-
One Health (Amsterdam, Netherlands) Jun 2024Livestock associated antimicrobial resistance (AMR) can reduce productivity and cause economic losses, threatening the livelihoods of poor farming communities in...
Livestock associated antimicrobial resistance (AMR) can reduce productivity and cause economic losses, threatening the livelihoods of poor farming communities in low-income settings. We investigated the practices and risk factors for increased antibiotic use, and AMR in including resistance to human critically important antibiotics like cefotaxime and colistin in semi-intensive and free-range poultry farms in Uganda. Samples and farm management data were collected from 402 poultry farms in two districts between October 2021 to March 2022. Samples were processed to isolate and to quantify cefotaxime (CTX) and colistin (COL) resistant coliforms The identification of presumptive isolated on MacConkey agar without antibiotics, was confirmed by matrix-assisted laser desorption/ionization-time of flight mass spectrometry and subjected to antimicrobial susceptibility testing by disk diffusion using EUCAST guidelines. Our models indicated that antibiotic use was associated with production intensity, and type of feed used. Moreover, semi-intensive farmers had better knowledge on antibiotic use compared to farmers in the free-range system. In semi-intensive farms, 52% harbored COL and 57% CTX coliforms. In free-range farms, 54% had COL and 67% CTX coliforms. Resistance to tetracycline, ampicillin and enrofloxacin were more frequent in semi-intensive farms compared to the free-range farms. Multi-drug resistant were identified in both poultry production systems despite different management and antibiotic use practices. There was no significant relationship between antibiotic use and resistance for the six antibiotics tested.
PubMed: 38910948
DOI: 10.1016/j.onehlt.2024.100762 -
Vision Research Jun 2024Short-term monocular deprivation in normally sighted adult humans produces a transient shift of ocular dominance, boosting the deprived eye. This effect has been...
Short-term monocular deprivation in normally sighted adult humans produces a transient shift of ocular dominance, boosting the deprived eye. This effect has been documented with both perceptual tests and through physiological recordings, but no previous study simultaneously measured physiological responses and the perceptual effects of deprivation. Here we propose an integrated experimental paradigm that combines binocular rivalry with pupillometry, to introduce an objective physiological index of ocular dominance plasticity, acquired concurrently with perceptual testing. Ten participants reported the perceptual dynamics of binocular rivalry, while we measured pupil diameter. Stimuli were a white and a black disk, each presented monocularly. Rivalry dynamics and pupil-size traces were compared before and after 2 h of monocular deprivation, achieved by applying a translucent patch over the dominant eye. Consistent with prior research, we observed that monocular deprivation boosts the deprived-eye signal and consequently increases ocular dominance. In line with previous studies, we also observed subtle but systematic modulations of pupil size that tracked alternations between exclusive dominance phases of the black or white disk. Following monocular deprivation, the amplitude of these pupil-size modulations increased, which is consistent with the post-deprivation boost of the deprived eye and the increase of ocular dominance. This provides evidence that deprivation impacts the effective strength of monocular visual stimuli, coherently affecting perceptual reports and the automatic and unconscious regulation of pupil diameter. Our results show that a combined paradigm of binocular rivalry and pupillometry gives new insights into the physiological mechanisms underlying deprivation effects.
PubMed: 38909478
DOI: 10.1016/j.visres.2024.108449 -
Colloids and Surfaces. B, Biointerfaces Jun 2024Rhamnolipids are glycolipid surfactants composed by a hydrophilic head of either one (mono-RL) or two (di-RL) rhamnose moieties coupled to hydroxyaliphatic chains that...
Rhamnolipids are glycolipid surfactants composed by a hydrophilic head of either one (mono-RL) or two (di-RL) rhamnose moieties coupled to hydroxyaliphatic chains that can be of different lengths. In spite of their importance in different fields of applications, as bioremediation processes for instance, self-aggregation physico-chemical properties of RLs are not unique. This because a variety of aggregates morphologies (shape and size) can either exist or coexist in aqueous dispersion due to mono-RL:di-RL molar ratio, hydrophobic tails length, pH and the presence of co-surfactants and additives. Recently, a theorethical approach reported the self-assembling morphologies of either pure mono or di-RL in aqueous environment, predicting the formation of spherical to ellipsoidal micelles to worm-like and disk-like aggregates depending on RL concentration and fatty acid chain length. In order to add new information to those previously available, the present work investigated the self-assembling properties of mono-RL-C10-C10 and di-RL-C10-C10 separately in aqueous dispersion by small angle X-Ray scattering (SAXS). A novel approach was applied to the data analysis coupling the scattering length density profiles of the RLs chemical groups and Monte Carlo simulations. Such an approach allowed us to infer about the preferred mono-RL and di-RL conformations that fit better in the self-assembling morphologies. In this way, we show that mono-RL-C10-C10 self-assembles into lamella-like aggregates coexisting with 30 % of multi-lamella aggregates (circa of 5 closed stacked lamella) from a concentration ranging from 10 to 50 mM, with hydrophobic thickness of about 12 Å, a hydrated polar head thickness of 10 Å, and an area per glycolipid of 76 Å. On the other hand, di-RL prefers to self-associate into flexible cylinder-like aggregates, from 70 mM to 110 mM concentration, with hydrophobic radius on the order of 7.5 Å, a hydrated polar shell of 21.5 Å, with hydropobic/polar interface of 110 Å per glycolipid. Interestingly, the parameters obtained from the best fitting to the experimental data associated to the volume fraction distribution of the chemical groups within the aggregates revealed that the hydrophobic chains are more disordered in mono-RL planar aggregates than in di-RL worm-like aggregates, as well as the hydration properties. Further, the addition of 100 mM NaCl in di-RL aqueous dispersion leads to the formation of longer worm-like aggregates. Taking together, this work opens a new avenue regarding characterization of biosurfactants self-assembling properties by using SAXS, also contributing to prepare more efficient biosurfactant dispersions depending on the desired applications in industrial sectors and bioremediation.
PubMed: 38905813
DOI: 10.1016/j.colsurfb.2024.114038 -
Health Science Reports Jun 2024as an opportunistic pathogen produces several virulence factors. This study evaluated the relative frequency of exoenzymes () A, U and S genes and integron classes (I,...
BACKGROUND
as an opportunistic pathogen produces several virulence factors. This study evaluated the relative frequency of exoenzymes () A, U and S genes and integron classes (I, II, and III) among multi-drug-resistant clinical isolates from burn patients in Ahvaz, southwest of Iran.
METHODS
In this cross-sectional study isolates were recovered from 355 wound samples. The antimicrobial susceptibility test was done by disk agar diffusion method on Muller-Hinton agar according to the Clinical and Laboratory Standards Institute. MDR isolates were defined if they showed simultaneous resistance to 3 antibiotics. Extensively drug-resistant was defined as nonsusceptibility to at least one agent in all but two or fewer antimicrobial categories. The presence of class I, II, and III integrons and virulence genes was determined using a PCR assay on extracted DNA.
RESULTS
Overall, 145 clinical isolates were confirmed with biochemical and PCR tests. Overall, 35% (52/145) of the isolates were taken from males and 64% (93/145) from female hospitalized burn patients. The highest resistance rates of isolates to antibiotics were related to piperacillin 59% ( = 86/145) and piperacillin-tazobactam 57% ( = 83/145). A total of 100% of isolates were resistant to at least one antibiotic. MDR and XDR had a frequency of 60% and 29%, respectively. The prevalence of integron classes I, II, and III in was 60%, 7.58%, and 3.44%, respectively. was more common in MDR and XDR isolates. In addition, 70(48%) of isolates did not harbor integron genes. Besides, , and in had a frequency of 55%, 55%, and 56%, respectively.
CONCLUSION
It was found that as a potent pathogen with strong virulence factors and high antibiotic resistance in the health community can cause refractory diseases in burn patients.
PubMed: 38903659
DOI: 10.1002/hsr2.2164 -
Infection and Drug Resistance 2024The most common extraintestinal pathogen and infection site is uropathogenic (UPEC), which causes urinary tract infections (UTIs). UPEC is also a common pathogen in...
OBJECTIVE
The most common extraintestinal pathogen and infection site is uropathogenic (UPEC), which causes urinary tract infections (UTIs). UPEC is also a common pathogen in bloodstream infections; in severe cases, it can lead to death. Although host and bacterial virulence factors have been demonstrated to be associated with UTI pathogenesis, the role of the related contributing factors in UTI and urinary source bacteremia is not yet fully understood. This study aimed to compare and analyze the factors contributing to urinary bacteremia in patients with UTI.
METHODS
A total of 171 strains collected from patients with UTI and urinary source bacteremia at Chiayi Christian Hospital were used. Phylogenetic groups and virulence factors were determined using PCR. Drug resistance patterns were determined using the disk diffusion assay.
RESULTS
Previous studies have demonstrated that fimbriae and papGII may be associated with first-step infections and severe UTIs, respectively. As expected, highly virulent strains (belonging to the phylogenetic B2 and D groups) were dominant in the bacteremic UTI (90%) and UTI (86.27%) groups. However, our results showed that the UTI group had a significantly higher prevalence of (belonging to the S and FIC fimbriae) than the bacteremic UTI group (29.4% vs 12.5%; p=0.008). In the bacteremic group, we found that / was only detected in highly virulent strains. The bacteremic UTI group had a significantly higher prevalence of GII (belonging to P fimbriae) than the UTI group (55.8% vs 37.3%; p=0.026). In addition, the P fimbriae gene cluster, including , and , was predominant in highly virulent strains. Notably, our results show that multidrug-resistant (MDR) strains were significantly less virulent than non MDR strains.
CONCLUSION
Taken together, our results provide insights into the contributing factors in patients with UTI and urinary bacteremia.
PubMed: 38903152
DOI: 10.2147/IDR.S458925 -
Pain Jul 2024Recent evidence highlights the importance of the neuroimmune interface, including periphery-to-central nervous system (CNS) neuroimmune crosstalk, in chronic pain....
Unraveling the neuroimmune interface in chronic pain-the association between cytokines in the cerebrospinal fluid and pain in patients with lumbar disk herniation or degenerative disk disease.
Recent evidence highlights the importance of the neuroimmune interface, including periphery-to-central nervous system (CNS) neuroimmune crosstalk, in chronic pain. Although neuroinflammatory processes have been implicated in central sensitization for a long time, their potential neuroprotective and analgesic effects remain relatively elusive. We have explored the relationships between cytokine expression and symptom severity, and candidates for periphery-to-CNS crosstalk. Patients with degenerative disk disease (DDD) (nociceptive pain) or patients with lumbar disk herniation (LDH) with radiculopathy (predominantly neuropathic pain) completed questionnaires regarding pain and functional disability, underwent quantitative sensory testing, and provided blood and cerebrospinal fluid (CSF) samples. Proximity extension assay (PEA) was used to measure the levels of 92 inflammatory proteins in the CSF and serum from a total of 160 patients and controls, and CSF/serum albumin quotients was calculated for patients with DDD and patients with LDH. We found signs of neuroimmune activation, in the absence of systemic inflammation. Regarding periphery-to-CNS neuroimmune crosstalk, there were significant associations between several cytokines and albumin quotient, despite the latter being primarily at subclinical levels. The cytokines CCL11, CD5, IL8, and MMP-10 were elevated in the CSF, had positive correlations between CSF and serum levels, and associated in a nonlinear manner with back, but not leg, pain intensity in the LDH, but not the DDD, group. In conclusion, we found evidence for neuroimmune activation in the CNS of both patient groups in the absence of systemic inflammation and signs of a communication between CSF and serum. Complex and disease-specific associations were found between cytokines in CSF and back pain intensity.
Topics: Humans; Male; Female; Cytokines; Middle Aged; Intervertebral Disc Displacement; Intervertebral Disc Degeneration; Adult; Chronic Pain; Aged; Lumbar Vertebrae; Pain Measurement; Neuroimmunomodulation
PubMed: 38900144
DOI: 10.1097/j.pain.0000000000003175 -
Health Science Reports Jun 2024Food-borne illness is a public health concern in developing countries because of improper food handling and sanitation practices, irregular medical checkups, lack of...
BACKGROUND AND AIMS
Food-borne illness is a public health concern in developing countries because of improper food handling and sanitation practices, irregular medical checkups, lack of clean water supplies, and inadequate education among food handlers. This study investigated the burden of bacterial food-borne illness, antibiotic resistance patterns, and associated factors among food handlers in prison and nonprison food establishment settings.
METHODS
A cross-sectional study was conducted from August 2022 to January 2023 among asymptomatic food handlers in Shewa Robit town. A total of 384 food handlers participated. Data were collected using structured questionnaires. Stool and hand swab samples were collected and cultivated onto MacConkey agar, xylose-lysine-deoxycholate, Mannitol salt agar, and blood agar, and incubated at 37°C. Bacterial species were identified using biochemical tests and gram staining. Mueller-Hinton agar was used in Kirby Bauer's disk diffusion method. Data were entered and analyzed using SPSS. Descriptive and logistic regression analysis were performed.
RESULTS
Fecal and hand carriage rate of bacterial isolates were 106 (27.6%), and 214 (55.7%), respectively. Out of the 102 bacterial isolates, the most common ones from stool samples were 71 (18.5%), 12 (3.1%), and spp. 7 (1.8%). Among 214 bacterial isolates, coagulase-negative 115 (29.9%) and 66 (17.3%) were identified from hand swab samples. Hand washing practice after restroom with water (adjusted odds ratio [AOR] = 2; 95% confidence interval [CI]: 1.16-3.45), irregular medical checkups (AOR = 2.49; 95% CI: 1.35-4.59), and did not receive food safety and hygiene training (AOR = 2.33; 95% CI: 1.34-4.05) were statistically significant association with food-borne illness.
CONCLUSIONS
Foodborne pathogens pose a serious health risk in the study areas. The level of antimicrobial resistance are also concerning. Food handlers should therefore get strict regular health education, medical checkups, and training programs to prevent the spread of infections to the customers.
PubMed: 38895551
DOI: 10.1002/hsr2.2199 -
RSC Advances Jun 2024Borohydride crossover in anion exchange membrane (AEM) based direct borohydride fuel cells (DBFCs) impairs their performance and induces cathode catalyst poisoning. This...
Borohydride crossover in anion exchange membrane (AEM) based direct borohydride fuel cells (DBFCs) impairs their performance and induces cathode catalyst poisoning. This study evaluates three non-precious metal catalysts, namely LaMnCoO (LMCO) perovskite, MnCoO (MCS) spinel, and Fe-N-C, for their application as cathode catalysts in DBFCs. The rotating disk electrode (RDE) testing shows significant borohydride tolerance of MCS. Moreover, MCS has exhibited exceptional stability in accelerated durability tests (ADTs), with a minimal reduction of 10 mV in half-wave potential. DFT calculations further reveal that these catalysts predominantly adsorb over , unlike commercial Pt/C which preferentially adsorbs . In DBFCs, MCS can deliver a peak power density of 1.5 W cm, and a 3% voltage loss after a 5 hours durability test. In contrast, LMCO and Fe-N-C have exhibited significantly lower peak power density and stability. The analysis of the TEM, XRD, and XPS results before and after the single-cell stability tests suggests that the diminished stability of LMCO and Fe-N-C catalysts is due to catalyst detachment from carbon supports, resulting from the nanoparticle aggregation during the high-temperature preparation process. Such findings suggest that MCS can effectively mitigate the fuel crossover challenge inherent in DBFCs, thus enhancing its viability for practical application.
PubMed: 38895534
DOI: 10.1039/d4ra02767a -
Sensors (Basel, Switzerland) May 2024The continuous scanning laser Doppler vibrometry (CSLDV) technique is usually used to evaluate the vibration operational deflection shapes (ODSs) of structures with...
The continuous scanning laser Doppler vibrometry (CSLDV) technique is usually used to evaluate the vibration operational deflection shapes (ODSs) of structures with continuous surfaces. In this paper, an extended CSLDV is demonstrated to measure the non-continuous surface of the bladed disk and to obtain the ODS efficiently. For a bladed disk, the blades are uniformly distributed on a given disk. Although the ODS of each blade can be derived from its response data along the scanning path with CSLDV, the relative vibration direction between different blades cannot be determined from those data. Therefore, it is difficult to reconstruct the complete vibration mode of the whole blade disk. In order to measure the complete ODS of the bladed disk, a method based on ODS frequency response functions (ODS FRFs) has been proposed. While the ODS of each blade is measured by designing the suitable scanning paths in CSLDV, an additional response signal is obtained at a fixed point as the reference signal to identify the relative vibration phase between the blade and the blade of the bladed disk. Finally, a measurement is performed with a simple bladed disk and the results demonstrate the feasibility and effectiveness of the proposed extended CSLDV method.
PubMed: 38894204
DOI: 10.3390/s24113413 -
Materials (Basel, Switzerland) Jun 2024Glass fiber-reinforced composite cylinders, capable of withstanding internal pressure generated during service, are increasingly utilized as insulators in high voltage...
Glass fiber-reinforced composite cylinders, capable of withstanding internal pressure generated during service, are increasingly utilized as insulators in high voltage circuit breakers. Different testing procedures have been suggested by various standards to assess the pressure resistance of these components. Due to its simplicity and cost-effectiveness, the split-disk testing method is the most widely used for evaluating the hoop strength of pressure cylinders during the development and verification phases. However, the method presents several aspects, such as those related to the influence of specimen geometry and friction, which require further examination since they may impact the outcome of the experimental tests. The investigation, carried out by a combination of experimental testing and finite element analyses, shows that the friction between the specimen and the semi-disks has a noteworthy effect on the hoop load applied to the specimen. Almost constant load distributions along the hoop direction, representative of the real operating conditions in a pressurized cylinder, can be achieved via proper lubrication of the contact surfaces. Furthermore, FE analyses demonstrate that the notch geometry suggested by specific standards (short notch) is not capable of inducing a uniform strain distribution in the notched region. A different notch geometry (long notch) is proposed in the study to attain a more uniform strain field over the reduced area region. The experimental results indicate that the strength measured on the short notch specimens is higher than that determined on the long notch specimens, thus confirming the significant influence of strain distribution on the strength properties measured with the split-disk method.
PubMed: 38894005
DOI: 10.3390/ma17112741