-
Dental Materials Journal Aug 2023The purpose of the present study is to evaluate the fracture resistance and the fit of CAD-CAM produced inlay-retained fixed partial dentures. Eighteen experimental...
The purpose of the present study is to evaluate the fracture resistance and the fit of CAD-CAM produced inlay-retained fixed partial dentures. Eighteen experimental groups were generated according to different CAD-CAM ceramic materials (zirconia, lithium disilicate, and zirconia-reinforced lithium silicate), different connector dimensions (12, 14, and 16 mm), and application of thermomechanical-aging (1,200,000 cycles of cyclic loading with simultaneous thermal cycling). Gap values of thermomechanically-aged groups were measured by using periapical radiographs. Then, the specimens were tested for fracture resistance and failure types were examined. The results were statistically analyzed (α=0.05). Higher gap values were observed after aging. Zirconia showed the highest fracture resistance values among the most of the experimental groups. In non-aged groups, the most frequent failure type was decementation in zirconia group. In the aged groups, the most frequent failure type was molar connector fracture. Thermomechanical-aging increased the gap values and decreased the fracture resistance values.
Topics: Inlays; Materials Testing; Dental Restoration Failure; Dental Stress Analysis; Dental Porcelain; Ceramics; Zirconium; Denture, Partial, Fixed; Computer-Aided Design
PubMed: 37271542
DOI: 10.4012/dmj.2022-230 -
Journal of Oral Science Jul 2023To evaluate the clinical performance of two proposed onlay designs.
PURPOSE
To evaluate the clinical performance of two proposed onlay designs.
METHODS
Molars with occlusal and/or mesial/distal defects after root canal treatment were classified by design into three groups. Onlays without shoulders were the control group (Group C, n = 50). The designed onlays were Group O (n = 50) and the designed mesio-occlusal/disto-occlusal onlays were Group MO/DO (n = 80). All onlays had an occlusal thickness of approximately 1.5-2.0 mm, and the designed onlays had a shoulder depth and width of approximately 1 mm. In Groups C and O, the box-shaped retention was 1.5 mm in depth. The proximal box was connected with a dovetail retention in Group MO/DO. Patients were examined every 6 months and followed for 36 months. Restorations were evaluated by using the modified United States Public Health Service Criteria. Statistical analysis was performed by using Kaplan-Meier analysis, the chi-square test, and Fisher's exact test.
RESULTS
No tooth fracture, debonding, secondary caries, or gingivitis was observed in any group. Groups O and MO/DO had satisfactory survival and success rates, and there was no significant difference in performance characteristics among the three groups (P > 0.05).
CONCLUSION
The two proposed onlay designs were effective in protecting molars.
Topics: Humans; Inlays; Dental Porcelain; Ceramics; Dental Pulp Cavity; Molar
PubMed: 37245963
DOI: 10.2334/josnusd.22-0450 -
BMC Musculoskeletal Disorders May 2023Conventional polyethylene (PE) wear has been reported to be associated with femoral offset reconstruction and cup orientation after THA. Thus, the present study aimed...
INTRODUCTION
Conventional polyethylene (PE) wear has been reported to be associated with femoral offset reconstruction and cup orientation after THA. Thus, the present study aimed (1) to determine the polyethylene wear rate of 32 mm ceramic heads with highly cross-linked polyethylene (HXLPE) inlays up to 10 years postoperatively and (2) to identify patient and surgery-related factors affecting the wear rate.
METHODS
A prospective cohort study was performed, investigating 101 patients with 101 cementless THAs and ceramic (32 mm) on HXLPE bearings after 6-24 months, 2-5 years and 5-10 years postoperatively. The linear wear rate was determined using a validated software (PolyWare®, Rev 8, Draftware Inc, North Webster, IN, USA) by two reviewers, blinded to each other. A linear regression model was used to identify patient and surgery-related factors on HXLPE -wear.
RESULTS
After an initial bedding-in phase of 1 year after surgery, the mean linear wear rate was 0.059 ± 0.031 mm/y at ten years (mean 7.7 years; SD 0.6 years, range 6-10), being below the osteolysis relevant threshold of 0.1 mm/year. The regression analysis demonstrated that age at surgery, BMI, cup inclination or anteversion and the UCLA score were not associated with the linear HXLPE-wear rate. Only increased femoral offset showed a significant correlation with an increased HXLPE-wear rate (correlation coefficient of 0.303; p = 0.003) with a moderate clinical effect size (Cohen's f²=0.11).
CONCLUSION
In contrast to conventional PE inlays, hip arthroplasty surgeons may be less concerned about osteolysis-related wear of the HXLPE if the femoral offset is slightly increased. This allows focusing on joint anatomy reconstruction, hip stability and leg length.
Topics: Humans; Polyethylene; Arthroplasty, Replacement, Hip; Hip Prosthesis; Prospective Studies; Osteolysis; Femur Head; Prosthesis Failure; Ceramics; Prosthesis Design; Follow-Up Studies
PubMed: 37202754
DOI: 10.1186/s12891-023-06501-y -
Talanta Aug 2023A novel immunosensor based on electrochemiluminescence resonance energy transfer (ECL-RET) for the sensitive determination of N protein of the SARS-CoV-2 coronavirus is...
A novel immunosensor based on electrochemiluminescence resonance energy transfer (ECL-RET) for the sensitive determination of N protein of the SARS-CoV-2 coronavirus is described. For this purpose, bifunctional core@shell nanoparticles composed of a Pt-coated Au core and finally decorated with small Au inlays (Au@Pt/Au NPs) have been synthesized to act as ECL acceptor, using [Ru (bpy)] as ECL donor. These nanoparticles are efficient signaling probes in the immunosensor developed. The proposed ECL-RET immunosensor has a wide linear response to the concentration of N protein of the SARS-CoV-2 coronavirus with a detection limit of 1.27 pg/mL. Moreover, it has a high stability and shows no response to other proteins related to different virus. The immunosensor has achieved the quantification of N protein of the SARS-CoV-2 coronavirus in saliva samples. Results are consistent with those provided by a commercial colorimetric ELISA kit. Therefore, the developed immunosensor provides a feasible and reliable tool for early and effective detection of the virus to protect the population.
Topics: Humans; Gold; SARS-CoV-2; Metal Nanoparticles; Luminescent Measurements; Biosensing Techniques; Immunoassay; COVID-19; Electrochemical Techniques; Limit of Detection
PubMed: 37163926
DOI: 10.1016/j.talanta.2023.124614 -
Odontology Jan 2024The aim of this study was to assess the fracture behavior of molar teeth restored with MOD inlays made of experimental short fiber-reinforced CAD/CAM composite block...
The aim of this study was to assess the fracture behavior of molar teeth restored with MOD inlays made of experimental short fiber-reinforced CAD/CAM composite block (SFRC CAD) before and after cyclic fatigue aging. Standardized MOD cavities were prepared on 60 intact mandibular molars. Three groups of CAD/CAM made inlay restorations (Cerasmart 270, Enamic, and SFRC CAD) were fabricated (n = 20/group). All restorations were luted with self-adhesive dual-cure resin cement (G-Cem One). Half of restored teeth per each group (n = 10) were quasi-statically loaded until fracture without aging. The other half underwent cyclic fatigue aging for 500,000 cycles (F = 150 N) before being loaded quasi-statically until fracture. Then, the fracture type was visually inspected. The microstructure and elemental content of CAD/CAM materials were assessed using SEM and EDS. Two-way analysis of variance (ANOVA) was used to statistically examine the data, and it was followed by the Tukey HSD test (α = 0.05). ANOVA demonstrated that both material type and aging had a significant effect (p < 0.05) on the load-bearing capacity values of the restorations. Teeth restored with SFRC CAD showed significantly the highest (p < 0.05) load-bearing capacity (2535 ± 830 N) after fatigue aging among all groups. SEM images showed the ability of short fibers in SFRC CAD composite to redirect and hinder crack propagation. With regard to fracture mode, Enamic group revealed 85% of catastrophic failure (vs. 45% and 10% for Cerasmart 270 and SFRC CAD, respectively). Large MOD cavities on molar teeth were most favorably restored with SFRC CAD inlays, yielding the highest load-bearing capacity and more restorable failures.
Topics: Humans; Inlays; Composite Resins; Dental Stress Analysis; Molar; Computer-Aided Design; Dental Caries; Materials Testing
PubMed: 37097420
DOI: 10.1007/s10266-023-00815-y -
Optometry and Vision Science : Official... May 2023Corneal inlays, one of the treatment options for presbyopia, are effective and safe, and various such devices have been developed. However, there have been cases of...
SIGNIFICANCE
Corneal inlays, one of the treatment options for presbyopia, are effective and safe, and various such devices have been developed. However, there have been cases of inlay removal due to complications or patient dissatisfaction.
PURPOSE
The purpose of this study was to report a case of inlay removal due to corneal opacity after inlay implantation and the results of 5 years of follow-up.
CASE REPORT
A 63-year-old man was referred to our hospital with visual disturbance and double vision in his left eye. Two years before presentation at our hospital, he had undergone bilateral laser in situ keratomileusis with corneal inlay implantation in the left eye at another clinic. Slit-lamp examinations showed paracentral corneal opacity. The patient was treated with tranilast eye drops for 18 months, with no progression of symptoms. However, 6 months after stopping the eye drop treatment, the opacity recurred, and vision acuity decreased, along with the formation of myofibroblasts around the inlay, as revealed by in vivo confocal microscopy. Consequently, the inlay was removed at the previous clinic. During the subsequent 5-year follow-up period, ophthalmic examination revealed reduced corneal opacity, although visual acuity did not change; moreover, no myofibroblast was found.
CONCLUSIONS
Corneal inlays can sometimes cause complications. In this case, the patient experienced corneal fibrosis and associated vision loss. In vivo confocal microscopy detected myofibroblasts that cause corneal stromal fibrosis; thus, the removal was decided to avoid fibrosis progression.
Topics: Male; Humans; Middle Aged; Prosthesis Implantation; Prostheses and Implants; Prospective Studies; Corneal Stroma; Corneal Diseases; Corneal Opacity; Microscopy, Confocal; Fibrosis; Presbyopia
PubMed: 37071088
DOI: 10.1097/OPX.0000000000002018 -
Polymers Mar 2023The aim of this research was to evaluate the mechanical impact of utilizing different fiber-reinforced composite (FRC) systems to reinforce inlay-retained bridges in...
The aim of this research was to evaluate the mechanical impact of utilizing different fiber-reinforced composite (FRC) systems to reinforce inlay-retained bridges in dissected lower molars with different levels of periodontal support. A total of 24 lower first molars and 24 lower second premolars were included in this study. The distal canal of all molars received endodontic treatment. After root canal treatment, the teeth were dissected, and only the distal halves were kept. Standardized class II occluso-distal (OD) (premolars) and mesio-occlusal (MO) (dissected molars) cavities were prepared in all teeth, and premolar-molar units were created. The units were randomly distributed among four groups (n = six/group). With the aid of a transparent silicone index, direct inlay-retained composite bridges were fabricated. In Groups 1 and 2, both discontinuous (everX Flow) and continuous (everStick C&B) fibers were used for reinforcement, while in Groups 3 and 4, only discontinuous fibers (everX Flow) were used. The restored units were embedded in methacrylate resin, simulating either physiological periodontal conditions or furcation involvement. Subsequently, all units underwent fatigue survival testing in a cyclic loading machine until fracture, or a total of 40,000 cycles. Kaplan-Meyer survival analyses were conducted, followed by pairwise log-rank post hoc comparisons. Fracture patterns were evaluated visually and with scanning electron microscopy. In terms of survival, Group 2 performed significantly better than Groups 3 and 4 ( < 0.05), while there was no significant difference between the other groups. In the case of impaired periodontal support, a combination of both continuous and discontinuous short FRC systems increased the fatigue resistance of direct inlay-retained composite bridges compared to bridges that only contained short fibers. Such a difference was not found in the case of sound periodontal support between the two different bridges.
PubMed: 36987124
DOI: 10.3390/polym15061343 -
International Journal of Molecular... Mar 2023The adhesive cementation of ceramic inlays may increase pulpal temperature (PT) and induce pulpal damage due to heat generated by the curing unit and the exothermic...
The adhesive cementation of ceramic inlays may increase pulpal temperature (PT) and induce pulpal damage due to heat generated by the curing unit and the exothermic reaction of the luting agent (LA). The aim was to measure the PT rise during ceramic inlay cementation by testing different combinations of dentin and ceramic thicknesses and LAs. The PT changes were detected using a thermocouple sensor positioned in the pulp chamber of a mandibular molar. Gradual occlusal reduction obtained dentin thicknesses of 2.5, 2.0, 1.5, and 1.0 mm. Light-cured (LC) and dual-cured (DC) adhesive cements and preheated restorative resin-based composite (RBC) were applied to luting of 2.0, 2.5, 3.0, and 3.5 mm lithium disilicate ceramic blocks. Differential scanning calorimetry was used to compare the thermal conductivity of dentin and ceramic slices. Although ceramic reduced heat delivered by the curing unit, the exothermic reaction of the LAs significantly increased it in each investigated combination (5.4-7.9 °C). Temperature changes were predominantly influenced by dentin thickness followed by LA and ceramic thickness. Thermal conductivity of dentin was 24% lower than that of ceramic, and its thermal capacity was 86% higher. Regardless of the ceramic thickness, adhesive inlay cementation can significantly increase the PT, especially when the remaining dentin thickness is <2 mm.
Topics: Composite Resins; Dentin; Inlays; Temperature; Resin Cements; Ceramics; Materials Testing; Dental Bonding
PubMed: 36982546
DOI: 10.3390/ijms24065466 -
Arthroplasty Today Apr 2023Adverse local tissue reaction (ALTR) is a frequently described, although uncommon, complication of metal-on-metal total hip arthroplasty. Here in we report on 2 patients...
Adverse local tissue reaction (ALTR) is a frequently described, although uncommon, complication of metal-on-metal total hip arthroplasty. Here in we report on 2 patients with unique metal-inlay polyethylene liners who suffered from ALTR that required revision arthroplasty. In 2 of 3 cases the femoral trunnion was noted to have minimal corrosion and the stem was salvaged with a titanium adapter. In one case there was catastrophic femoral stem failure and an extended trochanteric osteotomy was required to remove the unique lateral flare stem. The surgeon must pay special attention when scrutinizing radiographs to identify a metal inlay polyethylene liner and when performing revision arthroplasty to prevent greater trochanter fracture in a patient who likely already has compromised abductor function due to ALTR.
PubMed: 36938349
DOI: 10.1016/j.artd.2023.101106 -
Odontology Oct 2023Alveolar ridge augmentation of atrophic posterior mandibular ridge represents a challenge in oral and maxillofacial surgery to restore aesthetic and function. The aim of...
Alveolar ridge augmentation of atrophic posterior mandibular ridge represents a challenge in oral and maxillofacial surgery to restore aesthetic and function. The aim of the study was to compare the clinical and radiographic outcomes of bone formation in atrophic posterior mandibles augmented using onlay symphysis cortico-cancellous bone block with that augmented using sandwich bone augmentation technique (Inlay). Twelve patients were selected with missing mandibular posterior teeth. CBCT were done for all patients preoperatively to assess the residual bone height, ranged between 5 and 7 mm from the inferior alveolar nerve with adequate sufficient alveolar ridge width more than 4 mm. Patients required bone augmentation procedure with autologous onlay chin graft (group I) versus those used as inlay sandwich technique (group II). Clinical and radiographic analysis were done to analyses the newly formed bone and bone height. Percent of change in bone height was also calculated and revealed that group I was higher than group II, however, statistically insignificant differences between the two groups were found regarding the percentage of newly formed bone. Vertical ridge augmentation procedures using onlay chin graft took lesser time than the interpositional grafting with fixation technique, however, both techniques are promising for vertical ridge augmentation.
Topics: Humans; Inlays; Bone Transplantation; Mandible; Dental Implantation, Endosseous; Chin; Alveolar Ridge Augmentation
PubMed: 36853425
DOI: 10.1007/s10266-023-00794-0