-
Biology Apr 2023Cortical bone microstructure assessment in biological and forensic anthropology can assist with the estimation of age-at-death and animal-human differentiation, for...
Cortical bone microstructure assessment in biological and forensic anthropology can assist with the estimation of age-at-death and animal-human differentiation, for example. Osteonal structures within cortical bone are the key feature under analysis, with osteon frequency and metric parameters providing crucial information for the assessment. Currently, the histomorphological assessment consists of a time-consuming manual process for which specific training is required. Our work investigates the feasibility of automatic analysis of human bone microstructure images through the application of deep learning. In this paper, we use a U-Net architecture to address the semantic segmentation of such images into three classes: intact osteons, fragmentary osteons, and background. Data augmentation was used to avoid overfitting. We evaluated our fully automatic approach using a sample of 99 microphotographs. The contours of intact and fragmentary osteons were traced manually to provide ground truth. The Dice coefficients were 0.73 for intact osteons, 0.38 for fragmented osteons, and 0.81 for background, giving an average of 0.64. The Dice coefficient of the binary classification osteon-background was 0.82. Although further refinement of the initial model and tests with larger datasets are needed, this study provides, to the best of our knowledge, the first proof of concept for the use of computer vision and deep learning for differentiating both intact and fragmentary osteons in human cortical bone. This approach has the potential to widen and facilitate the use of histomorphological assessment in the biological and forensic anthropology communities.
PubMed: 37106819
DOI: 10.3390/biology12040619 -
Frontiers in Bioengineering and... 2023Osteons are composed of concentric lamellar structure, the concentric lamellae are composed of periodic thin and thick sub-lamellae, and every 5 sub-lamellae is a cycle,...
Osteons are composed of concentric lamellar structure, the concentric lamellae are composed of periodic thin and thick sub-lamellae, and every 5 sub-lamellae is a cycle, the periodic helix angle of mineralized collagen fibers in two adjacent sub-lamellae is 30°. Four biomimetic models with different fiber helix angles were established and fabricated according to the micro-nano structure of osteon. The effects of the fiber periodic helical structure on impact characteristic and energy dissipation of multi-layer biomimetic composite were investigated. The calculation results indicated that the stress distribution, contact characteristics and fiber failur during impact, and energy dissipation of the composite are affected by the fiber helix angle. The stress concentration of composite materials under external impact can be effectively improved by adjusting the fiber helix angle when the material composition and material performance parameters are same. Compared with the sample30, the maximum stress of sample60 and sample90 increases by 38.1% and 69.8%, respectively. And the fiber failure analysis results shown that the model with a fiber helix angle of 30° has a better resist impact damage. The drop-weight test results shown that the impact damage area of the specimen with 30° helix angle is smallest among the four types of biomimetic specimens. The periodic helical structure of mineralized collagen fibers in osteon can effectively improve the impact resistance of cortical bone. The research results can provide useful guidance for the design and manufacture of high-performance, impact-resistant biomimetic composite materials.
PubMed: 37091332
DOI: 10.3389/fbioe.2023.999137 -
American Journal of Biological... Jun 2023A Geographical Information System (GIS) approach enhances the acquisition, management, and analysis of trace element data from cortical bone. A high-resolution spatial...
OBJECTIVES
A Geographical Information System (GIS) approach enhances the acquisition, management, and analysis of trace element data from cortical bone. A high-resolution spatial dimension expands the research potential of Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) data from cortical bone cross-sections. The chemical characterization of hundreds of osteons, notably sequences of superimposed osteons, permits more exacting studies of individual life histories than is possible with analyses of bulk bone samples.
METHODS
A GIS procedure was used to estimate Sr, Ba, Pb, and Cu concentrations, originally generated through LA-ICP-MS, for bone microstructural features, notably fragmentary and intact osteons, in a human femoral cross-section. The skeleton is from Ribe, Denmark, and dates to the early modern period.
RESULTS
Postmortem chemical alteration was limited to the bone's outer and inner margins. Two dietary indicators, Sr and Ba, and two socioeconomic indicators, Pb and Cu, measured for individual osteons were correlated with one another. Osteon sequences indicate concentrations of all four elements increased late in life for this individual.
CONCLUSIONS
The application of GIS procedures expedites fine-grained analyses of variation in the distribution of trace elements in bone microstructure identifiable in cortical bone cross-sections. It provides an efficient means of extracting the most information possible from LA-ICP-MS data about the lives of people in the past. Combining the two procedures makes it easier to track exposure to elements such as Pb across the part of an individual's life represented by osteon sequences.
Topics: Humans; Trace Elements; Lead; Bone and Bones; Laser Therapy; Denmark
PubMed: 37073983
DOI: 10.1002/ajpa.24747 -
Hua Xi Kou Qiang Yi Xue Za Zhi = Huaxi... Apr 2023This study aimed to investigate the effect of new biomimetic micro/nano surfaces on the osteoclastic differentiation of RAW264.7 macrophages by simulating natural...
OBJECTIVES
This study aimed to investigate the effect of new biomimetic micro/nano surfaces on the osteoclastic differentiation of RAW264.7 macrophages by simulating natural osteons for the design of concentric circular structures and modifying graphene oxide (GO).
METHODS
The groups were divided into smooth titanium surface group (SS), concentric microgrooved titanium surface group (CMS), and microgroove modified with GO group (GO-CMS). The physicochemical properties of the material surfaces were studied using scanning electron microscopy (SEM), contact-angle measurement, atomic force microscopy, X-ray photoelectron spectroscopy analysis, and Raman spectroscopy. The effect of the modified material surface on the cell biological behavior of RAW264.7 was investigated by cell-activity assay, SEM, and laser confocal microscopy. The effect on the osteoclastic differentiation of macrophages was investiga-ted by tartrate-resistant acid phosphatase (TRAP) immunofluorescence staining and quantitative real-time polymerase chain reaction (qRT-PCR) experiments.
RESULTS
Macrophages were arranged in concentric circles along the microgrooves, and after modification with GO, the oxygen-containing groups on the surface of the material increased and hydrophilicity increased. Osteoclasts in the GO-CMS group were small in size and number and had the lowest TRAP expression. Although it promoted the proliferation of macrophages in the GO-CMS group, the expression of osteoclastic differentiation-related genes was lower than that in the SS group, and the difference was statistically significant (<0.05).
CONCLUSIONS
Concentric circular microgrooves restricted the fusion of osteoclasts and the formation of sealing zones. Osteomimetic concentric microgrooves modified with GO inhibited the osteoclastic differentiation of RAW 264.7 macrophages.
Topics: Graphite; Titanium; Haversian System; Macrophages; Cell Differentiation; Oxides; Surface Properties
PubMed: 37056182
DOI: 10.7518/hxkq.2023.2022354 -
Journal of Synchrotron Radiation May 2023Palaeohistological analysis has numerous applications in understanding the palaeobiology of extinct dinosaurs. Recent developments of synchrotron-radiation-based X-ray...
Palaeohistological analysis has numerous applications in understanding the palaeobiology of extinct dinosaurs. Recent developments of synchrotron-radiation-based X-ray micro-tomography (SXMT) have allowed the non-destructive assessment of palaeohistological features in fossil skeletons. Yet, the application of the technique has been limited to specimens on the millimetre to micrometre scale because its high-resolution capacity has been obtained at the expense of a small field of view and low X-ray energy. Here, SXMT analyses of dinosaur bones with widths measuring ∼3 cm under a voxel size of ∼4 µm at beamline BL28B2 at SPring-8 (Hyogo, Japan) are reported, and the advantages of virtual-palaeohistological analyses with large field of view and high X-ray energy are explored. The analyses provide virtual thin-sections visualizing palaeohistological features comparable with those obtained by traditional palaeohistology. Namely, vascular canals, secondary osteons and lines of arrested growth are visible in the tomography images, while osteocyte lacunae are unobservable due to their micrometre-scale diameter. Virtual palaeohistology at BL28B2 is advantageous in being non-destructive, allowing multiple sampling within and across skeletal elements to exhaustively test the skeletal maturity of an animal. Continued SXMT experiments at SPring-8 should facilitate the development of SXMT experimental procedures and aid in understanding the paleobiology of extinct dinosaurs.
Topics: Animals; Fossils; Dinosaurs; Synchrotrons; X-Rays; X-Ray Microtomography
PubMed: 37026390
DOI: 10.1107/S1600577523001790 -
Biology Mar 2023In forensic anthropology, the differential diagnosis between peri- and postmortem bone fractures is mainly based on macroscopic criteria. In contrast, studies focusing...
In forensic anthropology, the differential diagnosis between peri- and postmortem bone fractures is mainly based on macroscopic criteria. In contrast, studies focusing on bone histology are very scarce. In a recent publication, we showed that (perimortem) fractures in fresh human bones exhibit a different osteonal microcracking pattern than (postmortem) damage in dry bones. In the current work, we explored whether this osteonal microcracking pattern is distinctive of the vitality of (perimortem) fresh bone fractures. To this end, we compared the number, length and structural distribution of microcracks in vital humeral fractures from forensic autopsy cases with experimentally reproduced, three point-bending fractures in fresh and dry human humeri. Half of the fresh experimental bones were fractured whilst applying axial compression, i.e., attempting to simulate intra vitam conditions more accurately. The results showed a similar osteonal microcracking pattern between vital fractures and experimental fractures of fresh humeri subjected to axial compression. Interestingly, this pattern was significantly different from the one observed in the experimental fractures of fresh humeri without axial compression and dry humeri. This supports our hypothesis that the osteonal microcracking pattern can potentially be used as a marker for vital perimortem trauma, providing a histomorphometric tool for fracture timing.
PubMed: 36979091
DOI: 10.3390/biology12030399 -
Surgical and Radiologic Anatomy : SRA May 2023The aim of our study is to study the prevalence and anatomy of scapular foramina (SF) and scapular nutrient foramina (SNF) in dried skeletons from the Northeastern Thai...
PURPOSE
The aim of our study is to study the prevalence and anatomy of scapular foramina (SF) and scapular nutrient foramina (SNF) in dried skeletons from the Northeastern Thai population.
METHODS
A total of 150 dried scapulae were investigated. Both SF and SNF were identified using a metal wire with a diameter of 0.36 mm. The number, locations, lengths, and diameters of SF were recorded. Subsequently, SNF were identified using the same metal wire. Their number and locations were recorded. Two observers performed the evaluations and measurements.
RESULTS
SF were present in 78.0% of scapulae. They could have up to five openings. Eighteen types were found. On average they were longer in males (21.7 ± 5.0 mm) than females (19.45 ± 4.6 mm). The mean diameters of both the superior and inferior openings were significantly greater in females (p < 0.01). SNF, in contrast, were present in 100% of scapulae. They were located in the supraspinous fossa (36.7%), subscapular fossa (31.3%), infraspinous fossa (22.8%), and peri-glenoid area (10.0%).
CONCLUSION
Unlike previous studies, the present study suggests that SF are normal anatomical findings, present in 78.0% of the scapulae investigated. Surgeons should be aware of both SNF and SF when operating or interpreting radiological findings.
Topics: Male; Female; Humans; Scapula; Haversian System; Surgeons; Nutrients
PubMed: 36947179
DOI: 10.1007/s00276-023-03132-9 -
Computer Methods in Biomechanics and... 2024The bone lacunar-canalicular system (LCS) is a unique complex 3D microscopic tubular network structure within the osteon that contains interstitial fluid flow to ensure...
The bone lacunar-canalicular system (LCS) is a unique complex 3D microscopic tubular network structure within the osteon that contains interstitial fluid flow to ensure the efficient transport of signaling molecules, nutrients, and wastes to guarantee the normal physiological activities of bone tissue. The mass transfer laws in the LCS under microgravity and hypergravity are still unclear. In this paper, a multi-scale 3D osteon model was established to mimic the cortical osteon, and a finite element method was used to numerically analyze the mass transfer in the LCS under hypergravity, normal gravity and microgravity and combined with high-intensity exercise conditions. It was shown that hypergravity promoted mass transfer in the LCS to the deep lacunae, and the number of particles in lacunae increased more significantly from normal gravity to hypergravity the further away from the Haversian canal. The microgravity environment inhibited particles transport in the LCS to deep lacunae. Under normal gravity and microgravity, the number of particles in lacunae increased greatly when doing high-intensity exercise compared to stationary standing. This paper presents the first simulation of mass transfer within the LCS with different gravity fields combined with high-intensity exercise using the finite element method. The research suggested that hypergravity can greatly promote mass transfer in the LCS to deep lacunae, and microgravity strongly inhibited this mass transfer; high-intensity exercise increased the mass transfer rate in the LCS. This study provided a new strategy to combat and treat microgravity-induced osteoporosis.
Topics: Hypergravity; Weightlessness; Bone and Bones; Computer Simulation
PubMed: 36912751
DOI: 10.1080/10255842.2023.2187738 -
Royal Society Open Science Mar 2023Here we examine the tibial microstructure of modern and fossil angulate tortoises to assess the histology and growth from the late Miocene-early Pliocene, Pleistocene...
Here we examine the tibial microstructure of modern and fossil angulate tortoises to assess the histology and growth from the late Miocene-early Pliocene, Pleistocene through to modern forms. The cross-sections of all the tibiae sampled revealed highly vascularized, uninterrupted, fibrolamellar bone tissue during early ontogeny, which suggests that early growth was fast. However, later in ontogeny, growth was slower, as indicated by the deposition of parallel-fibred bone tissue in the outer cortex, and even ceased periodically, as indicated by lines of arrested growth. Comparative analyses of the growth rates of the tortoises from different time periods showed that the tortoises from the late Miocene-early Pliocene Langebaanweg locality and from Diepkloof Rock Shelter had relatively slower growth rates under less optimal growth conditions. Additionally, these prehistoric specimens show extensive remodelling, and several generations of secondary osteons further suggest functional and/or metabolic stresses on the skeleton. Palaeoenvironmental reconstructions suggest that it was mostly cooler and drier with seasonal fluctuations in late Miocene-early Pliocene, and it is likely that responded to these conditions by having a lower rate of growth as compared with their modern counterparts, which thrive in the current prevailing more favourable Mediterranean type of climate.
PubMed: 36908987
DOI: 10.1098/rsos.230064 -
International Journal of Molecular... Mar 2023The repair of orthopedic and maxillofacial defects in modern medicine currently relies heavily on the use of autograft, allograft, void fillers, or other structural...
The repair of orthopedic and maxillofacial defects in modern medicine currently relies heavily on the use of autograft, allograft, void fillers, or other structural material composites. This study examines the in vitro osteo regenerative potential of polycaprolactone (PCL) tissue scaffolding, fabricated via a three-dimensional (3D) additive manufacturing technology, i.e., a pneumatic micro extrusion (PME) process. The objectives of this study were: (i) To examine the innate osteoinductive and osteoconductive potential of 3D-printed PCL tissue scaffolding and (ii) To perform a direct in vitro comparison of 3D-printed PCL scaffolding with allograft Allowash cancellous bone cubes with regards to cell-scaffold interactions and biocompatibility with three primary human bone marrow (hBM) stem cell lines. This study specifically examined cell survival, cell integration, intra-scaffold cell proliferation, and differentiation of progenitor cells to investigate the potential of 3D-printed PCL scaffolds as an alternative to allograft bone material for the repair of orthopedic injuries. We found that mechanically robust PCL bone scaffolds can be fabricated via the PME process and the resulting material did not elicit detectable cytotoxicity. When the widely used osteogenic model SAOS-2 was cultured in PCL extract medium, no detectable effect was observed on cell viability or proliferation with multiple test groups showing viability ranges of 92.2% to 100% relative to a control group with a standard deviation of ±10%. In addition, we found that the honeycomb infill pattern of the 3D-printed PCL scaffold allowed for superior mesenchymal stem-cell integration, proliferation, and biomass increase. When healthy and active primary hBM cell lines, having documented in vitro growth rates with doubling times of 23.9, 24.67, and 30.94 h, were cultured directly into 3D-printed PCL scaffolds, impressive biomass increase values were observed. It was found that the PCL scaffolding material allowed for biomass increase values of 17.17%, 17.14%, and 18.18%, compared to values of 4.29% for allograph material cultured under identical parameters. It was also found that the honeycomb scaffold infill pattern was superior to the cubic and rectangular matrix structures, and provided a superior microenvironment for osteogenic and hematopoietic progenitor cell activity and auto-differentiation of primary hBM stem cells. Histological and immunohistochemical studies performed in this work confirmed the regenerative potential of PCL matrices in the orthopedic setting by displaying the integration, self-organization, and auto-differentiation of hBM progenitor cells within the matrix. Differentiation products including mineralization, self-organizing "proto-osteon" structures, and in vitro erythropoiesis were observed in conjunction with the documented expression of expected bone marrow differentiative markers including CD-99 (>70%), CD-71 (>60%), and CD-61 (>5%). All of the studies were conducted without the addition of any exogenous chemical or hormonal stimulation and exclusively utilized the abiotic and inert material polycaprolactone; setting this work apart from the vast majority of contemporary investigations into synthetic bone scaffold fabrication In summary, this study demonstrates the unique clinical potential of 3D-printed PCL scaffolds for stem cell expansion and incorporation into advanced microstructures created via PME manufacturing to generate a physiologically inert temporary bony defect graft with significant autograft features for enhanced end-stage healing.
Topics: Humans; Bone Marrow Cells; Caproates; Osteogenesis; Polyesters; Printing, Three-Dimensional; Tissue Engineering; Tissue Scaffolds; Mesenchymal Stem Cells
PubMed: 36902373
DOI: 10.3390/ijms24054940