-
Cureus May 2024Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and...
Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and upper-lip hypertrophy who underwent surgical orthodontic treatment for correction of a large overjet and deep overbite. In addition to the a large overjet and deep overbite, interdental spacing was observed in both the arches. The mandible was retrognathic and deviated to the right side. No maxillary occlusal canting or temporomandibular joint symptoms were observed. The patient was diagnosed with skeletal maxillary protrusion with spaced dentition and mandibular deviation to the right due to SWS. After presurgical orthodontic treatment using a multibracket appliance, we performed a sagittal split ramus osteotomy (SSRO) alone due to the presence of a hemangioma around the maxilla. No abnormal bleeding or cerebral hemorrhage due to increased blood pressure was observed during the SSRO. Postoperatively, the maxillary and mandibular arches were well-aligned, the deep overbite and excessive overjet improved, and bilateral angle class I molar and canine relationships were established. Furthermore, mandibular deviation improved, and the midlines of both arches approximately coincided with the facial midline. In conclusion, orthognathic surgery is feasible in patients with SWS after carefully evaluating the sites and sizes of the hemangiomas.
PubMed: 38854229
DOI: 10.7759/cureus.59964 -
BMC Oral Health Jun 2024This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
BACKGROUND
This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
METHODS
A stratified cluster sample of 1278 schoolchildren (620 males, 658 females, mean age 12 years and 5 months (± 0.5)) were examined. Candidates who had not received any previous orthodontic treatment were only included. Dental anomalies like missing and ectopic teeth were recorded. The anteroposterior occlusal relationship was assessed based on Angle classification. Overjet and overbite were measured. Crowding and spacing were recorded subjectively. In addition, crossbite, openbite, and midline displacement were recorded. The chi-square test and descriptive analysis were used statistically.
RESULTS
The study found Angle Class I molar relationship in 65%, Class II div 1 in 17%, Class II div 2 in 6%, and Class III in 12% of the sample. An overjet (OJ) of more than 4 mm was present in 17%, and 4% had OJ of more than 6 mm; an OJ of at least 0 mm or less in 36%, and 6% had a reverse OJ. A normal overbite was observed in 53%, while 28% had an increase and 19% had a decreased overbite. An anterior openbite (AOB) was present in 9%, and a scissor bite or anterior crossbite in 6% and 14%, respectively. A posterior crossbite was observed in 12% (9% unilateral and 3% bilateral). Midline displacement was found in (9%). Crowding was observed in 35% and 31% and spacing in 24% and 15% of the maxillary and mandibular arches, respectively. A statistically significant relationship between gender and midline shift, a diastema, spacing in the upper arch, and most dental anomalies was found; males were more affected (p < 0.05).
CONCLUSION
This study reported a high prevalence of malocclusion among schoolchildren in Palestine. A collaborative effort should be directed to obtain more monitoring and surveillance of malocclusion more frequently to prevent and control the exacerbation of the problem.
Topics: Humans; Male; Female; Malocclusion; Child; Prevalence; Overbite; Malocclusion, Angle Class II; Arabs; Malocclusion, Angle Class III; Diastema; Malocclusion, Angle Class I; Middle East; Open Bite; Tooth Eruption, Ectopic; Anodontia; Sex Factors; Adolescent
PubMed: 38849789
DOI: 10.1186/s12903-024-04432-1 -
International Orthodontics May 2024The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign®...
OBJECTIVE
The aim of the present study was to compare the changes in overjet and overbite measurements achieved in adolescent patients following an initial series of Invisalign® aligners (Align Technology, San Jose, California) with those planned by orthodontists via its ClinCheck® digital treatment planning facility.
METHODS
Data provided by Align regarding patients who had completed an initial series of Invisalign® aligner treatment and were less than 18-years old were assessed in relation to pre-treatment, planned and achieved overjet and overbite measurements. Descriptive statistics, Wilcoxon rank-sum, Mann Whitney calculations were computed.
RESULTS
A total of 290 patients satisfied inclusion criteria. The median (interquartile range (IQR)) age was 14.17 (13,15.42) years. The median achieved overjet and overbite changes were less than those planned (p<0.01) with 53.33% of the planned median overjet increase achieved and 52.94% of planned median overjet reduction achieved. Additionally, 58.33% of the planned median overbite increase was achieved and 55.55% of the planned median overbite reduction was achieved. A total of 21.52% patients recorded no change or an increase from pre-treatment to the achieved overjet where reduction was planned, whereas 41.67% recorded no change or a reduction in overjet where increase was planned. A total of 18.72% recorded no change or an increase in overbite where reduction was planned, whereas 20.75% recorded no change or a reduction in overbite where increase was planned.
CONCLUSIONS
Less than 60% of the planned overjet and overbite changes per patient were achieved. Between 18.72 and 41.67% of patients experienced no change or changes in overjet and overbite in the opposite direction to that planned. This is likely to be clinically significant.
PubMed: 38805975
DOI: 10.1016/j.ortho.2024.100888 -
International Journal of Dentistry 2024Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and...
BACKGROUND
Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and treating occlusal problems and their potential consequences on TMD.
OBJECTIVES
To investigate the relationship of occlusal features and some of the TMD parameters. . The current cross-sectional study was conducted on 200 TMD patients seeking dental treatment at different dental centers in Baghdad city, aged 18-35 years. All participants underwent assessment for occlusal features, which were molar and canine classifications, overjet, posterior buccal or lingual crossbites, and overbites, and TMD parameters (muscle pain, TMJ pain, and clicking) using the Chi-square test for statistical analysis.
RESULTS
Regarding molar classification, there were strong positive correlations between subjects with TMD and having different molar classifications (class I, II, and III) bilaterally or unilaterally; furthermore, there were strong positive correlations between subjects with TMD and having different canine classifications. Moreover, there were significant correlations between subjects with increased, normal, or decreased overjet and the TMD parameters. In addition, there were weak positive correlations between TMD occurrence and buccal or lingual posterior crossbite. On the other hand, there were significant correlations between subjects with a decreased overbite and the presence of TMD parameters.
CONCLUSION
TMD had a multifactorial background rather than dependability on a specific molar or canine classification type. There was also a correlation between overjet and TMD muscle pain, while decreased overbite was correlated to muscle and TMJ pain. Conversely, there is no vital correlation between posterior buccal or lingual crossbite occurrence and TMD parameters.
PubMed: 38798761
DOI: 10.1155/2024/8715166 -
Journal of Clinical Medicine May 2024This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The...
This study aimed to investigate the relationship between the Curve of Spee (COS) depth and malocclusion characteristics in a population from Sibiu County, Romania. The research sought to understand how the COS's anatomical dimensions correlate with different classes of malocclusion and the position of the frontal teeth. A total of 265 participants from the Dentistry Ambulatory of the Military Hospital of Sibiu were included in this study. It employed digital intraoral scanning technology to measure the COS, overjet, and overbite, with malocclusion classification. Statistical analyses, including correlation and regression, were conducted to examine the relationships between COS depth, frontal teeth position, and malocclusion characteristics. The average COS depth measured was 1.0564 mm, presenting variability when compared to existing literature. Most of the study participants had Class I malocclusion. A significant positive correlation between COS depth and overjet was identified, with no notable gender-based differences in these occlusal parameters. The findings affirm the integral role of COS in occlusal dynamics and malocclusion diagnosis. The COS measurement of a mean of 1.0564 mm, when compared to other results emphasizes the differences in occlusal curvature among various populations. The results contribute to a refined understanding of occlusal relationships, supporting the need for personalized orthodontic and prosthetic treatments based on precise anatomical measurements.
PubMed: 38792296
DOI: 10.3390/jcm13102750 -
Journal of Clinical Medicine May 2024We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent...
We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.
PubMed: 38792293
DOI: 10.3390/jcm13102753 -
International Journal of Environmental... Apr 2024To assess the association between clinical orthodontic indicators and oral-health-related quality of life, adjusted for socio-demographic factors, focusing on...
OBJECTIVE
To assess the association between clinical orthodontic indicators and oral-health-related quality of life, adjusted for socio-demographic factors, focusing on 16-year-old patients with cleft lip and/or palate (CL/P).
PARTICIPANTS
One hundred and twenty-two patients with CL/P, representing cleft-lip (CL), cleft-palate (CP), unilateral/bilateral cleft-lip-palate (UCLP/BCLP), enrolled in the national CLP-Team, Bergen, Norway.
METHOD
A cross-sectional study by two orthodontists assessing the number of teeth, intermaxillary sagittal relation (ANB-angle), dental arch and occlusion of 16-year-old patients with CL/P. All completed a digital questionnaire including self-reported socio-demographic variables, OHIP-14 questionnaire and dental aesthetics. Cross-tabulations with Pearson's Chi-square test were used to identify associations between self-reported OHRQoL and socio-demographic and clinical indicators. Multiple variable analyses were conducted with binary logistic regression analysis using the odds ratio (OR) and 95% confidence interval (CI) to assess associations between OHRQoL and clinical indicators adjusted for socio-demographic variables. Ethical approval was granted by the regional ethics committee.
RESULTS
Patients with UCLP and BCLP had poorer clinical indicators compared to patients with CL and CP ( < 0.05). A total of 80% of the patients had OHIP-14 > 0. The highest oral impact was reported for psychological domains and articulation and the least for functional domains. Respondents with BCLP and those with poor intermaxillary relationships (ANB < 0°) reported a high impact on OHRQoL ( < 0.05). No statistically significant associations between other clinical indicators and socio-demographic variables such as gender, educational aspiration, and place of residence were reported.
CONCLUSIONS
The study revealed an association between severe cleft diagnosis, missing teeth, misaligned teeth, negative overjet, and poor OHRQoL, but a statistically significant association was found only between OHRQoL and poor intermaxillary sagittal relations (unfavorable profile). To improve OHRQoL among patients with clefts, there is a need for an individual follow-up and prioritization of oral healthcare.
Topics: Humans; Cleft Lip; Cleft Palate; Adolescent; Quality of Life; Male; Female; Norway; Oral Health; Cross-Sectional Studies; Surveys and Questionnaires; Malocclusion
PubMed: 38791765
DOI: 10.3390/ijerph21050550 -
Biomimetics (Basel, Switzerland) May 2024An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical...
An efficient treatment plan using a temporary anchorage device should be built following the principle of reducing the number of tads to obtain a multiple biomechanical advantage. The following case report concerns the Biga system, a strategy that supports orthodontists during class II corrections and vertical control through treatment. A 12-year-old girl with a high angle of skeletal class II was selected. A novel biomechanical strategy was effectively applied using two tads on the upper arch to obtain sequential distalization of the upper teeth and to correct the lower arch spee curve using third-class elastics. Eventually, on the same tads, a double cantilever was applied to control the overbite and intrusion during incisors' retraction. The Biga system is an easy biomechanical strategy that ensures the three-dimensional control of treatment mechanics in class II patients.
PubMed: 38786515
DOI: 10.3390/biomimetics9050305 -
BMC Oral Health May 2024Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its...
BACKGROUND
Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its application to skeletal discrepancy may result in unsatisfactory tooth inclination. This study aimed to construct a novel appliance with overjet design to avoid this side effect and investigated its shape and mechanical changes under occlusion using three-dimensional finite element method.
METHODS
We established three samples of prefabricated myofunctional appliances. The first one was edge to edge without overjet, and the outer shield of both jaws were flattened. The second one was 3 mm overjet with stepped the outer shield. The last one was 3 mm overjet, and the outer shield of both jaws were flatted, which meant the front wall of lower jaw was strengthened with bumper, termed as lower bumper. A complete dentition model was applied to the study. 150 N occlusal force was applied to each type of appliance and the deformation displacement and the changes in stress was recorded.
RESULTS
The deformation was significant in the incisors regions, especially in the vertical and lateral dimensions. The maximum displacements of 3 mm overjet with step shield group were 7.08 mm (vertical), 3.99 mm (lateral), and 2.90 mm (sagittal), while it decreased to 3.92 mm(vertical), 1.94 mm (lateral), and 1.55 mm (sagittal) in overjet with bumper group. Moreover, the upper molar regions exhibited higher vertical and sagittal displacement in 3 mm overjet with step shield group, which were 3.03 mm (vertical) and 1.99 mm (sagittal), and the bumper design could decrease the maximum displacement to 1.72 mm (vertical) and 0.72 mm (sagittal). In addition, the Von Mises stress of appliances was analyzed, and results indicated that 3 mm overjet with step shield generated higher stress than other groups, with the maximum Von Mises stress was 0.9387 MP, which were 0.5858 and 0.5657 MP in edge to edge group and 3 mm overjet with lower bumper group, respectively.
CONCLUSION
The prefabricated myofunctional appliances may cause deformation during occlusion. Compared to step shield group, the application of lower bumper exhibited better resistance to occlusal force.
Topics: Finite Element Analysis; Humans; Orthodontic Appliance Design; Myofunctional Therapy; Bite Force; Imaging, Three-Dimensional; Overbite; Stress, Mechanical; Mandible; Incisor; Biomechanical Phenomena
PubMed: 38745284
DOI: 10.1186/s12903-024-04325-3 -
International Dental Journal May 2024Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of...
INTRODUCTION
Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of failure and cracking of braces should be considered. Therefore, the aim of the present study was to compare the failure rates of ceramic and metal brackets in a 12-month clinical study.
METHODS
Eighty patients undergoing fixed orthodontic treatment with vestibular appliances were enrolled and divided into 2 equal groups: MET for metal brackets and CER for ceramic brackets. After bonding, bracket failures were recorded for 12 months, along with the archwire placed at the time of failure. Angle's dental class, skeletal class, Wits appraisal, Little's irregularity index, overjet, overbite, age, and gender of the patients were recorded from pretreatment cephalometric tracings and study casts. The data were statistically analysed (P < .05).
RESULTS
Significantly higher failure rates were found for ceramic brackets in the overall analysis, in the mandibular arch, and in the posterior region. Regression analysis revealed a significant influence of round nickel-titanium archwires on higher failure rates, whilst a significant influence of rectangular archwires was found on lower failure rates.
CONCLUSIONS
Ceramic brackets showed higher failure rates. Patients should be aware that orthodontic treatment with ceramic brackets may involve delays and inconvenience due to the higher failure rate compared to metal brackets.
PubMed: 38744578
DOI: 10.1016/j.identj.2024.04.023