-
The Pan African Medical Journal 2022To make a new complete denture, a series of steps is needed, and it is a time-consuming process. Which is not possible in every patient due to financial and medical... (Review)
Review
To make a new complete denture, a series of steps is needed, and it is a time-consuming process. Which is not possible in every patient due to financial and medical reasons. The old denture can be relined by denture liners in less clinical and laboratory steps and can successfully increase the efficiency of ill-fitting dentures however, patient satisfaction with denture liners is doubtful. This systematic review was organized from the preferred reporting items for systematic reviews' checklist, and the methods were registered on the international prospective register of systematic reviews (PROSPERO- CRD42020210227). The main systematic review is to assess satisfaction in convectional acrylic complete denture with or without denture liners. Search engines such as PubMed, Science Direct, Cochrane, Ovid, and Google Scholar were used to extract information. The risk of bias was measured with the help of the Cochrane collaboration tool. Initially we found 1711 articles out of which 6 were finalised as per PICO criteria. Patient satisfaction was evaluated by using a visual analogue scale and questionnaire method, which shows denture liners group has more patient satisfaction. Acrylic denture liner and silicon denture liner shows better patient satisfaction compared to the conventional acrylic denture. Among denture liners, there is no significant difference.
Topics: Humans; Denture Liners; Personal Satisfaction; Patient Satisfaction; Acrylic Resins; Denture, Complete
PubMed: 36415342
DOI: 10.11604/pamj.2022.42.296.33035 -
The Journal of Prosthetic Dentistry Aug 2021Denture base resins (DBRs), such as polymethyl methacrylate, are commonly used in the fabrication of removable dentures because of their physical, mechanical, and... (Review)
Review
STATEMENT OF PROBLEM
Denture base resins (DBRs), such as polymethyl methacrylate, are commonly used in the fabrication of removable dentures because of their physical, mechanical, and esthetic properties. However, the denture base acts as a substrate for microorganism adherence and biofilm formation, which may lead to denture stomatitis and be further complicated by fungal infections, of especial importance with geriatric and immunosuppressed patients. Therefore, methods to enhance the antimicrobial property of DBRs will be beneficial.
PURPOSE
The purpose of this systematic review was to evaluate the literature on the antimicrobial activity of DBRs incorporating antimicrobial agents or materials.
MATERIAL AND METHODS
A search of English peer-reviewed literature up to February 2019 reporting on antimicrobial activity of DBRs with respect to antimicrobial agents or materials, antimicrobial test effects and methods, and conclusion or knowledge gaps was conducted by using Embase, Google Scholar, PubMed, and Web of Science databases. Search terms included denture base resin and antibacterial, denture base resin and antifungal, and denture base resin and antimicrobial. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were applied for subsequent data analysis.
RESULTS
Of 2536 identified articles, 28 met the inclusion criteria for the systematic review. Antimicrobial materials were divided into 3 groups: antimicrobial monomer or copolymer, phytochemical or phytomedical components, and other compounds. Strategies on how to incorporate these substances into DBRs and their impact on the reduction and prevention of the growth of microorganisms were identified.
CONCLUSIONS
Although many efforts have been made to improve the antimicrobial ability of DBRs, this systematic review found that the effectiveness of incorporating of antimicrobial agents into DBRs has not been demonstrated conclusively.
Topics: Acrylic Resins; Aged; Anti-Infective Agents; Denture Bases; Esthetics, Dental; Humans; Materials Testing; Polymethyl Methacrylate
PubMed: 32800329
DOI: 10.1016/j.prosdent.2020.03.033 -
The Journal of Prosthetic Dentistry Sep 2022A consensus that establishes the indications and clinical performance of removable partial denture (RPD) frameworks designed and manufactured with computer-aided design... (Meta-Analysis)
Meta-Analysis Review
STATEMENT OF PROBLEM
A consensus that establishes the indications and clinical performance of removable partial denture (RPD) frameworks designed and manufactured with computer-aided design and computer-aided manufacturing (CAD-CAM) systems is lacking.
PURPOSE
The purpose of this systematic review and meta-analysis was to evaluate the currently published literature investigating different CAD-CAM methods and techniques for RPD manufacturing and their clinical performance.
MATERIAL AND METHODS
A comprehensive search of studies published up to September 2019 was performed in PubMed/MEDLINE, Web of Science, Cochrane Library, and SciELO databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA Statement) criteria and was registered and approved in the International Prospective Register of Systematic Reviews (PROSPERO: CRD42020152197). The population, intervention, comparison, outcome (PICO) question was "Do the CAD-CAM frameworks have similar performances to those fabricated by conventional techniques?" The meta-analysis included clinical and in vitro studies based on the effect size and test of Null (2-Tail) with 95% confidence interval (CI). Clinical and in vitro studies were selected and analyzed separately.
RESULTS
A total of 15 articles out of 358 were selected. For clinical studies, quantitative analysis with a sample of 25 participants showed a mean discrepancy between occlusal rests and rest seats of 184.91 μm (95% CI: 152.6 μm-217.15 μm) and heterogeneity (I) of 0%. Clinical data considered that frameworks were acceptable for continuity of treatment. The predominant materials were cobalt-chromium (Co-Cr) and polyetheretherketone (PEEK), and studies using Co-Cr reported that the structure required adjustments. In addition, it has been reported that the indirect technique was time-consuming and selective laser melting (SLM) can be costly. PEEK structures have been more widely accepted because of improved esthetics. Quantitative data from the in vitro studies revealed that the additive manufacturing technique (2.006 mm: 95% CI: -2.021 mm to 6.032 mm) was not significantly different from the indirect technique (0.026 mm; P=.455; random: I: 98.402%).
CONCLUSIONS
Clinical studies and in vitro research on CAD-CAM planning and manufacturing of removable prosthesis frameworks are still sparse. However, preliminary data indicate a similar fit and esthetic improvement when compared with the conventional technique.
Topics: Benzophenones; Chromium; Cobalt; Computer-Aided Design; Computers; Denture, Partial, Removable; Esthetics, Dental; Humans; Polymers; Technology
PubMed: 33581866
DOI: 10.1016/j.prosdent.2020.06.006 -
The Journal of Prosthetic Dentistry Sep 2023Digital workflows for digital complete denture fabrication have a variety of clinical and laboratory procedures, but their outcomes and associated complications are... (Review)
Review
STATEMENT OF PROBLEM
Digital workflows for digital complete denture fabrication have a variety of clinical and laboratory procedures, but their outcomes and associated complications are currently unknown.
PURPOSE
The purpose of this systematic review was to evaluate the clinical and laboratory procedures for digital complete dentures, their outcomes, and associated complications.
MATERIAL AND METHODS
Electronic literature searches were conducted on PubMed/Medline, Embase, and Web of Science for studies published from January 2000 to September 2022 and screened by 2 independent reviewers. Information on digital complete denture procedures, materials, their outcomes, and associated complications was extracted.
RESULTS
Of 266 screened studies, 39 studies were included. While 26 assessed definitive complete dentures, 7 studies assessed denture bases, 2 assessed trial dentures, and 4 assessed the digital images only. Twenty-four studies used border molded impression technique, 3 studies used a facebow record, and 7 studies used gothic arch tracing. Only 13 studies performed trial denture placement. Twenty-one studies used milling, and 17 studies used 3D printing for denture fabrication. One study reported that the retention of maxillary denture bases fabricated from a border-molded impression (14.5 to 16.1 N) was statistically higher than the retention of those fabricated from intraoral scanning (6.2 to 6.6 N). The maximum occlusal force of digital complete denture wearers was similar across different fabrication procedures. When compared with the conventional workflow, digital complete dentures required statistically shorter clinical time with 205 to 233 minutes saved. Up to 37.5% of participants reported loss of retention and up to 31.3% required a denture remake. In general, ≥1 extra visit and 1 to 4 unscheduled follow-up visits were needed. The outcomes for patient satisfaction and oral health-related quality of life were similar between conventional, milled, and 3D-printed complete dentures.
CONCLUSIONS
Making a border-molded impression is still preferred for better retention, and trial denture placement is still recommended to optimize the fabrication of definitive digital complete dentures.
PubMed: 37689573
DOI: 10.1016/j.prosdent.2023.07.027 -
The Journal of Prosthetic Dentistry Oct 2023An effective bond between a denture lining material and the denture base resin is necessary for proper function. Regarding the new technologies for manufacturing denture... (Review)
Review
STATEMENT OF PROBLEM
An effective bond between a denture lining material and the denture base resin is necessary for proper function. Regarding the new technologies for manufacturing denture bases, a systematic search of the literature on this topic is lacking.
PURPOSE
The purpose of this systematic review and meta-analysis was to evaluate the bond strength between denture lining material and computer-aided design and computer-aided manufacturing (CAD-CAM) denture base resin (milled and 3-dimensionally printed) versus conventional denture base resin.
MATERIAL AND METHODS
Electronic databases (PubMed/MEDLINE, Scopus, and Web of Science) were independently searched by 4 researchers for relevant studies published up to April 2023. The population, intervention, comparison, and outcome (PICO) question was: "Comparing conventional and CAD-CAM (milled and 3-dimensionally printed) denture base materials, which promote greater bond strength when associated with denture lining material?" A meta-analysis was performed based on mean ±standard deviation bond strength values between denture base resins and denture lining material with 95% confidence intervals.
RESULTS
Five in vitro studies were included. For bond strength, no difference was noted between conventional and milled denture base resin (confidence interval: -0.99 [-2.17 to 0.20]; heterogeneity: t=0.57; Chi:4.57; I=78%; P=.10), and conventional resin had better values compared with those of 3-dimensionally (3D) printed (confidence interval: 3.03 [2.40-3.66]; heterogeneity: t=0.00; Chi:0.56; I=0%; P<.001) when relined with soft materials. The milled denture base resin was better than the conventional (confidence interval: -0.85 [-1.33 to -0.38]; heterogeneity: Chi:28.87; I=93%; P<.001), with no difference between 3D printed and conventional (confidence interval: 0.18 [-4.23 to 4.59]; heterogeneity: t=16.51; Chi:130.99; I=98%; P=.94) for hard liners.
CONCLUSIONS
The bond strength between resins for milled CAD-CAM denture bases and denture lining material was similar to that of conventional denture base resin, regardless of the consistency of the denture lining material. The bond strength to 3D printed CAD-CAM resin was lower than that of the milled version.
PubMed: 37845114
DOI: 10.1016/j.prosdent.2023.09.001 -
The Journal of Contemporary Dental... Oct 2021This study aimed to determine whether the use of complete dentures has an influence on the respiratory capacity, assessed by the spirometry examination. (Review)
Review
AIM AND OBJECTIVE
This study aimed to determine whether the use of complete dentures has an influence on the respiratory capacity, assessed by the spirometry examination.
MATERIALS AND METHODS
A systematic review was conducted following the Preferred Reporting Items for Systematic Review and Meta-Analysis and registered in the International Prospective Register of Systematic Reviews (CRD42021255224). The PICO question (population/exposure/comparison/outcome) was "Does the use of complete dentures influence the respiratory capacity of a toothless subject?" A search strategy was adapted for the PubMed/MEDLINE, The Cochrane Library, OpenGrey, Lilacs, Scopus, and Embase databases. Inclusion criteria were prospective and retrospective studies. The new castle ottawa (NOS) scale and the Methodological Index for Non-randomized studies were selected to assess the quality of the included studies.
RESULTS
Four studies were selected, totalizing the evaluation of 242 participants, aged ranging from 40 to 73 years old. Two studies concluded that the use of complete dentures can negatively affect the respiratory capacity. One study stated that it did not interfere regardless of its use during spirometric measurements, and the other reported that dental prosthesis was required in cases of evaluation of the extrathoracic airways.
CONCLUSION
The use of complete dentures did not represent relevant changes from the reference values for pulmonary function in the spirometry test. Considering the results of this review, it is not yet possible to establish a clinical protocol for the use of complete dentures during the test.
CLINICAL SIGNIFICANCE
Oral rehabilitation with conventional complete dentures is widely used for the treatment of edentulism, especially in elderly patients. In addition, with aging, many complex changes in immunity and respiratory function contribute to the increase in the development of lung diseases. Therefore, it is important to establish a guidance regarding the use or not of the removable dental prostheses in the respiratory capacity test through spirometry examination.
Topics: Adult; Aged; Denture, Complete; Humans; Middle Aged; Respiratory System; Retrospective Studies; Spirometry
PubMed: 35197390
DOI: No ID Found -
The International Journal of Oral &... 2016The aim of this systematic review is to report on the current knowledge regarding patient satisfaction as a primary outcome for maxillary complete denture therapy. We... (Review)
Review
PURPOSE
The aim of this systematic review is to report on the current knowledge regarding patient satisfaction as a primary outcome for maxillary complete denture therapy. We asked, "For the maxillary edentulous patient treated using maxillary dentures, what are the patient-based outcomes regarding quality of life and treatment satisfaction."
MATERIALS AND METHODS
An electronic search of publications up to March 2014 was established using four databases: PubMed, Web of Science, Scopus, and Embase. To meet the ultimate goal of establishing clinical guidelines based on available information, prospective comparative studies, cohort prospective studies, and retrospective studies on more than 10 subjects were included. The electronic search identified 4,530 articles that were evaluated at the title, abstract, and article level to include 31 articles of interest. The patient-based outcomes and satisfaction data included were examined and reported.
RESULTS
The studies included 5,485 participants. Of these, 2,685 were identified as wearing maxillary complete dentures. Reported mean ages ranged from 59.7 to 73.6 years. A systematic review indicated that the provision of new maxillary complete dentures for edentulous patients results in improved self-reported satisfaction and oral health-related quality of life. The included reports, while providing evidence that complete denture satisfaction of participants and new dentures improve self-reported outcomes, did not include variables that influence these positive outcomes.
CONCLUSION
A broad range of evidence supports the use of complete dentures for rehabilitation of the edentulous maxilla. When considering treatment of the edentulous maxilla, the expectations of patients for esthetic and phonetic (social) rehabilitation are high and can be met using maxillary complete dentures as the mode of prosthetic rehabilitation. Patients dissatisfied with new complete dentures may be referred for dental implant therapies involving fixed or removable prostheses.
Topics: Denture Retention; Denture, Complete; Denture, Overlay; Humans; Maxilla; Mouth, Edentulous; Oral Health; Outcome Assessment, Health Care; Patient Satisfaction; Quality of Life
PubMed: 27228248
DOI: 10.11607/jomi.16suppl.g5.1 -
Journal of Oral Rehabilitation Aug 2023Masticatory dysfunction impacts food selection, nutritional intake and social activities; all of which play a vital role to ensure good general health and quality of... (Review)
Review
BACKGROUND
Masticatory dysfunction impacts food selection, nutritional intake and social activities; all of which play a vital role to ensure good general health and quality of life. Despite the rapidly ageing population, there is limited evidence regarding the risk factors that lead to masticatory dysfunction in older adults or protective factors which may help maintain masticatory ability. Furthermore, there is currently no consensus for a specific test which measures masticatory ability.
OBJECTIVES
The objectives of this scoping review are to identify the risk and protective factors associated with masticatory dysfunction and determine the most commonly used objective measure of masticatory performance.
DESIGN
A scoping review was performed using the PRISMA recommendations. MEDLINE (Ovid), Embase, Scopus and Web of Science databases were searched. Seventy-eight articles were included in this review. There were six randomised controlled trials, six interventional studies, one systematic review, one quasi-experimental study, five prospective cohort studies, 58 cross-sectional studies and one case-control study. Data were analysed for frequency of studies reporting on risk factors, protective factors and/or objective measures of masticatory performance.
RESULTS
This scoping review identified tooth loss as the most common risk factor for masticatory dysfunction. Other notable risk factors included musculoskeletal conditions such as frailty and sarcopenia, cognitive decline and malnutrition. Additionally, the review identified that the presence or addition of teeth was the main protective factor. Other protective factors included denture maintenance via liners and adhesives, textured foods, and oral exercises. Chewing gum was the most common objective measure of masticatory function, followed by the occlusal force and sieve methods.
CONCLUSIONS
This scoping review found that there was limited evidence for a causal link between each of the risk factors and masticatory dysfunction or the protective factors and the maintenance of masticatory ability in older adults. Establishing a standard method for measuring masticatory performance such as the commonly used chewing gum method and encouraging clinicians to routinely measure masticatory function will enable comparisons across multiple risk and protective factors, improving the evidence base and contributing to better patient care.
Topics: Humans; Aged; Cross-Sectional Studies; Quality of Life; Chewing Gum; Case-Control Studies; Prospective Studies; Mastication
PubMed: 37183339
DOI: 10.1111/joor.13493 -
Oral Diseases Apr 2016The objective of this study is to assess the efficacy and safety of miconazole for treating oral candidiasis. Twelve electronic databases were searched for randomized... (Meta-Analysis)
Meta-Analysis Review
The objective of this study is to assess the efficacy and safety of miconazole for treating oral candidiasis. Twelve electronic databases were searched for randomized controlled trials evaluating treatments for oral candidiasis and complemented by hand searching. The clinical and mycological outcomes, as well as adverse effects, were set as the primary outcome criteria. Seventeen trials were included in this review. Most studies were considered to have a high or moderate level of bias. Miconazole was more effective than nystatin for thrush. For HIV-infected patients, there was no significant difference in the efficacy between miconazole and other antifungals. For denture wearers, microwave therapy was significantly better than miconazole. No significant difference was found in the safety evaluation between miconazole and other treatments. The relapse rate of miconazole oral gel may be lower than that of other formulations. This systematic review and meta-analysis indicated that miconazole may be an optional choice for thrush. Microwave therapy could be an effective adjunct treatment for denture stomatitis. Miconazole oral gel may be more effective than other formulations with regard to long-term results. However, future studies that are adequately powered, large-scale, and well-designed are needed to provide higher-quality evidence for the management of oral candidiasis.
Topics: AIDS-Related Opportunistic Infections; Antifungal Agents; Candidiasis, Oral; Chewing Gum; Gels; Humans; Miconazole; Microwaves
PubMed: 26456226
DOI: 10.1111/odi.12380 -
Dentistry Journal Mar 2023The data about bond strength between digitally produced denture base resins and artificial teeth are scarce. Several studies investigated shear bond strength values of... (Review)
Review
The data about bond strength between digitally produced denture base resins and artificial teeth are scarce. Several studies investigated shear bond strength values of milled denture base resins and different types of artificial teeth. The purpose of the present study was to compare and evaluate the available evidence through a systematic review. A bibliographic search was conducted in PubMed, Scopus, and Web of Science to assess adequate studies published up to 1 June 2022. This review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. The appropriate studies that determined the shear bond strength values between milled denture base resins and artificial teeth were selected. The initial search identified 103 studies, which were included in the PRISMA 2020 flow diagram for new systematic reviews. Three studies met the inclusion criteria, and all of them present a moderate risk of bias (score 6). Two studies found no statistical differences between heat-polymerized and CAD/CAM (milled) denture base materials when attached with different types of artificial teeth, while one study showed higher values of CAD/CAM (milled) denture base materials. Bonding agents ensure bonding strength at least similar to the conventional methods. In order to improve the quality of future studies, it would be advantageous to use a larger number of specimens with standardized dimensions and a blinded testing machine operator to decrease the risk of bias.
PubMed: 36975564
DOI: 10.3390/dj11030066