-
Clinical Oral Implants Research Aug 2023To report the 1-year implant survival/success and peri-implant outcomes of mandibular overdentures retained by four titanium-zirconium mini implants (Straumann® Mini... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVE
To report the 1-year implant survival/success and peri-implant outcomes of mandibular overdentures retained by four titanium-zirconium mini implants (Straumann® Mini Implant System), and to assess how surgery and loading protocols influence these outcomes.
MATERIALS AND METHODS
A 2 × 2 factorial randomized clinical trial (RCT) tested the combined effects of two loading protocols (immediate or delayed) and two surgical approaches (flapless or flapped) on the success/survival of the mini implants, and peri-implant parameters (plaque, bleeding, sulcus depth, gingival position, and marginal bone loss). Outcomes were assessed up to 1-year after loading, and generalized estimating equations (GEEs) were used to analyze longitudinal and within-patient clustered data.
RESULTS
Two hundred and ninety-six implants were placed in 74 patients. The implant survival/success rates after 1 year were 100%, and no major biological complications were observed. After 1-year, descriptive data suggest no noticeable changes in plaque scores, whilst a reduction in bleeding scores at the 6-month and 1-year follow-ups compared to baseline. Good longitudinal stability was observed for the probing depth and gingival margin height measures. Overall mean marginal bone loss was 0.68 (±0.68) mm after 3 months and 0.89 (±0.75) mm after 1-year. The flapless protocol showed better results on soft tissue stability and health but a slightly higher risk for marginal bone loss.
CONCLUSION
The results of this RCT suggest that mandibular overdentures retained by this novel mini implant system represent a safe and predictable treatment option as confirmed by implant survival/success and peri-implant outcomes, even when flapless surgery and immediate loading protocols are adopted.
Topics: Humans; Dental Implants; Titanium; Zirconium; Denture, Overlay; Dental Implantation, Endosseous; Immediate Dental Implant Loading; Mandible; Dental Prosthesis, Implant-Supported; Treatment Outcome; Follow-Up Studies; Alveolar Bone Loss
PubMed: 37254798
DOI: 10.1111/clr.14102 -
Journal of Prosthodontics : Official... Dec 2022To estimate the effects of the thermal cycling (TC) process on the metal surfaces of Locators, as well as retention loss, and the correlation between them.
PURPOSE
To estimate the effects of the thermal cycling (TC) process on the metal surfaces of Locators, as well as retention loss, and the correlation between them.
MATERIALS AND METHODS
Twenty-five new Locator R-Tx were included in the study. Four areas were marked on each Locators' patrix metal surface and scanned using a confocal scanner (μsurf explorer; NanoFocus). Three surface roughness parameters were measured in the scans: Sa (average distance of peaks from the central plain of the area), Vmp (volume of the peaks in the area), and Spc (mean curvature of the peaks describing the degree of their sharpness). Retention test was performed using Instron® 4500 compression tension tensile tester at a speed of 10 mm/min. The retention tests were done using a working model made of two acrylic blocks in which the Locator system parts were inserted. The surface parameters measurements and the retention tests were performed 2 times, once before and once after TC. The Locators were subjected to 15,000 TC cycles by investing them into 2 tubs with different water temperatures, 55°C and 5°C. During each 60-second cycle, the Locators were submerged in each tub for 20 seconds, with a 10 second transition time between the tubs. The post-TC retention and surface parameters measurements were compared with those prior to TC and the prior to TC measurements served as controls. Changes in parameters before and after TC were analyzed by a two-way ANOVA nested model with random intercept and slope by restricted maximum likelihood method. Correlation between retention and surface parameters was quantified and examined using Kendall's correlation test. The findings were considered statistically significant if p < 0.05.
RESULTS
There was a significant decrease in retention of 16.6N at the second retention test (p < 0.001). A significant statistical decrease in surface parameters were measured after TC process, Sa and Vmp (18 ×10 μm, p = 0.041 and 0.94 ×10 1/μm, p = 0.001, respectively). A significant statistical increase in Spc of 6.4 ×10 μm /μm (p = 0.023) was noticed. The correlation between retention decreases and surface changes was not statistically significant.
CONCLUSION
The TC process causes a substantial reduction in retention to the Locator system over time. In addition, TC causes significant but minor changes to the Locator surface area. Most of the changes are in the horizontal dimension.
Topics: Denture Retention; Denture, Overlay; Dental Stress Analysis; Time Factors; Water; Surface Properties; Materials Testing
PubMed: 35061925
DOI: 10.1111/jopr.13481 -
International Journal of Environmental... Apr 2021Mini-dental implants (MDIs) have been used to support and retain overdentures, providing patients with a less invasive placement procedure. Although lucrative, the use... (Meta-Analysis)
Meta-Analysis Review
PURPOSE
Mini-dental implants (MDIs) have been used to support and retain overdentures, providing patients with a less invasive placement procedure. Although lucrative, the use of MDIs to retain a maxillary overdenture is still not an established treatment modality. This systematic review aims to answer the question: Do mini-implant-retained maxillary overdentures provide a satisfactory treatment outcome for complete edentulism?
METHODS
A systematic search for relevant articles was conducted to include articles published until April 2021 in the following electronic databases: CINAHL, Cochrane, EMBASE, PubMed, and Web of Science. All empirical studies evaluating the biological, survival, or patient-reported outcomes after placing mini-implant-retained overdentures in maxilla were considered for inclusion. The risk of bias was assessed by utilizing the Joanna Briggs Institute critical appraisal checklist. Study screening and data extraction were conducted by three reviewers independently.
RESULTS
The electronic search retrieved 1276 titles after omitting duplicates. Twenty articles were considered for full-text review, of which six studies were included in this systematic review. The included studies evaluated a total of 173 participants with a mean age of 66.3 years. The overall mini-implant survival rate was 77.1% (95% CI: 64.7-89.5%) with a mean follow-up time of 1.79 years (range: 6 months to 3 years). Implant survival differed significantly when comparing complete and partial palatal coverage overdentures. Those with complete palatal coverage exhibited less bone loss overall compared to partial coverage overdentures. Participants of all studies reported an increase in the quality of life and in satisfaction after rehabilitation treatment with MDIs.
CONCLUSIONS
The survival rate of mini-implants retaining an overdenture in the maxilla was observed to be lower than the values reported for traditional implants in the literature. Improvements were observed in all aspects in terms of patient satisfaction, quality of life, oromyofunction, and articulation after the treatment.
Topics: Aged; Denture, Overlay; Humans; Jaw, Edentulous; Maxilla; Mouth, Edentulous; Quality of Life
PubMed: 33924167
DOI: 10.3390/ijerph18084377 -
International Journal of Implant... Dec 2022To assess the implant and prosthesis survival rates, the clinical, radiographical and patient-related outcome measures, and the masticatory performance of maxillary...
PURPOSE
To assess the implant and prosthesis survival rates, the clinical, radiographical and patient-related outcome measures, and the masticatory performance of maxillary overdentures supported by two implants in patients with an atrophic maxilla.
METHODS
In this case series, 15 consecutive patients who were eligible for maxillary implant overdenture therapy, but who had insufficient bone volume to place at least four implants and were unwilling to be treated with reconstructive surgery were asked to participate. After giving consent, participants received two implants in the maxilla under local anaesthesia. After 3 months of osseointegration, a maxillary overdenture with palatal coverage and solitary attachments was fabricated. Implant and overdenture survival, marginal bone level change, clinical outcome measures, masticatory performance and patient-related outcomes were evaluated at baseline and 1 year after overdenture placement.
RESULTS
Fourteen out of 15 participants completed the follow-up period of 12 months. Implant and overdenture survival rate were 89.3% and 85.7%, respectively. Change in marginal bone level (- 0.5 ± 0.7 mm), change in probing depth (0.0 ± 1.0 mm), and clinical outcomes were favourable. Masticatory performance and patient-related outcomes improved significantly compared to baseline. Complications were minimal.
CONCLUSIONS
Within the limitations of this study, it can be concluded that patients with extreme resorption of the maxilla that are unwilling to be treated with reconstructive surgery, benefit from two-implant maxillary overdentures retained by solitary attachments in terms of improved masticatory functioning and denture satisfaction. However, they have relatively high risk of implant loss.
TRIAL REGISTRATION
UMCG Trial Register (RR201900060), registered 22 January 2019.
Topics: Humans; Jaw, Edentulous; Denture Retention; Dental Prosthesis, Implant-Supported; Dental Implants; Denture, Overlay; Atrophy
PubMed: 36484878
DOI: 10.1186/s40729-022-00460-0 -
Clinical Oral Implants Research Sep 2023To analyze the effect of implant treatment in edentulous patients rehabilitated with implant-supported fixed complete dentures (IFCDs) or implant overdentures (IODs) on... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
To analyze the effect of implant treatment in edentulous patients rehabilitated with implant-supported fixed complete dentures (IFCDs) or implant overdentures (IODs) on dental patient-reported outcomes (dPROs).
MATERIALS AND METHODS
In January 2022, Medline, Embase, CINAHL, Cochrane Library, PubMed Central, Web of Science, and ClinicalTrials.gov were screened for prospective clinical studies on completely edentulous patients treated with IFCDs and/or IODs, reporting pre-treatment and follow-up dPROs. Hedges' g effect sizes (ES) with corresponding 95% confidence intervals (CI) were calculated. Afterward, meta-analyses were conducted using random effect models.
RESULTS
A total number of 1608 records was initially identified. Of those, 28 studies reporting dPROs from 1457 patients were finally included. The applied dental patient-reported outcome measures (dPROMs) included several versions of the Oral Health Impact Profile (OHIP) or specific items assessing satisfaction with Visual Analogue Scales (VAS). The overall ES was large for rehabilitation with IFCDs (1.68 [CI: 1.15, 2.20]) and IODs (1.26 [CI: 0.99, 1.52]) with no significant difference (p = .165) between the two. Denture stability was the only factor rated significantly higher for IFCDs (ES difference: 2.37 [CI: 0.21, 4.54]; p = .032). Subgroup analyses revealed moderately higher ES for IODs on two implants relative to one implant (ES difference: 0.73 [CI: 0.34, 1.12]; p < .001).
CONCLUSIONS
There is a strong positive effect of implant treatment in edentulous patients, independent of the type of prosthetic rehabilitation. In patients seeking high stability, IFCDs may be preferable. In mandibular IODs on a single implant, there was a significantly positive effect of an additional implant on dPROs.
Topics: Humans; Denture, Overlay; Prospective Studies; Dental Implants; Denture, Complete; Mouth, Edentulous; Patient Reported Outcome Measures
PubMed: 37750530
DOI: 10.1111/clr.14065 -
Nutrients Mar 2023Tooth loss may affect food ingestion and, consequently, nutrition intake. The neuroimaging literature using functional magnetic resonance imaging (fMRI) was reviewed to... (Review)
Review
Tooth loss may affect food ingestion and, consequently, nutrition intake. The neuroimaging literature using functional magnetic resonance imaging (fMRI) was reviewed to summarize the changes in brain functions in response to denture rehabilitation in patients with partial or complete edentulous dentition. Overall, this review covered nine fMRI studies on denture rehabilitation. Eight recruited complete edentulous patients, whereas one recruited partially edentulous patients. The risk-of-bias assessment revealed concerns regarding all nine studies. Due to the heterogeneity of the studies and the lack of brain coordinates reported, a meta-analysis could not be conducted, and this review could only summarize the findings without statistical validation. The evidence from jaw-clenching studies suggested that implant-supported fixed dentures could be the best option, as compared to implant-supported overdentures and complete dentures, as it was associated with higher brain activity levels in various brain regions, including those corresponding to the primary sensory (postcentral gyrus) and motor cortices (precentral gyrus). Gum-chewing studies indicated that perhaps the medial and middle frontal gyri were associated with food comminuting and food mixing, which could be improved by the full replacement of the dental arch, instead of only partial replacement. All the fMRI studies described the functional neuroplasticity of the patients undergoing denture rehabilitation and suggested that certain rehabilitation options were more beneficial in restoring masticatory functions, as well as their associated brain activity levels.
Topics: Humans; Adult; Magnetic Resonance Imaging; Denture, Complete; Mouth, Edentulous; Denture, Overlay; Neuronal Plasticity; Mastication
PubMed: 37049418
DOI: 10.3390/nu15071577 -
International Journal of Environmental... Feb 2021(1) Background: This study aimed to investigate maximum bite force (MBF) in elderly patients with natural full dentition (FD), patients rehabilitated with Traditional...
(1) Background: This study aimed to investigate maximum bite force (MBF) in elderly patients with natural full dentition (FD), patients rehabilitated with Traditional Complete Dentures (CD), with overdentures (IRO) and edentulous patients (ED). We also tested whether MBF changes are associated with gender, age of the patients and body mass index (BMI) as result of altered food; (2) Methods: Three hundred and sixty-eight geriatric patients were included. We studied two types of prostheses: (a) IRO with telescopic attachments. (b) CD (heat polymerized polymethyl methacrylate resin). The MBF was measured using a digital dynamometer with a bite fork; (3) Results: We found that MBF is higher in males than females, regardless of teeth presence or absence ( < 0.01). In patients with CD or IRO, there are no differences between males and females; prostheses improve MBF compared to edentulous patients ( < 0.0001) and this effect is greater with IRO prostheses ( < 0.0001); the chewing force of FD subjects remains greater ( < 0.0001); there are no differences among chewing strength based on different BMI categories, although FD subjects have a reduced incidence of obesity; there is a significant negative correlation between MBF and age ( = 0.038; R = 0.145), and no correlation between MBF and BMI; (4) Conclusions: This study showed that MBF improves more in patients using IRO prostheses, although not reaching the MBF of FD subjects. MBF does not correlate with BMI, although we found increased percentages of obesity in edentulous subjects or those with prostheses. Thus, old people wearing prostheses require special attention by a nutritionist to avoid risk of malnutrition.
Topics: Aged; Bite Force; Dentition; Denture, Overlay; Female; Humans; Male; Mastication; Mouth, Edentulous
PubMed: 33546493
DOI: 10.3390/ijerph18041424 -
Journal of Indian Prosthodontic Society 2022Mandibular overdenture is suspected to fracture, especially in the midline and anterior region due to low surface area of coverage and minimum acrylic thickness in...
Mandibular overdenture is suspected to fracture, especially in the midline and anterior region due to low surface area of coverage and minimum acrylic thickness in addition to attachments pickup holes that weakens the denture. Dentures used to be conventionally reinforced with metal meshwork which cannot be done in a digital workflow. This in vitro report introduces a novel approach of digital overdenture reinforcement using computer-aided design, computer-aided manufacturing, and rapid prototyping technologies. This novel approach provided digital reinforced, stable, and well-adapted overdenture with accurate and easy attachment pickup. Digital reinforced denture has fewer clinical steps with fewer laboratory complications. The newly developed overdenture fabrication techniques have the ability to change the conventional clinical and laboratory workflow from analog to digital. Which grantee standardization of the outcome on both research and clinical work.
Topics: Denture Retention; Dental Prosthesis, Implant-Supported; Dental Implants; Denture, Overlay; Mandible
PubMed: 36511033
DOI: 10.4103/jips.jips_514_21 -
Clinical Oral Implants Research Nov 2022To compare clinical and patient-reported outcomes when providing maxillary overdentures on four and six splinted implants placed in the posterior region during a 10-year... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVE
To compare clinical and patient-reported outcomes when providing maxillary overdentures on four and six splinted implants placed in the posterior region during a 10-year follow-up period.
MATERIALS AND METHODS
Sixty-six edentulous participants with functional maxillary denture complaints and insufficient bone volume to allow implant placement were scheduled for a bone augmentation procedure. After healing, participants were randomized to receive either four or six implants in the posterior maxilla. After 3 months of osseointegration, a bar overdenture was constructed. Implant survival, overdenture survival, clinical scores, peri-implant bone height changes, and patient satisfaction were assessed.
RESULTS
Forty-six participants completed the 10-year follow-up. Implant survival was 100% in the 4-implant group and 96.7% in the 6-implant group. Seven new overdentures were made in the 4-implant group and 12 new overdentures were made in the 6-implant group due to excessive wear of the denture base and teeth. Clinical parameters did not differ significantly between groups. Mean marginal bone loss compared to baseline was 0.41 ± 0.37 mm in the 4-implant group and 0.70 ± 1.07 mm in the 6-implant group. Overall, patient satisfaction improved significantly, but did not differ between groups.
CONCLUSION
From this 10-year follow-up trial, it was concluded that bar maxillary overdentures on four or six implants in the posterior region of an augmented maxilla resulted in a comparable treatment outcome with high implant survival, limited loss of peri-implant marginal bone, and high patients' satisfaction. (Clinical trial registration number: NTR9729).
Topics: Humans; Denture, Overlay; Maxilla; Jaw, Edentulous; Denture Retention; Dental Prosthesis, Implant-Supported; Dental Implants; Treatment Outcome
PubMed: 36151932
DOI: 10.1111/clr.13997 -
Journal of Prosthodontic Research Feb 2021The purpose of this study was to evaluate the occlusal force adjusting ability of implant-supported overdenture (IOD) wearers, as compared with natural teeth and...
PURPOSE
The purpose of this study was to evaluate the occlusal force adjusting ability of implant-supported overdenture (IOD) wearers, as compared with natural teeth and complete dentures.
METHODS
Subjects were those with natural dentition (ND group; 19 subjects), those with implant-supported overdentures (IOD group; 7 subjects), and those with complete dentures (CD group; 14 subjects). Subjects were asked to hold test foods (peanuts and biscuits mounted on a custom-made apparatus with a force transducer) between their anterior incisors (hold phase) and split test foods (split phase). The mean value of the occlusal force during the hold phase (hold force), the peak force rate during the split phase (peak force rate), the time required to split test foods (duration), and the maximum occlusal force in the split phase (split force) were selected as outcomes. Data were analyzed with Wilcoxon's signed rank test, the Kruskal-Wallis test, and multiple regression analysis (Statistical significance levels: 5%).
RESULTS
For peanuts, the peak force rate for the ND group was significantly higher than the IOD and CD groups. The duration of the CD group was significantly longer than the ND and IOD groups. Multiple regression analysis indicated that even with adjustment for age and sex, there were significant differences in the peak force rate between the ND and the IOD, CD groups, and in the duration between the ND and CD group.
CONCLUSIONS
Subjects with IODs showed superior ability to adjust occlusal force, as compared with complete dentures, although it didn't match the natural dentition.
Topics: Bite Force; Dental Prosthesis, Implant-Supported; Denture Retention; Denture, Complete, Lower; Denture, Overlay; Humans; Mandible
PubMed: 32938862
DOI: 10.2186/jpr.JPOR_2019_376