-
Journal of Maxillofacial and Oral... Jun 2024Maxillary reconstruction is often a challenging task for the surgeons because of the complex anatomy. However, with the advances in virtual surgical planning (VSP) and...
INTRODUCTION
Maxillary reconstruction is often a challenging task for the surgeons because of the complex anatomy. However, with the advances in virtual surgical planning (VSP) and 3D printing technology there is a new avenue for the surgeons which offers a suitable alternative to conventional flap-based reconstructions.
PATIENTS AND METHODS
In this article, we have described 4 case scenarios which were managed with the help of VSP and additive manufacturing technology for complex maxillary reconstruction procedures. Use of the technologies aided the clinician in achieving optimal outcomes with regards to form, function and esthetics.
DISCUSSION
Virtual surgical planning (VSP) has gained a lot of impetus in past 1 decade. These aides the surgeon in determining the extent of disease and also carry out the treatment planning. In addition to VSP, the concept of additive manufacturing provides a viable alternative to the conventional reconstruction modalities for maxillary defect rehabilitation. Increased accuracy, rehabilitation of normal anatomical configuration, appropriate dental rehabilitation, decreased intra-operative time and post-operative complications are some of the advantages. In addition, patient-specific implants eliminate the need for a separate donor site. Apart from the treatment of pathologies, they also can be used for reconstruction of post-traumatic defect, where endosteal implant placement is not possible.
CONCLUSION
These modalities show promising results for reconstruction of complex maxillary defects.
PubMed: 38911428
DOI: 10.1007/s12663-023-02005-3 -
Iranian Journal of Basic Medical... 2024This study aimed to investigate the impact of bioactive plant extracts on the proliferation and migration of dental pulp stem cells (DPSCs) and their potential...
OBJECTIVES
This study aimed to investigate the impact of bioactive plant extracts on the proliferation and migration of dental pulp stem cells (DPSCs) and their potential implications for dental care, focusing on the nurse-caring aspect.
MATERIALS AND METHODS
TDPSCs were cultured on gelatin polymer scaffolds mimicking the extracellular matrix (ECM) environment. Bioactive plant extracts with antibacterial, anti-inflammatory, and anti-oxidant properties were incorporated into the gelatin polymer at concentrations ranging from 0.1% to 2.0%. Proliferation and migration assays were performed, considering nurse-caring practices during the experiments.
RESULTS
Treatment with specific bioactive plant extracts significantly enhanced DPSC proliferation, showing a 2.5-fold increase compared to the control groups. The migration assay revealed a substantial increase in cell migration distance, with treated cells covering an average distance of 400-500 μm compared to 220-260 μm in the control group. Treated cells also exhibited improved viability and metabolic activity, with a 30% increase in cell viability and a 10-20% increase in metabolic activity compared to the control group.
CONCLUSION
This study demonstrates that bioactive plant extracts have the potential to enhance DPSC proliferation, migration, viability, and metabolic activity. These findings support the use of these extracts in dental care, benefiting from the nurse-caring practices.
PubMed: 38911239
DOI: 10.22038/IJBMS.2024.76467.16548 -
Journal of Alzheimer's Disease Reports 2024As infrequent social interaction is a potential risk of dementia, oral malodor may increase the risk of dementia, including Alzheimer's disease.
BACKGROUND
As infrequent social interaction is a potential risk of dementia, oral malodor may increase the risk of dementia, including Alzheimer's disease.
OBJECTIVE
This study investigated the association between malodor and dementia.
METHODS
We used the Japan Public Health Center-based Prospective Study data obtained at Yokote City. A total of 1,493 individuals aged 56 to 75 years underwent a dental examination and self-reported survey from May 2005 to January 2006. Follow-up for the onset of dementia was conducted using long-term care insurance data from 2006 to 2016. Hazard ratios of oral malodor on dementia were estimated by the Cox proportional hazards model. The inverse probability-weighted Cox model was used as a sensitivity analysis.
RESULTS
The study comprised 1493 participants (53.6% women) with a mean age of 65.6 (SD = 5.8) years old; at the end of the follow-up, 6.4% ( = 96) developed dementia, and the percentage was 20.7 in severe malodor group. Throughout 15274.133 person-years of follow-up, the average incidence rate for the onset of dementia per 1000 person-years was 6.29. The highest incidence rate was seen in participants with severe malodor (22.4 per 1000 person-years). After adjusting for confounders, compared to those with no malodor, there was a 3.8 (95% confidence interval: 1.5 to 9.4) times greater hazard of developing dementia in participants with severe malodor. The inverse probability weighted Cox model confirmed the same trend with an adjusted marginal hazard ratio of 4.4 (1.2 to 16.4).
CONCLUSIONS
A significant association between oral malodor and the onset of dementia exists.
PubMed: 38910945
DOI: 10.3233/ADR-240015 -
Cureus May 2024Current guidelines recommend shifting physician-led care (PLC) for type 2 diabetes mellitus (T2DM) to more effective multidisciplinary health care (MHC). However, few...
BACKGROUND
Current guidelines recommend shifting physician-led care (PLC) for type 2 diabetes mellitus (T2DM) to more effective multidisciplinary health care (MHC). However, few researchers have studied its real-life implementation in Saudi Arabia. Therefore, we aimed to assess the implementation and compare the outcomes of an MDC diabetes management program (DMP) among T2DM patients to a PLC at a general hospital after one year of follow-up in a real-world practice setting.
METHODS
We conducted this comparative patient files review study by analyzing medical records of all T2DM patients at two private care centers. Both were compared for their effectiveness in achieving two outcomes: the glycated hemoglobin (HbA1c) <7% and low-density lipoprotein-cholesterol (LDL-c) <70 mg/dl at the end of the first year. Additionally, we assessed the implementation of the DMP.
RESULTS
Eight hundred thirty-four medical records were reviewed, 537 from DMP, and 279 from the PLC center. The personal health coordination was almost complete (97.8%) in the DMP, but the implementation was incomplete regarding nutrition (65.7%), dental exam (64.8%), and foot care (58.3%). Both care groups were matched for age (p = 0.056), gender (p = 0.085), duration of diabetes (p = 0.217), and basal glycemic control (p = 0.171). The DMP showed a significant net decrease in HbA1c (-0.5 [IQR 1.47%] vs -0.2 [IQR 3.05%], p = 0.0001) and LDL-c (-10 [IQR 50] vs -5 [IQR 60.5] mg/dl, p = 0.004) compared to PLC. A higher percentage of patients achieved glycemic control in the DMP than in the PLC (49.4% vs 38.7%, p = 0.038). However, both programs demonstrated similar outcomes in lipid control (28.7% vs. 30%, p = 0.695).
CONCLUSION
Despite some gaps in implementation, one year of DMP showed better glycemic control among T2DM patients compared to PLC. Both programs were comparable in terms of lipid control. Further studies identifying the gaps in care implementation could improve sustainability, future replication, and generalizability of similar programs to other healthcare systems in Saudi Arabia.
PubMed: 38910761
DOI: 10.7759/cureus.60979 -
Cureus May 2024In orthodontics, shear bond strength plays an important role because it provides a good bond between the brackets and tooth surface; it avoids fracture of the tooth...
INTRODUCTION
In orthodontics, shear bond strength plays an important role because it provides a good bond between the brackets and tooth surface; it avoids fracture of the tooth surface and prevents debonding of brackets from the tooth surface. All of these allow sufficient treatment time. Many factors, including the adhesive, its thickness, its strength, the bonding procedure, the clinician's ability, the base design, the geometry of the bracket, the material, and the kind of bracket all contribute to the shear bond strength. Brackets joined using conventional adhesive and adhesive pre-coated (APC) flash-free glue were the subjects of this comparison and evaluation research, which aimed to measure shear bond strength, enamel microfracture, and adhesive residual index.
METHOD
60 recently removed premolars from humans were used in this investigation. Before mounting on the acrylic block, the teeth were meticulously cleaned and preserved in artificial saliva. Two groups were formed from the collected premolars the control group and the experimental group. For the control group, we used American Orthodontics (AO) Master/Mini Master series brackets glued with resin composite kits. To make sure the adhesive was uniformly thick, we flashed extra adhesive around the brackets. In the meantime, samples were bonded using 3M Unitek APC flash-free technology in the experimental group.
RESULTS
The research indicated that there was a statistically significant difference between the two groups to the adhesive remnant index (ARI) and mean shear bond strength. The shear bond strength of the experimental group averaged 10.96 megapascals (MPa), whereas the control group's was 5.70 MPa. The control group's ARI score was 2.97, whereas the experimental group's score was 2.4. There was no statistically significant change seen in enamel microfracture.
CONCLUSION
A more robust shear bond may be possible using APC flash-free brackets. Compared to conventional bonding techniques and brackets, APC flash-free brackets have a lower adhesive residual index. The APC flash-free bracket technology also causes more enamel microfracture than conventional bonding and bracketing methods.
PubMed: 38910749
DOI: 10.7759/cureus.60928 -
Cureus May 2024Management of open apex cases in endodontics poses a significant challenge, especially in immature teeth with necrotic pulps. Traditional apexification techniques have...
Advanced Management of Open Apex Utilizing Platelet-Rich Fibrin and Bone Graft As Apical Barriers With Mineral Trioxide Aggregate (MTA) Obturation: A Detailed Case Report.
Management of open apex cases in endodontics poses a significant challenge, especially in immature teeth with necrotic pulps. Traditional apexification techniques have been the mainstay of treatment, aiming to induce the formation of a calcific barrier at the root apex. However, newer approaches incorporating biological materials such as platelet-rich fibrin (PRF) and demineralized bone matrix (DMBM) have emerged as promising alternatives. This article presents a case report of an 18-year-old male patient who presented with fractured upper central incisors, with the upper right central incisor displaying an open apex due to trauma sustained eight years prior. The treatment plan involved apexification using a combination of DMBM and PRF, with mineral trioxide aggregate (MTA) utilized as an apical barrier. The procedure was performed under rubber dam isolation, meticulously removing necrotic pulp tissue, irrigating with sodium hypochlorite solution, and placing a calcium hydroxide medicament. Subsequent visits included the placement of DMBM and PRF mixture into the canal space to create an apical barrier, followed by MTA placement and final restoration. Follow-up examinations at 3 and 12 months revealed the tooth to be asymptomatic and functionally normal, with radiographic evidence of osseous repair and complete apical closure. This case underscores the efficacy of a multimodal approach utilizing DMBM, PRF, and MTA in successfully managing open apex cases. Further research and long-term follow-up studies are warranted to validate this treatment modality's predictability and long-term success.
PubMed: 38910660
DOI: 10.7759/cureus.60883 -
F1000Research 2024This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite...
BACKGROUND
This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite based restorative material. Assessing different surface treatments provide insights in optimizing repair procedure that enables durability of the restoration, thus potentially benefitting clinical outcomes.
METHODS
A total of 48 alkasite based restorative material blocks, measuring 4 mm in depth and 4 mm in diameter, were prepared. The samples were randomly divided into 8 groups (n = 6) according to the surface treatment done. Group I: Surface preparation by bur; Group II: Surface treatment by laser; Group III: Application of 2-step etch and rinse adhesive (Adper Single Bond 2 adhesive),Group IV: Application of single step self-etch adhesive (Scotchbond Universal adhesive); Group V: Bur preparation followed by application of 2-step etch and rinse adhesive; Group VI: Bur preparation followed by application of single step self-etch adhesive; Group VII: Laser preparation followed by application of 2-step etch and rinse adhesive; and Group VIII: Laser preparation followed by application of single step self-etch adhesive. Post-surface preparation, all the specimens were restored with newly mixed alkasite material. Repair bond strength measurements were assessed with universal testing machine. Shapiro-Wilk and Levene's tests were used to check normality and Homogeneity of variance. ANOVA with post-hoc Games-Howell test and two-way ANOVA with post-hoc Bonferroni test was performed to evaluate the influence of surface preparation on the repair bond strength.
RESULTS
Using a 2-step etch and rinse adhesive resulted in a higher repair bond strength (26.05±2.12) compared to other surface treatments. In contrast, roughening of the surface with burs led to lowest repair bond strength (17.06±3.29) (P=0.02).
CONCLUSION
Application of 2-step etch and rinse adhesive to the existing alkasite based restorative material provides superior bonding with the newly added alkasite based restorative material.
Topics: Surface Properties; Dental Bonding; Shear Strength; Dental Materials; Materials Testing; Humans; Dental Restoration, Permanent
PubMed: 38910590
DOI: 10.12688/f1000research.148326.2 -
BMC Oral Health Jun 2024Isaacs' syndrome, also known as neuromyotonia or peripheral nerve hyperexcitability, is a rare disorder that affects the peripheral nervous system. Clinical findings...
BACKGROUND
Isaacs' syndrome, also known as neuromyotonia or peripheral nerve hyperexcitability, is a rare disorder that affects the peripheral nervous system. Clinical findings include cramps, fasciculations, and myokymia; however, there are few reports of dental treatment for trismus.
CASE PRESENTATION
A patient with trismus due to Isaacs' syndrome experienced swelling and pain in the gingiva surrounding his right lower first molar. He was diagnosed with chronic apical periodontitis by a dentist near his home. However, the patient was informed that dental treatment and medication could not be administered because of the presence of Isaacs' syndrome, and he visited the Geriatric Dentistry and Perioperative Oral Care Center at Kyushu University Hospital 2 weeks later. The patient's painless mouth-opening distance (between incisors) was 20 mm at that time, and medication, including amoxicillin capsules and acetaminophen, was administered because the dental extraction forceps or endodontic instruments were difficult to insert into the oral cavity for treatment. Two months after his initial visit, the patient visited us complaining of pain in the same area. However, he had recently undergone plasmapheresis treatment in neurology to alleviate limited mouth opening and systemic myalgia, resulting in a pain-free mouth-opening distance of approximately 35 mm. During this temporary period in which he had no restriction in mouth opening, we performed tooth extraction and bridge restoration on the mandibular right first molar and created an oral appliance for sleep bruxism.
CONCLUSIONS
Plasmapheresis therapy transiently reduced trismus, rendering dental interventions feasible, albeit temporarily. This case report underscores the importance of close collaboration between neurologists and dentists who encounter similar cases while furnishing valuable insights to inform dental treatment planning.
Topics: Humans; Male; Trismus
PubMed: 38909199
DOI: 10.1186/s12903-024-04485-2 -
Asian Nursing Research Jun 2024To investigate the effects of honey-based oral care on the oral health of patients with stroke undergoing rehabilitation.
PURPOSE
To investigate the effects of honey-based oral care on the oral health of patients with stroke undergoing rehabilitation.
METHODS
In this randomized controlled trial, 44 stroke patients from a tertiary hospital's rehabilitation ward were assigned to receive either honey-based oral care or normal saline, with treatments administered twice daily for 2 weeks. The study, conducted from November 2021 to July 2022, employed a double-blind method, blinding both participants and evaluators to treatment allocations. Key outcomes measured included oral status, dental plaque index (DPI), and xerostomia. The final analysis included 13 patients in the experimental group and 16 in the control group.
RESULTS
The intervention significantly changed the oral status, DPI, and xerostomia between the groups. The experimental group showed significantly improved oral status (Z = -4.63, p=.001), DPI (Z = -4.58, p<.001), and xerostomia (t = -6.33, p<.001) compared to the control group. The experimental group showed significant improvements in oral status (Z=-3.27, p<.001), DPI (Z=-3.19, p=.001), and xerostomia (t=7.37, p<.001) after the intervention, confirming the efficacy of honey-based oral care.
CONCLUSIONS
Honey-based oral care effectively improves oral status and xerostomia, and reduces DPI in patients with stroke.
CLINICAL TRIAL REGISTRATION NUMBER
Trial registration. Clinical Research Information Service (CRIS), KCT0008201. Registered on 04 February 2023. The first patient was enrolled on November 16, 2021, at https://cris.nih.go.kr/cris/search/listDetail.do?searchWord=KCT0008201&search_yn=Y.
PubMed: 38908430
DOI: 10.1016/j.anr.2024.06.001 -
Medicina Oral, Patologia Oral Y Cirugia... Jul 2024Glass ionomers may be a good alternative to composite resin restorations in special needs patients with challenging behaviours. The present study was carried out to... (Randomized Controlled Trial)
Randomized Controlled Trial
BACKGROUND
Glass ionomers may be a good alternative to composite resin restorations in special needs patients with challenging behaviours. The present study was carried out to evaluate the restorative efficacy of glass ionomer in the occlusal cavities of permanent molars among patients with special needs after one year of follow-up.
MATERIAL AND METHODS
A randomized split-mouth study was made of a cohort of patients with special needs. First and second permanent molars with occlusal caries were treated with glass ionomer, silver amalgam and composite resin. Assessments were made at 3, 6 and 12 months, using a scale based on the original code of Ryge and the USPHS criteria.
RESULTS
A total of 34 patients and 102 restorations comprised the study sample. The survival rate of both the glass ionomer and silver amalgam was 100%, versus 97.1% in the case of composite resin. The glass ionomer afforded good marginal adaptation and stable color, with no fractures or secondary caries.
CONCLUSIONS
The glass ionomer remained successfully for one year in the occlusal cavities of the permanent molars, with the same survival rate as silver amalgam, and better survival than composite resin, in the patients with special needs.
Topics: Humans; Male; Female; Dental Restoration, Permanent; Adult; Glass Ionomer Cements; Young Adult; Dental Caries; Dental Care for Disabled; Middle Aged; Dental Amalgam; Adolescent; Composite Resins; Acrylic Resins; Silicon Dioxide
PubMed: 38907639
DOI: 10.4317/medoral.26537