-
Polymers Jul 2023This study aimed to identify the optimum printing parameters for the fused filament fabrication (FFF) of acrylonitrile butadiene styrene (ABS) and polyamide (nylon), to...
This study aimed to identify the optimum printing parameters for the fused filament fabrication (FFF) of acrylonitrile butadiene styrene (ABS) and polyamide (nylon), to improve strength properties. For this purpose, the methodology of the paper involves an experimental study that used Taguchi's method to identify the effects of the infill pattern, infill density, and printing speed on the mechanical properties of the materials. ABS and nylon plastic parts were tested in tension to failure. Based on the results of the tensile tests, it was found that ABS material produced the highest ultimate tensile strength when printed using a tri-hexagonal infill pattern, 100% infill density, and a printing speed of 65 mm/s. On the other hand, nylon material exhibited a better performance when printed using an octet geometric structure, with identical other parameters.
PubMed: 37514431
DOI: 10.3390/polym15143043 -
Heliyon Nov 2023The optical charge-transfer (CT) property and the crystal structure of (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)vinyl)pyridin-1-ium chloride monohydrate salt (), which...
Color properties and non-covalent interactions in hydrated (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)-vinyl)pyridin-1-ium chloride salt: Insights from experimental and theoretical studies.
The optical charge-transfer (CT) property and the crystal structure of (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)vinyl)pyridin-1-ium chloride monohydrate salt (), which belongs to an acrylonitrile family, was studied. The title salt, , was characterized using different spectroscopy techniques and a single-crystal X-ray diffraction study combined with quantum chemical computations. The results showed that the color properties of are determined by the CT, changes in bandgap, optical absorption, and various non-covalent interactions. The HOMO-LUMO energy gaps are 5.41 eV and 5.23 eV for the precursor and salt, respectively. It was demonstrated that π-π stacking interactions lead to the formation of intercalated dimers and donor-acceptor interactions assisted by hydrogen bonds; the dimers and interactions are different between the precursor and the salt. The cation moiety is mainly stabilized by N(1)-H···Cl, and the anion is predominantly stabilized by strong O(1W)- H⋯ Cl bonds as well as the hydrogen bonds with the MeO group O(2W)-H⋯O(1) and O(2W)-H⋯O(1W). The charge transfer between cation and anion moieties in the structure is established through NBO analysis.
PubMed: 37954267
DOI: 10.1016/j.heliyon.2023.e21040 -
Polymers Apr 2024This paper presents the results of experimental investigation of the mechanical characteristics of 3D-printed acrylonitrile butadiene styrene (ABS) and its modifications...
This paper presents the results of experimental investigation of the mechanical characteristics of 3D-printed acrylonitrile butadiene styrene (ABS) and its modifications reinforced with different types of short-fiber fillers: carbon, glass, and basalt. Elastic modulus, tensile and bending strength, as well as fracture toughness were determined in series of mechanical tests for samples produced with different manufacturing parameters, such as nozzle diameter and infill angle. It was found that the use of ABS filament reinforced with the short fibers can significantly improve the mechanical properties of 3D-printed devices when the infill angle is oriented along the vector of the applied load. In such a case, the elastic modulus and tensile strength can be increased by more than 1.7 and 1.5 times, respectively. The use of a larger nozzle diameter led to the growth of tensile strength by an average of 12.5%. When the macroscopic load is applied along the normal to the printed layers, the addition of short fibers does not give much gain in mechanical properties compared to pure ABS, which was confirmed by both standard tensile and fracture toughness tests. The surface of the fractured samples was examined using scanning electronic microscopy, which allowed us to make conclusions on the type of defects as well as on the level of adhesion between the polymeric matrix and different types of short fibers.
PubMed: 38675025
DOI: 10.3390/polym16081106 -
The Science of the Total Environment Jun 2024This study investigated particle and volatile organic compound (VOC) emission rates (ER) from 3D pens, which are increasingly popular in children's toys. Nine filaments...
This study investigated particle and volatile organic compound (VOC) emission rates (ER) from 3D pens, which are increasingly popular in children's toys. Nine filaments and two 3D pens were evaluated using a flow tunnel, a scanning mobility particle sizer, a proton-transfer-reaction time-of-flight mass spectrometer for particles, and a thermal desorption-gas chromatography-mass spectrometer for VOCs. Results showed that the ERs varied with the pen type, filament, and brand. The particle ER was highest for acrylonitrile butadiene styrene (ABS), followed by polylactic acid (PLA) and polycaprolactone (PCL). Notably, ERs of 83 % and 33 % of ABS and PLA filaments exceeded the maximum allowable particle ER (MAER; 5 × 10 particles/min) for 3D printers but were lower than the VOC MAER (173 μg/min in the office). Different filaments emitted diverse VOCs; ABS emitted styrene and benzene, PLA emitted lactide, and PCL emitted phenol. While particle ERs from 3D pens were comparable to those from printers, the total VOC ERs from 3D pens were slightly lower. Caution is warranted when using 3D pens because of potential health risks, especially their prolonged use, proximity to the breathing zone, and usage by children. This study highlights the need for considering particles and VOCs when assessing the safety of 3D pens, emphasizing awareness of potential hazards, particularly in child-oriented settings.
Topics: Volatile Organic Compounds; Environmental Monitoring; Air Pollutants; Air Pollution, Indoor; Polyesters; Printing, Three-Dimensional; Particulate Matter
PubMed: 38710394
DOI: 10.1016/j.scitotenv.2024.173003 -
Biomedical Optics Express Mar 2024This study presents the development of an in-situ background-free Raman fiber probe, employing two customized double-cladding anti-resonant hollow-core fibers (AR-HCFs)....
This study presents the development of an in-situ background-free Raman fiber probe, employing two customized double-cladding anti-resonant hollow-core fibers (AR-HCFs). The Raman background noise measured in the AR-HCF probe is lower than that of a conventional multi-mode silica fiber by two orders of magnitude. A plug-in device for fiber coupling optics was designed that was compatible with a commercially available confocal Raman microscope, enabling in-situ Raman detection. The numerical aperture (NA) of both AR-HCF claddings exceeds 0.2 substantially enhancing the collection efficiency of Raman signals at the distal end of the fiber probe. The performance of our Raman fiber probe is demonstrated by characterizing samples of acrylonitrile-butadiene-styrene (ABS) plastics, alumina ceramics, and ethylene glycol solution.
PubMed: 38495691
DOI: 10.1364/BOE.517625 -
Frontiers in Public Health 2024An increasing body of research has demonstrated a correlation between pollutants from the environment and the development of cardiovascular diseases (CVD). However, the...
INTRODUCTION
An increasing body of research has demonstrated a correlation between pollutants from the environment and the development of cardiovascular diseases (CVD). However, the impact of volatile organic chemicals (VOC) on CVD remains unknown and needs further investigation.
OBJECTIVES
This study assessed whether exposure to VOC was associated with CVD in the general population.
METHODS
A cross-sectional analysis was conducted utilizing data from five survey cycles (2005-2006, 2011-2012, 2013-2014, 2015-2016, and 2017-2018) of the National Health and Nutrition Examination Survey (NHANES) program. We analyzed the association between urinary VOC metabolites (VOCs) and participants by multiple logistic regression models, further Bayesian Kernel Machine Regression (BKMR) models and Weighted Quantile Sum (WQS) regression were performed for mixture exposure analysis.
RESULTS
Total VOCs were found to be positively linked with CVD in multivariable-adjusted models (p for trend = 0.025), independent of established CVD risk variables, such as hypertension, diabetes, drinking and smoking, and total cholesterol levels. Compared with the reference quartile of total VOCs levels, the multivariable-adjusted odds ratios in increasing quartiles were 1.01 [95% confidence interval (CI): 0.78-1.31], 1.26 (95% CI: 1.05-1.21) and 1.75 (95% CI: 1.36-1.64) for total CVD. Similar positive associations were found when considering individual VOCs, including AAMA, CEMA, CYMA, 2HPMA, 3HPMA, IPM3 and MHBMA3 (acrolein, acrylamide, acrylonitrile, propylene oxide, isoprene, and 1,3-butadiene). In BKMR analysis, the overall effect of a mixture is significantly related to VOCs when all chemicals reach or exceed the 75th percentile. Moreover, in the WQS models, the most influential VOCs were found to be CEMA (40.30%), DHBMA (21.00%), and AMCC (19.70%).
CONCLUSION
The results of our study indicated that VOC was all found to have a significant association with CVD when comparing results from different models. These findings hold significant potential for public health implications and offer valuable insights for future research directions.
Topics: Humans; Volatile Organic Compounds; Nutrition Surveys; Cardiovascular Diseases; Cross-Sectional Studies; Male; Female; Middle Aged; Adult; Environmental Exposure; Risk Factors; Air Pollutants; United States; Aged
PubMed: 38846604
DOI: 10.3389/fpubh.2024.1378444 -
Cureus Feb 2024The introduction of three-dimensional (3D) printing in dentistry has mainly focused on applications such as surgical planning, computer-guided templates, and digital...
INTRODUCTION
The introduction of three-dimensional (3D) printing in dentistry has mainly focused on applications such as surgical planning, computer-guided templates, and digital impression conversions. Additive manufacturing (AM), also known as 3D printing, involves layering resin material sequentially to construct objects and is gaining recognition for its role in creating custom-made medical appliances. The field of orthodontics has also embraced this technological wave and with the advent of cost-effective printers and biocompatible resins, 3D printing has become increasingly feasible and popular in orthodontic clinics. The limitations of traditional plaster models may have prompted the emergence of 3D-printed models, but it led to enhancing treatment planning and device fabrication, particularly in orthodontics. Notable desktop printing technologies include fused deposition modelling (FDM), digital light processing (DLP), and stereolithography (SLA), each employing distinct methods and materials for fabricating appliances. Evaluating mechanical properties, like flexure strength, is crucial to determine the material's ability to withstand bending forces and thus prove useful in fabricating thermoformable appliances, surgical templates, etc. This study aims to assess the flexure strength of 3D-printed models using FDM, DLP, and SLA technology, providing insights into their suitability as replacements for conventional models and shedding some light on the durability and sustainability of 3D-printed models.
MATERIALS AND METHODOLOGY
Cuboids measuring 20 x 5 x 2 mm were cut from models, creating 10 samples per printer group. These samples underwent flexure strength testing using a three-point bending system in a universal testing machine.
RESULTS
The FDM group exhibited the highest flexure strength at 69.36 ± 6.03 MPa, while the DLP group showed the lowest flexure strength at 67.47 ± 20.58 MPa. The results can be attributed to the differences in resin materials used for fabrication, with FDM using acrylonitrile butadiene styrene (ABS) polymer and SLA/DLP using polymethyl methacrylate (PMMA), and also to the variation in their printing mechanism.
CONCLUSION
The findings affirm the suitability of FDM models for orthodontic applications, suggesting enhanced efficiency and reliability in clinical practices.
PubMed: 38496206
DOI: 10.7759/cureus.54312 -
Materials (Basel, Switzerland) Jul 2023Functionally graded materials (FGM) have attracted considerable attention in the field of composite materials and rekindled interest in research on composite materials...
Numerical Modeling of Mechanical Behavior of Functionally Graded Polylactic Acid-Acrylonitrile Benzidine Styrene Produced via Fused Deposition Modeling: Experimental Observations.
Functionally graded materials (FGM) have attracted considerable attention in the field of composite materials and rekindled interest in research on composite materials due to their unique mechanical response achieved through material design and optimization. Compared to conventional composites, FGMs offer several advantages and exceptional properties, including improved deformation resistance, improved toughness, lightness properties, and excellent recoverability. This study focused on the production of functionally graded (FG) polymer materials by the additive manufacturing (AM) method. FG structures were produced by the fused deposition modeling (FDM) method using acrylonitrile benzidine styrene (ABS) and polylactic acid (PLA) materials, and tensile tests were performed according to ASTM D638. The effects of different layer thicknesses, volume ratios, and total thicknesses on mechanical behavior were investigated. The tensile standard of materials produced by additive manufacturing introduces geometric differences. Another motivation in this study is to reveal the differences between the results according to the ASTM standard. In addition, tensile tests were carried out by producing single-layer samples at certain volume ratios to create a numerical model with the finite element method to verify the experimental data. As a result of this study, it is presented that the FG structure produced with FDM improves mechanical behavior.
PubMed: 37512451
DOI: 10.3390/ma16145177 -
Polymers Sep 2023Rotary friction welding (RFW) has no electric arc and the energy consumption during welding can be reduced as compared with conventional arc welding since it is a...
Effects of Ambient Temperature on the Mechanical Properties of Frictionally Welded Components of Polycarbonate and Acrylonitrile Butadiene Styrene Dissimilar Polymer Rods.
Rotary friction welding (RFW) has no electric arc and the energy consumption during welding can be reduced as compared with conventional arc welding since it is a solid-phase welding process. The RFW is a sustainable manufacturing process because it provides low environmental pollution and energy consumption. However, few works focus on the reliability of dissimilar polymer rods fabricated via RFW. The reliability of the frictionally welded components is also related to the ambient temperatures. This work aims to investigate the effects of ambient temperature on the mechanical properties of frictionally welded components of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) dissimilar polymer rods. It was found that the heat-affected zone width increases with increasing rotational speeds due to peak welding temperature. The Shore A surface hardness of ABS/PC weld joint does not change with the increased rotational speeds. The Shore A surface hardness in the weld joint of RFW of the ABS/PC is about Shore A 70. The bending strength was increased by about 53% when the welded parts were placed at 60-70 °C compared with bending strength at room temperature. The remarkable finding is that the bending fracture position of the weldment occurs on the ABS side. It should be pointed out that the bending strength can be determined by the placed ambient temperature according to the proposed prediction equation. The impact energy was decreased by about 33% when the welded parts were placed at 65-70 °C compared with the impact energy at room temperature. The impact energy (y) can be determined by the placed ambient temperature according to the proposed prediction equation. The peak temperature in the weld interface can be predicted by the rotational speed based on the proposed equation.
PubMed: 37688263
DOI: 10.3390/polym15173637 -
Environmental Pollution (Barking, Essex... Oct 2023The impact of microplastics (MPs, plastic particles ≤5 mm) on ecosystems is of great concern. Road surfaces represent a significant source of MPs where plastic...
The impact of microplastics (MPs, plastic particles ≤5 mm) on ecosystems is of great concern. Road surfaces represent a significant source of MPs where plastic fragments are physically and chemically reduced to MPs. However, the literature lacks information on fragmentation tendencies below 11 μm. This study aimed to characterize the occurrence of MPs in road dust in different size fractions down to 1.1 μm. Road dust was collected at five sites near a major road in Kusatsu city, Japan, and partitioned by size into 13 fractions (1.1-850 μm). The coarser fractions accounted for a greater proportion of the dust. The percentage of organic matter, determined by loss on ignition, increased as the fractions became finer. Pyrolysis-gas chromatography-mass spectrometry was used to quantify 12 types of polymers in each fraction. The dust was found to contain nine types of MP, namely, polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), polystyrene (PS), styrene/butadiene rubber (SBR), acrylonitrile/butadiene/styrene resin (ABS), polycarbonate (PC), polymethylmethacrylate (PMMA), and polyamide 66 (PA66). The total MP concentration in road dust particles by particle size fraction (concentration) began to increase from the 125-250 μm fraction and remained elevated in finer fractions down to 1.1 μm, indicating that MPs in the road dust micronized to at least 1.1 μm. However, for individual polymer types, the tendency for concentration to increase or decrease with particle size fraction varied: the concentration of some polymers, such as PE and PVC, remained elevated in fractions down to 1.1 μm; the concentration of SBR, a rubber-MP, showed a stable or decreasing trend in fractions of 7.0-11 μm and finer. Particles of PE, PVC, and some other plastics might become increasingly finer, even down to 1.1 μm. Further research is needed to understand the comminution limits of these polymers under pertinent environmental conditions.
Topics: Plastics; Microplastics; Rubber; Butadienes; Dust; Japan; Particle Size; Ecosystem; Polymers; Polyethylenes; Styrenes; Environmental Monitoring; Water Pollutants, Chemical
PubMed: 37453688
DOI: 10.1016/j.envpol.2023.122198