-
Clinical Oral Investigations Jun 2024Fixed orthodontic appliances may increase the risk for caries and white spot lesions. The aim of this retrospective study was to determine the long-term associations...
OBJECTIVES
Fixed orthodontic appliances may increase the risk for caries and white spot lesions. The aim of this retrospective study was to determine the long-term associations between both in orthodontic patients.
MATERIALS AND METHODS
103 patients aged 36.6 ± 6.5 years whose fixed appliance orthodontic treatment had finished at least 15 years ago were included. Current clinical data and photographs (T3), panoramic x-ray and photographs from before treatment (T0), after debonding (T1) and at 2-year follow-up (T2) were available. Parameters of interest were dentine caries, "Missing/Filled Teeth" (MFT), "White Spot Lesion" (WSL) index and "Periodontal Screening and Recording" index (PSR; T3 only).
RESULTS
At T0, 30.4% had no caries experience decreasing to 25.6%, 22.4% and 6.8% at T1, T2 and T3 resp. The median MFT (95% CI) at T0, T1, T2 and T3 was 2 (1;3), 3 (2;4), 3 (2;4) and 7 (6;9) resp. increasing significantly at each time point (p < 0.001 each); 30.1% had WSL at debonding. Patients with caries experience at T0 had a 2.4-fold increased risk of WSL at debonding. Dentine caries, caries experience and WSL at T1 were significantly associated with incident caries at T2, but not at T3. PSR at T3 had a significant association with previous caries incidence and WSL.
CONCLUSIONS
Caries experience prior to orthodontic treatment may constitute a risk indicator for WSL, and caries experience and WSL at its end for caries incidence in the near term.
CLINICAL RELEVANCE
Present caries and WSL may help identifying orthodontic patients with special need for prevention and counselling.
Topics: Humans; Dental Caries; Retrospective Studies; Male; Female; Adult; Radiography, Panoramic; Risk Factors; Orthodontic Appliances, Fixed; DMF Index
PubMed: 38861170
DOI: 10.1007/s00784-024-05752-w -
BMC Oral Health Jun 2024This study investigated the effect of carbodiimide (EDC) combined with Clearfil SE self-etch adhesive on the shear bond strength (SBS), crosslinking degree, denaturation...
BACKGROUND
This study investigated the effect of carbodiimide (EDC) combined with Clearfil SE self-etch adhesive on the shear bond strength (SBS), crosslinking degree, denaturation temperature, and enzyme activity of dentin in vitro.
MATERIALS AND METHODS
Collected human sound third molars were randomly divided into different groups with or without EDC treatment (0.01-1 M). The specimens (n = 16)were stored for 24 h (immediate) or 12 months (aging) before testing the SBS. Fine dentin powder was obtained and treated with the same solutions. Then the crosslinking degree, denaturation temperature (Td), and enzyme activity were tested. Statistical analysis was performed using a one-way analysis of variance (ANOVA) to compare the differences of data between groups (α = 0.05).
RESULTS
There was a significant drop in immediate SBS and more adhesive fracture of 1.0 M EDC group, while there were no significant differences among the other groups. SEM showed a homogeneous interface under all treatments. After 12 months of aging, the SBS significantly decreased. Less decreases of SBS in the 0.3 and 0.5 M groups were found. Due to thermal and enzymatical properties consideration, the 0.3 and 0.5 M treatments also showed higher cross-link degree and Td with lower enzyme activity.
CONCLUSION
0.3 and 0.5 M EDC may be favorable for delaying the aging of self-etch bond strength for 12 months. But it is still needed thoroughly study.
Topics: Humans; Carbodiimides; Resin Cements; Shear Strength; Materials Testing; Dentin; Microscopy, Electron, Scanning; Dentin-Bonding Agents; Dental Stress Analysis; Cross-Linking Reagents; Dental Bonding; In Vitro Techniques; Acid Etching, Dental; Molar, Third; Temperature; Time Factors; Surface Properties
PubMed: 38849778
DOI: 10.1186/s12903-024-04415-2 -
Materials (Basel, Switzerland) May 2024This study investigated the effect of 3 s light-curing with a high-power LED curing unit on the shear bond strength of bulk-fill composites. Four bulk-fill composites...
This study investigated the effect of 3 s light-curing with a high-power LED curing unit on the shear bond strength of bulk-fill composites. Four bulk-fill composites were bonded to dentin with a universal adhesive (Scotchbond Universal Plus): two materials designed for rapid curing (Tetric PowerFill and Tetric PowerFlow) and two controls (Filtek One Bulk Fill Restorative and SDR Plus Bulk Fill Flowable). The 4 mm composite layer was light-cured with Bluephase PowerCure for 20 s at 1000 mW/cm ("20 s") or for 3 s at 3000 mW/cm ("3 s"). The samples were stored at 37 °C in distilled water and tested after 1, 6 and 12 months. The samples polymerised in the "3 s" mode had statistically similar or higher bond strength than the samples cured in "20 s" mode, except for the Tetric PowerFlow (1 month) and SDR+ (6 month). The flowable materials Tetric PowerFlow and SDR Plus initially showed the highest values in the "3 s" and "20 s" groups, which decreased after 12 months. The bond strength was statistically similar for all materials and curing protocols after 12 months, except for Tetric PowerFill cured with the "3 s" protocol (21.22 ± 5.0 MPa), which showed the highest value. Tetric PowerFill showed the highest long-term bond strength. While "3 s" curing resulted in equal or better shear bond strength, its use can only be recommended for a material with an AFCT agent such as Tetric PowerFill.
PubMed: 38793364
DOI: 10.3390/ma17102297 -
Journal of Functional Biomaterials May 2024The aim of this study was to evaluate the effect of different irrigating solutions as well as their combination and activation modes on root canal dentin microhardness.... (Review)
Review
The aim of this study was to evaluate the effect of different irrigating solutions as well as their combination and activation modes on root canal dentin microhardness. The protocol was registered in PROSPERO and PRISMA guidelines were followed. The structured question was as follows: "Which type of irrigating solution used in endodontic treatment causes more change in dentin microhardness?" The literature was screened via PubMed, Google Scholar, Scopus, and Science Direct. The last search was carried out in February 2023 with English language restriction. Two reviewers independently performed screening and evaluation of articles. A total of 470 articles were retrieved from all the databases, whereas only 114 articles were selected for full-text analysis. After applying eligibility criteria, 44 studies were evaluated and included in this review. The results showed that with increased contact time with irrigants, dentin microhardness decreases. Increased contact time with sodium hypochlorite (NaOCl) was associated with more reduction in dentin microhardness compared with other irrigants. Other irrigants, with the exception of distilled water, including EDTA, citric acid, herbal irrigants, glycolic acid, phytic acid, etc., in this study significantly decreased dentin microhardness. The maximum reduction in dentin microhardness was seen with 2.5% NaOCl after 15 min of contact time. The use of irrigating solutions alters the chemical composition of dentin, thereby decreasing its microhardness, which affects the clinical performance of endodontically treated teeth.
PubMed: 38786643
DOI: 10.3390/jfb15050132 -
Journal of Functional Biomaterials May 2024There is a vast amount of published literature concerning dental veneers; however, the effects of tooth preparation, aging, veneer type, and resin cement type on the... (Review)
Review
There is a vast amount of published literature concerning dental veneers; however, the effects of tooth preparation, aging, veneer type, and resin cement type on the failure of dental veneers in laboratory versus clinical scenarios are not clear. The purpose of the present narrative review was to determine the principal factors associated with failures of dental veneers in laboratory tests and to understand how these factors translate into clinical successes/failures. Articles were identified and screened by the lead author in January 2024 using the keywords ''dental veneer", "complication", "survival rate", "failure", and "success rate" using PubMed/Medline, Scopus, Google Scholar, and Science Direct. The inclusion criteria included articles published between January 1999 and January 2024 on the topics of preparation of a tooth, aging processes of the resin cement and veneer, translucency, thickness, fabrication technique of the veneer; shade, and thickness of the resin cement. The exclusion criteria included articles that discussed marginal and internal fit, microhardness, water sorption, solubility, polishability, occlusal veneers, retention, surface treatments, and wear. The results of the present review indicated that dental veneers generally have a high survival rate (>90% for more than 10 years). The amount of preserved enamel layer plays a paramount role in the survival and success rates of veneers, and glass-ceramic veneers with minimal/no preparation showed the highest survival rates. Fracture was the primary failure mechanism associated with decreased survival rate, followed by debonding and color change. Fractures increased in the presence of parafunctional activities. Fewer endodontic complications were associated with veneer restorations. No difference was observed between the maxillary and mandibular teeth. Fractures can be reduced by evaluation of occlusion immediately after cementation and through the use of high-strength veneer materials, resin cements with low moduli, and thin layers of highly polished veneers. Debonding failures can be reduced with minimal/no preparation, and immediate dentin sealing should be considered when dentin is exposed. Debonding can also be reduced by preventing contamination from blood, saliva, handpiece oil, or fluoride-containing polishing paste; through proper surface treatment (20 s of hydrofluoric acid etching for glass ceramic followed by silane for 60 s); and through use of light-cured polymerization for thin veneers. Long-term color stability may be maintained using resin cements with UDMA-based resin, glass ceramic materials, and light-cure polymerization with thin veneers.
PubMed: 38786642
DOI: 10.3390/jfb15050131 -
JPMA. the Journal of the Pakistan... May 2024To compare the effect of propolis and gluma desensitisers on the management of dentin hypersensitivity. (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
OBJECTIVE
To compare the effect of propolis and gluma desensitisers on the management of dentin hypersensitivity.
METHODS
The single-blind, randomised controlled trial was conducted at the Department of Operative Dentistry, Dr Ishrat ul Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, Karachi, from October 2020 to September 2021, and comprised patients with dentin hypersensitivity who had pain scores of at least 2 on the visual analogue scale. The teeth were randomised into propolis group A and Gluma group B. Baseline pain scores were assessed using visual analogue scale and Schiff's sensitivity scores and compared with scores immediately after the intervention, and then after one week and one month of the intervention. Data was analysed using SPSS 23.
RESULTS
Of the 22 patients, 12(54.5%) were females and 10(45.4%) were males. Of the 80 teeth, there were 40(50%) in each of the 2 groups. Significant reduction was observed in dentin hypersensitivity immediately after the application of the desensitising agents (p<0.05). However, after one month, Gluma was more effective than propolis (p<0.05).
CONCLUSIONS
Both Gluma and propolis were found to be effective desensitising agents, but the effectiveness of propolis decreased over one month.
CLINICAL TRIAL NUMBER
Clinical Trials.gov: NCT04819867.
Topics: Humans; Propolis; Dentin Sensitivity; Female; Male; Adult; Dentin Desensitizing Agents; Single-Blind Method; Methacrylates; Pain Measurement; Young Adult; Middle Aged; Glutaral
PubMed: 38783427
DOI: 10.47391/JPMA.9924 -
BMC Oral Health May 2024Transforming Growth Factor-Beta 1 (TGF-β1) plays a crucial role in the success of Regenerative Endodontic Procedures (REPs) as they directly impact the proliferation...
INTRODUCTION
Transforming Growth Factor-Beta 1 (TGF-β1) plays a crucial role in the success of Regenerative Endodontic Procedures (REPs) as they directly impact the proliferation and differentiation of stem cells. TGF-β1 is released by conditioning of the dentin matrix using 17% EDTA. EDTA was found to have deleterious effects on dentin especially in immature teeth with fragile dentin walls. Decreasing the irrigation time was reported to decrease these effects. Accordingly, enhancement and activation of the EDTA solution to maintain its efficiency in TGF-β1 release from dentin and thus compensating the reduction in irrigation time was employed. EDTA solution was enhanced by adding Nanobubble (NB) water which contains oxygen filled cavities less than 200 nm in diameter. Additionally, EDTA was activated with XP-endo Finisher rotary file. The aim of this study was to assess the impact of NB enhancement and/or XP-endo Finisher activation of the EDTA solution on the TGF-β1 release from dentin.
METHODS
Fifty standardized root segments with open apex were allocated to two main groups according to whether EDTA was enhanced with NB water or not, and within each group whether XP-endo Finisher activation was used or not in addition to a Negative Control group. The concentration of the released TGF-β1 in the root canal was measured using enzyme-linked immunosorbent assay (ELISA). The statistical analysis was done using the Shapiro- Wilk, Kolmogorov Smirnov, ANOVA and Post-hoc Tukey tests.
RESULTS
All groups released a considerable amount of TGF-β1 with the highest values in the EDTA/NB/XP group, followed by EDTA/NB, EDTA/DW/XP, EDTA/DW and Negative Control groups respectively.
CONCLUSIONS
The results of this study suggest that NBs can promote the success of REPs since it revealed a significant increase in the TGF-β1 release following its use in the enhancement of the EDTA solution. A comparable effect was obtained by XP-endo finisher activation of the EDTA solution. The combined use of NBs and XP-endo Finisher can be a promising addition in REPs. Accordingly, Enhancement and activation of the EDTA solution may compensate decreasing the EDTA irrigation time attempted to avoid the deleterious effect of EDTA on dentin.
Topics: Edetic Acid; Transforming Growth Factor beta1; Humans; Dentin; Regenerative Endodontics; Root Canal Irrigants; Water; Root Canal Preparation; Enzyme-Linked Immunosorbent Assay
PubMed: 38778321
DOI: 10.1186/s12903-024-04355-x -
Brazilian Dental Journal 2024This in vitro study aimed to determine the efficacy of dentin bonding agents in preventing color changes following Regenerative Endodontic Procedures. One hundred twenty...
This in vitro study aimed to determine the efficacy of dentin bonding agents in preventing color changes following Regenerative Endodontic Procedures. One hundred twenty bovine incisors were endodontically prepared and randomly assigned to a two main factors design: application of a dentin bonding agent (Scotchbond Adper, 3M ESPE, St Paul, MN, USA) in the pulp chamber (Group 1, n=60) versus no bonding intervention (Group 2, n=60), and five levels of intracanal medication (n=12/subgroup): Triple antibiotic paste (TAP), double antibiotic paste (DAB), calcium hydroxide (CH), modified triple antibiotic paste (TAPM), and Control (CTL). Color changes were measured over 28 days at multiple time points (1, 3, 7, 14, 21, and 28 days) using the CIEDE2000 formula to calculate the color difference (ΔE00) from baseline (T0). The ΔE00 quantifies the perceptible color difference between the initial and final tooth color, with lower values indicating less discoloration. The results were analyzed using repeated measures ANOVA-2 and post-hoc Holm-Sidak tests. The TAP subgroups, both with and without the bonding agent, exhibited the highest color variation. However, a pulp chamber seal with a bonding agent showed a protective effect against discoloration compared to no seal, even though complete prevention was not achieved. All groups demonstrated ΔE00 values beyond acceptable interpretation thresholds for clinical application, primarily driven by a reduction in lightness (L*) and a decrease in redness (a* value, shifting towards green). In conclusion, while the pulp chamber seal with a bonding agent mitigated TAP-induced discoloration, it did not eliminate it.
Topics: Dentin-Bonding Agents; Animals; Cattle; In Vitro Techniques; Regenerative Endodontics; Color; Anti-Bacterial Agents; Tooth Discoloration; Calcium Hydroxide
PubMed: 38775591
DOI: 10.1590/0103-6440202405550 -
BMC Oral Health May 2024Extracellular matrix (ECM) protein malfunction or defect may lead to temporomandibular joint osteoarthritis (TMJ OA). Dentin sialophophoprotein (DSPP) is a mandibular...
BACKGROUND
Extracellular matrix (ECM) protein malfunction or defect may lead to temporomandibular joint osteoarthritis (TMJ OA). Dentin sialophophoprotein (DSPP) is a mandibular condylar cartilage ECM protein, and its deletion impacted cell proliferation and other extracellular matrix alterations of postnatal condylar cartilage. However, it remains unclear if long-term loss of function of DSPP leads to TMJ OA. The study aimed to test the hypothesis that long-term haploinsufficiency of DSPP causes TMJ OA.
MATERIALS AND METHODS
To determine whether Dspp mice exhibit TMJ OA but no severe tooth defects, mandibles of wild-type (WT), Dspp, and Dspp homozygous (Dspp) mice were analyzed by Micro-computed tomography (micro-CT). To characterize the progression and possible mechanisms of osteoarthritic degeneration over time in Dspp mice over time, condyles of Dspp and WT mice were analyzed radiologically, histologically, and immunohistochemically.
RESULTS
Micro-CT and histomorphometric analyses revealed that Dspp and Dspp mice had significantly lower subchondral bone mass, bone volume fraction, bone mineral density, and trabecular thickness compared to WT mice at 12 months. Interestingly, in contrast to Dspp mice which exhibited tooth loss, Dspp mice had minor tooth defects. RNA sequencing data showed that haplodeficency of DSPP affects the biological process of ossification and osteoclast differentiation. Additionally, histological analysis showed that Dspp mice had condylar cartilage fissures, reduced cartilage thickness, decreased articular cell numbers and severe subchondral bone cavities, and with signs that were exaggerated with age. Radiographic data showed an increase in subchondral osteoporosis up to 18 months and osteophyte formation at 21 months. Moreover, Dspp mice showed increased distribution of osteoclasts in the subchondral bone and increased expression of MMP2, IL-6, FN-1, and TLR4 in the mandibular condylar cartilage.
CONCLUSIONS
Dspp mice exhibit TMJ OA in a time-dependent manner, with lesions in the mandibular condyle attributed to hypomineralization of subchondral bone and breakdown of the mandibular condylar cartilage, accompanied by upregulation of inflammatory markers.
Topics: Animals; Osteoarthritis; Mice; X-Ray Microtomography; Sialoglycoproteins; Extracellular Matrix Proteins; Temporomandibular Joint Disorders; Phosphoproteins; Mandibular Condyle; Temporomandibular Joint
PubMed: 38745274
DOI: 10.1186/s12903-024-04320-8 -
Polymers Apr 2024This study evaluated the effect of simulated pulpal pressure (SPP) conditions and storage time on contemporary adhesive systems' microtensile bond strength (µTBS) to...
This study evaluated the effect of simulated pulpal pressure (SPP) conditions and storage time on contemporary adhesive systems' microtensile bond strength (µTBS) to dentin. Extracted human molars were prepared and randomly divided into four groups according to the adhesives: Clearfil Megabond 2 (CSE), Beautibond Xtreme Universal (BXU), G2-Bond (G2B), and Scotchbond Universal Plus (SBP). Each adhesive group was further divided following the SPP conditions: control with no simulation (SPP-CTR), SPP with distilled water (SPP-DTW), and SPP with fetal bovine serum (SPP-FBS). Resin composite build-ups were prepared, and teeth were stored in water (37 °C) for 24 h (24 h) and 3 months (3 m). Then, teeth were sectioned to obtain resin-dentin bonded beams and tested to determine the µTBS. Data were analyzed using three-way ANOVA, Tukey post hoc tests (=0.05), and Weibull failure analysis. Failure mode was observed using scanning electron microscopy. The µTBS response was affected by adhesive systems, simulated pulpal pressure conditions, and storage time. SPP-CTR groups presented a higher overall bond strength than SPP-DTW and SPP-FBS, which were not significantly different from each other. Only for SBP, the SPP-FBS group showed higher µTBS than the SPP-DTW group. The Weibull analysis showed that the bonding reliability and durability under SPP-DTW and SPP-FBS were inferior to SPP-CTR, and the 24 h bonding quality of adhesives to dentin was superior to that of 3 m. SPP drastically reduced the µTBS of all adhesives to dentin regardless of solution (distilled water or fetal bovine serum). Storage after 3 m also decreased µTBS despite the SPP condition.
PubMed: 38732688
DOI: 10.3390/polym16091219