-
Journal of Radiation Research Aug 2022Electron spin resonance (ESR) dosimetry was applied to human tooth enamel in order to obtain individual absorbed doses for victims of the Hiroshima bomb who lived in the...
Electron spin resonance (ESR) dosimetry was applied to human tooth enamel in order to obtain individual absorbed doses for victims of the Hiroshima bomb who lived in the 'black rain' area. The so-called 'black rain' fell in the form of precipitation on the western part of Hiroshima city and the northwestern suburbs within a few hours after the explosion of the atomic bomb on 6 August 1945, and exposed the population in this area. Only three tooth samples were collected from this area. Since the teeth were located at positions 1, 2 and 4, only the lingual portion was used for the analysis. The results showed that the excess dose after subtracting natural radiation for one (position 4; hh1) was background, for the second (position 2; hh2) it was 133 mGy, and for the other (position 1; hh3) it was 243 mGy. Based on these results, we further investigated the radiation dose attributed to dental X-rays and head CT scan. Such dose of the hh3 radiographic examination was estimated to be 57-160 mGy, which implies an additional exposure around 135 mGy after subtraction. On the other hand, the dose data of hh1 after subtracting dental X-rays was negative. This may mean that such additional doses are an overestimation. In addition, the effect of sunlight should be considered, which is the same direction of overestimation. As a result, the residual dose of 140 mGy suggests the inclusion of radiation from the 'black rain.'
Topics: Dental Enamel; Electron Spin Resonance Spectroscopy; Humans; Radiation Dosage; Radiometry; Rain
PubMed: 35968987
DOI: 10.1093/jrr/rrac024 -
International Journal of Oral Science Sep 2020Tooth enamel is prone to be attacked by injurious factors, leading to a de/remineralization imbalance. To repair demineralized enamel and prevent pulp inflammation...
Tooth enamel is prone to be attacked by injurious factors, leading to a de/remineralization imbalance. To repair demineralized enamel and prevent pulp inflammation caused by biofilm accumulation, measures are needed to promote remineralization and inhibit bacterial adhesion on the tooth surface. An innovative material, poly (aspartic acid)-polyethylene glycol (PASP-PEG), was designed and synthesized to construct a mineralizing and anti-adhesive surface that could be applied to repair demineralized enamel. A cytotoxicity assay revealed the low cytotoxicity of synthesized PASP-PEG. Adsorption results demonstrated that PASP-PEG possesses a high binding affinity to the hydroxyapatite (HA)/tooth surface. In vitro experiments and scanning electron microscopy (SEM) demonstrated a strong capacity of PASP-PEG to induce in situ remineralization and direct the oriented growth of apatite nanocrystals. Energy dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD) and Vickers hardness tests demonstrated that minerals induced by PASP-PEG were consistent with healthy enamel in Ca/P ratio, crystal form and surface micro-hardness. Contact angle tests and bacterial adhesion experiments demonstrated that PASP-PEG yielded a strong anti-adhesive effect. In summary, PASP-PEG could achieve dual effects for enamel repair and anti-adhesion of bacteria, thereby widening its application in enamel repair.
Topics: Dental Cements; Dental Enamel; Durapatite; Hardness; Tooth Remineralization
PubMed: 32994399
DOI: 10.1038/s41368-020-00097-y -
PloS One 2020To assess and compare the enamel surface quality after interproximal enamel reduction (IPR) was performed with different systems and to study the relation between acid... (Comparative Study)
Comparative Study
OBJECTIVES
To assess and compare the enamel surface quality after interproximal enamel reduction (IPR) was performed with different systems and to study the relation between acid penetration depth and enamel surface quality as well as the importance of remineralization.
METHODS
Sixty-five extracted teeth were randomly allocated to five experimental groups: untreated control, manual with New Metal Strips, mechanical with oscillating segment (OS) discs, Safe-Tipped Bur Kit, and the Ortho-Strip, followed by 30 s of polishing with the Softflex system and the Compo-system after treating the tooth with OS discs. Mesial surfaces were demineralized for 24 h and distal surfaces were subjected to interchanging demineralization and remineralization cycles of 24 h each for 18 days. The analysis was carried out by profilometry, scanning electron microscopy, and polarization microscopy.
RESULTS
After IPR and polishing, enamel roughness was reduced for all systems tested except for the Essix Safe-Tipped Bur Kit. Subsequent demineralization increased enamel roughness in all groups except controls beyond the original level prior to IPR except for IPR with New Metal Strips or Ortho-Strips and subsequent polishing. Cyclic demineralization and remineralization for 18 days yielded a reduction in acid penetration depth and an increase in surface smoothness, which correlated with each other only for controls and treatment with New Metal Strips or Ortho-Strips.
CONCLUSIONS
Manual IPR, using New Metal Strips and, even more, the oscillating IPR system Ortho-Strips, yielded smoother interproximal enamel surfaces and less acid penetration depth than the IPR systems with OS discs and the Safe-Tipped Bur Kit after polishing and 18 days of cyclic demineralization and remineralization. Irrespective of the IPR procedure, proper remineralization of IPR-treated surfaces is advisable to reduce caries susceptibility.
Topics: Dental Enamel; Dental Etching; Humans; Microscopy, Electron, Scanning; Microscopy, Polarization; Surface Properties; Tooth
PubMed: 32119700
DOI: 10.1371/journal.pone.0229595 -
PLoS Computational Biology May 2019The most mineralized tissue of the mammalian body is tooth enamel. Especially in species with thick enamel, three-dimensional (3D) tomography data has shown that the...
The most mineralized tissue of the mammalian body is tooth enamel. Especially in species with thick enamel, three-dimensional (3D) tomography data has shown that the distribution of enamel varies across the occlusal surface of the tooth crown. Differences in enamel thickness among species and within the tooth crown have been used to examine taxonomic affiliations, life history, and functional properties of teeth. Before becoming fully mineralized, enamel matrix is secreted on the top of a dentine template, and it remains to be explored how matrix thickness is spatially regulated. To provide a predictive framework to examine enamel distribution, we introduce a computational model of enamel matrix secretion that maps the dentine topography to the enamel surface topography. Starting from empirical enamel-dentine junctions, enamel matrix deposition is modeled as a diffusion-limited free boundary problem. Using laboratory microCT and synchrotron tomographic data of pig molars that have markedly different dentine and enamel surface topographies, we show how diffusion-limited matrix deposition accounts for both the process of matrix secretion and the final enamel distribution. Simulations reveal how concave and convex dentine features have distinct effects on enamel surface, thereby explaining why the enamel surface is not a straightforward extrapolation of the dentine template. Human and orangutan molar simulations show that even subtle variation in dentine topography can be mapped to the enamel surface features. Mechanistic models of extracellular matrix deposition can be used to predict occlusal morphologies of teeth.
Topics: Algorithms; Animals; Computational Biology; Computer Simulation; Dental Enamel; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Mammals; Models, Dental; Molar; Swine; Tooth; X-Ray Microtomography
PubMed: 31141513
DOI: 10.1371/journal.pcbi.1007058 -
Acta Biomaterialia Jan 2021The multi-scale hierarchical structure of tooth enamel enables it to withstand a lifetime of damage without catastrophic failure. While many previous studies have... (Review)
Review
The multi-scale hierarchical structure of tooth enamel enables it to withstand a lifetime of damage without catastrophic failure. While many previous studies have investigated structure-function relationships in enamel, the effects of crystal misorientation on mechanical performance have not been assessed. To address this issue, in the present study, we review previously published polarization-dependent imaging contrast (PIC) maps of mouse and human enamel, and parrotfish enameloid, in which crystal orientations were measured and displayed in every 60-nm-pixel. By combining those previous results with the PIC maps of sheep enamel presented here we discovered that, in all enamel(oid)s, adjacent crystals are slightly misoriented, with misorientation angles in the 0°-30° range, and mean 2°-8°. Within this limited range, misorientation is positively correlated with literature hardness values, demonstrating an important structure-property relation, not previously identified. At greater misorientation angles 8°30°, this correlation is expected to reverse direction, but data from different non-enamel systems, with more diverse crystal misorientations, are required to determine if and where this occurs. STATEMENT OF SIGNIFICANCE: We identify a structure-function relationship in tooth enamels from different species: crystal misorientation correlates with hardness, contributing to the remarkable mechanical properties of enamel in diverse animals.
Topics: Animals; Dental Enamel; Hardness; Mice; Sheep; Tooth
PubMed: 32711081
DOI: 10.1016/j.actbio.2020.07.037 -
Odontology Oct 2018Enamel is the structure that covers the entire clinical crown of a tooth. It enables to chew and crush food, and gives a final shape to the crowns of teeth. To evaluate...
Enamel is the structure that covers the entire clinical crown of a tooth. It enables to chew and crush food, and gives a final shape to the crowns of teeth. To evaluate calcium and magnesium contents in tooth enamel and analyse relationships between the study minerals extracted human permanent teeth were cut at every 150 microns and subjected into acid biopsy. The amounts of calcium and magnesium were assessed in the laboratory using atomic absorption spectroscopy with an air/acetylene flame. The lowest calcium and magnesium contents were found on the enamel surface of the teeth. Statistically significant correlation between the calcium and magnesium concentrations was found at a depth between 150 and 900 µm. Calcium and magnesium contents increased with increasing enamel depth. Calcium and magnesium deposits appeared to be stable through all the enamel layers studied. It would be suggested that mineralization/demineralization affect only external layer of the enamel, whereas deeper layers are not affected by these processes.
Topics: Adolescent; Calcium; Dental Enamel; Dentition, Permanent; Humans; In Vitro Techniques; Magnesium; Spectrophotometry, Atomic; Surface Properties; Young Adult
PubMed: 29556861
DOI: 10.1007/s10266-018-0353-6 -
Calcified Tissue International Feb 2010During amelogenesis, extracellular matrix proteins interact with growing hydroxyapatite crystals to create one of the most architecturally complex biological tissues.... (Review)
Review
During amelogenesis, extracellular matrix proteins interact with growing hydroxyapatite crystals to create one of the most architecturally complex biological tissues. The process of enamel formation is a unique biomineralizing system characterized first by an increase in crystallite length during the secretory phase of amelogenesis, followed by a vast increase in crystallite width and thickness in the later maturation phase when organic complexes are enzymatically removed. Crystal growth is modulated by changes in the pH of the enamel microenvironment that is critical for proper enamel biomineralization. Whereas the genetic bases for most abnormal enamel phenotypes (amelogenesis imperfecta) are generally associated with mutations to enamel matrix specific genes, mutations to genes involved in pH regulation may result in severely affected enamel structure, highlighting the importance of pH regulation for normal enamel development. This review summarizes the intra- and extracellular mechanisms employed by the enamel-forming cells, ameloblasts, to maintain pH homeostasis and, also, discusses the enamel phenotypes associated with disruptions to genes involved in pH regulation.
Topics: Acid-Base Equilibrium; Ameloblasts; Amelogenesis; Calcification, Physiologic; Crystallization; Dental Enamel; Extracellular Matrix; Gene Expression Regulation, Developmental; Hydrogen-Ion Concentration; Tooth
PubMed: 20016979
DOI: 10.1007/s00223-009-9326-7 -
Radiation Protection Dosimetry Dec 2016In vivo electron paramagnetic resonance biodosimetry on tooth enamel is likely to be an important technology for triage of overexposed individuals after a major... (Review)
Review
In vivo electron paramagnetic resonance biodosimetry on tooth enamel is likely to be an important technology for triage of overexposed individuals after a major radiological incident. The accuracy and robustness of the technique relies on various properties of the enamel such as the geometry of the tooth, the presence of restorations, whitening treatments or exposition to sunlight. Those factors are reviewed, and their influence on dosimetry specifically for triage purposes is discussed.
Topics: Artifacts; Biological Assay; Biomarkers; Dental Enamel; Electron Spin Resonance Spectroscopy; Humans; Radiation Exposure; Radiation Monitoring; Radioactive Hazard Release; Reproducibility of Results; Sensitivity and Specificity; Technology Assessment, Biomedical; Triage
PubMed: 27473693
DOI: 10.1093/rpd/ncw212 -
PloS One 2018Tooth crown tissue proportions and enamel thickness distribution are considered reliable characters for inferring taxonomic identity, phylogenetic relationships, dietary...
Tooth crown tissue proportions and enamel thickness distribution are considered reliable characters for inferring taxonomic identity, phylogenetic relationships, dietary and behavioural adaptations in fossil and extant hominids. While most Pleistocene hominins display variations from thick to hyper-thick enamel, Neanderthals exhibit relatively thinner. However, the chronological and geographical origin for the appearance of this typical Neanderthal condition is still unknown. The European late Early Pleistocene species Homo antecessor (Gran Dolina-TD6 site, Sierra de Atapuerca) represents an opportunity to investigate the appearance of the thin condition in the fossil record. In this study, we aim to test the hypothesis if H. antecessor molars approximates the Neanderthal condition for tissue proportions and enamel thickness. To do so, for the first time we characterised the molar inner structural organization in this Early Pleistocene hominin taxon (n = 17) and compared it to extinct and extant populations of the genus Homo from African, Asian and European origin (n = 355). The comparative sample includes maxillary and mandibular molars belonging to H. erectus, East and North African Homo, European Middle Pleistocene Homo, Neanderthals, and fossil and extant H. sapiens. We used high-resolution images to investigate the endostructural configuration of TD6 molars (tissue proportions, enamel thickness and distribution). TD6 permanent molars tend to exhibit on average thick absolute and relative enamel in 2D and 3D estimates, both in the complete crown and the lateral enamel. This condition is shared with the majority of extinct and extant hominin sample, except for Neanderthals and some isolated specimens. However, while the total crown percentage of dentine in TD6 globally resembles the low modern values, the lateral crown percentage of dentine tends to be much higher, closer to the Neanderthal signal. Similarly, the H. antecessor molar enamel distribution maps reveal a relative distribution pattern that is more similar to the Neanderthal condition (with the thickest enamel more spread at the periphery of the occlusal basin) rather than that of other fossil specimens and modern humans (with thicker cuspal enamel). Future studies on European Middle Pleistocene populations will provide more insights into the evolutionary trajectory of the typical Neanderthal dental structural organization.
Topics: Animals; Biological Evolution; Crowns; Dental Enamel; Fossils; Humans; Molar; Neanderthals; Paleodontology; Phylogeny; Spain; Tooth Crown
PubMed: 30281589
DOI: 10.1371/journal.pone.0203334 -
Femtosecond laser ablation of dentin and enamel for fast and more precise dental cavity preparation.Materials Science & Engineering. C,... Sep 2018The purpose of the present work was to achieve fast and more precise ablation in dentin and enamel by using a commercial femtosecond laser system with high repetition...
PURPOSE
The purpose of the present work was to achieve fast and more precise ablation in dentin and enamel by using a commercial femtosecond laser system with high repetition rate, whilst avoiding any collateral irreversible damages in the hard tissue and pulp area.
METHODS
We used fluence of the incident laser pulses which was marginally higher than the ablation threshold for dentin and enamel. The study was based on the hypothesis that femtosecond laser operating with a repetition rate in the range of 100-500 kHz can controllably ablate dental tissue obtaining sufficiently high removal rate whilst avoiding any collateral irreversible damages in the hard tissue and pulp area.
RESULTS
The ablation yielded the formation of 1 mm craters with well-defined precise vertical cavity sides and edges. Advantageous high porosity and numerous interconnected pores were introduced in the ablated zones. Thermal load and hence collateral thermo-mechanical damages were avoided and the crystalline structure of the tooth constituent hydroxyapatite was preserved.
CONCLUSION
The ultrafast femtosecond laser used in our work hold the promise of a significant drilling ability without collateral thermomechanical effects. It achieves high processing efficiency, overcomes disadvantages of other laser systems reported and can be used to develop an instrument for cavity preparation based on fast and precise ablation. Our further aim is to exceed the speed of traditional drilling instruments and thus to reduce the treatment time which in turn will bring comfort to the patient.
Topics: Dental Cavity Preparation; Dental Enamel; Dentin; Humans; Laser Therapy
PubMed: 29853109
DOI: 10.1016/j.msec.2018.04.070