-
Pharmaceutics May 2024Astatine-211 (At) has emerged as a promising radionuclide for targeted alpha therapy of cancer by virtue of its favorable nuclear properties. However, the limited in... (Review)
Review
Astatine-211 (At) has emerged as a promising radionuclide for targeted alpha therapy of cancer by virtue of its favorable nuclear properties. However, the limited in vivo stability of At-labeled radiopharmaceuticals remains a major challenge. This review provides a comprehensive overview of the current strategies for At radiolabeling, including nucleophilic and electrophilic substitution reactions, as well as the recent advances in the development of novel bifunctional coupling agents and labeling approaches to enhance the stability of At-labeled compounds. The preclinical and clinical applications of At-labeled radiopharmaceuticals, including small molecules, peptides, and antibodies, are also discussed. Looking forward, the identification of new molecular targets, the optimization of At production and quality control methods, and the continued evaluation of At-labeled radiopharmaceuticals in preclinical and clinical settings will be the key to realizing the full potential of At-based targeted alpha therapy. With the growing interest and investment in this field, At-labeled radiopharmaceuticals are poised to play an increasingly important role in future cancer treatment.
PubMed: 38931860
DOI: 10.3390/pharmaceutics16060738 -
Sensors (Basel, Switzerland) Jun 2024In recent years, underwater wireless ultrasonic energy transmission technology (UWUET) has attracted much attention because it utilizes the propagation characteristics...
In recent years, underwater wireless ultrasonic energy transmission technology (UWUET) has attracted much attention because it utilizes the propagation characteristics of ultrasound in water. Effectively evaluating the performance of underwater ultrasonic wireless energy transmission is a key issue in engineering design. The current approach to performance evaluation is usually based on the system energy transfer efficiency as the main criterion, but this criterion mainly considers the overall energy conversion efficiency between the transmitting end and the receiving end, without an in-depth analysis of the characteristics of the distribution of the underwater acoustic field and the energy loss that occurs during the propagation of acoustic waves. In addition, existing methods focusing on acoustic field analysis tend to concentrate on a single parameter, ignoring the dynamic distribution of acoustic energy in complex aquatic environments, as well as the effects of changes in the underwater environment on acoustic propagation, such as spatial variability in temperature and salinity. These limitations reduce the usefulness and accuracy of models in complex marine environments, which in turn reduces the efficiency of acoustic energy management and optimization. To solve these problems, this study proposes a method to evaluate the performance of underwater ultrasonic energy radiation based on the spatial distribution characteristics of acoustic power. By establishing an acoustic power distribution model in a complex impedance-density aqueous medium and combining numerical simulation and experimental validation, this paper explores the spatial variation of acoustic power and its impact on the energy transfer efficiency in depth. Using high-resolution spatial distribution data and actual environmental parameters, the method significantly improves the accuracy of the assessment and the adaptability of the model in complex underwater environments. The results show that, compared with the traditional method, this method performs better in terms of the accuracy of the acoustic energy radiation calculation results, and is able to reflect the energy distribution and spatial heterogeneity of the acoustic source more comprehensively, which provides an important theoretical basis and practical guidance for the optimal design and performance enhancement of the underwater ultrasonic wireless energy transmission system.
PubMed: 38931727
DOI: 10.3390/s24123942 -
Sensors (Basel, Switzerland) Jun 2024This paper investigates the electromagnetic fields being scattered by a metal spherical object in a vacuum environment, providing a numerical implementation of the...
This paper investigates the electromagnetic fields being scattered by a metal spherical object in a vacuum environment, providing a numerical implementation of the obtained analytical results. A time-harmonic magnetic dipole source, far enough, emits the incident field at low frequencies, oriented arbitrarily in the three-dimensional space. The aim is to find a detailed solution to the scattering problem at spherical coordinates, which is useful for data inversion. Based on the theory of low frequencies, the Maxwell-type problem is transformed into Laplace's or Poisson's interconnected equations, accompanied by the proper boundary conditions on the perfectly conducting sphere and the radiation conditions at infinity, which are solved gradually. Broadly, the static and the first three dynamic terms are sufficient, while the terms of a higher order are negligible, which is confirmed by the field graphical representation.
PubMed: 38931592
DOI: 10.3390/s24123807 -
Sensors (Basel, Switzerland) Jun 2024Due to limitations in current motion tracking technologies and increasing interest in alternative sensors for motion tracking both inside and outside the MRI system, in...
Due to limitations in current motion tracking technologies and increasing interest in alternative sensors for motion tracking both inside and outside the MRI system, in this study we share our preliminary experience with three alternative sensors utilizing diverse technologies and interactions with tissue to monitor motion of the body surface, respiratory-related motion of major organs, and non-respiratory motion of deep-seated organs. These consist of (1) a Pilot-Tone RF transmitter combined with deep learning algorithms for tracking liver motion, (2) a single-channel ultrasound transducer with deep learning for monitoring bladder motion, and (3) a 3D Time-of-Flight camera for observing the motion of the anterior torso surface. Additionally, we demonstrate the capability of these sensors to simultaneously capture motion data outside the MRI environment, which is particularly relevant for procedures like radiation therapy, where motion status could be related to previously characterized cyclical anatomical data. Our findings indicate that the ultrasound sensor can track motion in deep-seated organs (bladder) as well as respiratory-related motion. The Time-of-Flight camera offers ease of interpretation and performs well in detecting surface motion (respiration). The Pilot-Tone demonstrates efficacy in tracking bulk respiratory motion and motion of major organs (liver). Simultaneous use of all three sensors could provide complementary motion information outside the MRI bore, providing potential value for motion tracking during position-sensitive treatments such as radiation therapy.
Topics: Humans; Magnetic Resonance Imaging; Respiration; Liver; Movement; Urinary Bladder; Algorithms; Deep Learning; Motion; Ultrasonography
PubMed: 38931494
DOI: 10.3390/s24123710 -
Sensors (Basel, Switzerland) Jun 2024The advent of nanotechnology has motivated a revolution in the development of miniaturized sensors. Such sensors can be used for radiation detection, temperature...
The advent of nanotechnology has motivated a revolution in the development of miniaturized sensors. Such sensors can be used for radiation detection, temperature sensing, radio-frequency sensing, strain sensing, and more. At the nanoscale, integrating the materials of interest into sensing platforms can be a common issue. One promising platform is photonic crystal fibers, which can draw in optically sensitive nanoparticles or have its optical properties changed by specialized nanomaterials. However, testing these sensors at scale is limited by the the need for specialized equipment to integrate these photonic crystal fibers into optical fiber systems. Having a method to enable rapid prototyping of new nanoparticle-based sensors in photonic crystal fibers would open up the field to a wider range of laboratories that could not have initially studied these materials in such a way before. This manuscript discusses the improved processes for cleaving, drawing, and rapidly integrating nanoparticle-based photonic crystal fibers into optical system setups. The method proposed in this manuscript achieved the following innovations: cleaving at a quality needed for nanoparticle integration could be done more reliably (≈100% acceptable cleaving yield versus ≈50% conventionally), nanoparticles could be drawn at scale through photonic crystal fibers in a safe manner (a method to draw multiple photonic crystal fibers at scale versus one fiber at a time), and the new photonic crystal fiber mount was able to be finely adjusted when increasing the optical coupling before inserting it into an optical system (before, expensive fusion splicing was the only other method).
PubMed: 38931493
DOI: 10.3390/s24123707 -
Sensors (Basel, Switzerland) Jun 2024This paper presents the construction of an innovative high-temperature sensor based on the optical principle. The sensor is designed especially for the measurement of...
This paper presents the construction of an innovative high-temperature sensor based on the optical principle. The sensor is designed especially for the measurement of exhaust gases with a temperature range of up to +850 °C. The methodology is based on two principles-luminescence and dark body radiation. The core of this study is the description of sensing element construction together with electronics and the system of photodiode dark current compensation. An advantage of this optical-based system is its immunity to strong magnetic fields. This study also discusses results achieved and further steps. The solution is covered by a European Patent.
PubMed: 38931486
DOI: 10.3390/s24123703 -
Molecules (Basel, Switzerland) Jun 2024The integration of two-dimensional TiCT nanosheets and other materials offers broader application options in the antibacterial field. TiCT-based composites demonstrate... (Review)
Review
The integration of two-dimensional TiCT nanosheets and other materials offers broader application options in the antibacterial field. TiCT-based composites demonstrate synergistic physical, chemical, and photodynamic antibacterial activity. In this review, we aim to explore the potential of TiCT-based composites in the fabrication of an antibiotic-free antibacterial agent with a focus on their systematic classification, manufacturing technology, and application potential. We investigate various components of TiCT-based composites, such as metals, metal oxides, metal sulfides, organic frameworks, photosensitizers, etc. We also summarize the fabrication techniques used for preparing TiCT-based composites, including solution mixing, chemical synthesis, layer-by-layer self-assembly, electrostatic assembly, and three-dimensional (3D) printing. The most recent developments in antibacterial application are also thoroughly discussed, with special attention to the medical, water treatment, food preservation, flexible textile, and industrial sectors. Ultimately, the future directions and opportunities are delineated, underscoring the focus of further research, such as elucidating microscopic mechanisms, achieving a balance between biocompatibility and antibacterial efficiency, and investigating effective, eco-friendly synthesis techniques combined with intelligent technology. A survey of the literature provides a comprehensive overview of the state-of-the-art developments in TiCT-based composites and their potential applications in various fields. This comprehensive review covers the variety, preparation methods, and applications of TiCT-based composites, drawing upon a total of 171 English-language references. Notably, 155 of these references are from the past five years, indicating significant recent progress and interest in this research area.
Topics: Anti-Bacterial Agents; Titanium; Humans; Biocompatible Materials
PubMed: 38930967
DOI: 10.3390/molecules29122902 -
Micromachines May 2024Surface plasmon polaritons (SPPs) have become a research hotspot due to their high intensity and subwavelength localization. Through free-electron excitation, a portion...
Surface plasmon polaritons (SPPs) have become a research hotspot due to their high intensity and subwavelength localization. Through free-electron excitation, a portion of the momentum of moving electrons can be converted into SPPs. Converting highly localized SPPs into a radiated field is an approach with the potential to aid in the development of a light radiation source. Reducing losses of SPPs is currently a critical challenge that needs to be addressed. The lifetime of SPPs in metal films is longer than that in metal blocks. Traditional optical gratings can transform SPPs into radiation to avoid the decay of SPPs in metal; however, they are created by etching metal films, so they tend to alter the dispersion characteristics of these films and will emit radiation in the direction perpendicular to the metal surface. This paper proposes an approach to converting the SPPs of a metal film excited by free electrons into a radiation field via lateral grating and obtaining in-plane radiation. We investigate the properties of SPP lateral radiation. The study of lateral radiation from metal films holds significant importance for SPP radiation sources and SPP on-chip circuit development.
PubMed: 38930693
DOI: 10.3390/mi15060723 -
Micromachines May 2024THz radiation has gained great importance due to its potential applications in a wide variety of fields. For this reason, continuous efforts have been made to develop...
THz radiation has gained great importance due to its potential applications in a wide variety of fields. For this reason, continuous efforts have been made to develop technological tools for use in this versatile band of the electromagnetic spectrum. Here, we propose a reflecting device with long focusing performances in the sub-THz band, using a bimirror device in which the relative angle is mechanically adjusted with the displacement of one of the mirrors. Despite the simplicity of the setup, the performance of this device is satisfactory down to a frequency of 0.1 THz. Theory and experience confirm that the bimirror is capable of focusing 0.1 THz radiation with a 2× magnification of the maximum input intensity while maintaining a longitudinal full width at half maximum (FWHM) of about 6 mm, which is about 12 times the depth of focus of a cylindrical optical element of the same focal length. In the absence of suitable THz equipment, the invariance property of the Fresnel diffraction integral allowed the predicted behavior to be tested in the THz range using conventional equipment operating at visible frequencies.
PubMed: 38930685
DOI: 10.3390/mi15060715 -
Temperature Effects of Nuclear and Electronic Stopping Power on Si and C Radiation Damage in 3C-SiC.Materials (Basel, Switzerland) Jun 2024Silicon carbide has been considered a material for use in the construction of advanced high-temperature nuclear reactors. However, one of the most important design...
Silicon carbide has been considered a material for use in the construction of advanced high-temperature nuclear reactors. However, one of the most important design issues for future reactors is the development of structural defects in SiC under a strong irradiation field at high temperatures. To understand how high temperatures affect radiation damage, SiC single crystals were irradiated at room temperature and after being heated to 800 °C with carbon and silicon ions of energies ranging between 0.5 and 21 MeV. The number of displaced atoms and the disorder parameters have been estimated by using the channeling Rutherford backscattering spectrometry. The experimentally determined depth profiles of induced defects at room temperature agree very well with theoretical calculations assuming its proportionality to the electronic and nuclear-stopping power values. On the other hand, a significant reduction in the number of crystal defects was observed for irradiations performed at high temperatures or for samples annealed after irradiation. Additionally, indications of saturation of the crystal defect concentration were observed for higher fluences and the irradiation of previously defected samples.
PubMed: 38930212
DOI: 10.3390/ma17122843