-
Polymers May 2024Dual networks formed by entangled polymer chains and wormlike surfactant micelles have attracted increasing interest in their application as thickeners in various fields...
Dual networks formed by entangled polymer chains and wormlike surfactant micelles have attracted increasing interest in their application as thickeners in various fields since they combine the advantages of both polymer- and surfactant-based fluids. In particular, such polymer-surfactant mixtures are of great interest as novel hydraulic fracturing fluids with enhanced properties. In this study, we demonstrated the effect of the chemical composition of an uncharged polymer poly(vinyl alcohol) (PVA) and pH on the rheological properties and structure of its mixtures with a cationic surfactant erucyl bis(hydroxyethyl)methylammonium chloride already exploited in fracturing operations. Using a combination of several complementary techniques (rheometry, cryo-transmission electron microscopy, small-angle neutron scattering, and nuclear magnetic resonance spectroscopy), we showed that a small number of residual acetate groups (2-12.7 mol%) in PVA could significantly reduce the viscosity of the mixed system. This result was attributed to the incorporation of acetate groups in the corona of the micellar aggregates, decreasing the molecular packing parameter and thereby inducing the shortening of worm-like micelles. When these groups are removed by hydrolysis at a pH higher than 7, viscosity increases by five orders of magnitude due to the growth of worm-like micelles in length. The findings of this study create pathways for the development of dual semi-interpenetrating polymer-micellar networks, which are highly desired by the petroleum industry.
PubMed: 38794623
DOI: 10.3390/polym16101430 -
Gels (Basel, Switzerland) May 2024In recent years, the quest to advance fuel cell technologies has intensified, driven by the imperative to reduce reliance on hydrocarbon-derived fuels and mitigate...
In recent years, the quest to advance fuel cell technologies has intensified, driven by the imperative to reduce reliance on hydrocarbon-derived fuels and mitigate pollutant emissions. Proton exchange membranes are a critical material of fuel cell technologies. The potential of ionic liquid-based polymer inclusion membranes or ionogels for proton exchange membrane fuel cells (PEMFCs) has recently appeared. Thermal stability, SEM-EDX characterization, NMR and IR characterization, thermogravimetric analysis, ion exchange capacity, and water uptake are key properties of these membranes which need to be investigated. In this work, ionogel based on quaternary ammonium salts, such as [N][Cl], [N][Br], and [N][Cl] in various compositions with poly(vinyl chloride) are extensively studied and characterized based on those key properties. The best properties were obtained when a quaternary ammonium cation was combined with a bromide anion. Finally, ionogels are tested in microbial fuel cells. Microbial fuel cells based on the ionogel reach a maximum of 147 mW/m, which represents 55% of the reference membrane (Nafion 212). These results indicate that we still have the possibility of improvement through the appropriate selection of the cation and anion of the ionic liquid. Overall, the promise of ionogel membranes as a viable alternative in fuel cell applications has been demonstrated.
PubMed: 38786225
DOI: 10.3390/gels10050308 -
The Science of the Total Environment Jun 2024Carbonaceous materials catalyze reductive dechlorination of chlorinated ethylenes (CEs) by iron(II) materials providing a new approach for the remediation of CE polluted...
Carbonaceous materials catalyze reductive dechlorination of chlorinated ethylenes (CEs) by iron(II) materials providing a new approach for the remediation of CE polluted groundwater. While most CEs are reduced via β-elimination, vinyl chloride (VC), the most toxic and recalcitrant CE, degrades by hydrogenolysis. The significance of carbon catalysts for reduction of VC is well documented for iron(0) systems, but hardly investigated with iron(II) materials as reductants. In this study, a layered iron(II)‑iron(III) hydroxide sulfate (green rust) was used as reductant for VC, with an N-doped graphene (NG), prepared by co-pyrolysis of graphene and urea, as catalyst. VC (80 μM) was completely reduced to ethylene within 336 h in the presence of 5 g Fe/L GR and 5 g/L NG pyrolyzed at 950 °C, following pseudo-first-order kinetics with a rate constant of 0.017 h. Dosing experiments demonstrated that dechlorination of VC takes place on the NG phase. Monitoring of hydrogen formation, cyclic voltammetry, and quenching experiments demonstrated that atomic hydrogen contributes significantly to the dehalogenation reaction, where NG is critical for formation of atomic hydrogen. CE competition experiments demonstrated the presence of specific VC reduction sites with hydrogenolysis being unaffected by concurrent β-elimination reactions. The system exhibited excellent performance in natural groundwaters and in comparison with iron(0) systems. This study demonstrates that GR + NG is a promising system for remediation of VC contaminated groundwater, and the mechanistic part of the study can be used as a reference for subsequent studies.
PubMed: 38692311
DOI: 10.1016/j.scitotenv.2024.172825 -
Chemical Science Apr 2024Poly(vinyl chloride) (PVC) is one of the highest production volume polymers due to its many applications, and it is one of the least recycled due to its chemical... (Review)
Review
Poly(vinyl chloride) (PVC) is one of the highest production volume polymers due to its many applications, and it is one of the least recycled due to its chemical structure and frequent formulation with additives. Developing efficient PVC recycling techniques would enable PVC waste to be reused or repurposed in other processes. Within this context, the literature on PVC modification offers considerable insight into versatile reaction pathways, potentially inspiring new approaches for repurposing PVC waste into value-added products. This perspective provides an overview of PVC functionalization through a lens of chemical recycling, discussing various PVC reactivity trends and their applications with a critical assessment and future outlook of their recycling implications.
PubMed: 38665509
DOI: 10.1039/d3sc06758k -
Heliyon Apr 2024In this work, magnetic molecularly imprinted polymers (MIPs) for specific recognition of Hydroxytyrosol (HT) were designed by vinyl-modified magnetic particles...
In this work, magnetic molecularly imprinted polymers (MIPs) for specific recognition of Hydroxytyrosol (HT) were designed by vinyl-modified magnetic particles (FeO@SiO@VTEOs) as carrier, ternary deep eutectic solvent (DES) as functional monomer, while ethylene glycol dimethacrylate (EGDMA) as crosslinker. The optimum amount of DES was obtained by adsorption experiments (molar ratio, caffeic acid: choline chloride: formic acid = 1:6:3) which were 140 μL in total. Under the optimized amount of DES, the maximum adsorption capacity of the MIPs particles was 42.43 mg g, which was superior to non-imprinted polymer (4.64 mg g) and the imprinting factor (IF) is 9.10. Syringin and Oleuropicrin were used as two reference molecules to test the selectivity of the DES-MIPs particles. The adsorption capacity of HT was 40.11 mg g. Three repeated experiments show that the polymer has high stability and repeatability (RSD = 5.50).
PubMed: 38655314
DOI: 10.1016/j.heliyon.2024.e28257 -
Molecules (Basel, Switzerland) Mar 2024To date, there has been limited information in the literature on the application of carbon fibre-carbon nanotube systems for the modification of poly(vinyl chloride)...
To date, there has been limited information in the literature on the application of carbon fibre-carbon nanotube systems for the modification of poly(vinyl chloride) (PVC) matrixes by micro- and nanometric fillers and an evaluation of the properties of the unique materials produced. This paper presents the results of newly designed unique multiscale composites. The advantages of the simultaneous use of carbon fibres (CFs) and carbon nanotubes (CNTs) in PVC modification are discussed. To increase the dispersibility of the nanofiller, CFs together with nanotubes were subjected to a sonication process. The resulting material was introduced into PVC blends, which were processed by extrusion. The ratio of components in the hybrid filler with CF_CNT was 20:1, and its proportion in the PVC matrix was 1, 5, and 10 wt.%, respectively. Comparatively, PVC composites modified only with carbon fibres were obtained. The structure, thermal, electrical, and mechanical properties and swelling resistance of the composites were studied. The study showed a favourable homogeneous dispersion of nanotubes in the PVC matrix. This enabled effective modification of the structure at the nanometric level and the formation of an interpenetrating network of well-dispersed hybrid filler, as evidenced by a decrease in volume resistivity and improvement in swelling resistance, as well as an increase in glass transition temperature in the case of PVC/CF_CNT composites.
PubMed: 38611759
DOI: 10.3390/molecules29071479 -
International Journal of Hygiene and... Jun 2024A growing literature has reported associations between traffic-related air pollution and breast cancer, however there are fewer investigations into specific ambient...
BACKGROUND
A growing literature has reported associations between traffic-related air pollution and breast cancer, however there are fewer investigations into specific ambient agents and any putative risk of breast cancer development, particularly studies occurring in populations residing in higher pollution areas such as Los Angeles.
OBJECTIVES
To estimate breast cancer risks related to ambient air toxics exposure at residential addresses.
METHODS
We examined the relationships between ambient air toxics and breast cancer risk in the Multiethnic Cohort among 48,665 California female participants followed for cancer from 2003 through 2013. We obtained exposure data on chemicals acting as endocrine disruptors or mammary gland carcinogens from the National-Scale Air Toxics Assessment. Cox proportional hazards models were used to estimate breast cancer risk per one interquartile range (IQR) increase in air toxics exposure lagged by 5-years. Stratified analyses were conducted by race, ethnicity, and hormone receptor types.
RESULTS
Among all women, increased risks of invasive breast cancer were observed with toxicants related to industries [1,1,2,2-tetrachloroethane (hazard ratio [HR] = 4.22, 95% confidence interval [95% CI] 3.18-5.60), ethylene dichloride (HR = 2.81, 95% CI 2.20-3.59), and vinyl chloride (HR = 2.27, 95% CI 1.81, 2.85); these 3 agents were correlated (r2 = 0.45-0.77)]. Agents related to gasoline production or combustion were related to increased breast cancer risk [benzene (HR = 1.32, 95% CI 1.24, 1.41), ethylbenzene (HR = 1.20, 95% CI 1.13-1.28), toluene (HR = 1.29, 95% CI 1.20-1.38), naphthalene (HR = 1.11, 95% CI 1.02-2.22), acrolein (HR = 2.26, 95% CI 1.92, 2.65)]. Higher hazard ratios were observed in African Americans and Whites compared to other racial and ethnic groups (p-heterogeneity <0.05 for traffic-related air toxics, acrolein, and vinyl acetate).
CONCLUSIONS
Our findings suggest that specific toxic air pollutants may be associated with increase breast cancer risk.
Topics: Humans; Breast Neoplasms; Female; Middle Aged; Air Pollutants; Aged; Cohort Studies; Environmental Exposure; California; Adult; Risk Factors; Los Angeles; Proportional Hazards Models
PubMed: 38574449
DOI: 10.1016/j.ijheh.2024.114362 -
Science Advances Apr 2024Hydrogen chloride is produced as a by-product in industrial processes on a million-ton scale. Since HCl is inherently dangerous, its storage and transport are avoided...
Hydrogen chloride is produced as a by-product in industrial processes on a million-ton scale. Since HCl is inherently dangerous, its storage and transport are avoided by, e.g., on-site electrolysis providing H and Cl which usually requires complex cell designs and PFAS-based membranes. Here we report a complementary approach to safely store 0.61 kilogram HCl per kilogram storage material [NEtMe]Cl forming the bichloride [NEtMe][Cl(HCl)]. Although HCl release is possible from this ionic liquid by heat or vacuum, the bichloride can be used directly to produce base chemicals like vinyl chloride. Alternatively, [NEtMe][Cl(HCl)] is electrolyzed under anhydrous conditions using a membrane-free cell to generate H and the corresponding chlorination agent [NEtMe][Cl(Cl)], enabling the combination of these ionic liquids for the production of base chemicals.
PubMed: 38569024
DOI: 10.1126/sciadv.adn5353 -
ACS Applied Engineering Materials Mar 2024One of the challenges preventing wide use of inorganic salt hydrate phase change materials (PCMs) is their low viscosity above their melting point, leading to leakage,... (Review)
Review
One of the challenges preventing wide use of inorganic salt hydrate phase change materials (PCMs) is their low viscosity above their melting point, leading to leakage, phase segregation, and separation from heat exchanger surfaces in thermal management applications. The development of a broad strategy for using polymers that provide tunable, temperature-reversible shape stabilization of a variety of salt hydrates by using the lowest possible polymer concentrations is hindered by differences in solubility and gelation behavior of polymers with change in the type of ion. This work addressed the challenge of creating robust, temperature-responsive shape-stabilizing polymer gels (i.e., salogels) using a low cost PCM, calcium chloride hexahydrate (CaCl·6HO, CCH). Due to the extremely high (9 M) concentration of chloride ions and the tendency to salting-out polymer chains, the previous strategy of using single-polymer salogels was not successful. Thus, this work introduced a strategy of using two polymers, poly(vinyl alcohol) and ultrahigh molecular weight polyacrylamide (PVA and PAAm, respectively), along with borax as a cross-linker to achieve temperature-reversible, shape-stable salogels. This system resulted in robust salogels whose gel-to-sol transition temperature () was tunable within an application-relevant range of gelation temperature (30-80 °C). This behavior was enabled by a synergistic combination of dynamic covalent cross-links between PVA units and entanglements of PAAm chains which were combined into a single hybrid network. The hybrid salogels had <5 wt % polymer content, maintaining ∼95% of the heat of fusion of the pure PCM. Importantly, the noncovalent nature of gelation supported thermo-reversibility of gelation, shape stability, and retention of thermal properties over 50 melting/crystallization cycles.
PubMed: 38544947
DOI: 10.1021/acsaenm.3c00522 -
The Journal of Physical Chemistry. C,... Mar 2024Mg nanoparticles are an emerging plasmonic material due to Mg's abundance and ability to sustain size- and shape-dependent localized surface plasmon resonances across a...
Mg nanoparticles are an emerging plasmonic material due to Mg's abundance and ability to sustain size- and shape-dependent localized surface plasmon resonances across a broad range of wavelengths from the ultraviolet to the near infrared. However, Mg nanoparticles are colloidally unstable due to their tendency to aggregate and sediment. Nanoparticle aggregation can be inhibited by the addition of capping agents that impart surface charges or steric repulsion. Here, we report that the common capping agents poly(vinyl) pyrrolidone (PVP), polyethylene glycol (PEG), cetyltrimethylammonium bromide (CTAB), and sodium dodecyl sulfate (SDS) interact differently and have varied effects on the aggregation and colloidal stability of Mg nanoparticles. Nanoparticles synthesized in the presence of PVP showed improvements in colloidal stability and reduced aggregation, as observed by electron microscopy and optical spectroscopy. The binding of PVP was confirmed through infrared and X-ray photoelectron spectroscopy. The influence of PVP on the reduction of di--butyl magnesium was evaluated through analysis of particle size distribution and Mg yield as a function of reaction time, reducing agent, and temperature. Furthermore, the presence of PVP drastically changes the growth pattern of metallic Mg structures obtained from the reduction of the Grignard reagents butylmagnesium chloride and phenylmagnesium chloride by lithium naphthalenide: large polycrystalline aggregates and well-separated faceted nanoparticles grow without and with PVP, respectively. This study provides new synthetic routes that generate colloidally stable and well-dispersed Mg nanoparticles for plasmonic and other applications.
PubMed: 38533241
DOI: 10.1021/acs.jpcc.4c00366