-
BMC Oral Health May 2024Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its...
BACKGROUND
Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its application to skeletal discrepancy may result in unsatisfactory tooth inclination. This study aimed to construct a novel appliance with overjet design to avoid this side effect and investigated its shape and mechanical changes under occlusion using three-dimensional finite element method.
METHODS
We established three samples of prefabricated myofunctional appliances. The first one was edge to edge without overjet, and the outer shield of both jaws were flattened. The second one was 3 mm overjet with stepped the outer shield. The last one was 3 mm overjet, and the outer shield of both jaws were flatted, which meant the front wall of lower jaw was strengthened with bumper, termed as lower bumper. A complete dentition model was applied to the study. 150 N occlusal force was applied to each type of appliance and the deformation displacement and the changes in stress was recorded.
RESULTS
The deformation was significant in the incisors regions, especially in the vertical and lateral dimensions. The maximum displacements of 3 mm overjet with step shield group were 7.08 mm (vertical), 3.99 mm (lateral), and 2.90 mm (sagittal), while it decreased to 3.92 mm(vertical), 1.94 mm (lateral), and 1.55 mm (sagittal) in overjet with bumper group. Moreover, the upper molar regions exhibited higher vertical and sagittal displacement in 3 mm overjet with step shield group, which were 3.03 mm (vertical) and 1.99 mm (sagittal), and the bumper design could decrease the maximum displacement to 1.72 mm (vertical) and 0.72 mm (sagittal). In addition, the Von Mises stress of appliances was analyzed, and results indicated that 3 mm overjet with step shield generated higher stress than other groups, with the maximum Von Mises stress was 0.9387 MP, which were 0.5858 and 0.5657 MP in edge to edge group and 3 mm overjet with lower bumper group, respectively.
CONCLUSION
The prefabricated myofunctional appliances may cause deformation during occlusion. Compared to step shield group, the application of lower bumper exhibited better resistance to occlusal force.
Topics: Finite Element Analysis; Humans; Orthodontic Appliance Design; Myofunctional Therapy; Bite Force; Imaging, Three-Dimensional; Overbite; Stress, Mechanical; Mandible; Incisor; Biomechanical Phenomena
PubMed: 38745284
DOI: 10.1186/s12903-024-04325-3 -
International Dental Journal May 2024Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of...
INTRODUCTION
Orthodontic treatment with fixed vestibular appliances is still widely used worldwide. When choosing the aesthetic alternative of ceramic brackets, the possibility of failure and cracking of braces should be considered. Therefore, the aim of the present study was to compare the failure rates of ceramic and metal brackets in a 12-month clinical study.
METHODS
Eighty patients undergoing fixed orthodontic treatment with vestibular appliances were enrolled and divided into 2 equal groups: MET for metal brackets and CER for ceramic brackets. After bonding, bracket failures were recorded for 12 months, along with the archwire placed at the time of failure. Angle's dental class, skeletal class, Wits appraisal, Little's irregularity index, overjet, overbite, age, and gender of the patients were recorded from pretreatment cephalometric tracings and study casts. The data were statistically analysed (P < .05).
RESULTS
Significantly higher failure rates were found for ceramic brackets in the overall analysis, in the mandibular arch, and in the posterior region. Regression analysis revealed a significant influence of round nickel-titanium archwires on higher failure rates, whilst a significant influence of rectangular archwires was found on lower failure rates.
CONCLUSIONS
Ceramic brackets showed higher failure rates. Patients should be aware that orthodontic treatment with ceramic brackets may involve delays and inconvenience due to the higher failure rate compared to metal brackets.
PubMed: 38744578
DOI: 10.1016/j.identj.2024.04.023 -
The Saudi Dental Journal Apr 2024The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the...
INTRODUCTION
The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the association between the VSP and various factors including type of birth, gender, tongue posture, lip incompetence, eruption of primary molars, habits and the presence of malocclusions in children with primary and early mixed dentition.
MATERIAL AND METHOD
A total of 219 children (102 boys and 117 girls) were evaluated using a combination of a questionnaire and a structured clinical examination by one pediatric specialist dentist. Kittel's method of tongue posture evaluation and the Payne technique for assessment of swallowing pattern were included in the clinical examination of myofunctional status. After checking for normality, normal and non-normal distributed data were analyzed using two-sample -test and Mann-Whitney test, respectively. Analysis of categorical variables was done using a chi-square test, and Bonferroni correction was used as correction for multiple comparisons.
RESULTS
A total of 56.2 % of the study population had a VSP. The chi-square test indicated a statistically significant higher presence of VSP in male gender. Statistically significant associations were seen between the VSP and lip incompetency, pathologic resting tongue position, habits, anterior open bite and increased overjet. On the other hand, no statistically significant associations were found between VSP and children's age within the sample population, type of birth, uni- or bilateral crossbites, increased overbite, edge-to-edge anterior bite or completion of eruption of primary molars and/or permanent incisors.
CONCLUSIONS
The association between VSP and male gender, pathologic tongue posture, lip incompetency and habits and occlusal traits such as anterior open bite and increased anterior overjet is supported by the results of the present study.
PubMed: 38690392
DOI: 10.1016/j.sdentj.2024.01.001 -
The Saudi Dental Journal Apr 2024This study investigated the prevalence of maxillary labial frenum morphologies and attachment types and their associations with various patient-related clinical...
OBJECTIVE
This study investigated the prevalence of maxillary labial frenum morphologies and attachment types and their associations with various patient-related clinical variables in a population of Saudi Arabian adults.
METHODS
This study comprehensively examined 100 participants of both genders to categorize frenum types and attachment sites. The following clinical variables were recorded: probing depth, clinical attachment loss, attached gingiva width, overjet, overbite, diastema width, central incisor condition, occlusion, previous orthodontic treatment, and the incidence of gummy smile.
RESULTS
The mean age was 32.6 years, and the average diastema width was 0.23 mm. The study found that the simple frenum type was the most common morphology (57 %), and gingival attachment was the most frequent attachment type (54 %). Simple frenum was significantly associated with class I occlusion (p = 0.018), and frenum with nichum was significantly associated with class II occlusion (p = 0.019). Females were more likely to exhibit simple frenum with nodule frenum than males (p = 0.042). Mucosal frenum attachment was significantly correlated with the absence of previous orthodontic treatment (p = 0.042).
CONCLUSION
The study identified a relationship between the features of the maxillary labial frenum and occlusion as well as previous orthodontic treatment. Our findings suggest that understanding each patient's unique frenum features can lead to more effective and personalized dental care, thus improving patient satisfaction.
PubMed: 38690391
DOI: 10.1016/j.sdentj.2024.02.002 -
Head & Face Medicine Apr 2024The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with... (Comparative Study)
Comparative Study
BACKGROUND
The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA).
METHODS
Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A).
RESULTS
A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws.
CONCLUSIONS
CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.
Topics: Humans; Malocclusion, Angle Class II; Female; Male; Adult; Treatment Outcome; Bone Screws; Young Adult; Tooth Movement Techniques; Maxilla; Orthodontic Anchorage Procedures; Retrospective Studies; Orthodontic Appliance Design
PubMed: 38671525
DOI: 10.1186/s13005-024-00425-1 -
Dentistry Journal Apr 2024Atypical swallowing has a high incidence in growing subjects. Orthopedic treatment with orthodontic appliances and speech therapy are the main approaches to this...
Atypical swallowing has a high incidence in growing subjects. Orthopedic treatment with orthodontic appliances and speech therapy are the main approaches to this problem. The aim of this prospective study was to evaluate the changes in the dental arches induced by one year of treatment with the Froggy Mouth myofunctional appliance designed to correct atypical swallowing. In total, 16 patients with atypical swallowing were instructed to use the Froggy Mouth appliance. A digital intraoral impression was taken at baseline (T0). The Froggy Mouth appliance had to be used for 15 min/day throughout the treatment period. At the end of the first year of treatment (T1), another impression was taken with the same intraoral scanner. Digital casts of the T0 and T1 impressions were obtained using software and the two casts were superimposed to record the following measurements: upper intercanine distance, upper arch diameter, upper arch width, overbite and overjet. The data were statistically analyzed (significance threshold: < 0.05). Student's t-test was used to compare pre- and post-treatment measurements. Linear regressions were performed to assess the influence of arch width on anterior and posterior diameters. A significant increase was found for the upper arch diameters ( < 0.05), whereas no statistically significant difference was found for the incisor relationship (overjet/overbite) ( > 0.05). To date, the efficacy of this appliance has not been extensively studied. According to the present prospective study, the Froggy Mouth protocol could be a valuable method as a myofunctional therapy for atypical swallowing, but further studies are needed to confirm these preliminary results.
PubMed: 38668008
DOI: 10.3390/dj12040096 -
European Journal of Orthodontics Jun 2024The most common treatment approaches for patients missing maxillary lateral incisors are implant replacement (IT) and orthodontic space closure (SC). Treatment...
INTRODUCTION
The most common treatment approaches for patients missing maxillary lateral incisors are implant replacement (IT) and orthodontic space closure (SC). Treatment techniques change and improve over time, and it is of interest to know if improvements differ between the methods.
AIM
To compare the aesthetic outcome and other clinical findings in patients with one or two missing maxillary lateral incisors who were treated with a 10-year difference in time, with either orthodontic space closure or implant replacement.
MATERIAL AND METHODS
A total of 88 patients were included in the study. Forty-four patients treated between 2011 and 2018 were included as the latter cohort (LC). The LC was compared to the early cohort (EC; n = 44), treated between 2001 and 2008. A total of 132 teeth was analysed: 62 teeth in the EC (28 teeth in IT cases and 34 teeth in SC cases) and 70 teeth in the LC (34 teeth in IT cases and 36 teeth in SC cases). Long-term clinical and aesthetic outcomes were evaluated.
RESULTS
An improvement over time was found in crown length, BoP, papilla, the inclination of incisors, and overall appearance in IT cases and in crown colour and overbite in SC cases. A deterioration over time was found in crown length and BoP among the SC cases.
CONCLUSION
Among the IT cases, an improvement in outcomes was noted over time. When comparing SC cases the colour of the crown and overbite had improved, while crown length and BoP had deteriorated over time.
Topics: Humans; Esthetics, Dental; Incisor; Female; Male; Orthodontic Space Closure; Maxilla; Anodontia; Time Factors; Adult; Adolescent; Treatment Outcome; Retrospective Studies; Young Adult
PubMed: 38656537
DOI: 10.1093/ejo/cjae018 -
BMC Oral Health Apr 2024Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable...
BACKGROUND
Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three‑dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD.
METHODS
This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses.
RESULTS
For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too.
CONCLUSIONS
SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.
Topics: Male; Adult; Female; Humans; Adolescent; Young Adult; Maxilla; Retrospective Studies; Splints; Cephalometry; Mandible; Overbite; Malocclusion, Angle Class II; Temporomandibular Joint Disorders; Temporomandibular Joint
PubMed: 38643111
DOI: 10.1186/s12903-024-04260-3 -
The Angle Orthodontist May 2024To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition.
OBJECTIVES
To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition.
MATERIALS AND METHODS
The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05).
RESULTS
In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group.
CONCLUSIONS
The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.
Topics: Male; Female; Humans; Child; Malocclusion, Angle Class III; Malocclusion; Mandible; Overbite; Maxilla; Cephalometry; Malocclusion, Angle Class II
PubMed: 38639459
DOI: 10.2319/071223-488 -
Case Reports in Dentistry 2024A 26-year-old woman had a masticatory dysfunction, straight profile, retrognathic maxilla and mandible, and Angle's class I with a tendency to class III malocclusion on...
A 26-year-old woman had a masticatory dysfunction, straight profile, retrognathic maxilla and mandible, and Angle's class I with a tendency to class III malocclusion on both sides, with bilateral posterior crossbites and a 4 mm anterior open bite. Orthognathic surgery and orthodontic camouflage with and without tooth extraction were considered as treatment options. The patient's preferred method of treatment was orthodontic camouflage without extraction. The transpalatal arch had been placed for the bilateral molars' derotation. After 3 months, the upper segmented fixed appliance was implanted to address the posterior crossbites in the premolar's region. One mini-implant was inserted into the anterior palatum after the transpalatal arch was removed, and a supporting device was attached to the first permanent molars to give indirect skeletal stability. Orthodontic treatment's active phase lasted 23 months, and all treatment objectives were achieved during that time: the desired facial profile, adequate occlusion, appropriate overbite, and overjet.
PubMed: 38623492
DOI: 10.1155/2024/7768109