-
Bioengineering (Basel, Switzerland) Mar 2022Dental impressions are contaminated with potentially pathogenic microorganisms when they come into contact with patient blood, saliva, and plaque. Numerous disinfectants... (Review)
Review
Dental impressions are contaminated with potentially pathogenic microorganisms when they come into contact with patient blood, saliva, and plaque. Numerous disinfectants are used; however, no sole disinfectant can be designated as universal for all the impression materials. Thus, the aim of this study is to systemically review the literature to evaluate the effect of the existing disinfection procedures on the bacterial colonization of dental impression materials. This systematic review and meta-analysis was conducted according to the PRISMA statement. PubMed (MEDLINE), Web of Science, Scopus, EMBASE, and SciELO databases were screened up to April 2021. Eligibility criteria included in vitro studies reporting the antibacterial activity of disinfectant solutions in dental impression materials. The meta-analysis was performed using Review Manager (version 5.3.5). A global comparison was performed with the standardized mean difference based on random-effect models at a significance level of α = 0.05. A total of seven studies were included in the meta-analysis. The included studies described the effect of disinfection processes with chlorhexidine gluconate, alcohol, sodium hypochlorite, glutaraldehyde, and hydrogen peroxide in alginate, polyvinyl siloxane, and polyether impression materials. The meta-analyses showed that the use of chlorhexidine, alcohol, glutaraldehyde, and sodium hypochlorite reduced the colony-forming units by a milliliter (CFU/mL) in alginate (p < 0.001). On the other hand, glutaraldehyde, sodium hypochlorite, and alcohol reduced the CFU/mL in polyvinyl siloxane (p < 0.001). Finally, alcohol and glutaraldehyde reduced the CFU/mL in polyether material (p < 0.001). High heterogenicity was observed for the alginate and polyvinyl siloxane materials (I2 = 74%; I2 = 90%). Based on these in vitro studies, the disinfection of impression materials with several disinfection agents reduces the CFU/mL count.
PubMed: 35324812
DOI: 10.3390/bioengineering9030123 -
Dental Research Journal 2019Self-disinfecting impression materials would reduce time and energy needed for impression disinfecting process in clinic. The aim of this study was to evaluate the...
BACKGROUND
Self-disinfecting impression materials would reduce time and energy needed for impression disinfecting process in clinic. The aim of this study was to evaluate the antimicrobial effect of alginate mixed with nanosilver solution at a concentration of 500 ppm and 1000 ppm on common oral microorganisms and assess changes in working time, setting time, and surface detail reproduction.
MATERIALS AND METHODS
In this study, three groups were assigned. The first group was alginate, the second group was alginate mixed with 500 ppm nanosilver, and the third group was alginate mixed with 1000 ppm nanosilver. Antimicrobial effect on , , and was studied using direct contact test in each group ( = 10). Working time ( = 10), setting time ( = 10), and surface detail reproduction ( = 10) were evaluated separately using the ISO 21563 protocol. Descriptive tables were used to describe the data. Kruskal-Wallis test used to determine significant differences in the number of colonies was counted in antimicrobial test (α = 0.05).
RESULTS
No adverse effects observed in working time, setting time, and surface detail reproduction of alginate impressions. Alginate mixed with silver nanoparticles showed no inhibitory effect on and , but the number of colonies were counted in the group 1000 ppm was significantly lower than 500 ppm ( = 0.001).
CONCLUSION
Antimicrobial effect of alginate mixed with silver nanoparticles is not clinically indicated. Nevertheless, its physical features did not change significantly.
PubMed: 31803382
DOI: No ID Found -
Polymers Jul 2022The paper presents the influence of impression methods, polymer materials, and implant angulation on the accuracy of the definitive working model for the production of...
The paper presents the influence of impression methods, polymer materials, and implant angulation on the accuracy of the definitive working model for the production of implant-supported dental restorations, based on the analysis of results obtained using different impression methods, materials, and parallel and angulated implants. The study findings indicate that all aforementioned factors impact the accuracy of the definitive working model. Specifically, 20° implant angulation in relation to the vertical plane has a greater impact on the impression accuracy compared to parallel implants. The open and splint method in combination with addition silicone, as well as the splint method and polyether combination yielded more accurate results when using implants under 20° angulation compared to other method and material combinations. The splint method in combination with addition silicone resulted in the smallest mean deviations from the center of the parallel implant base compared to other combinations of methods and materials. Analysis results further revealed statistically significant differences in the measured indicators across impression methods, implants, and polymer materials.
PubMed: 35890598
DOI: 10.3390/polym14142821 -
International Journal of Dentistry 2023Dental clinicians and professionals need an affordable, nontoxic, and effective disinfectant against infectious microorganisms when dealing with the contaminated dental...
Dental clinicians and professionals need an affordable, nontoxic, and effective disinfectant against infectious microorganisms when dealing with the contaminated dental impressions. This study evaluated the efficiency of hypochlorous acid (HOCl) as an antimicrobial disinfectant by spraying technique for the alginate impression materials, compared with sodium hypochlorite, and its effect on dimensional stability and reproduction of details. HOCl with a concentration of 200 ppm for 5 and 10 min was compared with the control group (no treatment) as a negative control and with sodium hypochlorite (% 0.5) as a positive control. , , and were selected to assess the antimicrobial activity with the colony forming unit test in addition to the dimensional stability and reproduction of details tests. The results revealed that HOCl had significant antimicrobial activity against all tested microorganisms and experimental time. Interestingly, HOCl showed no impact on the dimensional stability of alginate impression material. HOCl could be an effective antimicrobial agent for alginate impression material without interfering with their surface details and dimensional stability.
PubMed: 38021346
DOI: 10.1155/2023/8584875 -
Materials (Basel, Switzerland) Mar 2024This study presents a methodology to prevent the overdesign of electric dispensers for dental impression materials by analyzing the necessary load and determining the...
This study presents a methodology to prevent the overdesign of electric dispensers for dental impression materials by analyzing the necessary load and determining the appropriate pressurization speed and drive motor capacity. We derived an equation to calculate the required torque and rotational speed of the motor based on the extrusion load and the speed of the impression material. A specialized load measurement system was developed to measure the load necessary to extrude the impression material. Through experiments and image processing, we measured the radius of curvature of the trajectory of the impression material and correlated it with the pressurization speed. Techniques such as position coordinate plotting, curve fitting, and circle fitting were employed to determine the pressurization speed that aligns with the manufacturer's recommended curvature radius. These findings led to a substantial decrease in the necessary motor torque and rotational speed compared with the current standards. This research provides a systematic approach to sizing drive motors using extrusion load and pressurization speed, aiming to reduce overdesign, power consumption, and the weight and size of the motor and battery, thereby contributing to the development of more efficient and compact dental impression material dispensers.
PubMed: 38611981
DOI: 10.3390/ma17071467 -
European Journal of Dentistry May 2022The aim of this study was to evaluate and compare penetration ability and tensile strength among vinylsiloxanether (VSE), polyether (PE), and polyvinylsiloxane (PVS)...
OBJECTIVES
The aim of this study was to evaluate and compare penetration ability and tensile strength among vinylsiloxanether (VSE), polyether (PE), and polyvinylsiloxane (PVS) elastomeric dental impression materials.
MATERIALS AND METHODS
The models were constructed for penetration ability test by simulated gingival sulcus width and moist environment. The 0.05, 0.1, and 0.2 mm of simulated gingival sulcus widths were used. Each simulated gingival sulcus width was impressed 10 repeats per one elastomeric impression material. All extension of elastomeric dental impression materials was scaled by Measuring Microscope (MM-11; Nikon, Tokyo, Japan). On the issue of the tensile strength study, the models were constructed following type 1 of the ISO 37:2017 specifications and/or type C of ASTM.D412 specifications. The two-way analysis of variance (ANOVA) and Tukey's honest significant difference test were performed in the penetration ability test. The one-way ANOVA and Dunnett's T3 test were performed in the tensile strength test. The significance level was set at 0.05.
RESULTS
PE showed the best extension into all widths of simulated sulcus followed by VSE and PVS, respectively. PVS was significantly higher in tensile strength than VSE and PE, while VSE was significantly higher than PE.
CONCLUSION
Penetration ability of elastomeric dental impression materials was depended on gingival sulcus width. The wider the sulcular width, the better the penetration ability of elastomeric dental impression materials. PE presented the best penetration ability, while the novel PVS showed highest tensile strength.
PubMed: 34852393
DOI: 10.1055/s-0041-1735793 -
Journal of Prosthodontic Research Apr 2023To determine the effect of a dynamic impression lining material (DIL) on the retention and stability of mandibular complete dentures (LCD), masticatory performance, and... (Randomized Controlled Trial)
Randomized Controlled Trial
Evaluation of dynamic impression lining material effects on masticatory function and the oral health-related quality of life of complete denture wearers: A six-month randomized controlled trial.
PURPOSE
To determine the effect of a dynamic impression lining material (DIL) on the retention and stability of mandibular complete dentures (LCD), masticatory performance, and the oral health-related quality of life (OHRQoL) of the patients wearing complete denture (CD) compared with those wearing a denture with conventional hard denture liner (HL).
METHODS
Twenty-five patients who wore CD with an ill-fitting LCD were randomly assigned to two groups: LCD relined with DIL (Dynamic impression lining material) or HL (Tokuyama® Rebase II (fast)). Three objective measures (denture retention, stability, and masticatory performance) were measured. The OHRQoL was also measured using the Thai version of oral impacts on daily performance. Outcomes were measured at six time points: baseline, 3 days, 1 week, 1 month, 3 months, and 6 months after relining. Outcome changes were analyzed using a generalized estimating equation, and all models were adjusted for age, mandibular ridge form, and CD age at a 5% significance level.
RESULTS
After LCD relining, the frequency and severity of adverse oral impacts significantly decreased. In the DIL group, denture pain occurred on and off over six months, and an ill-fitting denture impacted at one month. In the HL group, denture pain continuously decreased over time. At 3 months, changes in the clinical properties of DIL were observed, including perceived odor. The material also peel-off from the denture base, and plaque accumulation was observed. In contrast, the HL properties remained stable for over 6 months.
CONCLUSIONS
Although DIL improves denture retention and stability, masticatory performance, and the OHRQoL of the patients who wear CD, oral adverse effects were not eliminated. The clinical properties of DILs changed at 3 months, while the HL remained relatively stable for up to 6 months.(The clinical trial registration number: Thai Clinical Trials Registry (TCTR) number TCTR20210625005.).
Topics: Humans; Quality of Life; Patient Satisfaction; Denture, Complete; Dental Impression Materials; Pain; Mastication
PubMed: 35793983
DOI: 10.2186/jpr.JPR_D_22_00004 -
Journal of Orofacial Orthopedics =... Nov 2020This study investigates the accuracy of abutment transfer with current impression materials and provides a concise overview, including other relevant factors, in order...
PURPOSE
This study investigates the accuracy of abutment transfer with current impression materials and provides a concise overview, including other relevant factors, in order to enable clinicians to make an informed decision about the optimal impression for this treatment procedure.
METHODS
In all, 96 impressions of a cadaver head with two orthodontic miniscrews in place were taken with four common impression materials by two observers and using two methods of application. After pouring with a standard type IV stone and abutment transfer, all models and the upper jaw (which had been separated from the head) were scanned in a standard model scanner (Zirkonzahn® [Zirkohnzahn GmbH, Gais, Italy] S600 ARTI) and evaluated using a computer-aided design (CAD) program (GOM-Inspect [Gesellschaft für optische Messtechnik m.b.H., Braunschweig, Germany]). The deviations were measured at six points per screw and statistically evaluated with SPSS® (IBM, Chicago, IL, USA).
RESULTS
Optimal values were obtained with biphasic polyvinylsiloxane, while monophasic polyvinylsiloxane, alginate and polyether also resulted in acceptable accuracy. Observer experience showed no effect and the method of application had only a minor effect on accuracy.
CONCLUSIONS
Within the limitations of this study, it seems that all impression materials are suitable for miniscrew abutment transfer, provided that methods of intraoral adaptation of the orthodontic appliance can be employed. If higher accuracy is needed or for clinicians with less experienced, a biphasic polyvinylsiloxane impression with the putty-wash technique should be used as this combination reduces setting time. The most cost-effective version, alginate, can be used if the consequences of greater deviations can be handled. Caution is advised with polyether if undercuts are present.
Topics: Dental Impression Materials; Dental Impression Technique; Germany; Italy; Models, Dental
PubMed: 32897413
DOI: 10.1007/s00056-020-00245-3 -
Prilozi (Makedonska Akademija Na... Sep 2017A quality-made dental impression is a prerequisite for successful fixed-prosthodontic fabrication and is directly dependent on the dimensional stability, accuracy and... (Review)
Review
A quality-made dental impression is a prerequisite for successful fixed-prosthodontic fabrication and is directly dependent on the dimensional stability, accuracy and flexibility of the elastomeric impression materials, as well as on the appropriately used impression techniques. The purpose of this paper is to provide a literature review of relevant scientific papers which discuss the use of various silicone impression materials, different impression techniques and to evaluate their impact on the dimensional stability and accuracy of the obtained impressions. Scientific papers and studies were selected according to the materials used, the sample size, impression technique, storage time, type of measurements and use of spacer for the period between 2002 and 2016. In the reviewed literature several factors that influence the dimensional stability and accuracy of silicone impression molds, including the choice of the type of viscosity, impression material thickness, impression technique, retention of the impression material on the tray, storage time before the casting, number of castings, hydrophilicity of the material, release of byproducts, contraction after polymerization, thermal contraction and incomplete elastic recovery were presented. The literature review confirmed the lack of standardization of methodologies applied in the research and their great diversity. All findings point to the superiority of the addition silicone compared to the condensation silicone.
Topics: Dental Casting Technique; Dental Impression Materials; Dental Impression Technique; Humans; Models, Dental; Polymerization; Silicones; Surface Properties; Viscosity
PubMed: 28991761
DOI: 10.1515/prilozi-2017-0031 -
Australian Dental Journal Jun 2011The aim of this study was to review the literature on the restoration of single-tooth implants, and to develop evidence-based conclusions to optimize aesthetic, biologic... (Review)
Review
BACKGROUND
The aim of this study was to review the literature on the restoration of single-tooth implants, and to develop evidence-based conclusions to optimize aesthetic, biologic and patient-related outcomes.
METHODS
An electronic and hand search was conducted using the search terms 'dental implants, single-tooth; dental restoration, temporary; dental impression materials; dental impression technique; dental prosthesis, implant-supported; dental prosthesis design; dental abutments; dental occlusion; maintenance; survival; and survival analysis'. Resultant titles were screened, and full text was obtained where relevant. The authors selected the most appropriate articles, giving preference to systematic reviews and long-term, patient-based outcome data.
RESULTS
Thirty-nine articles were selected and critiqued by the authors.
CONCLUSIONS
There was strong suggestion by several authors that peri-implant soft tissue aesthetics can be sculpted through provisional restoration contour, but there are no clinical outcome studies to define or support this claim. Laboratory studies demonstrate that pick-up type impression copings in conjunction with elastomeric impressions are the most accurate means for transferring implant position to a dental cast. Laboratory and finite-element analysis studies suggest implants with an internal-type connection show improved stress distribution, but supportive clinical data are lacking. The authors of this review favour a screw-retained prosthesis for retrievability. Clinical and histological studies show that gold, titanium and zirconia ceramic abutment materials exhibit excellent biological responses, although there is insufficient data on the clinical service provided by zirconia as an implant-substructure material. The literature does not associate any particular occlusal scheme with superior clinical outcomes. Implant-borne single crowns offer comparable clinical service to tooth-borne fixed dental prostheses. However, single-tooth implant restorations are associated with an increased incidence of biological and technical complications.
Topics: Dental Abutments; Dental Implants, Single-Tooth; Dental Impression Technique; Dental Materials; Dental Occlusion; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration, Temporary; Esthetics, Dental; Humans; Treatment Outcome
PubMed: 21623811
DOI: 10.1111/j.1834-7819.2011.01322.x