This review delves into the intricate mechanisms underlying microbial resistance to cadmium, shedding light on the multifaceted interplay between microorganisms and this hazardous heavy metal. Cadmium overexposure elicits severe health repercussions, including renal carcinoma, mucous membrane degradation, bone density loss, and kidney stone formation in humans. Moreover, its deleterious impact extends to animal and plant metabolism. While physico-chemical methods like reverse osmosis and ion exchange are employed to mitigate cadmium contamination, their costliness and incomplete efficacy necessitate alternative strategies. Microbes, particularly bacteria and fungi, exhibit remarkable resilience to elevated cadmium concentrations through intricate resistance mechanisms. This paper elucidates the ingenious strategies employed by these microorganisms to combat cadmium stress, encompassing metal ion sequestration, efflux pumps, and enzymatic detoxification pathways. Bioremediation emerges as a promising avenue for tackling cadmium pollution, leveraging microorganisms' ability to transform toxic cadmium forms into less hazardous derivatives. Unlike conventional methods, bioremediation offers a cost-effective, environmentally benign, and efficient approach. This review amalgamates the current understanding of microbial cadmium resistance mechanisms, highlighting their potential for sustainable remediation strategies. By unraveling the intricate interactions between microorganisms and cadmium, this study contributes to advancing our knowledge of bioremediation approaches, thereby paving the way for safer and more effective cadmium mitigation practices.
PubMed: 38887775
DOI: 10.1007/s40201-023-00887-6 -
RSC Advances Jun 2024Predicting the efficacy of micropollutant separation through functionalized membranes is an arduous endeavor. The challenge stems from the complex interactions between...
Predicting the efficacy of micropollutant separation through functionalized membranes is an arduous endeavor. The challenge stems from the complex interactions between the physicochemical properties of the micropollutants and the basic principles underlying membrane filtration. This study aimed to compare the effectiveness of a modest dataset on various machine learning tools (ML) tools in predicting micropollutant removal efficiency for functionalized reverse osmosis (RO) and nanofiltration (NF) membranes. The inherent attributes of both the micropollutants and the membranes are utilized as input factors. The chosen ML tools are supervised algorithm (adaptive network-based fuzzy inference system (NF), linear regression framework (linear regression (LR)), stepwise linear regression (SLR) and multivariate linear regression (MVR)), and unsupervised algorithm (support vector machine (SVM) and ensemble boosted tree (BT)). The feature engineering and parametric dependency analysis revealed that characteristics of micropollutants, such as maximum projection diameter (MaxP), minimal projection diameter (MinP), molecular weight (MW), and compound size (CS), exhibited a notably positive impact on the correlation with removal efficiency. Model combination with key variables demonstrated high prediction accuracy in both supervised and unsupervised ML for micropollutant removal efficiency. An NF-grid partitioning (NF-GP) model achieved the highest accuracy with an value of 0.965, accompanied by low error metrics, specifically an RMSE and MAE of 3.65. It is owed to the handling of the complex spatial and temporal aspects of micropollutant data through division into consistent subsets facilitating improved identification of rejection efficiency and relationships. The inclusion of inputs with both negative and positive correlations introduces variability, amplifies the system responsiveness, and impedes the precision of predictive models. This study identified key micropollutant properties, including MaxP, MinP, MW, and CS, as crucial factors for efficient micropollutant rejection during real-time filtration applications. It also allowed the design of pore size of self-prepared membranes for the enhanced separation of micropollutants from wastewater.
PubMed: 38887641
DOI: 10.1039/d4ra02475c -
Advanced Science (Weinheim,... Jun 2024Efficient 2D membranes play a critical role in water purification and desalination. However, most 2D membranes, such as graphene oxide (GO) membranes, tend to swell or...
Efficient 2D membranes play a critical role in water purification and desalination. However, most 2D membranes, such as graphene oxide (GO) membranes, tend to swell or disintegrate in liquid, making precise ionic sieving a tough challenge. Herein, the fabrication of the polyoxometalate clusters (PW) intercalated reduced graphene oxide (rGO) membrane (rGO-PW) is reported through a polyoxometalate-assisted in situ photoreduction strategy. The intercalated PW result in the interlayer spacing in the sub-nanometer scale and induce a nanoconfinement effect to repel the ions in various salt solutions. The permeation rate of rGO-PW membranes are about two orders of magnitude lower than those through the GO membrane. The confinement of nanochannels also generate the excellent non-swelling stability of rGO-PW membranes in aqueous solutions up to 400 h. Moreover, when applied in forward osmosis, the rGO-PW membranes with a thickness of 90 nm not only exhibit a high-water permeance of up to 0.11790 L m h bar and high NaCl rejection (98.3%), but also reveal an ultrahigh water/salt selectivity of 4740. Such significantly improved ion-exclusion ability and high-water flux benefit from the multi-interactions and nanoconfinement effect between PW and rGO nanosheets, which afford a well-interlinked lamellar structure via hydrogen bonding and van der Waals interactions.
PubMed: 38887207
DOI: 10.1002/advs.202402018 -
The Science of the Total Environment Jun 2024Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The... (Review)
Review
Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The pH-responsive membranes (PRMs) are particular categories of membranes that have an amazing aptitude to change their properties such as permeability, selectivity and surface charge in response to changes in pH levels. This review provides a brief introduction to mechanisms of pH-responsiveness in polymers and categorizes the applied polymers and functional groups. After that, different techniques for fabricating pH-responsive membranes such as grafting, the blending of pH-responsive polymers/microgels/nanomaterials, novel polymers and graphene-layered PRMs are discussed. The application of PRMs in different processes such as filtration membranes, reverse osmosis, drug delivery, gas separation, pervaporation and self-cleaning/antifouling properties with perspective to the challenges and future progress are reviewed. Lastly, the development and limitations of PRM fabrications and applications are compared to provide inclusive information for the advancement of next-generation PRMs with improved separation and filtration performance.
PubMed: 38880142
DOI: 10.1016/j.scitotenv.2024.173865 -
Journal of Environmental Management Jul 2024Nanofiltration (NF) has been proven to be with great potential for the separation of morpholines with molecular weight less than 200 Da in refining reverse osmosis...
Nanofiltration (NF) has been proven to be with great potential for the separation of morpholines with molecular weight less than 200 Da in refining reverse osmosis concentrate (ROC), but its application is significantly restricted by the membrane fouling, which can reduce the rejection and service time. To enable the long-term operation stability of nanofiltration, this work focuses on the fouling behavior of each substance in the hydrosaline organic solution on nanofiltration membrane, aiming to give insight into the fouling mechanism. To this end, in this work, the effects of salts (i.e NaCl and NaSO), organic substances (including N-(2-hydroxypropyl)morpholine(NMH) and 4-morpholineacetate(MHA)) and representative divalent ions (Ca and Mg) on the performance and physicochemical properties of DK membrane were systematically investigated. The results show that both salts and organics can induce DK membrane swelling, leading to an increase of the mean effective pore size. After the filtration of NaSO-NaCl-HO, the mean pore size increased by 0.002 nm, resulting in the decrease of the removal ratio of NMH and MHA for 3.82% and 13.10%, respectively. With static adsorption of NMH and MHA, the mean pore size of DK membrane increased by 0.005 and 0.003 nm. The swelling slowed the entrance of more organic molecules into membrane pores. Among them, MHA led to the terrible irreversible pore blocking. As the concentration of Ca increased, gypsum scaling was formed on the membrane surface. During this process, NMH and MHA played different roles, i.e. NMH accelerated the CaSO crystallization while MHA inhibited. As a conclusion, the fouling behavior of substances in the high saline organic wastewater on DK membrane were systematically revealed with the fouling mechanisms proposed, which could provide an insightful guidance for membrane fouling control and cleaning in the treatment of high salinity and organic wastewater.
Topics: Osmosis; Filtration; Membranes, Artificial; Water Purification; Morpholines; Adsorption
PubMed: 38878575
DOI: 10.1016/j.jenvman.2024.121443 -
Water Research Jun 2024Reverse osmosis (RO) system has been increasingly applied for circulating cooling water (CCW) reclamation. Plasticizers, which may be dissolved into CCW system in...
Reverse osmosis (RO) system has been increasingly applied for circulating cooling water (CCW) reclamation. Plasticizers, which may be dissolved into CCW system in plastic manufacturing industry, cannot be completely removed by the pretreatment prior to RO system, possibly leading to severe membrane biofouling. Deciphering the characteristics and mechanisms of RO membrane biofouling in the presence of trace plasticizers are of paramount importance to the development of effective fouling control strategies. Herein, we demonstrate that exposure to a low concentration (1 - 10 μg/L) of three typical plasticizers (Dibutyl phthalate (DBP), Tributyl phosphate (TBP) and 2,2,4-Trimethylpentane-1,3-diol (TMPD)) detected in pretreated real CCW promoted Escherichia coli biofilm formation. DBP, TBP and TMPD showed the highest stimulation at 5 or 10 μg/L with biomass increasing by 55.7 ± 8.2 %, 35.9 ± 9.5 % and 32.2 ± 14.7 % respectively, relative to the unexposed control. Accordingly, the bacteria upon exposure to trace plasticizers showed enhanced adenosine triphosphate (ATP) activity, stimulated extracellular polymeric substances (EPS) excretion and suppressed intracellular reactive oxygen species (ROS) induction, causing by upregulation of related genes. Long-term study further showed that the RO membranes flowing by the pretreated real CCW in a polypropylene plant exhibited a severer biofouling behavior than exposed control, and DBP and TBP parts played a key role in stimulation effects on bacterial proliferation. Overall, we demonstrate that RO membrane exposure to trace plasticizers in pretreated CCW can upregulate molecular processes and physiologic responses that accelerate membrane biofouling, which provides important implications for biofouling control strategies in membrane-based CCW treatment systems.
PubMed: 38878313
DOI: 10.1016/j.watres.2024.121937 -
Bioresource Technology Jun 2024The osmotic Membrane Bioreactor (OMBR) is a novel wastewater treatment and resource recovery technology combining forward osmosis (FO) and membrane bioreactor (MBR). It... (Review)
Review
The osmotic Membrane Bioreactor (OMBR) is a novel wastewater treatment and resource recovery technology combining forward osmosis (FO) and membrane bioreactor (MBR). It has attracted attention for its low energy consumption and high contaminant removal performance. However, in the long-term operation, OMBR faces the problem of salt accumulation due to high salt rejection and reverse salt flux, which affects microbial activity and contaminants removal efficiency. This review analyzed the feasibility of screening salt-tolerant microorganisms and determining salinity thresholds to improve the salt tolerance of OMBR. Combined with recent research, the inhibition strategies for salt accumulation were reviewed, including the draw solution, FO membrane, operating conditions and coupling with other systems. It is hoped to provide a theoretical basis and practical guidance for the further development of OMBR. Finally, future research directions were prospected. This review provided new insights for achieving stable operation of OMBR and will promote its wide application.
PubMed: 38876283
DOI: 10.1016/j.biortech.2024.130957 -
Analytical Methods : Advancing Methods... Jun 2024A novel bifunctional magnetic sorbent with mercapto and amino groups and ion imprinting (MBII) was synthesized using a one-step aqueous sol-gel process for...
A novel bifunctional magnetic sorbent with mercapto and amino groups and ion imprinting (MBII) was synthesized using a one-step aqueous sol-gel process for preconcentration and determination of Cd(II) ions. MBII was employed as a microcolumn (MC) filler in a flow-through system coupled to GFAAS. The magnetic properties of the solid allowed microcolumn magnetic solid-phase extraction (MCMSPE) to be performed by simply including a single circular magnet around the MC. This assembly enabled complete attachment of the solid to the MC wall leaving a central void to facilitate higher sample flow rates without blockage or material loss. For comparison, a bifunctional magnetic solid without imprinting (MBNI) was also synthesized and evaluated. Both MBII and MBNI were characterized by FTIR, SEM, EDX, BET and magnetization measurements. The results showed the preservation of the magnetic core, its superparamagnetism and the functional groups in the solid. Batch studies revealed a maximum adsorption capacity for both materials at pH around 6 with equilibrium reached within 5 minutes. The advantages were reflected in the maximum adsorption capacity of MBII, which was found to be 2.5 times greater than that of MBNI. Both adsorbents were compared as MC fillers for dynamic preconcentration in MCMSPE systems. Under optimized conditions, MBNI showed a PCF of 125 and MBII of 250. The higher selectivity of MBII was corroborated by interfering ion studies. The analytical performance parameters for the proposed method using MBII as an adsorbent showed a detection limit of 0.05 ng L, a linear range of 2.0-80 ng L, an RSD% of 2.2 ( = 7; 20 ng L) and a lifetime of more than 300 preconcentration-elution cycles without loss of sensitivity or need for refilling. The method was successfully applied to the determination of trace Cd(II) in osmosis, lake and tap water with recoveries ranging from 98 to 105%. Comparison of these results with those of similar reported methods showed a considerable improvement primarily attributed to the combined effect of MBII's higher retention capacity and its magnetic properties that allowed higher sample flow rates and, thus, enhanced figures of merit.
PubMed: 38874550
DOI: 10.1039/d3ay02047a