-
BMC Oral Health Jun 2024A pulp stone is a calcified mass that develops in the dental pulp of any tooth. Despite many studies examining the relationship between pulp stone formation and non-oral...
BACKGROUND
A pulp stone is a calcified mass that develops in the dental pulp of any tooth. Despite many studies examining the relationship between pulp stone formation and non-oral factors, the methods used in these studies have been unable to explain the exact role of these factors alone as distinct from probable effects within the oral cavity environment. Considering that totally unerupted (impacted or developing) teeth are unexposed to the oral cavity's environmental and functional conditions, they provide a more suitable material for studying the effects of these non-oral factors on pulp stone formation. This research study aimed to investigate pulp stones in unerupted teeth and the associated factors in a Saudi subpopulation.
METHODS
The study included 644 cone-beam computed tomography images, with 496 (50.9%) maxillary and 479 (49.1%) mandibular teeth. Of the investigated patients, 293 (45.5%) were men, and 351 (54.5%) were women. The age range was 15-76 years. A chi-square test was used to investigate the associations between pulp stones and age, gender, and history of systemic disease and chronic medication use.
RESULTS
Pulp stones in unerupted teeth were present in 24.2% of the examined dental jaws and 18.6% of the examined teeth. There was no statistically significant relationship between pulp stones and gender (p > 0.05). A significantly greater percentage of pulp stones were found with increasing age (p = 0.000). Additionally, a significantly increased number of pulp stones was observed in patients with systemic diseases and chronic medications (p < 0.05).
CONCLUSIONS
The results support the idea that pulp stones can be present in any type of unerupted tooth. This study provides additional evidence of the increased incidence of pulp stones with age, systemic disease, and chronic medications.
Topics: Humans; Cone-Beam Computed Tomography; Female; Adult; Male; Retrospective Studies; Adolescent; Middle Aged; Dental Pulp Calcification; Young Adult; Aged; Tooth, Unerupted; Saudi Arabia; Age Factors
PubMed: 38907221
DOI: 10.1186/s12903-024-04503-3 -
Frontiers in Public Health 2024Limited attention has been given to oral health challenges faced by older Indigenous populations, especially in rural settings, where disparities exist. This study aims...
BACKGROUND
Limited attention has been given to oral health challenges faced by older Indigenous populations, especially in rural settings, where disparities exist. This study aims to assess oral health in a rural Mapuche community in southern Chile, utilizing geriatric technology support, and exploring the connection between geriatric health and oral well-being to fill a gap in this context.
METHODS
A cross-sectional study was conducted involving 76 independent older adults from a rural Mapuche community who required dental care. Assessments were in a remote care setting gathering extensive data including comprehensive geriatric assessments, medical and dental conditions using a geriatric teledentistry platform (TEGO). Statistical analysis involved descriptive analysis, logistic regression, and both multiple correspondence analysis and k-means cluster analysis.
RESULTS
The sample comprised individuals with limited formal education and a high degree of vulnerability. Geriatric assessments unveiled cognitive deterioration, frailty, depression risk, and multimorbidity. A distribution of the DMFT index, number of remaining teeth, number of occluding pairs, number of teeth with restorative needs and other relevant clinical findings was conducted based on sociodemographic, and medical-geriatric-dental characteristics, and additionally, a Multinomial Logistic Regression Analysis of Dentition Variables in Relation to Geriatric Assessments was performed. The dental burden was substantial, with an average DMFT index of 25.96 (SD 4.38), high prevalence of non-functional dentition (89.3%), periodontal disease (83%), xerostomia (63.2%) and oral mucosal lesions (31.5%). Age, lower education, depression, daily medication number and sugary consumption frequency were associated with a decreased average number of teeth ( < 0.05). Multiple correspondence analysis and k-means cluster analysis identified 4 clusters, with the edentulous and functional dentition groups being the most distinct.
CONCLUSION
This study uncovers a substantial dental burden and intricate medical-geriatric conditions interlinked among Indigenous older adults in a rural Chilean Mapuche community. The implementation of a geriatric technological ecosystem in the community enabled the resolution of less complex oral health issues and facilitated remote consultations with specialists, reducing the necessity for travel to health centers. This underscores the need for innovative dental public health initiatives to address health disparities and improve the overall well-being of older Indigenous adults.
Topics: Humans; Chile; Aged; Female; Male; Cross-Sectional Studies; Oral Health; Rural Population; Geriatric Assessment; Aged, 80 and over; Telemedicine
PubMed: 38903581
DOI: 10.3389/fpubh.2024.1356622 -
Unravelling the Complexities of Bite Force Determinants in Paediatric Patients: A Literature Review.Cureus May 2024The amount of maximum voluntary bite force (MVBF) is determined by the combined action of the jaw elevator muscles, which are altered jaw biomechanics and reflex... (Review)
Review
The amount of maximum voluntary bite force (MVBF) is determined by the combined action of the jaw elevator muscles, which are altered jaw biomechanics and reflex processes. Bite force (BF) measurements can yield valuable information on the activity and function of the jaw muscles. The accuracy of biting force measurements depends on several variables, including age, gender, malocclusion, dental caries, dental prostheses and temporomandibular joint (TMJ). This information is essential for evaluating the development and function of the masticatory system, identifying potential abnormalities or impairments and guiding appropriate treatment interventions for paediatric patients. The aim of this article is to review the literature on the factors affecting bite force and the importance of these factors in assessing dental development and guiding interventions for paediatric patients with bite force-related issues. Additionally, establishing normative values for bite force in different age groups can aid in monitoring growth and detecting any deviations from expected patterns. Measuring bite force in paediatric patients is significant in comprehensive oral health assessment and management.
PubMed: 38903313
DOI: 10.7759/cureus.60630 -
Frontiers in Bioengineering and... 2024Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported...
BACKGROUND
Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported by robust evidence on the underlying biomechanics. This study aimed to investigate the biomechanical effects of overtreatment strategies involving different maxillary anterior teeth intrusion patterns during anterior teeth retraction by CAT in extraction cases.
MATERIALS AND METHODS
A finite element model of the maxillary dentition with the first premolar extracted was constructed. A loading method of clear aligners (CAs) based on the initial state field was proposed. The iterative method was used to simulate the long-term orthodontic tooth movement under the mechanical load exerted by the CAs. Three groups of CAs were utilized for anterior teeth retraction (G0: control group; G1: incisors intrusion group; G2: anterior teeth intrusion group). Tooth displacement and occlusal plane rotation tendency were analyzed.
RESULTS
In G0, CAT caused lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, mesial tipping, and intrusion of the posterior teeth. In G1, the incisors showed minimal extrusion, whereas the canines showed increased extrusion and distal tipping tendency. G2 showed the smallest degree of posterior occlusal plane angle rotation, while the inclination tendency of the canines and second premolars decreased.
CONCLUSION
1. In CAT, tooth displacement tendency may change with increased wear time. 2. During anterior teeth retraction, the incisor intrusion pattern can provide effective vertical control for the lateral incisors but has little effect on the central incisors. Anterior teeth intrusion patterns can alleviate the inclination of canines and second premolars, resulting in partial relief of the roller-coaster effect.
PubMed: 38903188
DOI: 10.3389/fbioe.2024.1388876 -
BMC Oral Health Jun 2024Failure of orthodontic bracket bonds is a common occurrence during orthodontic treatment. This study investigated the impact of Er: YAG laser-based removal of adhesive... (Comparative Study)
Comparative Study
BACKGROUND
Failure of orthodontic bracket bonds is a common occurrence during orthodontic treatment. This study investigated the impact of Er: YAG laser-based removal of adhesive from the bases of metal and ceramic brackets for re-bonding.
METHODS
A total of 168 extracted premolars were collected from patients. 84 metal brackets were used to be bonded on the buccal surface of the premolars in Groups 1, 2, 3 and 4, while 84 ceramic brackets were applied in Groups I, II, III and IV. Group 1/I represented the initial bonding group, with Group 2/II being the re-bonding group with new brackets, while Groups 3/III and 4/ IV received recycled brackets treated by Er: YAG laser or flaming respectively. Both the first and second de-bonding were performed in all samples using a universal testing machine to determine the shear bond strength (SBS). The adhesive remnant index (ARI) was evaluated using a stereo-microscope. The new and the treated bracket bases were evaluated using scanning electron microscopy (SEM). Differences in initial bonding and re-bonding ability were analyzed through one-way ANOVAs, and differences in ARI were assessed with the Kruskal-Wallis test.
RESULTS
Greater amounts of adhesive residue were observed on ceramic brackets treated by laser. The SBS values for recycled metal brackets in Group 3 (26.13 MPa) were comparable to Group 1 (23.62 MPa) whereas they differed significantly from Group 4 (12.54 MPa). No significant differences in these values were observed when comparing the 4 groups with ceramic brackets. ARI score in Group 4 (2-3 points) differed significantly from the three other groups (P < 0.05). For Group I, II, III and IV, similar ARI scores were observed (P > 0.05). SEM analysis didn't show apparent damage of bracket bases consisting of either metal or ceramic material treated by Er: YAG laser.
CONCLUSIONS
Er: YAG laser treatment was superior to flame treatment as a means of removing adhesive without damaging the brackets. SBS values and ARI scores following Er: YAG laser treatment were similar to those for new brackets, offering further support for Er: YAG laser treatment as a viable means of recycling debonded brackets.
Topics: Orthodontic Brackets; Lasers, Solid-State; Humans; Dental Bonding; Ceramics; Dental Debonding; Shear Strength; Dental Stress Analysis; Microscopy, Electron, Scanning; Materials Testing; Surface Properties; Bicuspid; Dental Alloys; Resin Cements
PubMed: 38902669
DOI: 10.1186/s12903-024-04504-2 -
BMC Pediatrics Jun 2024Cherubism is known as a very rare autosomal dominant familial disorder of childhood caused by a mutation in the SH3BP2 gene on 4p16.3. It has not yet been observed at...
BACKGROUND
Cherubism is known as a very rare autosomal dominant familial disorder of childhood caused by a mutation in the SH3BP2 gene on 4p16.3. It has not yet been observed at birth and is usually diagnosed in children aged 2-7. Here, we present a non-hereditary case of cherubism at a very early age.
CASE PRESENTATION
A 6-month-old girl presented with bilateral progressive jaw enlargement. On physical examination, bilateral asymmetrical jaw enlargement, predominantly on the left side, and some enlarged, non-tender, mobile submandibular lymph nodes were detected. No other abnormality was observed. Further investigations with radiology suggested cherubism and Burkitt's lymphoma as differential diagnoses. Later on, histopathologic evaluations were suggestive of cherubism. No surgical interventions were indicated, and the child is on regular follow-ups.
CONCLUSION
Non-hereditary Cherubism, despite scarcity, can present in children below two years of age, even as early as the beginning of primary dentition. Accurate and swift diagnosis is essential to avert physical and psychological complications. Our case report shows the importance of keeping cherubism in mind as a differential diagnosis of bone disease, even in children under a year old, and the value of interdisciplinary collaboration in dealing with rare genetic disorders.
Topics: Humans; Cherubism; Female; Infant; Diagnosis, Differential
PubMed: 38902663
DOI: 10.1186/s12887-024-04825-9 -
Nature Communications Jun 2024Vertebrates use the phosphate mineral apatite in their skeletons, which allowed them to develop tissues such as enamel, characterized by an outstanding combination of...
Vertebrates use the phosphate mineral apatite in their skeletons, which allowed them to develop tissues such as enamel, characterized by an outstanding combination of hardness and elasticity. It has been hypothesized that the evolution of the earliest vertebrate skeletal tissues, found in the teeth of the extinct group of conodonts, was driven by adaptation to dental function. We test this hypothesis quantitatively and demonstrate that the crystallographic order increased throughout the early evolution of conodont teeth in parallel with morphological adaptation to food processing. With the c-axes of apatite crystals oriented perpendicular to the functional feeding surfaces, the strongest resistance to uniaxial compressional stress is conferred along the long axes of denticles. Our results support increasing control over biomineralization in the first skeletonized vertebrates and allow us to test models of functional morphology and material properties across conodont dental diversity.
Topics: Biomineralization; Animals; Tooth; Biological Evolution; Fossils; Apatites; Dental Enamel; Vertebrates
PubMed: 38902270
DOI: 10.1038/s41467-024-49526-0 -
Journal of Applied Oral Science :... 2024This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference...
OBJECTIVE
This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants.
METHODOLOGY
Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters.
RESULTS
The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%).
CONCLUSION
Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.
Topics: Humans; Gingiva; Cone-Beam Computed Tomography; Incisor; Maxilla; Female; Male; Adult; Young Adult; Reference Values; Reproducibility of Results; Alveolar Process; Middle Aged; Adolescent; Retrospective Studies
PubMed: 38896641
DOI: 10.1590/1678-7757-2024-0018 -
Journal of Applied Oral Science :... 2024To explore the feasibility of injectable platelet-rich fibrin (i-PRF) in regenerative endodontics by comparing the effect of i-PRF and platelet-rich fibrin (PRF) on the... (Comparative Study)
Comparative Study
OBJECTIVE
To explore the feasibility of injectable platelet-rich fibrin (i-PRF) in regenerative endodontics by comparing the effect of i-PRF and platelet-rich fibrin (PRF) on the biological behavior and angiogenesis of human stem cells from the apical papilla (SCAPs).
METHODOLOGY
i-PRF and PRF were obtained from venous blood by two different centrifugation methods, followed by hematoxylin-eosin (HE) staining and scanning electron microscopy (SEM). Enzyme-linked immunosorbent assay (ELISA) was conducted to quantify the growth factors. SCAPs were cultured with different concentrations of i-PRF extract (i-PRFe) and PRF extract (PRFe), and the optimal concentrations were selected using the Cell Counting Kit-8 (CCK-8) assay. The cell proliferation and migration potentials of SCAPs were then observed using the CCK-8 and Transwell assays. Mineralization ability was detected by alizarin red staining (ARS), and angiogenesis ability was detected by tube formation assay. Real-time quantitative polymerase chain reaction (RT-qPCR) was performed to evaluate the expression of genes related to mineralization and angiogenesis. The data were subjected to statistical analysis.
RESULTS
i-PRF and PRF showed a similar three-dimensional fibrin structure, while i-PRF released a higher concentration of growth factors than PRF ( P <.05). 1/4× i-PRFe and 1/4× PRFe were selected as the optimal concentrations. The cell proliferation rate of the i-PRFe group was higher than that of the PRFe group ( P <.05), while no statistical difference was observed between them in terms of cell mitigation ( P >.05). More importantly, our results showed that i-PRFe had a stronger effect on SCAPs than PRFe in facilitating mineralization and angiogenesis, with the consistent result of RT-qPCR ( P <.05).
CONCLUSION
This study revealed that i-PRF released a higher concentration of growth factors and was superior to PRF in promoting proliferation, mineralization and angiogenesis of SCAPs, which indicates that i-PRF could be a promising biological scaffold for application in pulp regeneration.
Topics: Platelet-Rich Fibrin; Humans; Cell Proliferation; Microscopy, Electron, Scanning; Enzyme-Linked Immunosorbent Assay; Neovascularization, Physiologic; Regenerative Endodontics; Cells, Cultured; Real-Time Polymerase Chain Reaction; Intercellular Signaling Peptides and Proteins; Reproducibility of Results; Cell Movement; Stem Cells; Time Factors; Feasibility Studies; Analysis of Variance; Dental Papilla; Reference Values
PubMed: 38896639
DOI: 10.1590/1678-7757-2023-0449 -
Journal of Applied Oral Science :... 2024To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and...
OBJECTIVE
To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and biomechanical safety under occlusal loading.
METHODOLOGY
Three-dimensional finite element models were generated for maxillary central incisors with all-ceramic crown restorations. The labiolingual diameters of the tooth, defined as the horizontal distance between the protrusion of the labial and lingual surfaces, were changed as follows: (D1) 6.85 mm, (D2) 6.35 mm, and (D3) 5.85 mm. The model was constructed as follows: (S0) vital pulp tooth; (S1) ET tooth; (S2) ET tooth with a 2 mm ferrule, restored with a fiber post and composite resin core; (S3) ET tooth without a ferrule, restored with a fiber post and composite resin core. A total of 12 models were developed. In total, two force loads (100 N) were applied to the crown's incisal edge and palatal surface at a 45° oblique angle to the longitudinal axis of the teeth. The Von Mises stress distribution and maximum stress of the models were analyzed.
RESULTS
Regardless of the loading location, stress concentration and maximum stress (34.07~66.78MPa) in all models occurred in the labial cervical 1/3 of each root. Both labiolingual diameter and construction influenced the maximum stress of the residual tooth tissue, with the impact of the labiolingual diameter being greater. A reduction in labiolingual diameter led to increased maximum stress throughout the tooth. The ferrule reduced the maximum stress of the core of S2 models (7.15~10.69 MPa), which is lower compared with that of S3 models (19.45~43.67 MPa).
CONCLUSION
The labiolingual diameter exerts a greater impact on the biomechanical characteristics of ET anterior teeth with crown restoration, surpassing the influence of the construction. The ferrule can reduce the maximum stress of the core and maintain the uniformity of stress distribution.
Topics: Finite Element Analysis; Crowns; Tooth, Nonvital; Humans; Biomechanical Phenomena; Incisor; Composite Resins; Dental Stress Analysis; Post and Core Technique; Reproducibility of Results; Stress, Mechanical; Reference Values; Bite Force; Imaging, Three-Dimensional; Dental Prosthesis Design; Materials Testing; Tooth Crown
PubMed: 38896638
DOI: 10.1590/1678-7757-2023-0439