-
The International Journal of... Nov 2023To verify the parameters and characteristics evaluated in 3D-printed complete denture (CD) bases and how they influence CD properties. (Review)
Review
PURPOSE
To verify the parameters and characteristics evaluated in 3D-printed complete denture (CD) bases and how they influence CD properties.
MATERIALS AND METHODS
This work was registered in Open Science Framework (osf.io/4um6v) and followed the PRISMA Extension for Scoping Reviews. A search of peer-reviewed articles published up to April 9, 2020, was performed on the PubMed, LILACS, Cochrane Library, and Science Direct databases. The review question based on the PCC (population, concept, and context) was: What printing parameters and characteristics of CD bases can influence their properties?
RESULTS
The database search resulted in 1,945 articles, and the initial screening was carried out in 1,390 articles, 17 of which were selected for inclusion in this review. The present authors verified that cleaning the prosthesis with alcohol after printing followed by a postcuring cycle influences biocompatibility and residual monomers. The printing angle influences physicomechanical properties, microbial adhesion, and tissue adaptation. Accuracy is influenced by layer thickness and manufacturing technique, which also influences retention and tissue adaptation. The incorporation of antimicrobial agents influences physicomechanical properties and antimicrobial activity. The method of union between the denture base and teeth influences mechanical strength.
CONCLUSIONS
Printed denture bases showed good adaptation to tissues and accuracy with 100-µm layer thickness, but the base must be cleaned in ethanol followed by postcuring for better biocompatibility. Nano- and microparticles can be added to provide antimicrobial activity and better resistance. The printing angle and mechanical properties must be better evaluated. Int J Prosthodont 2023;36:620-629.
Topics: Printing, Three-Dimensional; Denture, Complete; Anti-Infective Agents; Denture Bases; Surface Properties; Materials Testing
PubMed: 34003199
DOI: 10.11607/ijp.7473 -
The Journal of Prosthetic Dentistry Aug 2023Dental hygiene for institutionalized patients and recurring Candida-associated denture stomatitis remain problematic because of a patient's limited dexterity or... (Review)
Review
STATEMENT OF PROBLEM
Dental hygiene for institutionalized patients and recurring Candida-associated denture stomatitis remain problematic because of a patient's limited dexterity or inability to eliminate Candida from denture surfaces. Although there has been extensive research into antimicrobial modification of denture base resins with inorganic materials, scoping reviews of the literature to identify knowledge gaps or efficacy of inorganic antimicrobial materials in denture base resins are lacking.
PURPOSE
The purpose of this scoping review was to provide a synopsis of the efficacy of the major classes of inorganic antimicrobial materials currently incorporated into denture base resins.
MATERIAL AND METHODS
The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews was applied. Four electronic databases, including Embase, PubMed, Web of Science, and Google Scholar, were accessed for articles in the English language, up to February 2019, without restrictions on the date of publication.
RESULTS
From the 53 articles selected, 25 distinguishable inorganic materials were found and divided into 3 subgroups. Forty-three articles evaluated nanomaterials, where mostly silver ion nanoparticles and/or titanium dioxide nanoparticles were incorporated into denture base resins. Fourteen articles examined antimicrobial drugs and medications, including azole group medications, amphotericin-B, Bactekiller, chlorhexidine, Novaron, and Zeomic. Two articles classified as others explored hydroxyapatite- and fiber-incorporated denture base resins.
CONCLUSIONS
Although nanotechnology and antimicrobial medications or drugs have been successfully used to reduce Candida-associated denture stomatitis, long-term solutions are still lacking, and their disadvantages continue to outweigh their advantages.
Topics: Humans; Stomatitis, Denture; Denture Bases; Anti-Infective Agents; Candida; Nanoparticles; Materials Testing
PubMed: 34756425
DOI: 10.1016/j.prosdent.2021.09.004 -
Gerodontology Oct 2023The aim of this study was to assess the feasibility of digitally scanning dentures and 3D printing replica dentures for care home residents. The study also investigated...
OBJECTIVE
The aim of this study was to assess the feasibility of digitally scanning dentures and 3D printing replica dentures for care home residents. The study also investigated whether the process and replacement denture was acceptable to the resident.
BACKGROUND
Denture loss is a significant issue for people living in care homes and impacts on nutrition, quality of life and dignity. Denture loss is underreported, and care home residents have barriers to accessing dental care. The conventional process for remaking a denture can often take approximately 2 months with multiple clinical stages, often not feasible in adults with frailty and cognitive impairment. Scanning and 3D (3 dimensional) printing are increasingly used in dentistry, this rapidly evolving technology may provide an innovative solution to denture loss.
MATERIALS AND METHODS
A digital workflow was established using a handheld scanner and 3D printing technology. Care home residents wearing functional acrylic dentures were recruited. Dentures were scanned within the care home, and the scan was sent to a dental laboratory for 3D printing. The dentures were fitted at a subsequent visit, and semi-structured interviews were undertaken with the resident. Using thematic analysis, the feasibility of this pathway was assessed, and the use of digital scanning technology was explored.
RESULTS
Eight residents successfully had dentures scanned and replicated to a satisfactory standard. It took, on average, 10 minutes to scan a denture and 20 minutes to print the denture. All replica dentures were satisfactory to the resident. Qualitative data from semi-structured interviews showed that study participants were satisfied with denture replacements and the process. The 3 main themes that emerged were: the significance of dentures to the individual, satisfaction with the scanning process and general low self-esteem and fatigue.
CONCLUSIONS
This study has established a workflow for digitally storing dentures and replicating them satisfactorily. In the context of a care home setting, a scan of a denture can be used to provide a replacement denture if lost or broken. A large-scale study could follow now that the feasibility of this pathway has been demonstrated.
PubMed: 37899693
DOI: 10.1111/ger.12723 -
Cureus Jan 2024The absence of teeth, known as edentulism, poses considerable obstacles in prosthodontic care and greatly affects a person's well-being. Conventional complete dentures... (Review)
Review
The absence of teeth, known as edentulism, poses considerable obstacles in prosthodontic care and greatly affects a person's well-being. Conventional complete dentures frequently lead to problems like instability and insufficient retention, especially in the lower jaw. Fortunately, the introduction of dental implants has transformed the way we approach edentulous patients, as they now offer support and enhanced retention for removable prostheses, thus revolutionizing their treatment. While a consensus exists on using two implants for retaining mandibular overdentures, the associated cost may be prohibitive for economically disadvantaged individuals. As a solution, the concept of single implant-retained mandibular overdentures has emerged, catering to individuals with limited financial resources and complete tooth loss. This review explores the efficacy and suitability of the single implant overdenture approach, along with an overview of treatment options for edentulous patients, including traditional dentures, tooth-supported overdentures, and implant-supported overdentures. The preservation of bone, improvements in functional abilities, and psychological benefits associated with overdentures are discussed. Moreover, various classifications and prosthetic options for implant overdentures, specifically for mandibular cases, are presented. This literature review aims to provide a comprehensive understanding of possible treatment options and focus on the single implant-retained mandibular overdenture approach and its implications in prosthodontic rehabilitation for edentulous patients.
PubMed: 38371006
DOI: 10.7759/cureus.52486 -
The International Journal of... Dec 2023To compare the accuracy of milled versus 3D-printed complete denture bases and teeth and to assess the position of the teeth in relation to the corresponding denture...
PURPOSE
To compare the accuracy of milled versus 3D-printed complete denture bases and teeth and to assess the position of the teeth in relation to the corresponding denture bases.
MATERIALS AND METHODS
Two different manufacturing techniques were used in this study. In Group A, 10 complete dentures were digitally designed and fabricated by milling prepolymerized blocks of polymethyl methacrylate (PMMA). In Group B, 10 complete dentures were digitally designed and fabricated using a 3D-printing technique. The accuracy of the maxillary and mandibular denture bases and teeth and the positions of the teeth in relation to the corresponding denture bases were evaluated using Geomagic Control X software (Oqton). Data were presented as mean and SD values. Statistical analysis of the resultant data was performed using Student t test. The significance level was set at P ≤ .05.
RESULTS
With regard to denture bases, lower surface deviation values were found in the maxillary and mandibular milled denture bases (Group A), with values of 0.158 ± 0.024 and 0.117 ± 0.022, respectively. However, regarding the denture teeth, lower surface deviation values were found for printed teeth (Group B), with values of 0.18 ± 0.016 for the maxillary teeth and 0.153 ± 0.02 for the mandibular teeth. For positioning of the teeth in relation to the corresponding denture bases, the values were 0.4 ± 0.08 for the maxillary teeth and 1.003 ± 0.027 for the mandibular teeth.
CONCLUSIONS
The milling technique yields complete denture bases with superior accuracy, whereas printing technology produces denture teeth with better accuracy and positioning in the corresponding denture bases.
Topics: Computer-Aided Design; Denture, Complete; Printing, Three-Dimensional; Software; Maxilla; Denture Bases
PubMed: 38109400
DOI: 10.11607/ijp.7984 -
International Journal of Nanomedicine 2023The main objective of this systematic review was to evaluate the effect of coating with titanium dioxide nanoparticles (TiO nanoparticle) on the surface condition of... (Review)
Review
BACKGROUND
The main objective of this systematic review was to evaluate the effect of coating with titanium dioxide nanoparticles (TiO nanoparticle) on the surface condition of removable acrylic resin prosthetic base materials.
METHODS
Our review is registered in the PROSPERO database under the identification code CRD42023397170. Electronic database searches of PubMed, Scopus and Science Direct including studies from January 2009 to January 2023 were conducted and supplemented with manual searches. Research questions were generated in accordance with the PICO strategy. The modified Consolidated Standards of Reporting Trials (CONSORT) checklist was used to evaluate the quality of the selected studies.
RESULTS
Since the included studies were variable in design, a meta-analysis was not performed. The electronic searches retrieved 29 references that met the eligibility criteria, among which 5 studies matched the inclusion criteria for this review. Significant differences were detected between the TiO NP-coated and uncoated groups. The available data indicate that TiO NP coating elicits antimicrobial activity and improves the wear resistance of polymethylmethacrylate (PMMA) surfaces. Moreover, the nanoparticles provide high levels of glossiness and decelerate the process of color change of heat-cured acrylic resin, thus increasing the lifespan of dentures.
CONCLUSION
The collective results clearly indicate that TiO nanoparticle coating induces alterations in the surface properties of pure PMMA, enhancing the mechanical, physical and biological characteristics of the denture base material. Further studies are essential to identify the optimal thickness of coating and concentrations of nanoparticles for clinical applications.
Topics: Polymethyl Methacrylate; Denture Bases; Surface Properties; Acrylic Resins; Titanium; Materials Testing
PubMed: 38026530
DOI: 10.2147/IJN.S425702 -
Journal of Esthetic and Restorative... Oct 2023This technique aims to construct a virtual, well-adapted maxillary denture from an existing, ill-fitting denture in completely edentulous patients.
OBJECTIVE
This technique aims to construct a virtual, well-adapted maxillary denture from an existing, ill-fitting denture in completely edentulous patients.
CLINICAL CONSIDERATIONS
A functional impression is made using the loose maxillary denture, and a cone beam computed tomography (CBCT) of the entire old denture is carried out. The obtained digital imaging and communication in medicine (DICOM) file was segmented using an image computing platform software (3D slicer). The resultant Standard Tessellation Language (STL) file was 3D printed in porcelain white-like resin, then colored and characterized.
CONCLUSIONS
The technique introduces a high-quality digital denture replicate with good retention, that can replace the traditional duplication technique. It can also be used as a relining method for old dentures. This proposed digital technique reduces the number of clinical appointments while also providing a digital library for future denture manufacture.
CLINICAL SIGNIFICANCE
The proposed technique offers a high-quality digital denture replicate that can replace the traditional duplication technique. This digital technique also reduces the number of clinical appointments required for denture duplication.
Topics: Humans; Denture Design; Computer-Aided Design; Denture, Complete; Mouth, Edentulous; Dental Porcelain
PubMed: 37078539
DOI: 10.1111/jerd.13055 -
The Journal of Prosthetic Dentistry Sep 2023Denture adhesives improve the mastication of complete denture wearers. However, the impact of denture adhesives with different presentations on mastication remains... (Meta-Analysis)
Meta-Analysis Review
STATEMENT OF PROBLEM
Denture adhesives improve the mastication of complete denture wearers. However, the impact of denture adhesives with different presentations on mastication remains unclear.
PURPOSE
The purpose of this systematic review was to answer the focused question, "Do different presentations of denture adhesives affect the masticatory function of complete denture wearers?".
MATERIAL AND METHODS
This review was guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Six databases and the non-peer-reviewed literature were searched up to July 2021. Only clinical studies (randomized clinical trials and nonrandomized clinical trials) comparing the use of different denture adhesive presentations (cream, powder, or strips) were included, without language or follow-up restrictions. The risk of bias was assessed by using the Cochrane tools (RoB 2.0 and ROBINS-I). Masticatory performance, by using single and multiple sieves, masticatory performance with color-changing chewing gum (mixing ability), swallowing threshold (particle size and number of cycles), jaw kinematics, and occlusal force were considered. Meta-analyses were conducted to evaluate masticatory performance (single sieve) and occlusal force outcomes (α=.05), and the certainty of the evidence was determined with the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) evaluations.
RESULTS
Nine studies (6 randomized and 3 nonrandomized clinical trials) were included. The risk of bias was considered moderate. Meta-analyses showed no differences between cream and powder denture adhesives for masticatory performance (standard mean difference=0.02; 95% CI=-0.46 to 0.50, P=.93) or between cream and strip denture adhesives for occlusal force (mean difference=14.35; 95% CI=-11.14 to 39.84, P=.27). Similarly, in qualitative analysis, cream and powder denture adhesives' performances were similar regarding masticatory performance with color-changing chewing gum (mixing ability), occlusal force, swallowing threshold (particle size and number of cycles), and jaw kinematics (P>.05). However, for resorbed ridges, cream denture adhesive resulted in a higher masticatory performance than strip (P<.05). When comparing powder to strip denture adhesives, the occlusal force was higher in the powder group (P<.05). The certainty of evidence was very low for all evaluated outcomes.
CONCLUSIONS
Different presentations of denture adhesives seem to improve the masticatory function of complete denture wearers in a similar way. However, the qualitative analysis showed that, in patients with a resorbed ridge, a cream denture adhesive may be better than strips to improve mastication, although the certainty of evidence was very low.
Topics: Humans; Powders; Chewing Gum; Denture, Complete; Bite Force; Mastication; Adhesives
PubMed: 34772484
DOI: 10.1016/j.prosdent.2021.09.026 -
The British Journal of Dermatology May 2024Concerns regarding contact allergies and intolerance reactions to dental materials are widespread among patients. Development of novel dental materials and less frequent...
BACKGROUND
Concerns regarding contact allergies and intolerance reactions to dental materials are widespread among patients. Development of novel dental materials and less frequent amalgam use may alter sensitization profiles in patients with possible contact allergy.
OBJECTIVES
To analyse current sensitization patterns to dental materials in patients with suspected contact allergy.
METHODS
This retrospective, multicentre analysis from the Information Network of Departments of Dermatology (IVDK) selected participants from 169 834 people tested in 2005-2019 and registered with (i) an affected area of 'mouth' (and 'lips'/'perioral'), (ii) with the dental material in question belonging to one of three groups (dental filling materials, oral implants or dentures or equivalents) and (iii) with patch-testing done in parallel with the German baseline series, (dental) metal series and dental technician series.
RESULTS
A total of 2730 of 169 834 tested patients met the inclusion criteria. The patients were predominantly women (81.2%) aged ≥ 40 years (92.8%). The sensitization rates with confirmed allergic contact stomatitis in women (n = 444) were highest for metals (nickel 28.6%, palladium 21.4%, amalgam 10.9%), (meth)acrylates [2-hydroxyethyl methacrylate (HEMA) 4.8%] and the substances propolis (6.8%) and 'balsam of Peru' (11.4%). The most relevant acrylates were HEMA, 2-hydroxypropyl methacrylate, methyl methacrylate, ethylene glycol dimethacrylate and pentaerythritol triacrylate. Few men were diagnosed with allergic contact stomatitis (n = 68); sensitization rates in men were highest for propolis (14.9%) and amalgam (13.6%).
CONCLUSIONS
Allergic contact stomatitis to dental materials is rare. Patch testing should not only focus on metals such as nickel, palladium, amalgam and gold, but also (meth)acrylates and the natural substances propolis and 'balsam of Peru'.
Topics: Humans; Female; Male; Retrospective Studies; Dermatitis, Allergic Contact; Adult; Middle Aged; Dental Materials; Patch Tests; Dental Amalgam; Aged; Adolescent; Young Adult; Child; Methacrylates; Balsams; Dental Implants; Stomatitis; Propolis; Dentures; Germany; Allergens; Child, Preschool
PubMed: 38123140
DOI: 10.1093/bjd/ljad525 -
Clinical Oral Implants Research Aug 2023To report the 1-year implant survival/success and peri-implant outcomes of mandibular overdentures retained by four titanium-zirconium mini implants (Straumann® Mini... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVE
To report the 1-year implant survival/success and peri-implant outcomes of mandibular overdentures retained by four titanium-zirconium mini implants (Straumann® Mini Implant System), and to assess how surgery and loading protocols influence these outcomes.
MATERIALS AND METHODS
A 2 × 2 factorial randomized clinical trial (RCT) tested the combined effects of two loading protocols (immediate or delayed) and two surgical approaches (flapless or flapped) on the success/survival of the mini implants, and peri-implant parameters (plaque, bleeding, sulcus depth, gingival position, and marginal bone loss). Outcomes were assessed up to 1-year after loading, and generalized estimating equations (GEEs) were used to analyze longitudinal and within-patient clustered data.
RESULTS
Two hundred and ninety-six implants were placed in 74 patients. The implant survival/success rates after 1 year were 100%, and no major biological complications were observed. After 1-year, descriptive data suggest no noticeable changes in plaque scores, whilst a reduction in bleeding scores at the 6-month and 1-year follow-ups compared to baseline. Good longitudinal stability was observed for the probing depth and gingival margin height measures. Overall mean marginal bone loss was 0.68 (±0.68) mm after 3 months and 0.89 (±0.75) mm after 1-year. The flapless protocol showed better results on soft tissue stability and health but a slightly higher risk for marginal bone loss.
CONCLUSION
The results of this RCT suggest that mandibular overdentures retained by this novel mini implant system represent a safe and predictable treatment option as confirmed by implant survival/success and peri-implant outcomes, even when flapless surgery and immediate loading protocols are adopted.
Topics: Humans; Dental Implants; Titanium; Zirconium; Denture, Overlay; Dental Implantation, Endosseous; Immediate Dental Implant Loading; Mandible; Dental Prosthesis, Implant-Supported; Treatment Outcome; Follow-Up Studies; Alveolar Bone Loss
PubMed: 37254798
DOI: 10.1111/clr.14102